Just under the volume button is popping out. After about a month or so thinking it was the case - I just put on a Samsung stock case and I believed it was not attached to the phone. Turns out, today I was looking a little deeper and the glass screen is bowing up from the bottom. Another words, you can push with your thumb on the back cover and it will bulge up while the frame stays. Never been dropped or even hardly carried.
Anyone else seen or heard of this?
Nobody had any issues of the glass pushing up in the middle left side of the phone under the volume button. I might as well play the lotto then......or not.
Ok, looks like my battery is a bit swollen and may have caused it??? Anyone else notice anything?
Mines been fine
I have had mine since last November, It has been in an Otterbox for the better part of six months, I have not noticed anything like you are describing.
My phone is awesome. So is it's condition.
Related
I was wondering if anyone else had some backcover flexing. Specifically, right between the camera and the google logo. This is with the standard cover with 1750mhA battery.
It just bothers me a bit because its not perfect. :S
I definitely have some flexing there and for me, if I press my finger to the right of the camera (looking at the back) it flexes and makes a slight clicking noise. Bothers me too and I end up doing it on purpose way too much >< My friend works at the place I bought it and she let me try another back to see if it made a difference but it did the same thing so I think it's normal!
It's good to know that it's not just my phone experiencing this. Thanks of the reply.
Mine doesn't flex at all!
mine does, and the one i replaced did as well, i expect the 3rd one does the same so i didnt go back to exchange it
same to 3 of my frd's
so, if u dont like it, put 2 layers of scrotch tape on the inside of the battery cover around the camera area
Hello everyone
I just bought a Galaxy Nexus last week and I am so far very satisfied with it.
But I do have one problem with the build quality.
At the front top, with the speakerphone and front facing camera, the plastic seems a bit loose, I can push it inward a bit and it will creak.
If I will push it inward with some force it will stay there solidly for a bit, but after a while it while go out again. I'd think it should remain flush with the case in any case. I check the screws under the battery cover already, and everything there seems to be fine, nothing is loose, so I have no other idea what might cause that.
Is this a common issue, or does anyone else here have this problem? Anyone know a possible fix?
I heard about this problem when I bought my GN (it was last year in December). It is the adhesive which is supposed to keep the glass and the LCD beneath together that fails to do its job. I recommend you bringing the phone back to the store from where you bought it for a replacement. That's what I would do.
Do you have any source of that?
I did not read anything like that yet.
And I don't think that is really the problem, the screen and glass seems to be well connected, it's that it separates from the casing.
I dont know how to accurately explain this....
but my battery cover is swollen on the edge by the vol up and vol down rocker. It looks like its on right, but its almost like the metal contacts underneath are stopping it from being flush. Its bad enough I can get my fingernail in there. Anyone else seeing this?
I HATE these cheap battery covers
Had this problem to I just took mine back off and started at one end making sure to press down firmly at the contact points
sent from a galaxy note2 far far away
Unless something really odd is going on, I suggest pushing harder...
Hello there!
I bought my xperia m 10 days ago, and i am pleased so far, except for one thing..
I noticed yesterday that the removable cover has started creaking, especially on the side with no buttons where the usb port is.
Has anyone else noticed that with their device? Is this something that inevitably happens after a while, or should i try to get it replaced because of a defect?
Yes, it started happening a few days after I bought or... If it happens to others too, I'll assume it's inevitable
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Hmm I see..
Well I thought I'd ask because if it is something that is going to happen anyway, i will not bother taking it to the store.
They will have to send the phone to the service center and all that fuss just to replace the back cover, so it is not worth it.
If someone else can also confirm that this is the case with their phone I will be assured.
My phone also makes noises when pushed, most at top right and bottom left corners.
Well I take it there is nothing I can do about it then, so no point in returning it, I will have to live with it...
It is a shame though, because other than that the phone is outstanding in terms of value, I see no reason to spend any more that what I spent on this. It hits the sweet spot for me in the price/performance scale.
Has anyone found any solution to this problem?
I have tried putting little pieces of paper at the hotspots (bottom left and below the usb port in my case) but I had little success...
I am also curious to hear reports from others, maybe a silicon case can lessen the issue...
Cassius Away said:
Has anyone found any solution to this problem?
I have tried putting little pieces of paper at the hotspots (bottom left and below the usb port in my case) but I had little success...
I am also curious to hear reports from others, maybe a silicon case can lessen the issue...
Click to expand...
Click to collapse
I have silicone case, it is the same. I am thinking about using thin layer of hotglue. It can be peeled of easily.
After some experimenting I found that putting a small piece of paper (3mm tall and about 3cm long) between the phone and the cover eliminated the major creaks that where in the lower-middle left side of my phone. I just folded a piece of printer paper in two and cut it to the above dimensions. If you try it make sure to put it in a way that does not block the small plastic clips that clip on the phone.
Anyone else notice a small amount of play on the back of the tablet, about an inch and a half below the camera? There's a small area where I can push the back in a couple mm til it touches the frame(?). I'm concerned it's a manufacturing defect and the glass has come unbonded.
I exchanged mine tonight, this one seems better but there is still some play on the back case. Not a great sign on a 700 dollar tablet
It's not a defect. I've tried 5 devices, all has that little gap behind back panel. It is not suppose to be bonded there.
The why when you push and release you hear sticking and letting go? It's like glue that wont grab
No I don't have that on mine. I will double check other tablets tomorrow but as far as I remember it wasn't like it on them as well.