Dear All
I would like to get some help on a tablet that I own. The model is SERIOUX S102TAB. When trying to switch on the tablet, the Serioux Logo comes up and afterwards it comes also the Android written logo, however after a couple of seconds it switches off. I tried to find out also the combination of keys in order to enter the recovery mode, however I did not have any success.
I would like to get help in order to get into recovery mode or if this is not possible, I would like to know from where I can download the stock firmware and the software that i can use in order to install the flash the firmware.
Your help is greatly appreciated.
Regards
Related
Hi My Tab N5120 was brikicked, i was trying to install a firmware from Odin then it gave me a failed, and that I was not able to make it work again.
I was able to go to the recovery screen (Volume down - power) after Using Odin for CF-Auto-Root-konalte-konaltexx-gtn5120 and RecoveryCWM6.03.2-GT-N5120, but every time i install a firmware like N5120XXCMG7_N5120BTUCMG7_BTU or N5120ZHBME1_N5120ZZHBME1_TGY it fails.
Can someone Help me please, I have this issue for a month now and no idea how to fix it
Bricked N5120
Did you managed to get your Tablet Unbricked? I just wanted to know because I have an N5120 with a broken LCD+Digitizer but the unit still powers ON, you can hear the Samsung booting sound, it charges and whem you touch the screen you can see the menu changing. Let me know you may be able to use the board inside.
Hello,
Tab3 bought a 10 "(P-5210) to 30 days in Portugal and it just does not load sistrema.'ve Tried entering recovery mode but I can not, just in Odin mode. Anybody know what to do, it is only in sansung screen galaxy tab3 and restarts, this is only called if the mode odin
We need to know what you did, meaning, did you try to load a special rom found on this site? Usually if the load failed then your system will not operate correctly. It is also possible that the tab is faulty. If you DID NOT load any roms or other programs to modify the tab then take it back and have it looked at.
If you did try to load a rom or other software then you will have to reload the OEM Rom (Original Equipment Manufacture). This can be found here. The OEM Rom Firmware you will need is P5210XXUANB4 which is the firmware for Portugal.
Help, i installed the twrp recovery and went about installing a rom but when i went to wipe the phone i wiped everything. So now when i try to boot into recovery it just shows the lg logo with the l.e.d cycling. No idea what to do please help.
Can you get into download mode, If so you can flash the stock .kdz for your device with the lg flash tool and you will a stock functioning phone agin. Then you can root and install TWRP again if you would like just like you did the first time. But make SURE that you use CORRECT kdz for your device model remove the batteries and under you should she something like this eith the X being numbers or letters: LG-XXXXX find the .kdz for the XXXXX value and flash it with the lg flash tool
Thanks alot, its working but its taking its time still only at 14%
Your welcome if you still need help just ask
G3 boots into firmware update only
I recently updated my lg G3 ( Google patch update named Aug-18-2015 etc) and it started to malfunction with resets, crashing and eventually got it stuck in boot loop. Then it booted into a green screen that said "demigod crash handler/tz crash" thrice. Instead of a hard reset I decided to using the lg mobile support tool to fix it. During the upgrade recovery my phone went into download mode/firmware update. I could see the progress bar moving and then get stuck and my mobile would switch off. Took out the battery, disconnected and reconnected the phone and tried the process all over again but in vain. I repeated this at least 8 times and eventually gave up. Now my phone is basically useless and only boots into firmware update. Hard reset doesn't work either. Can somebody please help me fix this?
Android version : 5.0
Kernel: 3.4.0
Firmware : v20t-ame-xx
Go to the site: http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ and search for your device and message me back if it works
red bleud led flash
after i installed twrp latest edition it won't boot into it and it gives me the red and blue led flash even trough the steps by suing the download mode it won't work
HELP PLEASE
Best regards
Exray_NL
okay guys I found a few threads on this topic but none of the links for downloads work. I tried to root my phone and when it rebooted it hung up on the Samsung logo I can get into download mode but I could not access the Android menu from the start screen by holding the volume up button I have tried to flash every possibility through ODIN and have had no luck my samsung Knox has the number one next to it so I know its stripped is there any software at all out there to get my phone working again I don't care about the warranty or the operating system I just want to be able to use my phone if somebody can send me a link or two for the correct software for odin software it would be greatly appreciated and I have tried the usual two regular firmware versions and I've had no luck please help and my phone is an SGH-I317 at&t samsung galaxy note 2
flash recovery through ODIN
then try troubleshooting from there.
factory default etc
Please, somebody help me... I have a SM-T705m which I have rooted with android kit kat. After some months I got updated to the Lollipop and it was running ok, but it wasn't updating via OTA anymore.
Well, it happens that today I reset the tablet to the factory mode to sell it, but it was without unrooting, and then it got stuck on the screen saying "just a sec". I went further and tried to download some versions of the firmware and install it on the Odin3 without knowing exactly the number of the version Cause I couldn't turn on the gadget to look. I just got any firmware with the name of my model and my location (Brazil) on the site Sammobile.com....
But bang.... Now I can't turn it on because it is looping on the logo screen.... I tried to download the lollipop firmware and the kit kat..... Could somebody help me? it is looping and I need to sell it tomorrow. I would really appreciate it.
Boot to recovery POWER + VOL UP then factory reset.
Reflash the stock LL firmware.