Hello, I Need some help guys. I Flashed this ROM, http://forum.xda-developers.com/son...ment/5-0-rockz1lbasic-lollyv1-deodex-t3085672 (Full Wipe) in the aroma installer, i think i missed to choose some options, so i pressed the back button But my Z1C froze and then i tried to restart my Phone, Now its stuck in sony Logo. How can i resolve this problem? please take note that my bootloader is locked. Thanks
Edit: Managed to fix it by flashing stock ftf via flashtool.
Try to flash stock FW with flashtool.
Related
Hey,
I've been trying to install this for the past 3 hours without success.
I have a unlocked bootloader with CWM.
I flashed the zip file not before I formatted everything. Installation did not show up any sign of errors.
But I keep getting a white screen after the FXP logo and nothing happens.
I also tried flashing .55 firmware first and then flashing Speed but to no avail.
What am I doing wrong?
Thanks!
try flash custom kernel with CWM adn support by SSpeed, and then via CWM flash ROM
I'll try that, thanks!
I'll try that, thanks!
I was running PACrom perfectly fine, I made a TWRP backup. I was trying to install AOKP 4.2.2 (which appeared to be successfully installed) and now my phone is bootlooping at the "Sony Turbo" logo, or it hangs there. I can't seem to reboot in to TWRP recovery either (power + VOL up at blue led). I tried reflashing the kernel in using fastboot tool but still the same result. Can't figure out what's wrong :/
Have unlocked BL w/o fastboot menu.
EDIT1: I also tried flashing the stock FTF for the R800a (4.0.2.A.0.42), and it's still stuck at the exact same screen (Sony Turbo logo). Which leads me to believe that it did not even flash the stock kernel.
EDIT2: Alright, nothing was working. So I decided to use the Sony PC Companion to "repair" my device. It's working now booting in to the OS (2.3.4), so I'm gonna try reflashing Turbo Kernel 3.1 and see if I still can't boot in to recovery.
EDIT3: Reflashed Turbo Kernel 3.1 successfully using FTF and Flashtool and am back on PACrom
pm2gonzales said:
I was running PACrom perfectly fine, I made a TWRP backup. I was trying to install AOKP 4.2.2 (which appeared to be successfully installed) and now my phone is bootlooping at the "Sony Turbo" logo, or it hangs there. I can't seem to reboot in to TWRP recovery either (power + VOL up at blue led). I tried reflashing the kernel in using fastboot tool but still the same result. Can't figure out what's wrong :/
Have unlocked BL w/o fastboot menu.
EDIT1: I also tried flashing the stock FTF for the R800a (4.0.2.A.0.42), and it's still stuck at the exact same screen (Sony Turbo logo). Which leads me to believe that it did not even flash the stock kernel.
EDIT2: Alright, nothing was working. So I decided to use the Sony PC Companion to "repair" my device. It's working now booting in to the OS (2.3.4), so I'm gonna try reflashing Turbo Kernel 3.1 and see if I still can't boot in to recovery.
EDIT3: Reflashed Turbo Kernel 3.1 successfully using FTF and Flashtool and am back on PACrom
Click to expand...
Click to collapse
Bro.. as far as I Know.. I am Using AOKP 4.1.2 .. and their is NO Version of AOKP 4.2.2 at all.. is that a typo.. or did u try to Install a ROM from the AOKP site which was not compatible at all..
Cuz I am using Turbo Kernel 3.1.. on AOKP 4.1.2 .. go here and check out my post.. might answer some of your questions.. with screen shots..
http://forum.xda-developers.com/showthread.php?t=1852529&page=48
EDIT 1.. if you try AOKP Once.. you wont go back to any other JB ROM again.. Its just amazing.
i wanted to install @niaboc79 's existenz ultra rom v2.. so..
i went according to the process as it was said
i did flash my phone with sony's latest firmware .2.67
i have a locked bootloader.
rooted and installed cwm.
then i put the v2 of existenz ultra rom in my internal storage..
wiped data, cache and dalvik cache..
installed the rom.
then when i pressed the reboot system now.. it said that rom may flash stock recovery on boot fix?
first i tried with yes, but it got stuck at the sony logo and would not go further.
again i did the same procedure and this time i tried no. but still it is getting stuck at the same place..
plz help... how to i get this rom running...
flash latest ftf for ZL, root then install CWM, now download existenz rom "v2" put it on your sd card, go to recovery flash the rom... you don't need wipe because you had installed ftf and it delete all (make sure no field is checked while flashing with flashtool)
i used that rom without problem... CM 10.2 now
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
jeet.dedhia said:
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
Click to expand...
Click to collapse
MP me and I will help you with/through the process
I installed cmw recovery and it worked , but after i press reboot system now it is doesn't booting and it always restarting the phone
help me pleas
3faneh said:
I installed cmw recovery and it worked , but after i press reboot system now it is doesn't booting and it always restarting the phone
help me pleas
Click to expand...
Click to collapse
Hi mate,
Try re-flashing the stock kernel via flashtool. After you've done this, try to reflash/re-install your CMW recovery.
Hi guys!
Please help me! I am about to update my XPERIA M (4.3 stock rom) to Lollipop 5.1.1, but I made a mistake in the first step.
When you install a rom you have to enable the USB debugging. I enabled it, but didn't confirm.
This means I don't have the USB debugging enable.
I successfully flashed the boot.img with fastboot, but when I'm about wipe data / factory reset, or anything else it shows a lot of error like: unable to mount /data (cause i didn't enable the usb debugging).
Tried to flash stock FTF with Flashtool, but didn't work (some kind of loader.sin error).
So I have right now a XPERIA M with cyanogen recovery, within I can't do anything, and can't flash stock ROM.
PLEASE HELP ME!
vereczkibalint said:
Hi guys!
Please help me! I am about to update my XPERIA M (4.3 stock rom) to Lollipop 5.1.1, but I made a mistake in the first step.
When you install a rom you have to enable the USB debugging. I enabled it, but didn't confirm.
This means I don't have the USB debugging enable.
I successfully flashed the boot.img with fastboot, but when I'm about wipe data / factory reset, or anything else it shows a lot of error like: unable to mount /data (cause i didn't enable the usb debugging).
Tried to flash stock FTF with Flashtool, but didn't work (some kind of loader.sin error).
So I have right now a XPERIA M with cyanogen recovery, within I can't do anything, and can't flash stock ROM.
PLEASE HELP ME!
Click to expand...
Click to collapse
May be the ftf file is corrupted. Download again & try.
try to flash cm12.1 with cwm recovery - http://forum.xda-developers.com/showthread.php?t=2494793