@Cloudyfa is back! UltraAlpha has been discontinued.
UltraAlpha testing releases
This is the thread for UltraAlpha testing releases - when the ROM is ready for primetime a separate thread will be created.
In short, this ROM is a continuation of CloudyG2 3.0 - for all variants!
Unfortunately, @Cloudyfa has been unresponsive for a while. The show must go on! Huge thanks to @Cloudyfa.
Requirements:-Must be coming from the respective lollipop stock base of your variant.
-TWRP 2.8.6.1 ONLY!
-SIM unlocking is not currently supported.
-Know the risks of flashing
Expect a new release (v1.0) soon!
Kernels are a huge problem on this ROM - expect NO RELEASES until
Dorimanx Lollipop is stable enough to use.
Code:
Credits:
[user=270378]@Cloudyfa[/user] for all of his wonderful work
Moder Boykinhdi for the signal patch
@dev>null for his variant patches - I was missing a few files and his fix had them
Code:
V0.1 - LINK REMOVED! DO NOT INSTALL! DO NOT INSTALL! DO NOT INSTALL! LINK REMOVED!
Code:
As usual, nobody on XDA is responsible for your phone, cat, thermonuclear testing facility, or anything else.
I'm here if help needed, LS980 on GSM outside USA
_____________________________________Read more write less and be smart
dmezh said:
This is the thread for UltraAlpha testing releases - when the ROM is ready for primetime a separate thread will be created.
In short, this ROM is a continuation of CloudyG2 3.0 - for all variants!
Unfortunately, @Cloudyfa has been unresponsive for a while. The show must go on! Huge thanks to @Cloudyfa.
Expect a release soon - but don't expect a 100% daily driver. Although this may happen soon, it won't be in this thread at all.
Testers are the foundation of this project - please test!
Expect a release some time this weekend.
Code:
As usual, nobody on XDA is responsible for your phone, cat, thermonuclear testing facility, or anything else.
Click to expand...
Click to collapse
I would love to test. Unlocked d800 in united states.
Oh yes .It must be very interesting.
Waiting
I will check it out tomorow again. If I don't forget it then I can give you all the partition files from the European D802 V30A KDZ
I would love to see Flex 2 or G4 features in this new ROM.
stimpy001 said:
I would love to see Flex 2 or G4 features in this new ROM.
Click to expand...
Click to collapse
Anything's possible!
wulsic said:
I will check it out tomorow again. If I don't forget it then I can give you all the partition files from the European D802 V30A KDZ
Click to expand...
Click to collapse
I would love those files!
It seems that the D802 situation is a bit complicated - I thought of using the European files for all D802s but there are bound to be problems and bricks.
I'm actually really confused on the D802 situation. How many different versions of Lollipop for D802 are there?
What I see myself doing with this whole situation is just adding the variants to the installer as I find more of them - so there will be an option for each version (European, Vodafone, etc.)
I would love to help test this! I have a D800 in the US running on AT&T.
FiendFyre said:
I would love to help test this! I have a D800 in the US running on AT&T.
Click to expand...
Click to collapse
Go ahead and test - the first release is up!
Proceed with caution!
Mission starting.... I'm on D800 unlocked as well downloading as I write
dmezh said:
Go ahead and test - the first release is up!
Proceed with caution!
Click to expand...
Click to collapse
Im on d800 what do you mean with caution
---------- Post added at 09:01 PM ---------- Previous post was at 08:57 PM ----------
What is the differences between your rom and stock lollipop
iamtha1 said:
Im on d800 what do you mean with caution
---------- Post added at 09:01 PM ---------- Previous post was at 08:57 PM ----------
What is the differences between your rom and stock lollipop
Click to expand...
Click to collapse
This is a G3 port. What I meant by "caution" is to be careful - this is not 100% stable.
Just a word of caution - please make sure you are all using the LATEST version of TWRP and are on STOCK LOLLIPOP before attempting to install.
Looking forward to some D800 test reports before I jump in
I get an lg security boot error and can't enter recovery. Any help on going back to stock? I've tried a few guides but nothing successful. Using a d800 model
Will be definitely testing when a D801 version comes out!
theinspector said:
I get an lg security boot error and can't enter recovery. Any help on going back to stock? I've tried a few guides but nothing successful. Using a d800 model
Click to expand...
Click to collapse
Try to go back to stock with LG flashtool. I've had the same error before.
No matter what you see, you CAN get into recovery. Try a stock tot/kdz first, and if that doesn't work (when I got the error flashtool would fail, but by running it as admin, making sure a USB 2 port is used, and leaving the device plugged in even if it fails that it worked):
-Power off the device fully.
-Hold Power+Vol down for 2 sec, let it go and hold it again until you see "Recovery Mode" (the LG logo doesn't need to be there when you let the buttons go and press them again)
-Do whatever you need to do from recovery.
TESTERS: Speak up! We need to know more. I hope this is not a ROM issue and that this is an isolated case.
Please, someone let us know how it went!
DO NOT USE AUTOREC ON LP UNDER ANY CIRCUMSTANCES!
There is already [Rom] [5.0.1] CloudyG2 3.0 Modify For D802 V1.1 in this link. Its from Dj_GraFlY.
https://docs.google.com/uc?id=0BxADHj0aSysFVG5hTHVMTmpxVFE&export=download
Installing the firmware:
- Skachayt firmware patch.
- Sdeat backup existing firmware
- Install patch D802_PATCH_GO_LP_droidth.zip
- Reboot again in Recovery (you can do it straight from the Recovery)
- Make WIPE (system \ data \ dalvik cache)
- Set himself ROM CloudyG2 3.0 Modify V1.1.zip For D802)
- Restart
- Finish
So I have to be in Official Lollipop 5.0.2 to install this ROM in TWRP 2.8.6.1?
I m using At&t G2 D800.
ROM : Cloudy G2 v2.2
Kernel : Dorminax 10.3
Related
| Google Edition 4.3 | Untouched | Odexed |
| JWR66Y.S003 | Version 2.0 |
DOWNLOAD LINK - MEGA
DOWNLOAD LINK - MULTIUPLOAD
==================================================
About:
I made this ROM for myself. I wanted a perfect untouched version of the Google Edition firmware without root, zipalign, deodex, mods, etc.
I know some of you would like that too so I decided to post it here on XDA. You can root the phone afterwards if you wish.
The only mod in this version is the faux123's kernel. It's still stock but with some minor changes to fix Security FC and add exFAT support.
==================================================
Special Thanks to:
@faux123 for making the kernel fix for the Security FC issues and adding exFAT support
@The111 for providing me with the untouched system dump
@nintendolinky for fixing the SD Card Read-Only issue
@Chainfire for SuperSU.
==================================================
Changelog:
Version 2.0 (23/09):
- New stock JWR66Y.S003 kernel with Faux123 fixes
Version 1.0 (12/09):
- Initial Release
- Old Faux's Kernel for the moment.
==================================================
Instructions:
Boot to Recovery
Wipe Data if you are not coming from a Google Edition ROM
Flash the zip
If you want root, flash SuperSU
Reboot
==================================================
What's not working:
Sim Unlock gets stuck
Touch to focus on HDR mode
Google Wallet*
*It might work if you flash this: http://forum.xda-developers.com/attachment.php?attachmentid=2163191&d=1375578553
*It will change the build.prop of the ROM to Sprint (L720) to make it work. Thanks to @yeahmann for the zip.
==================================================
OLD VERSIONS
==================================================
Android 4.3 - JWR66Y.S003 - (12/09):
- Changelog:
Version 1.0 (12/09):
- Initial Release
- Old Faux's Kernel for the moment.
Click to expand...
Click to collapse
- Downloads:
Version 1.0:
- MEGA
- MULTIUPLOAD
Click to expand...
Click to collapse
==================================================
Android 4.3 - JWR66V.S014 - (06/08):
- Changelog:
Version 3.0 (08/08):
- Updated kernel with exFAT support
Version 2.0 (07/08):
- Fixed SD Card Read-Only issue
Version 1.0 (06/08):
- Initial Release
Click to expand...
Click to collapse
- Downloads:
Version 3.0:
- MEGA
Version 2.0:
- MEGA
Version 1.0:
- MEGA
Click to expand...
Click to collapse
==================================================
Why wouldnt wallet work? Might have to change the prop...
death1246 said:
Why wouldnt wallet work? Might have to change the prop...
Click to expand...
Click to collapse
Yes, but I'm not going to do that since this is an untouched version.
But I provided a zip to change the build.prop if someone wants it.
Since Google Wallet is not supported in my country I have no way of testing it though. Let us know.
Another question. Why is this almost 100 MB larger than almost all other releases? Is this how big it normally is? I want fully stock GE Edition and im glad someone finally did it. Almost did it myself :3
I will let you know if it works or not. Going to test the wallet app after I see my recruiter.
If it's un touch than fc settings is not fixed?
boterkaaseneieren said:
If it's un touch than fc settings is not fixed?
Click to expand...
Click to collapse
I believe the fc was from using a different build with new lib files. I know what rom you're talking about.
boterkaaseneieren said:
If it's un touch than fc settings is not fixed?
Click to expand...
Click to collapse
Read the "About" section. The only change I made was include the Faux's kernel to fix the FC issue.
death1246 said:
Another question. Why is this almost 100 MB larger than almost all other releases? Is this how big it normally is? I want fully stock GE Edition and im glad someone finally did it. Almost did it myself :3
I will let you know if it works or not. Going to test the wallet app after I see my recruiter.
Click to expand...
Click to collapse
Since I did not delete any files from the original nor deodexed the rom that's the normal size at the end, no need to worry.
Let us know if Google Wallet works after flashing the modified build.prop.
Will this work on my AT&T S4?
google keep and titanium backup (back up to sdcard) is working ?
People in this post http://forum.xda-developers.com/showthread.php?t=2348272 are complaining about the phone getting hot and about not being able to save photos to SD Card. Did some one experienced any problems like these with this firmware?
I think I'll stick with JWR66V.S001.130708 for now.
xarda said:
google keep and titanium backup (back up to sdcard) is working ?
Click to expand...
Click to collapse
Google Keep is working just fine.
I don't have an SD Card to test Titanium here with me right now.
does this also have sim unlock bug?
Thanks for the ROM, and the effort of course. I was having problems with my extSdCard and will test it, and will let you know the outcome.
coilfan said:
Thanks for the ROM, and the effort of course. I was having problems with my extSdCard and will test it, and will let you know the outcome.
Click to expand...
Click to collapse
Let me know as soon as you can so I can edit the bug list in the first post. Thank you.
Enviado de meu GT-I9505G usando Tapatalk 4
MaKTaiL said:
Let me know as soon as you can so I can edit the bug list in the first post. Thank you.
Enviado de meu GT-I9505G usando Tapatalk 4
Click to expand...
Click to collapse
The ROM is, like all the other recent 4.3 ROMs, stable and fast. Unfortunately the extSdCard issue is exactly the same. Hopefully this will be resolved soon. Many thanks for the effort. :good:
---------- Post added at 06:33 PM ---------- Previous post was at 06:10 PM ----------
Just one quick question. My i9505 is currently on baseband XXUBMGA, and working fine. However, I was just wondering if it would be possible at all, and and advisable to install the stock baseband which comes with the i9505GE 4.3 version.
I did test your rom and it is pretty clean and does work really smooth indeed. But the phone becomes a lot hotter than with the previous leak and also battery seems to drain really quick while browsing with chrome. Also the sim unlock bug is still there. I just did a restore of the previous build I used.
Planet X said:
I did test your rom and it is pretty clean and does work really smooth indeed. But the phone becomes a lot hotter than with the previous leak and also battery seems to drain really quick while browsing with chrome. Also the sim unlock bug is still there. I just did a restore of the previous build I used.
Click to expand...
Click to collapse
Thanks for reporting. I updated the bug list on the first post.
Unfortunately these issues are out of my reach to fix. I know little about coding roms.
As soon as our awesome devs fix them I'll sure include in my rom for you guys.
Regarding battery life, for me it's the same. It lasts for a day if I let it on 3G but it drains like crazy with 4G.
EDIT
I was reading in another forum and the problem you have with ExtSDCard is probably because you have it formated as exFAT which the Stock Kernel does not support.
Format it as FA32 and you won't have an issue or wait for a custom kernel with the support.
MaKTaiL said:
Thanks for reporting. I updated the bug list on the first post.
Unfortunately these issues are out of my reach to fix. I know little about coding roms.
As soon as our awesome devs fix them I'll sure include in my rom for you guys.
Regarding battery life, for me it's the same. It lasts for a day if I let it on 3G but it drains like crazy with 4G.
EDIT
I was reading in another forum and the problem you have with ExtSDCard is probably because you have it formated as exFAT which the Stock Kernel does not support.
Format it as FA32 and you won't have an issue or wait for a custom kernel with the support.
Click to expand...
Click to collapse
I don't think that's the reason, because in previous stock version the SDCard in exFAT works just fine for me. But thank you for your effort! I'll keep an eye on this thread.
Hi.
This is United Oxygen team.
We are going to show Official BlissPop for Optimus G Pro with our jolla-kernel ported for G Pro.
This thread is going to be renewed soon.
!NOTICE!
This ROM contains jolla-kernel, which means this ROM supports MultiROM.
RIL is almost FIXED!
When we make a stable ROM, I will re-design our CM thread with PC.
But now, I would just write with mobile, dirty, like this.
And, we'd finally changed our host server, from Innoloud to AchonApp, due to Innoloud's lots of bugs.
What doesn't work:
- T-Money (Korea)
- MMS (Only for F240L - Test with Hangouts, please.)
- Maybe More? You tell me.
You should check:
- Camera (Including 3rd party Camera)
- Installation of Minecraft APK (One Korean said he cannot install it.)
- RIL if it is stable or not now.
ROM Download:
* Optimus G Pro (Korea/Intl)
http://lap.so/krpi
(Download 1021 version.)
(Please select right carrier version for F240. E980 users should download e980 named ROM.)
* Optimus GK
http://lap.so/btme
(Download 1021 version.)
What's Updated:
* 2015.11.11
- Second Release.
- OTA Added - you can download tweaks or kernel updates via OTA app.
- jolla-kernel 5.1 added.
@Genie's, please support Optimus Gx F310!. Thanks in advance.
Can I run any 5.1.1 gapps with this rom
DLM2583 said:
Can I run any 5.1.1 gapps with this rom
Click to expand...
Click to collapse
Yes, you can.
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
We are now tring to support E980.
Please download E980 version and test ROM and whether MultiROM is supported or not.
If you install this ROM in Primary Slot, please enter this adb command to know us what E980's kexec code is. :
adb shell
su
dmesg | grep -i hardboot
Hey there I ran the ROM all day today and battery drain is pretty bad and its coming from Google play services...... I'm using Google experience launche.... But i don't think its the Google now cards that are the problem any ideas
We can't solve the probelm associated with Google Play Services... I just recommend you to use Greenify to hibernate some Google Service.
Have been using & pretty good rom.thanks!
Can u only post the kernel so we can use this on any cm based roms and on every new builds.. Is it possible ?
@Genie's, brother, can you share the kernel separately? I love your ROMs, and want also to test other ROMs using OxyGen kernel. Best kernel for F240 so far!
Does it work with E980 yet I am confused by the original post and the one below it?
rjmxtech said:
Does it work with E980 yet I am confused by the original post and the one below it?
Click to expand...
Click to collapse
Oh, I'm sorry. I fixed my first thread. E980 is supported now.
Sent from my Galaxy S4 (SHV-E300S) using XDA Mobile App
DLM2583 said:
Thanks I'm running the ROM already but can't find APN setting I went into wireless and networks but I don't find mobile data option to add new APN so I don't have mobile data
Click to expand...
Click to collapse
Go into settings >data> click 3 dot menu upper right side and you will found the mobile network on last tab. Hope its helpful.
Sent from my LG-F240L using XDA Free mobile app
Yeah thanks it toko me at least two days to figure this one out but thanks
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Genie's said:
Updated!
Download 0626 Version!
ChangeLog :
- Oxygen Kernel V2.5 Applied! (Which means new ramdisk applied and could be ported to other e980 ROMs!)
- RIL would be go normally when you reboot 5-6 times. It' hard to fix.
- RIL Fix for LG U+
Click to expand...
Click to collapse
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Hamza1010 said:
Will this kernel work on stock 5.0.2 lollipop rom E980.? Any ideas
Click to expand...
Click to collapse
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Genie's said:
Of course, not.
Kernel used in Stock and CM are each different.
Sent from my LG G3 using XDA Mobile app
Click to expand...
Click to collapse
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Hamza1010 said:
Thanks for answering.Is there any other featured kernel you know of that I can use on my current rom.??
Click to expand...
Click to collapse
I don't know well about E980 cuz I'm living in Korea.
Maybe...You should find them in OpGpro Threads.
Sorry.
Sent from my LG G3 using XDA Mobile app
rom removed! Moving to aospa-l
PATCHES / BASEBANDS
D805/6 Baseband:
This baseband is a version modified from d802 LP, it makes possible to boot on these variants & enable all the 4g bands, that they support.
You can found on my website.
Low Mic FIX:
Here, install it after installing rom. Next build will come with it.
Changelog:
Device Source Changes:
Code:
[B]Device 1.0 Slim Changes:[/B]
-Initial version
-Allow lower brightness for manual and auto mode
-Disable 4k recording (not working as it should)
-Bump
-Disable LCD hack (now, is flashing kernel as stock cm)
Strix Kernel Changes:
Code:
[B]Strix 1.0 Kernel Features:[/B]
-Fastcharge 3.1 (Thx: @Dorimanx)
-No LCD detection hack
-3.4.108 sublevel
-CRC Disable
First here...roms coming fast and thick...thank you for more options
@daniel.stuart14
Judging by the fact the bootstacks are based on your git and not Dr Gravy's or rasheds, you put the bootstacks together yeah? Didn't fork them?
Lawlrus said:
@daniel.stuart14
Judging by the fact the bootstacks are based on your git and not Dr Gravy's or rasheds, you put the bootstacks together yeah? Didn't fork them?
Click to expand...
Click to collapse
Forked, my site just redirects.
I edited all, to work with assert
Here it's
daniel.stuart14 said:
Forked, my site just redirects.
Here it's
Click to expand...
Click to collapse
Well if you used rasheds, you might want to test your download mode as people have reported it being broken.
If you forked them from dr gravy you should be fine, but honestly I'd suggest linking to the official gits as opposed to redirecting them to one of yours.
Will stop possible drama, and if they do update the bootstacks because of something else that might be wrong with them, then its dumbed down, you won't need to keep making sure they're up to date.
Lawlrus said:
Well if you used rasheds, you might want to test your download mode as people have reported it being broken.
If you forked them from dr gravy you should be fine, but honestly I'd suggest linking to the official gits as opposed to redirecting them to one of yours.
Will stop possible drama, and if they do update the bootstacks because of something else that might be wrong with them, then its dumbed down, you won't need to keep making sure they're up to date.
Click to expand...
Click to collapse
All the variants are from Dr Gravy, except d802 (newer aboot) and f320 (I add the bump option). I can't redirect to dr gravy, because his version doesn't has assert. All my bootstacks zip have.
Hey @daniel.stuart14 sorry for the noob question but i always had this doubt, I have a D805, i know that to use the CAF version of the ROMs i need to use the D802 LP bootstacks and a D805 modem but in every CAF ROM i tried i got soft reboots and noticed that is related with modem (3G or 4G) or GPS, and now I'm really confused because of the LP bootstacks update. How should I install the bootstacks in order to be able to install and run your ROM in my D805? (Just asking this here cause you are Brazilian and should have the same device as me). Thanks for the great work
igoorsoouza said:
Hey @daniel.stuart14 sorry for the noob question but i always had this doubt, I have a D805, i know that to use the CAF version of the ROMs i need to use the D802 LP bootstacks and a D805 modem but in every CAF ROM i tried i got soft reboots and noticed that is related with modem (3G or 4G) or GPS, and now I'm really confused because of the LP bootstacks update. How should I install the bootstacks in order to be able to install and run your ROM in my D805? (Just asking this here cause you are Brazilian and should have the same device as me). Thanks for the great work
Click to expand...
Click to collapse
Hey mate!
Here with hybrid bootstacks + my edited baseband (see 2# post), is working flawless.
Just install the bootstacks from my site, and then, the d805 modem.
Give a try, if you still getting issues, just tell me. :highfive:
D802 loops at LG logo. Not booting at all. Obrigado pelo seu trabalho!
dnsp said:
D802 loops at LG logo. Not booting at all. Obrigado pelo seu trabalho!
Click to expand...
Click to collapse
Did you flash my hybrid bootstacks? They are modded to work with my kernel & stock LP.
Yes.
bootlooping here as well on D802.
dnsp said:
Yes.
Click to expand...
Click to collapse
shinaipt99 said:
bootlooping here as well on D802.
Click to expand...
Click to collapse
Guys, can you try this?
I think I found the problem, the new way of flashing kernel was not working as well it should on G2. Fixed in next build.
Still no avail. The LG logo shows up for about 6 seconds following a brief blank screen then it restarts.
dnsp said:
Still no avail. The LG logo shows up for about 6 seconds following a brief blank screen then it restarts.
Click to expand...
Click to collapse
Hmmm, my only guess is the baseband. (This is the only thing diferent between mine and yours).
Try this. and say to me if works. I'll update the bootstacks then.
It's ok now, booted just fine.
dnsp said:
It's ok now, booted just fine.
Click to expand...
Click to collapse
Thank you, I'll update bootstacks modem. (I think I put the d805 version in it, just a mistake )
Mines just got a bootloop too using my the bootstacks+ D805 modem but I couldn't reboot to recovery in the comum way, but I got it thanks to the g2 community in g+ and reflash the older bootstacks from rashed and it worked as before.. Very Strange, can you double check if its really working for D805?
Hello, everybody! Today, I'm bringing up here my hybrid bootstacks packages.
WARNING #1: Messing with boot partitions can be dangerous. Don't try it if you don't know what a BRICK means!
WARNING #2: You must flash a BUMP recovery before trying it, I recommend @blastagator one!
WARNING #3: It only supports BUMP kernels, so, checkout with your rom maintainer before flashing!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in these packages
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
Why use hybrid boostacks?
If you're on CM-12.1, CM-13.0 or even LP STOCK, you'll need flash a boostacks, but why use hybrid?
Hybrid bootstacks were made thinking on stability and being as closest as possible to stock.
All of them, use the most recent aboot/laf & modem compatible. Also, devices without official lollipop have here a workaround:
-D803 variant has its own package, that brings KK files, with a modified d801 lp baseband.
-L22 variant has its own package, that brings KK files, with a modified d802 lp baseband.
Also, if you are still not satisfied, I made a WIKI with many infos about bootstacks, that you can found on my github or the most important parts here:
Supported devices:
D800
D801
D802
D803 (KK + LP BASEBAND)
D805/6 (SAME PACKAGE FOR THESE TWO VARIANTS)
F320K/L/S (ONE PACKAGE FOR EACH VARIANT)
L22 (KK + LP BASEBAND)
LS980
VS980
What is bootstack?
It's a set of images, that are essential for your device. These hybrid bootstracks use all the images from lollipop, except aboot, which is from kitkat. So, we can have bump working with LP partitions.
What is in it? (Except D803 & L22)
-Aboot (KK)
-Dbi (LP)
-Laf (LP) (BUMP)
-Modem (LP)
-Persist (LP) (Except LS980)
-Rpm (LP)
-Sbl1 (LP)
-tz (LP)
Which roms it works?
CM-12.1, and any rom based on it. (Except RR with stock kernel. Workaround: Custom kernel.)
CM-13.0, and any rom based on it.
LP STOCK, and any rom based on it.
What is assert?
Assert is a command line in zip script, it checks if you're flashing a compatible bootstrap with your device.
Why it only supports bump?
Because I updated all the aboot files to KK, and only JB supports loki.
Why you updated aboot to KitKat?
Because KK bootloader is more reliable, and I can merge the original kernel cmdline.
I can't enter in recovery, why?
My aboot files are the most recent KK versions, some of them have a new way to enter in recovery:
-Old Way: Hold power + vol down, then, release and hold power + vol down again.
-New Way: Hold power + vol down, then, release and hold vol up + vol down.
How D803 and L22 are available, if they're stuck on KK?
-D803 is using D803 KK bootstacks, except by the modem, that is the same from D801, but, edited with D803 modem files.
-L22 is using L22 KK bootstacks, except by the baseband, which is the same from D802, but, edited with L22 radio files.
Why Laf isn't giving secure booting error, if we're using LP version?
-As everybody knows, until now, we were using KK Laf + KK Aboot. This was because new LP images have a new image signature. So, to make it boot on KK Aboot, I broke LP signature (Extracting the ramdisk and packing it again) and then I bumped it using open_bump.
More info about files: github.
DOWNLOADS:
D800 Hybrid Bootstacks
D801 Hybrid Bootstacks
D802 Hybrid Bootstacks
D803 Hybrid Bootstacks
D805/6 Hybrid Bootstacks
F320K Hybrid Bootstacks
F320L Hybrid Bootstacks
F320S Hybrid Bootstacks
L22 Hybrid Bootstacks
LS980 Hybrid Bootstacks
VS980 Hybrid Bootstacks
Thanks to:
- @Rashed97 , for all his work, and the original zip packages.
- @Drgravy , for the updated bump packages, that I use as base.
Issues & Requests:
If you found a bug, want request a variant support, or even found a newer boot(aboot/modem/laf/etc...) file, you can request it HERE.
If you want a quickly answer, I really recommend posting it there.
Attention! Devices stuck on JB will not be add! Ex: L-01F DOCOMO
ONLY FOR DEVS:
With my bootstacks (and others with KK aboot), roms can be more stock, than using old loki packages (With JB aboot).
With KK aboot, we can:
Delete LCD hack script, and use stock CM boot flash way. (KK Aboot sets LCD type, by itself) (NO MORE PERMANENT LCD DAMAGE!)
Use new tags_addr 0x00000100
Delete cmdline entries: msm_rtb.filter=0x0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_g2_lgd_cmd (Aboot auto-sets it.)
Revert this JB hack.
The good thing here, is that it'll not explode devices using old JB aboot, because these devices won't be able to boot these roms. (the new tags_addr makes JB bootloader stops until user restart it to recovery.)
Attention: DON'T DO ANY OF THESE MODIFICATIONS ON RECOVERY! RECOVERIES MUST BE UNIVERSAL!
reserved 2
Flashed on d802 Dirty Unicorns + Render R3. All working. Thanks
Great and usefull work. Thank you
Enviado desde mi LG-D802 mediante Tapatalk
I hope this solves problems with Render Kernel, thank you
Render Kernel finally booted.
Excellent work! :good:
only dirty flash the zip in recovery? Then flash render kernel r3? I´m on Dirty Unicorns!
serial1005 said:
only dirty flash the zip in recovery? Then flash render kernel r3? I´m on Dirty Unicorns!
Click to expand...
Click to collapse
Flash Bootstacks ---> restart recovery ---> install what you need. (kernel/roms/etc)
Anyone with D801 tried this bootstack with blisspop? Tempted to install RenderKernel but I've read about lots of issues, so I've been holding off.
brickwall99 said:
Anyone with D801 tried this bootstack with blisspop? Tempted to install RenderKernel but I've read about lots of issues, so I've been holding off.
Click to expand...
Click to collapse
I just tried with RR with RR kernal and would boot past lg. render might be needed. dunno. flashed Loki again and it booted up right nice.
Sent from my LG-D801 using XDA Free mobile app
Nicholi85 said:
I just tried with RR with RR kernal and would boot past lg. render might be needed. dunno. flashed Loki again and it booted up right nice.
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm, it should work with any CAF kernel. If it boots recovery, the problem can be modem.
If someone else report same issue, I'll take a look
On this new bootstack the download mode work?
daniel.stuart14 said:
Hmm, it should work with any CAF kernel. If it boots recovery, the problem can be modem.
If someone else report same issue, I'll take a look
Click to expand...
Click to collapse
No only with bump kernel,RR stock kernel is not bump.................
KK bootloader works only on bump kernel
samuele94 said:
No only with bump kernel,RR stock kernel is not bump.................
KK bootloader works only on bump kernel
Click to expand...
Click to collapse
RR still using LOKI? That doesn't make any sense, they should sync with cm sources.
daniel.stuart14 said:
RR still using LOKI? That doesn't make any sense, they should sync with cm sources.
Click to expand...
Click to collapse
For me Yes! Candy5 use bump,temasek (of zg85) use bump,Dirty unicorn use bump,vanir of sudosurootdev use bump,bliss use bump but RR with stock kernel won't bot on kk bootloader....
I use kk bootloader with stock kernel on rom I mentioned as bump then I can assure you from personal experience (d802)
Look this https://github.com/ResurrectionRemi...e_lge_g2-common/tree/cm-12.1-caf/releasetools here are bump but kernel won't bot on kk bootloader
samuele94 said:
For me Yes! Candy5 use bump,temasek (of zg85) use bump,Dirty unicorn use bump,vanir of sudosurootdev use bump,bliss use bump but RR with stock kernel won't bot on kk bootloader....
I use kk bootloader with stock kernel on rom I mentioned as bump then I can assure you from personal experience (d802)
Look this https://github.com/ResurrectionRemi...e_lge_g2-common/tree/cm-12.1-caf/releasetools here are bump but kernel won't bot on kk bootloader
Click to expand...
Click to collapse
I'll MP varund, thx
D803 files are missing.
BoostRoid said:
D803 files are missing.
Click to expand...
Click to collapse
I need a tester before posting it here. If you are available, just PM me.
I have some problems with d802 bootstak. With many roms (cm12 offi, bliss, slimsaber ecc), i have random soft reboots, twice at day (2-3). With lollipop stock bootstack (after .kdz flash) i have only One at day with all Roms. Any idea?
Hi all.
Im d802 owner, and sometime devs give roms, o preview only for d800 (thank devs anyway for supporting our phone).
So, i ve reworked a file zip made some time a go by @blastagator, that simply convert d800 rom to d802.
Ps: I m not English, im Italian, so sorry for some errors i will try to write the best i can.
Pay attention:
This is a PORT method. Is not stable like building someting from source, and is always better to use something compiled for the d802.
Anyway, in all rom that i ve tryed all worked as intended.
HTML:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war.
Please do some research if you have any concerns about using custom ROMs/Kernels.
You are choosing to make these modifications, and if you point the finger at me for
messing up your device, I will laugh at you.
So, we can start now.
>>>>>JUST FLASH IN RECOVERY:
Downloads d802:
Choose the right zip:
For Cm based v4 roms: Mega
For Aosp basedv4 roms: Mega
Downloads d800:
AOSP:
Mega
CM:
Mega
Download vs980:
TEST AOSP by DjWald:
AndroidFileHost
TEST CM :
Soon
If the rom you ve downloaded wont flash, do this:
First of all, you have to edit the updater script of the rom that you wanna try, to allow Twrp to flash it.
You will need (optional):
Zip viewer (personally i use 7zip)
HTML:
http://www.7-zip.org/download.html
-notepad ++
HTML:
https://notepad-plus-plus.org/download/v6.9.1.html
-patience
HTML:
https://www.youtube.com/watch?v=ErvgV4P6Fzc
Step 1 (if your rom don't have this lines, skip it):
-Extract rom.zip to any folder;
-Navigate to META-INF\com\google\android\
-Open updater-script and replace this 2 lines (change d800 with d802)
HTML:
assert(getprop("ro.product.device") == "d800" || getprop("ro.build.product") == "d800"
-Repack rom.zip without compression and in .zip extension
-Copy to your phone
Step 2 (do only this if the rom dont have flash variant check):
-Backup your current ROM (optional)
-Backup EFS (higly suggested, but optional)
-Flash Rom.zip to your phone
-*****Flash D800 to D802 patch (WARNING: If you dont do this right after the flash of d800 rom, you will softbrick your device; you can recover it by simply go into recovery)
-Flash gapps
- I higly raccomend you to flash Lambda or HHKernel to avoid boot.img incompatibilities, just after the apllication of the patch (HH kernel is only for Aosp Based Roms).
-Enjoy!
-***** choose the right one, for Aosp or Cm based Roms.
Whats in Zip:
- Cyanogen Mod Kernel in Cm version
- Candy6 in Aosp version
- System Files from Cm\Aosp
- A script from the mighty @blastagator rewrite in some point by me.
CREDITS
@blastagator for the zip, the script, the recovery and all!
@GalaticStryder
@zg85
@xpirt for the how to extract Dat
@pastsomeone \ yairpatch for all the roms he makes (its to flash he s roms that i ve did this) (follow him on G+)
@all the developers here that makes g2 a fantastic device
@CyanogenMod, Aokp, LiquidDark, Aospb and all the custom roms that makes android magic
@xda
If i haven't mentioned some one, contact me and i will do it!
Thanks. Will be very useful.
Tnx man, appreciated
Στάλθηκε από το Tesla powered G2 D802 μου
It works as it should, THANK you very much. I've tested it with PureNexus ROM, XenonHD etc. all d800 builds work on my d802!!!
very nice thanks for this .. but could you make it the othe way around.. make it for us d800 users to use on d802 CM or AOSP roms.
It brokes network switcher on AOSP by yairpatch
Both versions V2 and V4 don't work for me. V1 works great!
I tested V4 with Beanstalk 6.15 and it leads to bootloop.
@paul89rulez can you please reupload or make the firts release downloadable?
Thanks
Beanstalk its cm. You flashed the correct One?
paul89rulez said:
Beanstalk its cm. You flashed the correct One?
Click to expand...
Click to collapse
No I didn't.
Thanks
modest.young said:
No I didn't.
Thanks
Click to expand...
Click to collapse
So, last relase working well? For me no problems.
paul89rulez said:
So, last relase working well? For me no problems.
Click to expand...
Click to collapse
Still the same result -> bootloop
Edited ROM.zip
CM v4 patch
CM HH kernel v2.5
A-GAPPS
HH kernel is only for Aosp roms!
Thank Paul. I can confirm latest version works very well. Did a test with Pure Nexus Layer Rom. Good job!!!
Sent from my LG-D802 using Tapatalk
paul89rulez said:
HH kernel is only for Aosp roms!
Click to expand...
Click to collapse
zg85 released a CM version of HM
https://www.androidfilehost.com/?fid=24521665358595649
paul89rulez said:
HH kernel is only for Aosp roms!
Click to expand...
Click to collapse
again can you make on for us d800 to d802 .?
paul89rulez said:
So, last relase working well? For me no problems.
Click to expand...
Click to collapse
Yes, I can confirm that v4 works. It was my fault. I tried both PURE NEXUS ROMs variants and I was able to boot in to it!
Thanks
:good:
d800 Aosp test build Up
Any report for d800 test version?
edi194 said:
It brokes network switcher on AOSP by yairpatch
Click to expand...
Click to collapse
I'm facing the same problem on my purenexus layers rom. Ive used the patch to install D800 purenexus on my D802.
Is there a fix for this ? Purenexus is running so smooth and i really want to keep it but my network is messed up , it struggles to find network.
Any kind of help would be really appreciated
---------- Post added at 12:30 PM ---------- Previous post was at 12:21 PM ----------
neetee said:
Thank Paul. I can confirm latest version works very well. Did a test with Pure Nexus Layer Rom. Good job!!!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Did u experience any network issues ? which method did u use to patch ?
@machinehead121 for some people network switcher is working. For me on any rom from Yair network switcher isn't working, only when i've reinstalled stock rom from scratch and installed everything again "it worked" (it locked to LTE and can't change to nothing).