Related
Hello,
It's been a while since I last stepped foot in the xda forums as I've been happy with stock, however when kies pushed the 4.3 update to my Note 2 I've started having problems - my phone will not sleep. After 2 min timeout the display turns off and immediately turns itself on again. It then goes into a loop where it turns off and on again every second until I unlock it. This is playing havoc with my battery life (I only get about 6 hours from full charge now). I've tried disabling any setting that might cause this (like smart stay etc.), I downloaded wakelockdetector (doesn't detect anything), I've tested my sensors and sleep mode with #*0*# (sleep mode has the same problem here), and I've done multiple factory/hard resets (x5).
I want to go back to 4.1.2 because this problem only started happening with 4.3 except now I have a different problem - I can't get download mode to work so I can't flash any recovery/firmware. I get the download mode screen up via the usual 3-key method, however once I'm there it seems to disable my volume keys because they stop working. I can get into recovery mode without any problems and the volume keys work fine there, but once it loads up the download mode screen and prompts me to press vol up to start or vol down to cancel, no matter what I press nothing happens. I have to hold down the power key to reboot.
Does anyone have any idea why my Note 2 is so broken?
Would really appreciate some expert help here. Thanks in advance.
Other stuff I've tried: I've tried with and without my SDcard. I've tried formatting my SDcard. I've tried taking my battery out for 5 mins and then go straight to download mode, but still my vol keys won't work.
I got kies to do a firmware reinitialisation which downloaded 4.3 again and flashed my phone a second time but still the problem persists.
I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour and a half away from me. I think this will be the last Samsung product I buy.
H2D2 said:
I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour away from me. I think this will be the last Samsung product I buy.
Click to expand...
Click to collapse
Install cwm recovery and then stock rom
1.boot into recovery
2.wipe/data factory reset
3.wipe cache partition
4.go to advance and wipe dalvik cache
5.choose install zip from sd card
6.place the stock rom zip file
Sent from my Micromax A74 using XDA Free mobile app
ankitetah said:
Install cwm recovery
Click to expand...
Click to collapse
How?
Forgive me if I'm wrong, but with 4.3 comes with knox and a locked bootloader. I can't load philz or twrp zip from recovery because it errors with an unsigned message and since I can't access download mode I can't use odin.
Shut down your phone. pull the battery out. connect your tether cable to the phone and USB to computer. start oden, put tar file in PDA box. don't change any other settings. Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode, click on Start on oden. As for the bloatware, you are going to get whatever apps that are in the tar file. I think Some of the bloat has been removed. Not sure what, but it seems most of it is still there. I think DriveSmart is gone
Sent from my Micromax A74 using XDA Free mobile app
ankitetah said:
Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode
Click to expand...
Click to collapse
These don't appear to be the correct instructions for a N7100. Well, thanks for the bump anyway.
Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)
I have same problem
i just flash new bootloader kitkat
"Bootloader If you have MJ5 or later bootloader then no need otherwise you have to apply Reboot and wifi Fix from post #3 above
You can get idea about current bootloader with info application
If You are not worried about warranty then I strongly recommend to flash Kitkat bootloader.
Here is Kitkat bootloader from N7100_ND3 "
and now my phone was on and it will stuck on samsung logo...
i m also not able to install stock rom
help me to downgrade 4.1 old bootloader.
keltakmaster said:
Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)
Click to expand...
Click to collapse
Thank you!
Mobile odin worked. Got the pro version to thank Chainfire. Also managed to get root thanks to Kingo and I'll be donating to them as well.
Unfortunately even after flashing CM10 it hasn't fixed my sleep problem. Well, maybe I've got a hardware fault after all...funny that it coincided with the 4.3 update. I guess I've voided my warranty now but on the bright side I've finally ditched Samsung's bloatware and stock android. Here's hoping I can find a fix.
I just got a Tab S 8.4 used on ebay.
I like the tab but lots of apps I use are not lollipop compatible even when side loaded.
I want to revert this Tab S 8.4 from lollipop to the stock samsung kitkat. (32gb Titanium, USA,. wifi only version)
I just found this link with instructions:
http://samsung-firmware.org/download/Galaxy Tab S 8.4 (WiFi)/5432/XAR/T700XXU1ANL2/T700XAR1ANL2/
Can I just download that and follow the instructions to get back to kitkat without any issue or tripping knox?
thanks.
Use this link: https://mega.nz/#!AYsCFaiY!aOJs57p3EV0HYzDYUxkE0QTgfW2ztCTzUYhtBKhhTZM
That is my own personal upload to Mega. It will probably be a faster download and I know it's safe.
Steps:
1. Place tablet in download mode (Turn tablet off, press and hold POWER, HOME, and VOLUME DOWN until you come to a warning screen. Click VOLUME UP to continue to download mode.)
2. Download zip file
3. Extract the file
4. Open Odin
5. Select AP
6. Select the file you just extracted
7. Click start
I've used these steps without issue. As far as KNOX is concerned, it is my understanding that flashing a custom ROM is what trips it and not stock firmware. I could be wrong on the KNOX issues.
thanks! it is a slow download.... yours is much quicker.
Any particular version of Odin to download? (3.10.6 work? or Samsung Odin 3.09?)
so installing this OVER the lollipop stock firmware I have...very little chance of bricking following the instructions if all goes well right?
I'm not new to flashing just want to make sure as I have heard someone say a samsung rep said you can't downgrade
Thanks very much!
I'm surprised at what you say, I haven't had a single issue with any app being incompatible with lollipop.
These must be pretty outdated apps.
3 of note:
simply note: you can't access it's menu system. (yes it is old, but it works the way I like just fine in kitkat)
xfinity tv go: no audio, freezes, crashes
Both Go Launcher HD & EX do weird things...unuseable.
The latest versions can't be setup the way I prefer and had on previous tablet or phone running kitkat.
all 3 run perfect in kitkat
Now granted all but the xfinity are old, but they work/config the way I want them to be.
I'd rather just have it the way I want then compromise if it all possible.
pdx1138 said:
thanks! it is a slow download.... yours is much quicker.
Any particular version of Odin to download? (3.10.6 work? or Samsung Odin 3.09?)
so installing this OVER the lollipop stock firmware I have...very little chance of bricking following the instructions if all goes well right?
I'm not new to flashing just want to make sure as I have heard someone say a samsung rep said you can't downgrade
Thanks very much!
Click to expand...
Click to collapse
Version 3.10.6 is the version I use so you should be fine there. I have the same model as you, but mine is 16GB instead of 32. I seriously doubt that would make any difference. Yes, flashing over Lollipop is what I did. Ran into no issues whatsoever!
ok I did that and now it just boots to the samsung logo then holds there.
Tried turning off, won't do it.
held down vol power and home and it goes back into download mode.
I tried to flash again it does it successfully and reboots (just like first time) and it just freezes at samsung boot logo.
before that comes up it does show the green droid for a moment.
any ideas?
pdx1138 said:
ok I did that and now it just boots to the samsung logo then holds there.
Tried turning off, won't do it.
held down vol power and home and it goes back into download mode.
I tried to flash again it does it successfully and reboots (just like first time) and it just freezes at samsung boot logo.
before that comes up it does show the green droid for a moment.
any ideas?
Click to expand...
Click to collapse
Boot into recovery mode and restore factory defaults. That should get you through the Samsung logo. Turn device off, hold POWER + VOLUME UP + HOME, select factory reset
ok i'm in setup now (like a new device)
thanks!
damn that made me sweat for a minute.
Thanks for the quick response
pdx1138 said:
ok i'm in setup now (like a new device)
thanks!
damn that made me sweat for a minute.
Thanks for the quick response
Click to expand...
Click to collapse
Yea, I was freaking out when I first did that. I figured at that point it wouldn't hurt to give everything else a try. Enjoy your KitKat! I noticed that the colors seems to be more vivid with KitKat than Lollipop as well. That's one reason I went back.
Hi...can i have the link again?
TQ.
I've seen already this thread suggested by XDA thread locator.
https://forum.xda-developers.com/htc-one-m8/help/verizon-htc-one-m8-stuck-htc-logo-t3163088
But I'd try to explain as simple as possible the whole situation which happened hours ago.
Don't know what happened but my mothers phone went off and restarted with htc one logo on it and nothing else later.
Power button itself doesnt work and is not responding.
Configuration PWR + VOL UP gives me restart but no recovery mode, giving me sound effect of restarting phone and ONE logo on it without any other reaction whatsoever.
PWR + VOL DWN zero reaction
PWR + VOL UP & DOWN pressed together restarting the phone and then gives me HTC ONE LOGO and nothing else.
when Phone is plugged in to the computer and I'm forcing the phone to restart it shows me new Device on the computer as a CD Driver every time.
So I think there is still hope to get this guy back to life.
It's running on custom rom but unknown version because it was purchased as a refurb from ebay 2 years ago and it was running just fine utill this very day.
I'm absolutely noob with flashing twrping etc so please ELI5 if possible, any type of help will be much appreciated.
Thanks in advance.
Hey, I had this same problem a couple of days ago. Here's what I did to get the phone into fastboot, from where you can install a recovery, factory reset etc.
1. Hold the power button + vol up button for about 10-20 seconds. This should shut down the phone.
2. Hold the power button + vol down button to restart the phone back into fastboot.
If you can get into fastboot, there are plenty of guides which can help you flash a twrp image. If you want me to give you some instructions on that just reply and let me know. Good luck!
Note that this phone doesn't have download mode (as some other Android devices do); nor is there a button combo to go directly to recovery. But you can almost certainly still get to bootloader, and from there boot recovery. In the current condition, you can get to bootloader by:
1) Hold Power+ vol up (as you have been) to restart the phone.
2) Once the screen goes dark (signaling it is about to reboot) let go of the buttons, and only hold vol down
3) Don't let go of vol down until the bootloader screen appears.
4) If the above sequence fails, its virtually always because the user just didn't get the timing right (either started pressing vol down too late, or let go too early). Just repeat steps 1-3 until you get to bootloader.
Once in bootloader, try to reflash the ROM, or restore a TWRP backup (if you have one). Spontaneously stuck on HTC logo screen is often a result of the OS/ROM becoming corrupt or otherwise damaged, and flashing/restoring the ROM will often fix it.
Thanks @redpoint73 I've managed to get to the preinstalled recovery.
Sadly reflashing/factory reset failed few times due corrupted files.
I'm ok with the fact that I lost the data on the phone since most of it was stored on the cloud.
Now I need ROM to flash on the phone thru recovery but I don't know which one would you reccomend.
It's my mom's phone so basically reliabilty and robustness over flashing lights and numerous unnecessary functions.
Version of android doesn't really matter.
Thanks again for help so far.
Can I put the rom I'm about to flash on external SD Card or I have to transfer it thru computer to the phone?
TWRP might be extra helpful or the recovery it's functions are just fine?
Shewie said:
Thanks @redpoint73 I've managed to get to the preinstalled recovery.
Sadly reflashing/factory reset failed few times due corrupted files.
I'm ok with the fact that I lost the data on the phone since most of it was stored on the cloud.
Now I need ROM to flash on the phone thru recovery but I don't know which one would you reccomend.
Click to expand...
Click to collapse
I'd need to know more about the phone in order to give any suggestions.
With the phone connected to computer, boot into fastboot mode, and (assuming you have fastboot setup on your computer) do the command: fastboot getvar all
Then post the results (delete IMEI and serial number before posting).
Also, what version TWRP (if that is the recovery installed)?
Shewie said:
Can I put the rom I'm about to flash on external SD Card or I have to transfer it thru computer to the phone?
Click to expand...
Click to collapse
You will be able to flash a ROM from the SD card, if using TWRP.
Shewie said:
TWRP might be extra helpful or the recovery it's functions are just fine?
Click to expand...
Click to collapse
Not sure what is being asked here (can't quite understand). Are you saying that another recovery besides TWRP is presently installed?
@redpoint73 I don't have TWRP but this...
Maybe pictures will justify the real situation.
I don't have the fastboot preinstalled on computer. (yet)
I wouldn't mind link to the pack with "must have" to complete the process
Shewie said:
@redpoint73 I don't have TWRP but this...
Maybe pictures will justify the real situation.
I don't have the fastboot preinstalled on computer. (yet)
Click to expand...
Click to collapse
You have what is called the "stock recovery" or official HTC recovery.
You can't flash anything but OTA updates, or other official (HTC) signed zips with this. You need a "custom" recovery like TWRP in order to flash things like custom ROMs. So I'm curious what you meant before when you posted:
Shewie said:
Thanks [MENTION=660462]Sadly reflashing/factory reset failed few times due corrupted files.
Click to expand...
Click to collapse
What exactly were you trying to "reflash", what were the exact steps, and the results (specific error messages, etc.).
I did the factory reset but it didn't help still stucking at ONE logo like posted initially. So this is basically the situation right now. I was able to get to recovery but nothing else.
Shewie said:
I did the factory reset but it didn't help still stucking at ONE logo like posted initially. So this is basically the situation right now. I was able to get to recovery but nothing else.
Click to expand...
Click to collapse
Okay, so you're confusing the terms. Factory reset doesn't flash/reflash anything (flash meaning to install some firmware or software to the device). The only thing that factory reset does is wipe user data.
At this point, I'd suggest the best/easiest course of action in the current conditions (stock recovery, locked bootloader) would be to run the RUU intended for your device. Your device is the AT&T version, so the RUU can be found at the bottom of the page (and instructions on how to install): http://www.htc.com/us/support/htc-one-m8-att/news/
RUU is a complete factory image. You download to a PC (PC required, won't work on Mac or Linux) connect the phone (booted into bootloader-fastboot mode) then just run the RUU, and it will do the rest.
I'm confidant this will get the phone up and running. Your mom may not like all the AT&T branding and apps, if it wasn't there before, and AT&T is not her carrier (one of the main reasons for these devices to have custom ROM - to remove carrier branding). But we can cross that bridge (if need be), after we get the phone working.
Installed Software, downloaded RUU from website provided, turned phone into fastboot before installing RUU.
Something started happening with the phone during installation but installation itself cant be finished, it's an endless process of update, phone is already plugged 3rd hour or so to the computer but the update status remain the same.
Should I try different approach?
Shewie said:
Installed Software, downloaded RUU from website provided, turned phone into fastboot before installing RUU.
Something started happening with the phone during installation but installation itself cant be finished, it's an endless process of update, phone is already plugged 3rd hour or so to the computer but the update status remain the same.
Should I try different approach?
Click to expand...
Click to collapse
It just gets stuck sometimes. Just kill the process, and start the RUU again. It will probably work fine on the next try. It's a bit scary, as it says not to stop the process or disconnect the phone while it's running. But if it gets stuck like this, there isn't anything else you can do.
Good News, it's working. But it's bloated to the bones. How I can get rid of the carrier unnecessary software?
I was to afraid to kill the process during update to avoid scenario of bricking my phone completely.
But It's working!
Hello, just picked up a used tab s t705w bell in good shape. Ive tried to flash the original 5.02 as well as autroot and another original image as well. All of them fail. Im using the latest version of Odin. The connection says its ok as per com port than when it gets to boot.img it stops and fails. Ive tried 2 USB cables as well as all my USB ports to no avail. Please help as to what I'm doing wrong, thanks.
Heres a pic
Update: tried with laptop still same thing, is there anybody that can offer a suggestion? I even unplugged the battery and plugged back in. I also tried several older versions of Odin.
Well since nobody knows what to do my research indicates possibly nand chip has failed meaning hardware issue. Gonna look at returning it.
cesandoid said:
Well since nobody knows what to do my research indicates possibly nand chip has failed meaning hardware issue. Gonna look at returning it.
Click to expand...
Click to collapse
Hi,
Did you end up fixing the issue? I think I have the same issue as yours on a SM T800. It came with 4.4.2 so when I tried to update to Marshmellow it failed and it restarted fine, and it told me to update via my pc using Kies or smarth switch. So I did so and guess what happened Smart Switch failed as well but now it bricked the tablet. So when Smart switch tries to install the recovery, same thing. So I now have a brick! So I am trying to find out if there was a solution or not. If not I will just have to wear it.
Thanks.
hello, identical problem ,ODIN does not complete the procedure,Tablet locked in the emergency screen.... no key combination works........
any ideas?
TEX
tex_kit said:
hello, identical problem ,ODIN does not complete the procedure,Tablet locked in the emergency screen.... no key combination works........
any ideas?
TEX
Click to expand...
Click to collapse
You're saying you can't get it back into the Odin download mode?
Hold HOME+ VOLUME UP+VOLUME DOWN+POWER. (Keep holding)
When the Samsung splash screen comes up, let go of the VOLUME UP button.
When the Odin warning screen comes up, let go of all buttons and click VOLUME UP.
Even when I was sure mine was soft-bricked, I was able to get it into Odin download.
wellersl said:
You're saying you can't get it back into the Odin download mode?
Hold HOME+ VOLUME UP+VOLUME DOWN+POWER. (Keep holding)
When the Samsung splash screen comes up, let go of the VOLUME UP button.
When the Odin warning screen comes up, let go of all buttons and click VOLUME UP.
Even when I was sure mine was soft-bricked, I was able to get it into Odin download.
Click to expand...
Click to collapse
thanks ,executed the procedure and finally I’m back in the Odin screen.Unfortunately the error has recurred ........ the end of the procedure shall be interrupted .....
[/IMG]
end of the test.
More info:last update to Android 6...enter in Odin Mode . I manage to start the installation but towards the end of lock , tried both with FIR. OMN-T805XXU1ANFB-2014,(European generic), both with OMN-T805XXU1CPL1_T805OMN1CPK1-20161212(dedicated version
tex_kit said:
thanks ,executed the procedure and finally I’m back in the Odin screen.Unfortunately the error has recurred ........ the end of the procedure shall be interrupted .....
[/IMG]
end of the test.
More info:last update to Android 6...enter in Odin Mode . I manage to start the installation but towards the end of lock , tried both with FIR. OMN-T805XXU1ANFB-2014,(European generic), both with OMN-T805XXU1CPL1_T805OMN1CPK1-20161212(dedicated version
Click to expand...
Click to collapse
In my limited experience with Odin, I find it to be a very stable, robust, and reliable application. Having said that, and not knowing what version you're using, the usual suggestions are:
Try another (older) version of Odin.
Try another USB cable.
Always use a USB 2 port.
Try a different firmware package making *certain* it's for your model tab. (<- This is what's most suspect - IMHO.)
As long as you can still invoke the Odin downloader on your tab, there's still hope.
Good morning, Sir
News update, detailed search carried out, found the latest specific Samsung Firmware, (XEH-T805XXU1CPL1-20170111202424 with MM.)
The procedure with Odin has been successfully completed. (end of good news) At the end of the operation the tablet remains with the logo samsung bright intermittently . performed hard reset but remains stuck on the initial logo samsung always bright intermittently.
Suggestions?
TEX
tex_kit said:
Good morning, Sir
News update, detailed search carried out, found the latest specific Samsung Firmware, (XEH-T805XXU1CPL1-20170111202424 with MM.)
The procedure with Odin has been successfully completed. (end of good news) At the end of the operation the tablet remains with the logo samsung bright intermittently . performed hard reset but remains stuck on the initial logo samsung always bright intermittently.
Suggestions?
TEX
Click to expand...
Click to collapse
PM SENT.
Yup. Been there. Done exactly that. I fixed it by subscribing to SamMobile, then paying for and downloading the OEM firmware. That's probably the best news, You can always get back to a box-stock condition. If you have the patience, you can download the firmware for free.
EDIT: Once I got back to stock, I looked for and found:
DAMMIT! I keep forgetting we have two different tabs. Obviously Klimtwifi is wrong for you.
lineage-14.1-20200321-UNOFFICIAL-klimtwifi, installed it with Odin3_v3.11.2 (Not sure it matters.)
Then rooted it using Odin: https://android.gadgethacks.com/how-to/android-basics-root-with-cf-auto-root-0167401/
And, once rooted, installed the Official TWRP app from Google Play. I always use the next older version of TWRP (twrp-3.3.0-0-klimtwifi) because TWRP doesn't like me much.
Then, rebooted into recovery and flashed GApps (open_gapps-arm-9.0-nano-20200417)
FWIW - This is from feeble memory, and I still have all the files - both those that worked and those that didn't - all in the same folder. So if something doesn't work for you, I've got what worked for me.
All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.
All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.???
IS A build guide available ??
The Samsung Galaxy Tab S 10.5 LTE is no longer maintained.
I just thought I’d switch to android 4.4 ....
The problem comes from the loss of boot files?
TEX
tex_kit said:
All said, getting LineageOS on this thing was far, far simpler that trying to get it back to stock.???
IS A build guide available ??
The Samsung Galaxy Tab S 10.5 LTE is no longer maintained.
I just thought I’d switch to android 4.4 ....
The problem comes from the loss of boot files?
TEX
Click to expand...
Click to collapse
This should get you where you want to be: http://www.lineageosdownloads.com/download-galaxy-tab-s-10-5-lte-lineage-os/
I'm not sure what caused the problem in the first place. I was just very relieved to see it boot when i got the stock ROM back on it.
Did you restore yours back to stock? It's good practice.
wellersl said:
This should get you where you want to be: http://www.lineageosdownloads.com/download-galaxy-tab-s-10-5-lte-lineage-os/
I'm not sure what caused the problem in the first place. I was just very relieved to see it boot when i got the stock ROM back on it.
Did you restore yours back to stock? It's good practice.
Click to expand...
Click to collapse
Good morning,
The tablet is Hungarian (made search via samsung and s n), I install unique files (extension .md5).
installed the version K.K. 4 , the only novelty the presence during the first restart of the colored logo, performed manual restart and hard reset /wipe ,
At the end it remains with the Samsung logo bright intermittently (Samsung logo power etc.etc.). Found the multifile firwarware.
Odin does not recognize extension . enc4 and (oddly ) I find nothing to extract Files...
TEX
tex_kit said:
Good morning,
The tablet is Hungarian (made search via samsung and s n), I install unique files (extension .md5).
installed the version K.K. 4 , the only novelty the presence during the first restart of the colored logo, performed manual restart and hard reset /wipe ,
At the end it remains with the Samsung logo bright intermittently (Samsung logo power etc.etc.). Found the multifile firwarware.
Odin does not recognize extension . enc4 and (oddly ) I find nothing to extract Files...
TEX
Click to expand...
Click to collapse
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.
wellersl said:
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.
Click to expand...
Click to collapse
Good morning,
Downloaded and installed the latest version SM-T805_t805xxu1cpl1_marshmallow(Android 6.0.1)_Xeh_factory Rom (4 File)_20170111.zip.enc4. (decrypted with an earlier version of samfirm (3.9 ).
the installation procedure of the 4 files, AP, BL, CP, CSC, does not involve problems.
Unfortunately at the end of the procedure the Tablet does not restart automatically, and after its hard wipe reset remains locked on the initial logo samsung always bright intermittently.
During the tests I noticed that holding down the power button tries to start. The second samsung logo stands out completely but does not pass the stage.
The feeling he can’t make it.
A new PIT file?
Tex
wellersl said:
Did you find your model number on the SamMobile website? That's really where you need to start. Once you have the correct OEM firmware, using Odin to install it is a no-brainer. You need to get back to stock before you can move on to custom.
What is your complete model number?
Send me a private message. I think I may be confused and am causing you extra confusion.
Click to expand...
Click to collapse
Good morning, first of all
I want to thank you for your patience and time.
Performed yet another installation test with Odin this time with Android 5 (XEH-T805XXU1BOJ1-20151111094815) similar result, you have precedents.
But with a novelty
.At the end of the installation, the tablet remains off, as in the pretending tests, I try to start it normally but nothing, in addition to the ever-present Logo (Samsung Galaxy tab S) flashing intermittently.
I press the power button for several seconds with the result of making the second samsung logo appear (colored) with an Android loading start, release the button, the device turns off.
By re-activating the flashing logo (Samsung Galaxy tab S) normally.
Holding down the power button starts
Android update - optimization of the accompanying application (192 tot), a few minutes later always with the power pressed, the process ends and the installation of applications begins, after a few seconds, the first APP starts., the tablet turns off.
By turning it on again and the intermittent luminous logo (Samsung Galaxy tab S) reappears.
Repeating the procedure (power button pressed continuously) you get colored samsung logo and the writing (alkalmazàsok telepitèese) installation of applications and turns off.
I perform a wipe data / factory reset obtaining:
--wiping data—
Formatting / data ...
Formatting / cache ...
Formatting / sbfs ....
E: unknow volume for path [/ sbfs]
E: unknow volume "/ sbfs"
Complete data wipes.
I run reboot system now.
The tablet turns on with the intermittently lit Logo (Samsung Galaxy tab S).
By repeating the whole procedure previously described, no changes are obtained.
TEX
alkalmazàsok telepitèese?
Neither Google nor I understand that phrase. Do you?
Irrespective of that, I'm at my wit's end. And, assuming you're following the published directions, you may be looking at a hardware failure.
Just to confirm, before all this started for you, this was a working tablet?
wellersl said:
Neither Google nor I understand that phrase. Do you?
Irrespective of that, I'm at my wit's end. And, assuming you're following the published directions, you may be looking at a hardware failure.
Just to confirm, before all this started for you, this was a working tablet?
Click to expand...
Click to collapse
good morning,
the tablet was working, during a game session started to reboot, always and only with the logo (Samsung Galaxy tab S) bright intermittently, performed hard reset, I did not fix anything. The only news, these days, after Odin, is the complete installation of android 5 with the power key pressed all the time.releasing the tablet key turns off . At the next power on I get the logo (Samsung Galaxy tab S) bright intermittently.
thank you for your patience and professionalism
Tex
This is the screen you see *before* you invoke Odin and connect the tab to your PC?
View attachment 5009263
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
What exactly were you trying to do? I mean normally you hook up old phone and use smart switch to update new phone. So why was you connected to a PC? It does sound like you bricked it.
So now you probably need to flash the ROM.
I read that smart switch is a good and valid source to check for updates. I never thought that an official Samsung software can be so bad at something so basic, resulting in bricking my phone...
Stop using smart switch to update your phone. You haven't hard bricked it because you still have recovery. It's called a soft brick. Download Odin 13.3_3B from here on xda. Do not use the 13.4 because it's suspected to have a fishy call back to a server from a dll that's in the program folder. Download the atch firmware for your model from sammobile or get it in this s20 ultra forum. You should be able to flash the new firmware.
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Julius_GER said:
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Click to expand...
Click to collapse
Odin uses official firmware from Samsung so no warranty voided.
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
What kind of USB Port did you use?
Try again using a USB 2.0 port, Samsung always had problems with it's software and USB 3.0 ports.
Use USB 2.0 and try again.
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
klantee said:
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
Click to expand...
Click to collapse
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Geekser said:
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Click to expand...
Click to collapse
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
klantee said:
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
Click to expand...
Click to collapse
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
Hey Julius, did you get your phone to work. I am having the same issue.
Update:
I am good now. I was using the thunderbolt cable that came with the phone and update would get stuck at the same point everything with odin 3.13 and 3.14.
I used a USB 3 to thunderbolt cable that I had from an older phone and it work.
What I used:
Windows 10 x64 1909
USB 3 to thunderbolt cable
USB driver downloaded from Samsung support. I think it is the same driver that comes with smart switch because when I installed it, it prompted
to reinstall driver.
Odin3 v3.13.3_3B_PatcheD from here https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. ( I think 3.14 will work too.
I really think the cable was the only problem)
Firmware downloaded with SamFirm
klantee said:
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Click to expand...
Click to collapse
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
ASHLEY117 said:
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
Click to expand...
Click to collapse
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
klantee said:
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
Click to expand...
Click to collapse
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
ASHLEY117 said:
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
Click to expand...
Click to collapse
Tried your suggestion with no joy. Will keep trying though as I feel this issue can be cracked. Many thanks...
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
klantee said:
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
Click to expand...
Click to collapse
Glad I could hel;p- I know how frustrating it is when things seem like you can never get things to work - anyway - best of luck - and be sure to hit thanks If I helped you.
Hi Do you lose your data (vids and pics) via this method? i have had same thing happen on my s20+