I just want to root my D838HK and may be i use a wrong img? not sure ( i use the LG G3 V20x_Root with TWRP recovery)
Now my phone stuck on [780] fastboot mode started.......brababa and cannot turn on
Also, cannot go into download mode for KDZ update
and cannot go to 3rd party recovery by pressing vol- + power *2...after pressing hard rest , it still show [780] fastboot mode started.
Then I try fastboot method, but it only show wait for the device and not going on, I go to device manager to see driver problem or not, it has only CMCC Composite ADB Interface driver installed.
WHats should I do now?
FInally problem fixed, I found the fastboot can use suddently and I fastboot aboot / boot / recovery & laf.img extracted from D858HK20d.kdz
and it reboot as normal now...
jc917 said:
FInally problem fixed, I found the fastboot can use suddently and I fastboot aboot / boot / recovery & laf.img extracted from D858HK20d.kdz
and it reboot as normal now...
Click to expand...
Click to collapse
Can you please explain step by step how you did it? I am a complete newbie and i have the same problem you had
thank you very much in advance
Related
Hi Everyone
Sorry for my not so good English.
I have problem with my G3 and maybe someone can help? I instal root without problem, than I try to install Twrp recovery and after that I have that message ( [780] fast boot mode started) all the time, I try to do hard reset, click yes twice, but getting the same message, Is there any chance to unbrick that device when I can't go even to download mode?
Thank You very much for any suggestions
help!
help my G3 died the same thing happened!
same to me...
What model(s)? Youll need a pc, adb/fastboot, stock laf.img and boot.img for your device. Youll use adb commands to erase these img files and restore them with the new ones. Once you have adb running and recognizing your device with both files in same folder as adb you'll type adb erase laf [Enter] then adb flash laf laf.img [Enter] do the same steps for the boot.img. Next type adb reboot [Enter] you'll still be in fastboot but just pull the battery. Then replace battery and you should be able to enter download mode by inserting the usb and pressing vol +(i believe, it's been a while) and then kdz flash..
lg g3. maybe you have link ? how to do this..
Thanks.
nerija.nest said:
lg g3. maybe you have link ? how to do this..
Thanks.
Click to expand...
Click to collapse
I know its an lg g3 but what model. I dont have a link to these files and don't feel like searching youll have to search the forum.. Also I just told you how to do this..
D855 16gb , This is what needs to be missed for several days in search of forum. Will be a beautiful day..
nerija.nest said:
D855 16gb , This is what needs to be missed for several days in search of forum. Will be a beautiful day..
Click to expand...
Click to collapse
Ok well I'll meet you in the middle. Heres the link to the d855 partion files http://forum.xda-developers.com/showthread.php?t=2766437. I believe you'll need the second link in the ops first post. As far as adb.. If you dont know how to use it or get the files, Google should be able to help you.
Swizzle82 said:
Ok well Ill meet you in the middle. Heres the link to the d855 partion files http://forum.xda-developers.com/showthread.php?t=2766437. I believe youll need the second link in the ops first post. As far as adb.. If you dont know how to use it or get the files, Google should
be able to help you.
Click to expand...
Click to collapse
Did he drag the .img to the command prompt in order for it work. So its flash laf (the file that is dragged) next do the same thing with boot.img ( flash boot (drag boot file)) and the recovery.img
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
Its suppose to boot up the phone with no problem
i have one problem, not can write files FAILED (remote: flash write failure fastboot unlock , bet I not can write and erase... failure...
download mode problem
I couldn't fix this problem.
[520] Fastboot mode started
[610]--reset--
[610]--portchange--
[730] fastboot: processing commads
can't go to download.I tried adb erase laf adb erase boot I guess I couldn't do.help
if not done contact fb tungkick777 i can help all every body free
fastboot mode started
plz
tungkick said:
if not done contact fb tungkick777 i can help all every body free
Click to expand...
Click to collapse
I have the same problem.. i have d852.. please help!!
i have the same problems after the new upgrade to lollipo 20E vodafone Italy..
Same here
Edit: Solved
1) Took battery and USB Cable off
2) Pressed Volume Up
3) Took battery back while pressing volume up
4) Inserted USB Cable while pressing volume up
5) Phone started Download Mode
6) installed kdz through LG Flash Tools
Right now typing from my LG G3
Great!!!
Thank you very mucho Fusquinha77!!!
I cant get it, I use every way(erase boot,system,recovery, use advence power menu ext..)
But i cant go to download mode
Sent from my Smartfren Andromax AD6B1H using XDA Free mobile app
Fusquinha77 said:
Same here
Edit: Solved
1) Took battery and USB Cable off
2) Pressed Volume Up
3) Took battery back while pressing volume up
4) Inserted USB Cable while pressing volume up
5) Phone started Download Mode
6) installed kdz through LG Flash Tools
Right now typing from my LG G3
Click to expand...
Click to collapse
I can see a different screen for a split of a second but it's going back to Fastboot mode...
@SaharLevi
Here's the fix Quick and easy
need to have fastboot, I used ubuntu can install with sudo apt-get install android-tools-fastboot
info on fastboot
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer
also need recovery.img, I used the lastest twrp
In terminal
fastboot boot recovery.img
this will boot your phone with the img on your computer.
in recovery restore or install a good boot or kernel.
your phone should be good to go after that.
I had my phone fixed in about 5 min, I really should not play around with boot partition.
Also should be able to flash boot if you have a good one,
fastboot flash boot boot.img
Hi all,
After I've installed color os 2.1.1 from sniper-joe I cannot back into my recovery.
The phone can boot on OS and in fastboot but not into recovery.
My phone still boot loop as long I press volume down. When I release the button I'm in fastboot.
Model x9006
I try to remove SD and SIM : same
I've installed different TWMP and CWM : same
I've got some issue with 2.1.1 and want to go back to 2.0.8 but cannot
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
droidiam said:
Mine has too after installing the official Lollipop, any help? Lollipop was buggy for me so I'd like to unbrick my Oppo.
So plug in phone AFTER booting into Fastboot mode (power+volume up) then open a command window by pushing shift and right clicking anywhere that the platform-tools folder is and then type fastboot devices and hit enter and then type fastboot oem unlock and hit enter and then fastboot flash recovery recovery.img or whatever the name of your rcovery is then just power+volume down and boot into the recovery. It helped me!
Click to expand...
Click to collapse
You need one of these recoveries if you own a R63419 LCD (newer find 7 have this model) - For me the first was OK :
forum.xda-developers.com
/find-7/find7-development/x9076-r63419-lcd-recoveries-t3049886
Hi,
Since the rom ( http://forum.xda-developers.com/lg-g3/development/rom-resurrection-remix-lp-v5-5-5-t3198675 ) of my phone crashed. After reboot, the phone is blocked on LG logo. Now, i can't enter in recovery mode (or in the download mode) and when I start my phone, it's fixed on the LG for 5 to 10 minutes, and after that it goes to a terminal (started fastboot mode).
I have read several tutorials to use fastboot to flash the recovery to reinstall a rom, but i have a error when i tried to erase or flash the recovery partition.
I look on my phone, and this error appear : "failed to send erase grp start address".
what can i do to fix this error ?
Thanks.
up please
Use the "boot" command instead of "flash" and it should boot up into recovery or downloadmode, depending on which file you use
I tried but i am stucked on teamwin logo.
Which file do i use for download mode ?
Hard to tell, there are some laf.img files floating around on xda and google or even better, extract the laf.img from the stock kdz depending on your android version (for instance you flashed 6.0 you pick the 30b kdz and extract it with the firmware extraction tool)
I would suggest you to and try to use the boot command with them..
Be carefull, do not use the flash command until you found one that boots into downloadmode properly or you can loose your fastboot mode aswell
From then on you should be able to boot into the downloadmode and flash a new firmware via the lg flashtool
I need help please. What can i do to re install a rom ?
Does your PC recognise the port.?
I found tutorial under bender_007 signature. People seemed happy with tool.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Doesn't hurt to read and ask some questions.
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
th0was said:
no i can't connect my phone with port. I think, i nned to correct the error with fastboot. (remote : failed to erase partition)
Click to expand...
Click to collapse
Can you elaborate, how exactly your phone crashed, it is very unlikely that it will mess all the partitions just by crashing the rom?
The rom crushed twice, and now i can not access to recovery to install a new rom. I only have access to the fastboot command. Adb not working.
I tried to boot on recovery.img, but it's not working.
Thank for your help.
Regards,
Help please ?
Today i can connected to my phone with ADB when i tape this fastboot command : fastboot boot ./recovery.img.
I can too go into my phone as root with adb command : adb shell.
i tried to push flash_image on my phone and use it, but it donesn't work.
how can i flash my phone with adb command ?
Please help me to delete this post. i find a guide in my language. thank
Dear fellows,
please help me this case.
My zf2 550ml is in android 5.0.
i tried to flash MMbootloader <https://forum.xda-developers.com/showpost.php?p=68806518&postcount=117> to up 6.0 rom. After that, i lost the recovery, cannot access by hold power and Vol +.
Turn off the phone and on again, there is no boot screen or logo. The phone can still boot to android and work normally and still see my phone in adb devices.
Thank.
demonntl said:
Please help me to delete this post. i find a guide in my language. thank
Dear fellows,
please help me this case.
My zf2 550ml is in android 5.0.
i tried to flash MMbootloader <https://forum.xda-developers.com/showpost.php?p=68806518&postcount=117> to up 6.0 rom. After that, i lost the recovery, cannot access by hold power and Vol +.
Turn off the phone and on again, there is no boot screen or logo. The phone can still boot to android and work normally and still see my phone in adb devices.
Thank.
Click to expand...
Click to collapse
what every firmware you are currently on.. extract firmware zip file and copy ifwi, recovery, boot, droidboot, splashscreen images and paste those images in adb fastboot toll folder
now in adb fastboot tool folder move your cursor to and empty place hold shift and right click. find option open command windows here. now run following commands
fastboot devices ( to see if device recognized)
fastboot flash splashscreen splashscreen.img
fastboot flash ifwi ifwifilename
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash fastboot droidboot.img
fastboot reboot bootloader
now use volume button to find recovery mode option. click power button to enter recovery. you will enter recovery
( note: if you see an error screen with android logo. at that screen click and hold power button and then click volume plus and release power button you will enter recovery)
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Dude, you just should flashing original/stock boot.img and recovery.img. And your phone already fixed.
Jus flash vbmeta and than flash twrp again . It will work fine and you won't get erro
Flash vbmeta
where did you got the file?
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
orl4nd said:
where did you got the file?
Click to expand...
Click to collapse
I found one in the pixel rom thread, it worked fine for me when i had this issue flashing candy rom
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
You have to flash the boot.img via adb to boot into Fastboot or Recovery.
Stuck at same problem.
I am also facing same problem. I can't open fastboot and the phone reboots to stock recovery after some time. Please help.
same problem for me
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
reza14 said:
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
Click to expand...
Click to collapse
I will keep trying the different flashing tools. Also let me know if you are succesful.
RMX1901CH unbirick
RMX1901CH
I was in the same state but unbirick.
When the power is off Press the volume minus and the power simultaneously.
If you are in fastboot mode
1.adb flashing command // fastboot flash recovery twrp-3.3.1-24- RMX1901-mauronofrio.img
2. after starting TWRP - connected with otg usb memory (StockROM.ozip)
3. USBOTG to mount
4.wipe dalvik / ARTCache & cache & system & data
* 5. INSTALL StockROM
* RMX1901_11_OTA_0190_all_fSt4F56aQlqf.ozip (China) A19
I haven't tried with older versions
The international version will show an inappropriate error, and it may be possible with the same language model
* 6. reboot
Japanese who cannot speak English
I did this way
Is this problem Solve? i face the same problem. what can i do?
Hatzey said:
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Click to expand...
Click to collapse
Please help me.
same issue , can't do anything
the only way I found is , to know this user and pass in this tool so that I could test the firmware and post this here
Такая же проблема, помогите!!!
Long press volume down and power button , the phone will boot into fastboot mode. Flash vbmeta with disable verity command . It worked for me. No need do anything else.
volume down and power button for 10 sec
then flash stock recovery
then wipe data from stock rocovery
then back to bootloader and flash twrp recovery
then transfer stock rom zip on device
install it
done
Man i have the same problem, did you find any solution?
I already downloaded the qualcomm flash image loader, the pc detects the phone only when i press volume + and volume - and connect it, so i know i can do something, im gonna try with the EDL mode, any advance i'll let you know
how to do Flash vbmeta with disable verity command ???