Develop Bugs

[Q] no service after root, trying to get my regular phone bacl

I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE

Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk

ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??

Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue

Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.

ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help

dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.

ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?

dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II

rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.

ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?

ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)

ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,

[Partially solved][Q] GT-N7100 download mode problem

Hello,
It's been a while since I last stepped foot in the xda forums as I've been happy with stock, however when kies pushed the 4.3 update to my Note 2 I've started having problems - my phone will not sleep. After 2 min timeout the display turns off and immediately turns itself on again. It then goes into a loop where it turns off and on again every second until I unlock it. This is playing havoc with my battery life (I only get about 6 hours from full charge now). I've tried disabling any setting that might cause this (like smart stay etc.), I downloaded wakelockdetector (doesn't detect anything), I've tested my sensors and sleep mode with #*0*# (sleep mode has the same problem here), and I've done multiple factory/hard resets (x5).
I want to go back to 4.1.2 because this problem only started happening with 4.3 except now I have a different problem - I can't get download mode to work so I can't flash any recovery/firmware. I get the download mode screen up via the usual 3-key method, however once I'm there it seems to disable my volume keys because they stop working. I can get into recovery mode without any problems and the volume keys work fine there, but once it loads up the download mode screen and prompts me to press vol up to start or vol down to cancel, no matter what I press nothing happens. I have to hold down the power key to reboot.
Does anyone have any idea why my Note 2 is so broken?
Would really appreciate some expert help here. Thanks in advance.
Other stuff I've tried: I've tried with and without my SDcard. I've tried formatting my SDcard. I've tried taking my battery out for 5 mins and then go straight to download mode, but still my vol keys won't work.
I got kies to do a firmware reinitialisation which downloaded 4.3 again and flashed my phone a second time but still the problem persists.

I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour and a half away from me. I think this will be the last Samsung product I buy.

H2D2 said:
I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour away from me. I think this will be the last Samsung product I buy.
Click to expand...
Click to collapse
Install cwm recovery and then stock rom
1.boot into recovery
2.wipe/data factory reset
3.wipe cache partition
4.go to advance and wipe dalvik cache
5.choose install zip from sd card
6.place the stock rom zip file
Sent from my Micromax A74 using XDA Free mobile app

ankitetah said:
Install cwm recovery
Click to expand...
Click to collapse
How?
Forgive me if I'm wrong, but with 4.3 comes with knox and a locked bootloader. I can't load philz or twrp zip from recovery because it errors with an unsigned message and since I can't access download mode I can't use odin.

Shut down your phone. pull the battery out. connect your tether cable to the phone and USB to computer. start oden, put tar file in PDA box. don't change any other settings. Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode, click on Start on oden. As for the bloatware, you are going to get whatever apps that are in the tar file. I think Some of the bloat has been removed. Not sure what, but it seems most of it is still there. I think DriveSmart is gone
Sent from my Micromax A74 using XDA Free mobile app

ankitetah said:
Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode
Click to expand...
Click to collapse
These don't appear to be the correct instructions for a N7100. Well, thanks for the bump anyway.

Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)

I have same problem
i just flash new bootloader kitkat
"Bootloader If you have MJ5 or later bootloader then no need otherwise you have to apply Reboot and wifi Fix from post #3 above
You can get idea about current bootloader with info application
If You are not worried about warranty then I strongly recommend to flash Kitkat bootloader.
Here is Kitkat bootloader from N7100_ND3 "
and now my phone was on and it will stuck on samsung logo...
i m also not able to install stock rom
help me to downgrade 4.1 old bootloader.

keltakmaster said:
Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)
Click to expand...
Click to collapse
Thank you!
Mobile odin worked. Got the pro version to thank Chainfire. Also managed to get root thanks to Kingo and I'll be donating to them as well.
Unfortunately even after flashing CM10 it hasn't fixed my sleep problem. Well, maybe I've got a hardware fault after all...funny that it coincided with the 4.3 update. I guess I've voided my warranty now but on the bright side I've finally ditched Samsung's bloatware and stock android. Here's hoping I can find a fix.

[q] [bricked]t700!!!! Help!!!

hi everyone i bought a chinese version of t700 and rooted with odin everything went well. Later I decided to flash it with the western stock rom
T700XXU1ANF7_T700XAR1ANF5_XAR with odin and got a failed message after hidden.img
now I'm stuck in a continuos loop of "firmware upgrade encountered an issue....." and since the battery is not removable I cant even shut it down. I Attempted to enter the download mode holding the 3 bottons but it results in a loop to "firmware upgrade encounter an issue..." message. So I can't even get into the download mode.
Please help!!

kaede15 said:
hi everyone i bought a chinese version of t700 and rooted with odin everything went well. Later I decided to flash it with the western stock rom
T700XXU1ANF7_T700XAR1ANF5_XAR with odin and got a failed message after hidden.img
now I'm stuck in a continuos loop of "firmware upgrade encountered an issue....." and since the battery is not removable I cant even shut it down. I Attempted to enter the download mode holding the 3 bottons but it results in a loop to "firmware upgrade encounter an issue..." message. So I can't even get into the download mode.
Please help!!
Click to expand...
Click to collapse
Sounds like you softbricked it. Here's how to fix that (note the tablet MUST BE plugged into a PC to fix this) :
mitchellvii said:
If you have flashed a rom and your tablet "soft bricks", i.e. it gets stuck at the Samsung splash screen or boot loops Recovery there is an easy way to recover without having to reflash the original firmware in ODIN (assuming you were smart and made a NANDROID backup before flashing your rom).
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery and restoring your NANDROID backup. So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your NANDROID backup.
Disaster averted.
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473/post54618555
I would recommend redownloading a stock ROM and flashing that using Odin. Good luck!

Stock roms are country specific. If you bought the device in China, you to have to install the Chinese version or else you will always be in a bricked loop state.

NixxonExxo said:
Stock roms are country specific. If you bought the device in China, you to have to install the Chinese version or else you will always be in a bricked loop state.
Click to expand...
Click to collapse
Any idea where to find USA specific stock firmware? I've looked on Samsungupdate.com and sammobile.com with no luck.

Everytime it's the same:
people are experimenting with their expensive tablet/phone without knowing what the consequences are!
And then, when the experiment fails, they don't know what todo and other people may come with solutions!
Get first some more info before "playing" with your expensive gadget!

cubsrule17 said:
Any idea where to find USA specific stock firmware? I've looked on Samsungupdate.com and sammobile.com with no luck.
Click to expand...
Click to collapse
This thread will help... forum.xda-developers.com/showthread.php?t=2798835

henklbr said:
Everytime it's the same:
people are experimenting with their expensive tablet/phone without knowing what the consequences are!
And then, when the experiment fails, they don't know what todo and other people may come with solutions!
Get first some more info before "playing" with your expensive gadget!
Click to expand...
Click to collapse
Good point. I'm a flashaholic with my phone but intended to leave my T805 unrooted. However, I couldn't accept the SD card limitations and not being able to choose which apps to have on my tablet. It should be my choice not Samsung's and this might be causing people to try rooting without the necessary knowledge. Rant over.

4braid said:
Good point. I'm a flashaholic with my phone but intended to leave my T805 unrooted. However, I couldn't accept the SD card limitations and not being able to choose which apps to have on my tablet. It should be my choice not Samsung's and this might be causing people to try rooting without the necessary knowledge. Rant over.
Click to expand...
Click to collapse
Samsung is nothing to blame in this: Google is!

[Q] Samsung Galaxy tab S "Not for sale" version with "retail mode" app, problem!

[Q] Samsung Galaxy tab S "Not for sale" version with "retail mode" app, problem!
this may seem strange, but I have a Samsung galaxy tab S, demo version, with a "NOT FOR SALE" text hacked on the back, it has a "retail mode" app on it (even after factory reset) so I can't remove it, is it possible to install a (stock) ROM on this tablet?

I would imagine installing a stock firmware with odin should do the trick

same here, i flashed with stock firmware and it works no more ldu

Thanks for your response,
the devise's model is " SAMSUNG SM-T800X " and i can't find a thread on xda for a ROM for this version!

flash with t800 rom dude .

is this (ThunderRom800 ) ok? I want a easy to install ROM.

SelfAwareDroid said:
is this (ThunderRom800 ) ok? I want a easy to install ROM.
Click to expand...
Click to collapse
yes but u need a custom recovery : http://forum.xda-developers.com/gal...recovery-twrp-2-7-1-0-touch-recovery-t2817100 then u can flash custom rom

everything ok for now, sorry!

I rooted the device (with Odin), then installed the latest TWRP successfully, then went to boot menu and noticed TWRP's touch interface in scrambled (where i tap the screen isn't where it get clicked on screen, it was kindda on random places) and it filled half the screen, so for a long time I tried to tap randomly on screen and finally I could wipe the first 4 check-boxes, then i guess the battery charge went out, so after successfully wiping the device it got shut down.
now I can't go to TWRP boot menu, but I can go to other boot menu (home button + vol up + power ) , and i can't turn the damn thing off! so what should i do?

SelfAwareDroid said:
I rooted the device (with Odin), then installed the latest TWRP successfully, then went to boot menu and noticed TWRP's touch interface in scrambled (where i tap the screen isn't where it get clicked on screen, it was kindda on random places) and it filled half the screen, so for a long time I tried to tap randomly on screen and finally I could wipe the first 4 check-boxes, then i guess the battery charge went out, so after successfully wiping the device it got shut down.
now I can't go to TWRP boot menu, but I can go to other boot menu (home button + vol up + power ) , and i can't turn the damn thing off! so what should i do?
Click to expand...
Click to collapse
use openrecovery-twrp-2.7.1.1-chagallwifi

Thank you very much for your help, it did work.

SelfAwareDroid said:
Thank you very much for your help, it did work.
Click to expand...
Click to collapse
you' re welcome.
cheers

My guess this should work for the tab s 8.4 as well? Root and install a custom rom?

NJ_RAMS_FAN said:
My guess this should work for the tab s 8.4 as well? Root and install a custom rom?
Click to expand...
Click to collapse
Should but make sure your battery is at at least 80% before starting......battery dying while flashing is not good and can lead to bricked device.

pinsb said:
Should but make sure your battery is at at least 80% before starting......battery dying while flashing is not good and can lead to bricked device.
Click to expand...
Click to collapse
yup, that I know. I done many flashes before. All my devices (except wife s4) are rooted. She doesn't want me touching her phone. ha.. anyways.. this is the first time I come across retail demo item.

update.. Rooted the Tab S 8.4 and install TWRP. used custom rom and no more retail mode.. So happy.. For the price I paid, it was a steal.. lol...

Note 4 LDU
I saw this thread and I was wondering if I could flash a stock Note 4 firmware to my LDU Note 4.

RedZobe said:
I saw this thread and I was wondering if I could flash a stock Note 4 firmware to my LDU Note 4.
Click to expand...
Click to collapse
as long as its the stock rom for that particular model, i don't see why not..

NJ_RAMS_FAN said:
as long as its the stock rom for that particular model, i don't see why not..
Click to expand...
Click to collapse
What stock rom should I use?

hey
pls help .
I rooted the device with Odin, then installed TWRP manager successfully from GOOGLE PLaY and installed Thunder Rom V3 from SDcard in recovery mode and now device show new firmware ( KOT49H. ThunderRom800V3) and new device name (SM-T800 before SM-T800X) but I still have the Retail Mode .
What I've done wrong?

Odin fails to flash

Hello, just picked up a used tab s t705w bell in good shape. Ive tried to flash the original 5.02 as well as autroot and another original image as well. All of them fail. Im using the latest version of Odin. The connection says its ok as per com port than when it gets to boot.img it stops and fails. Ive tried 2 USB cables as well as all my USB ports to no avail. Please help as to what I'm doing wrong, thanks.

Heres a pic

Update: tried with laptop still same thing, is there anybody that can offer a suggestion? I even unplugged the battery and plugged back in. I also tried several older versions of Odin.

Well since nobody knows what to do my research indicates possibly nand chip has failed meaning hardware issue. Gonna look at returning it.

cesandoid said:
Well since nobody knows what to do my research indicates possibly nand chip has failed meaning hardware issue. Gonna look at returning it.
Click to expand...
Click to collapse
Hi,
Did you end up fixing the issue? I think I have the same issue as yours on a SM T800. It came with 4.4.2 so when I tried to update to Marshmellow it failed and it restarted fine, and it told me to update via my pc using Kies or smarth switch. So I did so and guess what happened Smart Switch failed as well but now it bricked the tablet. So when Smart switch tries to install the recovery, same thing. So I now have a brick! So I am trying to find out if there was a solution or not. If not I will just have to wear it.
Thanks.

hello, identical problem ,ODIN does not complete the procedure,Tablet locked in the emergency screen.... no key combination works........
any ideas?
TEX

tex_kit said:
hello, identical problem ,ODIN does not complete the procedure,Tablet locked in the emergency screen.... no key combination works........
any ideas?
TEX
Click to expand...
Click to collapse
You're saying you can't get it back into the Odin download mode?
Hold HOME+ VOLUME UP+VOLUME DOWN+POWER. (Keep holding)
When the Samsung splash screen comes up, let go of the VOLUME UP button.
When the Odin warning screen comes up, let go of all buttons and click VOLUME UP.
Even when I was sure mine was soft-bricked, I was able to get it into Odin download.

wellersl said:
You're saying you can't get it back into the Odin download mode?
Hold HOME+ VOLUME UP+VOLUME DOWN+POWER. (Keep holding)
When the Samsung splash screen comes up, let go of the VOLUME UP button.
When the Odin warning screen comes up, let go of all buttons and click VOLUME UP.
Even when I was sure mine was soft-bricked, I was able to get it into Odin download.
Click to expand...
Click to collapse
thanks ,executed the procedure and finally I’m back in the Odin screen.Unfortunately the error has recurred ........ the end of the procedure shall be interrupted .....
[/IMG]
end of the test.
More info:last update to Android 6...enter in Odin Mode . I manage to start the installation but towards the end of lock , tried both with FIR. OMN-T805XXU1ANFB-2014,(European generic), both with OMN-T805XXU1CPL1_T805OMN1CPK1-20161212(dedicated version

tex_kit said:
thanks ,executed the procedure and finally I’m back in the Odin screen.Unfortunately the error has recurred ........ the end of the procedure shall be interrupted .....
[/IMG]
end of the test.
More info:last update to Android 6...enter in Odin Mode . I manage to start the installation but towards the end of lock , tried both with FIR. OMN-T805XXU1ANFB-2014,(European generic), both with OMN-T805XXU1CPL1_T805OMN1CPK1-20161212(dedicated version
Click to expand...
Click to collapse
In my limited experience with Odin, I find it to be a very stable, robust, and reliable application. Having said that, and not knowing what version you're using, the usual suggestions are:
Try another (older) version of Odin.
Try another USB cable.
Always use a USB 2 port.
Try a different firmware package making *certain* it's for your model tab. (<- This is what's most suspect - IMHO.)
As long as you can still invoke the Odin downloader on your tab, there's still hope.

Good morning, Sir
News update, detailed search carried out, found the latest specific Samsung Firmware, (XEH-T805XXU1CPL1-20170111202424 with MM.)
The procedure with Odin has been successfully completed. (end of good news) At the end of the operation the tablet remains with the logo samsung bright intermittently . performed hard reset but remains stuck on the initial logo samsung always bright intermittently.
Suggestions?
TEX

tex_kit said:
Good morning, Sir
News update, detailed search carried out, found the latest specific Samsung Firmware, (XEH-T805XXU1CPL1-20170111202424 with MM.)
The procedure with Odin has been successfully completed. (end of good news) At the end of the operation the tablet remains with the logo samsung bright intermittently . performed hard reset but remains stuck on the initial logo samsung always bright intermittently.
Suggestions?
TEX
Click to expand...
Click to collapse
PM SENT.
Yup. Been there. Done exactly that. I fixed it by subscribing to SamMobile, then paying for and downloading the OEM firmware. That's probably the best news, You can always get back to a box-stock condition. If you have the patience, you can download the firmware for free.
EDIT: Once I got back to stock, I looked for and found:
DAMMIT! I keep forgetting we have two different tabs. Obviously Klimtwifi is wrong for you.
lineage-14.1-20200321-UNOFFICIAL-klimtwifi, installed it with Odin3_v3.11.2 (Not sure it matters.)
Then rooted it using Odin: https://android.gadgethacks.com/how-to/android-basics-root-with-cf-auto-root-0167401/
And, once rooted, installed the Official TWRP app from Google Play. I always use the next older version of TWRP (twrp-3.3.0-0-klimtwifi) because TWRP doesn't like me much.
Then, rebooted into recovery and flashed GApps (open_gapps-arm-9.0-nano-20200417)
FWIW - This is from feeble memory, and I still have all the files - both those that worked and those that didn't - all in the same folder. So if something doesn't work for you, I've got what worked for me.
All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.

All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.???
IS A build guide available ??
The Samsung Galaxy Tab S 10.5 LTE is no longer maintained.
I just thought I’d switch to android 4.4 ....
The problem comes from the loss of boot files?
TEX

tex_kit said:
All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.???
IS A build guide available ??
The Samsung Galaxy Tab S 10.5 LTE is no longer maintained.
I just thought I’d switch to android 4.4 ....
The problem comes from the loss of boot files?
TEX
Click to expand...
Click to collapse
This should get you where you want to be: http://www.lineageosdownloads.com/download-galaxy-tab-s-10-5-lte-lineage-os/
I'm not sure what caused the problem in the first place. I was just very relieved to see it boot when i got the stock ROM back on it.
Did you restore yours back to stock? It's good practice.

wellersl said:
This should get you where you want to be: http://www.lineageosdownloads.com/download-galaxy-tab-s-10-5-lte-lineage-os/
I'm not sure what caused the problem in the first place. I was just very relieved to see it boot when i got the stock ROM back on it.
Did you restore yours back to stock? It's good practice.
Click to expand...
Click to collapse
Good morning,
The tablet is Hungarian (made search via samsung and s n), I install unique files (extension .md5).
installed the version K.K. 4 , the only novelty the presence during the first restart of the colored logo, performed manual restart and hard reset /wipe ,
At the end it remains with the Samsung logo bright intermittently (Samsung logo power etc.etc.). Found the multifile firwarware.
Odin does not recognize extension . enc4 and (oddly ) I find nothing to extract Files...
TEX

tex_kit said:
Good morning,
The tablet is Hungarian (made search via samsung and s n), I install unique files (extension .md5).
installed the version K.K. 4 , the only novelty the presence during the first restart of the colored logo, performed manual restart and hard reset /wipe ,
At the end it remains with the Samsung logo bright intermittently (Samsung logo power etc.etc.). Found the multifile firwarware.
Odin does not recognize extension . enc4 and (oddly ) I find nothing to extract Files...
TEX
Click to expand...
Click to collapse
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.

wellersl said:
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.
Click to expand...
Click to collapse
Good morning,
Downloaded and installed the latest version SM-T805_t805xxu1cpl1_marshmallow(Android 6.0.1)_Xeh_factory Rom (4 File)_20170111.zip.enc4. (decrypted with an earlier version of samfirm (3.9 ).
the installation procedure of the 4 files, AP, BL, CP, CSC, does not involve problems.
Unfortunately at the end of the procedure the Tablet does not restart automatically, and after its hard wipe reset remains locked on the initial logo samsung always bright intermittently.
During the tests I noticed that holding down the power button tries to start. The second samsung logo stands out completely but does not pass the stage.
The feeling he can’t make it.
A new PIT file?
Tex

wellersl said:
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.
Click to expand...
Click to collapse
Good morning, first of all
I want to thank you for your patience and time.
Performed yet another installation test with Odin this time with Android 5 (XEH-T805XXU1BOJ1-20151111094815) similar result, you have precedents.
But with a novelty
.At the end of the installation, the tablet remains off, as in the pretending tests, I try to start it normally but nothing, in addition to the ever-present Logo (Samsung Galaxy tab S) flashing intermittently.
I press the power button for several seconds with the result of making the second samsung logo appear (colored) with an Android loading start, release the button, the device turns off.
By re-activating the flashing logo (Samsung Galaxy tab S) normally.
Holding down the power button starts
Android update - optimization of the accompanying application (192 tot), a few minutes later always with the power pressed, the process ends and the installation of applications begins, after a few seconds, the first APP starts., the tablet turns off.
By turning it on again and the intermittent luminous logo (Samsung Galaxy tab S) reappears.
Repeating the procedure (power button pressed continuously) you get colored samsung logo and the writing (alkalmazàsok telepitèese) installation of applications and turns off.
I perform a wipe data / factory reset obtaining:
--wiping data—
Formatting / data ...
Formatting / cache ...
Formatting / sbfs ....
E: unknow volume for path [/ sbfs]
E: unknow volume "/ sbfs"
Complete data wipes.
I run reboot system now.
The tablet turns on with the intermittently lit Logo (Samsung Galaxy tab S).
By repeating the whole procedure previously described, no changes are obtained.
TEX

alkalmazàsok telepitèese?
Neither Google nor I understand that phrase. Do you?
Irrespective of that, I'm at my wit's end. And, assuming you're following the published directions, you may be looking at a hardware failure.
Just to confirm, before all this started for you, this was a working tablet?

wellersl said:
Neither Google nor I understand that phrase. Do you?
Irrespective of that, I'm at my wit's end. And, assuming you're following the published directions, you may be looking at a hardware failure.
Just to confirm, before all this started for you, this was a working tablet?
Click to expand...
Click to collapse
good morning,
the tablet was working, during a game session started to reboot, always and only with the logo (Samsung Galaxy tab S) bright intermittently, performed hard reset, I did not fix anything. The only news, these days, after Odin, is the complete installation of android 5 with the power key pressed all the time.releasing the tablet key turns off . At the next power on I get the logo (Samsung Galaxy tab S) bright intermittently.
thank you for your patience and professionalism
Tex

This is the screen you see *before* you invoke Odin and connect the tab to your PC?
View attachment 5009263