rom removed! Moving to aospa-l
PATCHES / BASEBANDS
D805/6 Baseband:
This baseband is a version modified from d802 LP, it makes possible to boot on these variants & enable all the 4g bands, that they support.
You can found on my website.
Low Mic FIX:
Here, install it after installing rom. Next build will come with it.
Changelog:
Device Source Changes:
Code:
[B]Device 1.0 Slim Changes:[/B]
-Initial version
-Allow lower brightness for manual and auto mode
-Disable 4k recording (not working as it should)
-Bump
-Disable LCD hack (now, is flashing kernel as stock cm)
Strix Kernel Changes:
Code:
[B]Strix 1.0 Kernel Features:[/B]
-Fastcharge 3.1 (Thx: @Dorimanx)
-No LCD detection hack
-3.4.108 sublevel
-CRC Disable
First here...roms coming fast and thick...thank you for more options
@daniel.stuart14
Judging by the fact the bootstacks are based on your git and not Dr Gravy's or rasheds, you put the bootstacks together yeah? Didn't fork them?
Lawlrus said:
@daniel.stuart14
Judging by the fact the bootstacks are based on your git and not Dr Gravy's or rasheds, you put the bootstacks together yeah? Didn't fork them?
Click to expand...
Click to collapse
Forked, my site just redirects.
I edited all, to work with assert
Here it's
daniel.stuart14 said:
Forked, my site just redirects.
Here it's
Click to expand...
Click to collapse
Well if you used rasheds, you might want to test your download mode as people have reported it being broken.
If you forked them from dr gravy you should be fine, but honestly I'd suggest linking to the official gits as opposed to redirecting them to one of yours.
Will stop possible drama, and if they do update the bootstacks because of something else that might be wrong with them, then its dumbed down, you won't need to keep making sure they're up to date.
Lawlrus said:
Well if you used rasheds, you might want to test your download mode as people have reported it being broken.
If you forked them from dr gravy you should be fine, but honestly I'd suggest linking to the official gits as opposed to redirecting them to one of yours.
Will stop possible drama, and if they do update the bootstacks because of something else that might be wrong with them, then its dumbed down, you won't need to keep making sure they're up to date.
Click to expand...
Click to collapse
All the variants are from Dr Gravy, except d802 (newer aboot) and f320 (I add the bump option). I can't redirect to dr gravy, because his version doesn't has assert. All my bootstacks zip have.
Hey @daniel.stuart14 sorry for the noob question but i always had this doubt, I have a D805, i know that to use the CAF version of the ROMs i need to use the D802 LP bootstacks and a D805 modem but in every CAF ROM i tried i got soft reboots and noticed that is related with modem (3G or 4G) or GPS, and now I'm really confused because of the LP bootstacks update. How should I install the bootstacks in order to be able to install and run your ROM in my D805? (Just asking this here cause you are Brazilian and should have the same device as me). Thanks for the great work
igoorsoouza said:
Hey @daniel.stuart14 sorry for the noob question but i always had this doubt, I have a D805, i know that to use the CAF version of the ROMs i need to use the D802 LP bootstacks and a D805 modem but in every CAF ROM i tried i got soft reboots and noticed that is related with modem (3G or 4G) or GPS, and now I'm really confused because of the LP bootstacks update. How should I install the bootstacks in order to be able to install and run your ROM in my D805? (Just asking this here cause you are Brazilian and should have the same device as me). Thanks for the great work
Click to expand...
Click to collapse
Hey mate!
Here with hybrid bootstacks + my edited baseband (see 2# post), is working flawless.
Just install the bootstacks from my site, and then, the d805 modem.
Give a try, if you still getting issues, just tell me. :highfive:
D802 loops at LG logo. Not booting at all. Obrigado pelo seu trabalho!
dnsp said:
D802 loops at LG logo. Not booting at all. Obrigado pelo seu trabalho!
Click to expand...
Click to collapse
Did you flash my hybrid bootstacks? They are modded to work with my kernel & stock LP.
Yes.
bootlooping here as well on D802.
dnsp said:
Yes.
Click to expand...
Click to collapse
shinaipt99 said:
bootlooping here as well on D802.
Click to expand...
Click to collapse
Guys, can you try this?
I think I found the problem, the new way of flashing kernel was not working as well it should on G2. Fixed in next build.
Still no avail. The LG logo shows up for about 6 seconds following a brief blank screen then it restarts.
dnsp said:
Still no avail. The LG logo shows up for about 6 seconds following a brief blank screen then it restarts.
Click to expand...
Click to collapse
Hmmm, my only guess is the baseband. (This is the only thing diferent between mine and yours).
Try this. and say to me if works. I'll update the bootstacks then.
It's ok now, booted just fine.
dnsp said:
It's ok now, booted just fine.
Click to expand...
Click to collapse
Thank you, I'll update bootstacks modem. (I think I put the d805 version in it, just a mistake )
Mines just got a bootloop too using my the bootstacks+ D805 modem but I couldn't reboot to recovery in the comum way, but I got it thanks to the g2 community in g+ and reflash the older bootstacks from rashed and it worked as before.. Very Strange, can you double check if its really working for D805?
Related
Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.
LiquidSmooth & Euphoria-OSAll builds are unofficial
GEE users flashing my non-GPROJ ROMs, flash one of the GEE kernels below in the downloads section, after flashing the ROM.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Code:
ABOUT THE ROMS
LIQUIDSMOOTH
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Click to expand...
Click to collapse
Code:
SOURCE CODE
GPROJ BASED
ROM: https://github.com/LiquidSmooth
KERNEL: https://github.com/CyanogenMod/lge-kernel-gproj
DEVICE: https://github.com/CyanogenMod/android_device_lge_ls970
VENDOR: https://github.com/TheMuppets/proprietary_vendor_lge
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_gproj-common
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_ls970-common
Click to expand...
Click to collapse
Code:
DOWNLOADS
LIQUIDSMOOTH ROM
LiquidSmooth - Android 5.0.2 - 02/04/15 - AndroidFileHost
LiquidSmooth - Android 5.0.2 - 03/17/15 - AndroidFileHost (GPROJ)
LIQUIDSMOOTH V4.0 (Android 5.0.*)
LiquidSmooth 01/18/15 - AndroidFileHost (GPROJ)
LiquidSmooth 01/29/15 - AndroidFileHost (GPROJ)
EUPHORIA-OS ROM
Euphoria-OS - Android 5.1.1 - 06/10/15 - AndroidFileHost
EUPHORIA-OS ROM V1.1 (Android 5.1.*)
Euphoria-OS 05/18/15 - AndroidFileHost (GPROJ)
GAPPS
Nano Modular Pachage - Android 5.1.*
KERNELS
Here are some other kernels for Gee and Geeb. If you get flashing colors try the other kernel of the same name.
I didn't make these kernels, I found them on other threads for this device. Threads are listed below.
GEE-MAKO
KERNELS - Android 5.1.*
Solid Kernel V1.82
Franco r217.5
Hells-Core b75-L
KERNELS - Android 5.0.*
Solid Kernel V1.61
Jolla AIO Gen2-v2.5 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
Franco r216
Hells-Core b69
Hells-Doctor FrAndroid 0224
Hells-Doctor Numeriks 0403
Mirage 020515
KERNELS - Android 4.4.*
Solid Kernel V1.5
AK-CM 360
AK-AOSP 360 (Works with this build)
Franco r212
Franco-MOD r212 (Works with this build)
Matr1x V14.2
Matr1x-MOD V14.2(Works with this build)
Jolla AIO Gen2-v1.2 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
GPROJ
KERNELS - Android 5.1.*
Solid Kernel V1.8.2 (GEE)
Jolla AIO Gen3-v1.2 (GEE)
KERNELS - Android 5.0.*
Solid Kernel V1.61 (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.5 (GEE)
STOCK
KERNELS - Android 5.0.*
AK 600 (GEE)
Matr1x (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.82 (GEE)
RECOVERY
TWRP 2.8.6.0
FIXES
SuperSU
Click to expand...
Click to collapse
INSTALLATION
Wipe Data, System, Cache, Dalvik Cache
Flash LiquidSmooth ROM
Flash GApps
Reboot
UPDATING
Nand Backup Using Recovery
Erase Previous Backup (Saves Space)
Flash LiquidSmooth ROM Update
Wipe: Cache, Dalvik
Reboot
Click to expand...
Click to collapse
Code:
THREADS MENTIONED
Gapps 5.0.*
SuperSU
Jolla Kernel
Solid Kernel
Matr1x Kernel
Franco Kernel
TWRP recovery
ViPER4Android Audio Effects
XDA:DevDB Information
LiquidSmooth, ROM for the Sprint LG Optimus G
Contributors
clementinox
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2015-01-26
Last Updated 2015-06-14
Reserved
Reserved
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
clementinox said:
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
Click to expand...
Click to collapse
So you haven't (let it) tested at all?
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
clementinox said:
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Click to expand...
Click to collapse
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
dopy25 said:
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
Click to expand...
Click to collapse
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
clementinox said:
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
Click to expand...
Click to collapse
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
dopy25 said:
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
Click to expand...
Click to collapse
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
shindou01 said:
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
Click to expand...
Click to collapse
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
dopy25 said:
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
Click to expand...
Click to collapse
I'm sorry dopy25, I thought that clementinox has uploaded another build since he already uploaded the new builds he had for geeb. I didn't realize it until the download was completed. The 01-18 build is the one I'm running. But I think he's prepared another build. The only issue I encountered with this build, aside from the mentioned wrong carrier name is that in the lock screen it would show (no sim - Sprint) at the top left corner. Although text and calls work, my data doesn't and I assume it has something to do with my phone not on Sprint (APNs etc).
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Kevinjoa said:
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Click to expand...
Click to collapse
You are absolutely right. After the update I grabbed from your server, I was able to install both Liquid roms as secondary. However, neither have the developer options available. Is there a different way to activate them in Liquid?
Also, @clementinox I have pretty much everything working in your ROM, but it caused my boot loader to freeze at the google loading screen. That was on reboot. It just sat there. So I had to go in recovery and wipe stuff again. So, to everyone else wanting to try this with gproj sources. It does indeed work.
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
FcoEnrique said:
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
Click to expand...
Click to collapse
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
clementinox said:
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
Click to expand...
Click to collapse
Whoohoo... I knew it... backing up data and preparing to clean flash another build by @clementinox .
LiquidSmooth V4.0 GPROJ ROM Updated!
Announcements
Flash and enjoy! If you like the ROM give a thumbs up!
Changelogs
LiquidSmooth Gerrit
LiquidSmooth Github
As Expected, downloaded and will try out your newest build.
Have you found the cause of the No Sim Card sign on the lockscreen or is it still there? Hopefully with this new update I can set the APN to my carrier's and get working data again! Thanks clementinox! :fingers-crossed:
I love the extra features against other ROMs (like cyanogem) but... I really miss themes, which was a "hell no!" when I found that it is not present in the ROM... And editable QS... So I'll in the meantime...
I Hope to see a build with all that in the future :good:
@Cloudyfa is back! UltraAlpha has been discontinued.
UltraAlpha testing releases
This is the thread for UltraAlpha testing releases - when the ROM is ready for primetime a separate thread will be created.
In short, this ROM is a continuation of CloudyG2 3.0 - for all variants!
Unfortunately, @Cloudyfa has been unresponsive for a while. The show must go on! Huge thanks to @Cloudyfa.
Requirements:-Must be coming from the respective lollipop stock base of your variant.
-TWRP 2.8.6.1 ONLY!
-SIM unlocking is not currently supported.
-Know the risks of flashing
Expect a new release (v1.0) soon!
Kernels are a huge problem on this ROM - expect NO RELEASES until
Dorimanx Lollipop is stable enough to use.
Code:
Credits:
[user=270378]@Cloudyfa[/user] for all of his wonderful work
Moder Boykinhdi for the signal patch
@dev>null for his variant patches - I was missing a few files and his fix had them
Code:
V0.1 - LINK REMOVED! DO NOT INSTALL! DO NOT INSTALL! DO NOT INSTALL! LINK REMOVED!
Code:
As usual, nobody on XDA is responsible for your phone, cat, thermonuclear testing facility, or anything else.
I'm here if help needed, LS980 on GSM outside USA
_____________________________________Read more write less and be smart
dmezh said:
This is the thread for UltraAlpha testing releases - when the ROM is ready for primetime a separate thread will be created.
In short, this ROM is a continuation of CloudyG2 3.0 - for all variants!
Unfortunately, @Cloudyfa has been unresponsive for a while. The show must go on! Huge thanks to @Cloudyfa.
Expect a release soon - but don't expect a 100% daily driver. Although this may happen soon, it won't be in this thread at all.
Testers are the foundation of this project - please test!
Expect a release some time this weekend.
Code:
As usual, nobody on XDA is responsible for your phone, cat, thermonuclear testing facility, or anything else.
Click to expand...
Click to collapse
I would love to test. Unlocked d800 in united states.
Oh yes .It must be very interesting.
Waiting
I will check it out tomorow again. If I don't forget it then I can give you all the partition files from the European D802 V30A KDZ
I would love to see Flex 2 or G4 features in this new ROM.
stimpy001 said:
I would love to see Flex 2 or G4 features in this new ROM.
Click to expand...
Click to collapse
Anything's possible!
wulsic said:
I will check it out tomorow again. If I don't forget it then I can give you all the partition files from the European D802 V30A KDZ
Click to expand...
Click to collapse
I would love those files!
It seems that the D802 situation is a bit complicated - I thought of using the European files for all D802s but there are bound to be problems and bricks.
I'm actually really confused on the D802 situation. How many different versions of Lollipop for D802 are there?
What I see myself doing with this whole situation is just adding the variants to the installer as I find more of them - so there will be an option for each version (European, Vodafone, etc.)
I would love to help test this! I have a D800 in the US running on AT&T.
FiendFyre said:
I would love to help test this! I have a D800 in the US running on AT&T.
Click to expand...
Click to collapse
Go ahead and test - the first release is up!
Proceed with caution!
Mission starting.... I'm on D800 unlocked as well downloading as I write
dmezh said:
Go ahead and test - the first release is up!
Proceed with caution!
Click to expand...
Click to collapse
Im on d800 what do you mean with caution
---------- Post added at 09:01 PM ---------- Previous post was at 08:57 PM ----------
What is the differences between your rom and stock lollipop
iamtha1 said:
Im on d800 what do you mean with caution
---------- Post added at 09:01 PM ---------- Previous post was at 08:57 PM ----------
What is the differences between your rom and stock lollipop
Click to expand...
Click to collapse
This is a G3 port. What I meant by "caution" is to be careful - this is not 100% stable.
Just a word of caution - please make sure you are all using the LATEST version of TWRP and are on STOCK LOLLIPOP before attempting to install.
Looking forward to some D800 test reports before I jump in
I get an lg security boot error and can't enter recovery. Any help on going back to stock? I've tried a few guides but nothing successful. Using a d800 model
Will be definitely testing when a D801 version comes out!
theinspector said:
I get an lg security boot error and can't enter recovery. Any help on going back to stock? I've tried a few guides but nothing successful. Using a d800 model
Click to expand...
Click to collapse
Try to go back to stock with LG flashtool. I've had the same error before.
No matter what you see, you CAN get into recovery. Try a stock tot/kdz first, and if that doesn't work (when I got the error flashtool would fail, but by running it as admin, making sure a USB 2 port is used, and leaving the device plugged in even if it fails that it worked):
-Power off the device fully.
-Hold Power+Vol down for 2 sec, let it go and hold it again until you see "Recovery Mode" (the LG logo doesn't need to be there when you let the buttons go and press them again)
-Do whatever you need to do from recovery.
TESTERS: Speak up! We need to know more. I hope this is not a ROM issue and that this is an isolated case.
Please, someone let us know how it went!
DO NOT USE AUTOREC ON LP UNDER ANY CIRCUMSTANCES!
There is already [Rom] [5.0.1] CloudyG2 3.0 Modify For D802 V1.1 in this link. Its from Dj_GraFlY.
https://docs.google.com/uc?id=0BxADHj0aSysFVG5hTHVMTmpxVFE&export=download
Installing the firmware:
- Skachayt firmware patch.
- Sdeat backup existing firmware
- Install patch D802_PATCH_GO_LP_droidth.zip
- Reboot again in Recovery (you can do it straight from the Recovery)
- Make WIPE (system \ data \ dalvik cache)
- Set himself ROM CloudyG2 3.0 Modify V1.1.zip For D802)
- Restart
- Finish
So I have to be in Official Lollipop 5.0.2 to install this ROM in TWRP 2.8.6.1?
I m using At&t G2 D800.
ROM : Cloudy G2 v2.2
Kernel : Dorminax 10.3
Hi.
This is United Oxygen team.
We are going to show Official BlissPop for Optimus G Pro with our jolla-kernel ported for G Pro.
This thread is going to be renewed soon.
!NOTICE!
This ROM contains jolla-kernel, which means this ROM supports MultiROM.
RIL is almost FIXED!
When we make a stable ROM, I will re-design our CM thread with PC.
But now, I would just write with mobile, dirty, like this.
And, we'd finally changed our host server, from Innoloud to AchonApp, due to Innoloud's lots of bugs.
What doesn't work:
- T-Money (Korea)
- MMS (Only for F240L - Test with Hangouts, please.)
- Maybe More? You tell me.
You should check:
- Camera (Including 3rd party Camera)
- Installation of Minecraft APK (One Korean said he cannot install it.)
- RIL if it is stable or not now.
ROM Download:
* Optimus G Pro (Korea/Intl)
http://lap.so/krpi
(Download 1021 version.)
(Please select right carrier version for F240. E980 users should download e980 named ROM.)
* Optimus GK
http://lap.so/btme
(Download 1021 version.)
What's Updated:
* 2015.11.11
- Second Release.
- OTA Added - you can download tweaks or kernel updates via OTA app.
- jolla-kernel 5.1 added.
@Genie's, please support Optimus Gx F310!. Thanks in advance.
Can I run any 5.1.1 gapps with this rom
DLM2583 said:
Can I run any 5.1.1 gapps with this rom
Click to expand...
Click to collapse
Yes, you can.
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
We are now tring to support E980.
Please download E980 version and test ROM and whether MultiROM is supported or not.
If you install this ROM in Primary Slot, please enter this adb command to know us what E980's kexec code is. :
adb shell
su
dmesg | grep -i hardboot
Hey there I ran the ROM all day today and battery drain is pretty bad and its coming from Google play services...... I'm using Google experience launche.... But i don't think its the Google now cards that are the problem any ideas
We can't solve the probelm associated with Google Play Services... I just recommend you to use Greenify to hibernate some Google Service.
Have been using & pretty good rom.thanks!
Can u only post the kernel so we can use this on any cm based roms and on every new builds.. Is it possible ?
@Genie's, brother, can you share the kernel separately? I love your ROMs, and want also to test other ROMs using OxyGen kernel. Best kernel for F240 so far!
Does it work with E980 yet I am confused by the original post and the one below it?
rjmxtech said:
Does it work with E980 yet I am confused by the original post and the one below it?
Click to expand...
Click to collapse
Oh, I'm sorry. I fixed my first thread. E980 is supported now.
Sent from my Galaxy S4 (SHV-E300S) using XDA Mobile App
DLM2583 said:
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
Click to expand...
Click to collapse
Go into settings >data> click 3 dot menu upper right side and you will found the mobile network on last tab. Hope its helpful.
Sent from my LG-F240L using XDA Free mobile app
Yeah thanks it toko me at least two days to figure this one out but thanks
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Genie's said:
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Click to expand...
Click to collapse
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Hamza1010 said:
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Click to expand...
Click to collapse
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Genie's said:
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Click to expand...
Click to collapse
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Hamza1010 said:
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Click to expand...
Click to collapse
I don't know well about E980 cuz I'm living in Korea.
Maybe...You should find them in OpGpro Threads.
Sorry.
Sent from my LG G3 using XDA Mobile app
Hello, everybody! Today, I'm bringing up here my hybrid bootstacks packages.
WARNING #1: Messing with boot partitions can be dangerous. Don't try it if you don't know what a BRICK means!
WARNING #2: You must flash a BUMP recovery before trying it, I recommend @blastagator one!
WARNING #3: It only supports BUMP kernels, so, checkout with your rom maintainer before flashing!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in these packages
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
Why use hybrid boostacks?
If you're on CM-12.1, CM-13.0 or even LP STOCK, you'll need flash a boostacks, but why use hybrid?
Hybrid bootstacks were made thinking on stability and being as closest as possible to stock.
All of them, use the most recent aboot/laf & modem compatible. Also, devices without official lollipop have here a workaround:
-D803 variant has its own package, that brings KK files, with a modified d801 lp baseband.
-L22 variant has its own package, that brings KK files, with a modified d802 lp baseband.
Also, if you are still not satisfied, I made a WIKI with many infos about bootstacks, that you can found on my github or the most important parts here:
Supported devices:
D800
D801
D802
D803 (KK + LP BASEBAND)
D805/6 (SAME PACKAGE FOR THESE TWO VARIANTS)
F320K/L/S (ONE PACKAGE FOR EACH VARIANT)
L22 (KK + LP BASEBAND)
LS980
VS980
What is bootstack?
It's a set of images, that are essential for your device. These hybrid bootstracks use all the images from lollipop, except aboot, which is from kitkat. So, we can have bump working with LP partitions.
What is in it? (Except D803 & L22)
-Aboot (KK)
-Dbi (LP)
-Laf (LP) (BUMP)
-Modem (LP)
-Persist (LP) (Except LS980)
-Rpm (LP)
-Sbl1 (LP)
-tz (LP)
Which roms it works?
CM-12.1, and any rom based on it. (Except RR with stock kernel. Workaround: Custom kernel.)
CM-13.0, and any rom based on it.
LP STOCK, and any rom based on it.
What is assert?
Assert is a command line in zip script, it checks if you're flashing a compatible bootstrap with your device.
Why it only supports bump?
Because I updated all the aboot files to KK, and only JB supports loki.
Why you updated aboot to KitKat?
Because KK bootloader is more reliable, and I can merge the original kernel cmdline.
I can't enter in recovery, why?
My aboot files are the most recent KK versions, some of them have a new way to enter in recovery:
-Old Way: Hold power + vol down, then, release and hold power + vol down again.
-New Way: Hold power + vol down, then, release and hold vol up + vol down.
How D803 and L22 are available, if they're stuck on KK?
-D803 is using D803 KK bootstacks, except by the modem, that is the same from D801, but, edited with D803 modem files.
-L22 is using L22 KK bootstacks, except by the baseband, which is the same from D802, but, edited with L22 radio files.
Why Laf isn't giving secure booting error, if we're using LP version?
-As everybody knows, until now, we were using KK Laf + KK Aboot. This was because new LP images have a new image signature. So, to make it boot on KK Aboot, I broke LP signature (Extracting the ramdisk and packing it again) and then I bumped it using open_bump.
More info about files: github.
DOWNLOADS:
D800 Hybrid Bootstacks
D801 Hybrid Bootstacks
D802 Hybrid Bootstacks
D803 Hybrid Bootstacks
D805/6 Hybrid Bootstacks
F320K Hybrid Bootstacks
F320L Hybrid Bootstacks
F320S Hybrid Bootstacks
L22 Hybrid Bootstacks
LS980 Hybrid Bootstacks
VS980 Hybrid Bootstacks
Thanks to:
- @Rashed97 , for all his work, and the original zip packages.
- @Drgravy , for the updated bump packages, that I use as base.
Issues & Requests:
If you found a bug, want request a variant support, or even found a newer boot(aboot/modem/laf/etc...) file, you can request it HERE.
If you want a quickly answer, I really recommend posting it there.
Attention! Devices stuck on JB will not be add! Ex: L-01F DOCOMO
ONLY FOR DEVS:
With my bootstacks (and others with KK aboot), roms can be more stock, than using old loki packages (With JB aboot).
With KK aboot, we can:
Delete LCD hack script, and use stock CM boot flash way. (KK Aboot sets LCD type, by itself) (NO MORE PERMANENT LCD DAMAGE!)
Use new tags_addr 0x00000100
Delete cmdline entries: msm_rtb.filter=0x0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_g2_lgd_cmd (Aboot auto-sets it.)
Revert this JB hack.
The good thing here, is that it'll not explode devices using old JB aboot, because these devices won't be able to boot these roms. (the new tags_addr makes JB bootloader stops until user restart it to recovery.)
Attention: DON'T DO ANY OF THESE MODIFICATIONS ON RECOVERY! RECOVERIES MUST BE UNIVERSAL!
reserved 2
Flashed on d802 Dirty Unicorns + Render R3. All working. Thanks
Great and usefull work. Thank you
Enviado desde mi LG-D802 mediante Tapatalk
I hope this solves problems with Render Kernel, thank you
Render Kernel finally booted.
Excellent work! :good:
only dirty flash the zip in recovery? Then flash render kernel r3? I´m on Dirty Unicorns!
serial1005 said:
only dirty flash the zip in recovery? Then flash render kernel r3? I´m on Dirty Unicorns!
Click to expand...
Click to collapse
Flash Bootstacks ---> restart recovery ---> install what you need. (kernel/roms/etc)
Anyone with D801 tried this bootstack with blisspop? Tempted to install RenderKernel but I've read about lots of issues, so I've been holding off.
brickwall99 said:
Anyone with D801 tried this bootstack with blisspop? Tempted to install RenderKernel but I've read about lots of issues, so I've been holding off.
Click to expand...
Click to collapse
I just tried with RR with RR kernal and would boot past lg. render might be needed. dunno. flashed Loki again and it booted up right nice.
Sent from my LG-D801 using XDA Free mobile app
Nicholi85 said:
I just tried with RR with RR kernal and would boot past lg. render might be needed. dunno. flashed Loki again and it booted up right nice.
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm, it should work with any CAF kernel. If it boots recovery, the problem can be modem.
If someone else report same issue, I'll take a look
On this new bootstack the download mode work?
daniel.stuart14 said:
Hmm, it should work with any CAF kernel. If it boots recovery, the problem can be modem.
If someone else report same issue, I'll take a look
Click to expand...
Click to collapse
No only with bump kernel,RR stock kernel is not bump.................
KK bootloader works only on bump kernel
samuele94 said:
No only with bump kernel,RR stock kernel is not bump.................
KK bootloader works only on bump kernel
Click to expand...
Click to collapse
RR still using LOKI? That doesn't make any sense, they should sync with cm sources.
daniel.stuart14 said:
RR still using LOKI? That doesn't make any sense, they should sync with cm sources.
Click to expand...
Click to collapse
For me Yes! Candy5 use bump,temasek (of zg85) use bump,Dirty unicorn use bump,vanir of sudosurootdev use bump,bliss use bump but RR with stock kernel won't bot on kk bootloader....
I use kk bootloader with stock kernel on rom I mentioned as bump then I can assure you from personal experience (d802)
Look this https://github.com/ResurrectionRemi...e_lge_g2-common/tree/cm-12.1-caf/releasetools here are bump but kernel won't bot on kk bootloader
samuele94 said:
For me Yes! Candy5 use bump,temasek (of zg85) use bump,Dirty unicorn use bump,vanir of sudosurootdev use bump,bliss use bump but RR with stock kernel won't bot on kk bootloader....
I use kk bootloader with stock kernel on rom I mentioned as bump then I can assure you from personal experience (d802)
Look this https://github.com/ResurrectionRemi...e_lge_g2-common/tree/cm-12.1-caf/releasetools here are bump but kernel won't bot on kk bootloader
Click to expand...
Click to collapse
I'll MP varund, thx
D803 files are missing.
BoostRoid said:
D803 files are missing.
Click to expand...
Click to collapse
I need a tester before posting it here. If you are available, just PM me.
I have some problems with d802 bootstak. With many roms (cm12 offi, bliss, slimsaber ecc), i have random soft reboots, twice at day (2-3). With lollipop stock bootstack (after .kdz flash) i have only One at day with all Roms. Any idea?