Develop Bugs

Help! Can't connect the device to PC

Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!

oxydiom said:
Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!
Click to expand...
Click to collapse
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Then Use the RUU tool attached! and put your favorite xxx.nbh in the folder
Enjoy~~

Try Start/settings/connections/usb to pc and click or unclick the check mark.

dioxda2 said:
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Click to expand...
Click to collapse
How can I do it?
norwstman30 said:
Try Start/settings/connections/usb to pc and click or unclick the check mark.
Click to expand...
Click to collapse
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!

oxydiom said:
How can I do it?
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!
Click to expand...
Click to collapse
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated

dioxda2 said:
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated
Click to expand...
Click to collapse
You know! Another problem!
I forced the device to the bootloader but it can't connect to PC. My PC founds a new hardware: USB Drive and cannot install it...
What should I do now??!

Have u installed some someware likes cisco VPN

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

Could you tell me what driver you found that fixed the issue?

branden7 said:
Could you tell me what driver you found that fixed the issue?
Click to expand...
Click to collapse
The file "VistaRUU" in the link below:
HTML:
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/

my device does not connect also. it says the computer does not recognize this usb device?help

naveen said:
my device does not connect also. it says the computer does not recognize this usb device?help
Click to expand...
Click to collapse
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^

dioxda2 said:
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^
Click to expand...
Click to collapse
i will try that right now. thank you for the tip
i tired, it did not work. quick question, i called htc for help and they belive the device has failed. i think i have installed some program that is confusing the active sync because it is not completely installed. the program is called netcf something. any feedback would be great!

MTP Application

Getting MTP application crash when connecting with USB..
annychange of downloading it somewhere ?
Can't use odin/kies.

do0fusz said:
Getting MTP application crash when connecting with USB..
annychange of downloading it somewhere ?
Can't use odin/kies.
Click to expand...
Click to collapse
This doesn't belong in the development section.
As for your answer:
You do not need the MTP application to connect to odin (READ the FAQ!)
As for the application, it will probably work if you flash new firmware. Alternatively, if you don't want to do that, return the phone to your retailer.
/solved

On JG1 the app is crashing..

i'm sorry for asking developers if they concure the problem or have any idea..
without MTP i'm not able to connect with USB..
so, i can't flash, or update, or....

do0fusz said:
i'm sorry for asking developers if they concure the problem or have any idea..
Without mtp i'm not able to connect with usb..
So, i can't flash, or update, or....
Click to expand...
Click to collapse
You DO NOT need mtp to flash!
Het is echt heel simpel de tutorials te volgen. Die MTP applicatie is alleen in android. Maar android staat UIT als je flasht!

do not need... depends.
if you like the simple way, (update.zip) yes.. you do.
the pc wont reconize SGS without the application.
en ja, de tutorials lees ik aandachtig.
en ik gebruik ook de search optie..

You never need it..
If you put the mobile into the download mode, start KIES and the drivers will be installed (or choose reinstall from menu).
And if you want to use update.zip then you are connected via adb-bridge..
So no need for MTP! MTP is just for syncing and with FW JG1 it was dead (infinite start of the app).
Also MTP will not start on other launchers, except of TouchWiz!

Well we said you should flash your device. We didn't say anything about installing an update. The update will most likely not solve your problem. A flash definitely will.

true..
syncing the SGS with outlook is a b*tch..
gonne try a diffrent way, maybe true the gmail account

Yeah!
A good syncing utility like iTunes for the iPhones would be great for android devices..

thE_29 said:
A good syncing utility like iTunes for the iPhones would be great for android devices..
Click to expand...
Click to collapse
Well iTunes has its problems too ... but in most cases it does what it should. Something that cannot be said about Kies.

In JP3 the MTP application is working again.

[SOLVED] How to get MTP to work on Ubuntu 12.04 LTS?

How do I get it to work? What packages do I need?
EDIT: I noticed I had a few available updates, and two of them were regarding MTP. Some MTP runtimes and something else related to MTP. Now, Ubuntu discovers my nexus.

Theshawty said:
How do I get to work? What packages do I need?
Click to expand...
Click to collapse
MTP works natively with 12.04. Did you try ?

deeren said:
MTP works natively with 12.04. Did you try ?
Click to expand...
Click to collapse
Yeah, I tried connecting my Gnex to Ubuntu but it didn't seem like it found the device. I'm running the Xfce desktop on my Ubuntu install, if it matters. (Not Xubuntu, I installed Xfce over regular Ubuntu)

Perchance are you running Jellybean? Never had any issues with it on CM9..but JB won't show any files on the device when it connects...should be sorted out by the time full JB is released I would assume...if not CM10 will get it straight..

Same question...
Envoyé depuis mon Galaxy Nexus avec Tapatalk

I have the same problem since I flashed JellyBean, now I can see DCIM and Pictures folders as I set PTP and I'm using adb to push and pull files and folders (like backups).
I looked (and I'm still looking) for a good adb GUI to set in ubuntu, this would be a good solution, I tried setting QtADB but it doesn't work for me.

yeah, I'm running Jellybean.

Update: MTP now works.
EDIT: You can manually download it if you don't have it: https://launchpad.net/ubuntu/precise/+source/libmtp

Mine isn't working, get this error "DBus error org.freedesktop.DBus.Error.Noreply: Did not receive a reply" I just updated the MTP libraries...
Sent from my Galaxy Nexus using xda app-developers app

It's back to how it was before. Inconsistent with problems... waiting for CM10 to get it fixed...

Check out this project:
https://github.com/sole/aafm
a very nice GUI using adb commands to explore files on your device.
It's really easy to set up on ubuntu 12.04 and adb is really faster than MTP!
This is a saver to me!

Works great
FrancescoGato said:
Check out this project:
https://github.com/sole/aafm
a very nice GUI using adb commands to explore files on your device.
It's really easy to set up on ubuntu 12.04 and adb is really faster than MTP!
This is a saver to me!
Click to expand...
Click to collapse
Worked Beautifully for me, I was a bit put off by it being a repository, and being an (ex) windows user I don't like anything that needs compiling, but it was pretty effortless. Actually no Compilation was required. Now I am in no hurry for them to fix that MTP trash!

I'm running 12.04 LTS with all the updates installed. My XT530 runs 2.3.5 and my SGY runs 2.3.6. Both don't get recognized at all by the system. Oh, they connect, all right. But I'm desperate to get them working with Calibre, so that I don't have to manually drag my files to the respective folders when I can directly use the "Send to Device" function.
Just lazy, I guess.

FrancescoGato said:
Check out this project:
https github.com/sole/aafm
a very nice GUI using adb commands to explore files on your device.
It's really easy to set up on ubuntu 12.04 and adb is really faster than MTP!
This is a saver to me!
Click to expand...
Click to collapse
Hey, man!
Tested this method with a GT-N7000 Galaxy Note (4.0.3) and with a LG P500 Optimus One (2.3.6), works great on both devices!
Perhaps this method works for all Android-based devices, since it uses adb?
Anyway, thank you very much for the suggestion!

Forget MTP...
... I am switching back to USB mass storage.
I enabled USB debugging on my GT-7000 Gingerbread 2.3.5 (ok, I know my phone is off-topic) and it worked flawlessly on Ubuntu 12.04.
Now I can add and remove files whenever I want, without depending on Kies.

Yes, there is USB mass storage on Ice Cream Sandwich!
I guess I am the only one posting to this thread, but here it goes:
I updated my Galaxy Note GT-N7000 to ICS 4.0.3. To enable mass storage, click (or tap ) settings. Under Wireless and network, tap "More..." and select "USB utilities". Tada! There is our beloved usb mass storage! Just tap the damn button and connect to your PC the way you used to. No drivers required. (tested on a friend's Windows 7 notebook without Kies)

this solved it for me
use this great script / ppa:
http://www.webupd8.org/2012/12/how-to-mount-android-40-ubuntu-go-mtpfs.html
worked for me, my ubuntu 12.10 and my one x on Jelly Bean 4.1.1.
it updates libmtp, adds an unity-mount-unmount-launcherscript and go-mtpfs. (had to reboot)
now it's fast and stable.

With FUSE filesystem you can use Go-mtpfs from WebUpd8 PPA or if you have already installed android sdk tools you can try aafm https://github.com/sole/aafm Android ADB file manager.
Inviato dal mio Galaxy Nexus con Tapatalk 2

BigFatTony said:
worked for me, my ubuntu 12.10 and my one x on Jelly Bean 4.1.1.
it updates libmtp, adds an unity-mount-unmount-launcherscript and go-mtpfs. (had to reboot)
now it's fast and stable.
Click to expand...
Click to collapse
Lots of thaaaaaaanks, made me releived from such a long-term pain!!!
Worked perfectly for me. :good:
I used the original method (from Bilal's Blog) that is mentioned in the tutorial, not the graphical way.
Ubuntu 12.04 & Samsung Galaxy Nexus

[Q] Locked phone

Hey guys,
My girlfriend's wildfire s is locked due to forgeting the lock pattern and tried many patterns. She enters the email saying that its right but phone says its wrong. Any way to fix this?
Sorry for bad english

nks13 said:
Hey guys,
My girlfriend's wildfire s is locked due to forgeting the lock pattern and tried many patterns. She enters the email saying that its right but phone says its wrong. Any way to fix this?
Sorry for bad english
Click to expand...
Click to collapse
She forgot the unlock pattern or google email/password? If she forgot the pattern, then there is no way afaik except a factory reset by going to boot loader. If its the google email password, just visit their website on a pc and click forgot password.

Both
Sent from my LT30p using Tapatalk 4 Beta

Well if you dont even remember the email, youre f*cked. Only factory reset left...
Sent from my HTC "Marvellous" WFS

connect your phone to conputer using usb cable , download adb and then issue this command via command line/terminal of your pc
adb shell rm /system/data/gesture.key it will delete unlock pattern stored as a file from your phone and bang you are back

cyb3r.pr3dat0r said:
connect your phone to conputer using usb cable , download adb and then issue this command via command line/terminal of your pc
adb shell rm /system/data/gesture.key it will delete unlock pattern stored as a file from your phone and bang you are back
Click to expand...
Click to collapse
Didn't know that. Thank you!
Sent from my HTC "Marvellous" WFS

I did a factory reset. Thanks guys!

Sasmung galaxy S4 mini usb debugging

down vote
favorite
So i had my phone droped from pocket and crack the screen of course i didn't enable usb debugging is there any why u can do this?
I try hooking up with adb console but i cant see build.prop file no where i cant find file , i try enabling with settings.db but it is no use. I need it to hook it up so i can use droid screen or something
any one know the way?

Crowz4k said:
down vote
favorite
So i had my phone droped from pocket and crack the screen of course i didn't enable usb debugging is there any why u can do this?
I try hooking up with adb console but i cant see build.prop file no where i cant find file , i try enabling with settings.db but it is no use. I need it to hook it up so i can use droid screen or something
any one know the way?
Click to expand...
Click to collapse
See
https://forum.xda-developers.com/showthread.php?t=2335799

IronRoo said:
See
https://forum.xda-developers.com/showthread.php?t=2335799
Click to expand...
Click to collapse
I cant fined build.prop in system i cant see it, i try this thing here url

Crowz4k said:
I cant fined build.prop in system i cant see it, i try this thing here url
Click to expand...
Click to collapse
Strange, that's where it should be, that's where mine is (looking in file manager)