[Q] Stuck on bootloop after wiping cache - ZenFone 2 Q&A, Help & Troubleshooting

Hi,
A few minutes ago I was trying to wipe the cache and when i restarted the phone it was stuck in the bootloop and I can't enter recovery either. What should I do? My phone isn't rooted or unlocked

Ok, I solved it installing adb and intel drivers and once I was in command prompt via adb I used the command "Fastboot erase cache" so it is now solved and everything works

same problem, same solution. Thank you

The same here. This bug was not present in earlier version firmware.
Inviato dal mio ASUS_Z00AD con Tapatalk 2

Today new system update. Someone tried to wipe cache?
Inviato dal mio ASUS_Z00AD con Tapatalk 2

Related

[Q] Reboot after Softkey-Mod

Hi all,
i've got a question about this Softkey-Mod
Have anyone tried this Mod on the XZL?
Because after flashing this Mod, my XZL reboots when I mount the system partition RW
+1
Mount works for a short moment after rooting...then, after a not defined time I've got reboots.
Gesendet von meinem C6503 mit Tapatalk 2
mpf37 said:
Hi all,
i've got a question about this Softkey-Mod
Have anyone tried this Mod on the XZL?
Because after flashing this Mod, my XZL reboots when I mount the system partition RW
Click to expand...
Click to collapse
Hi! I've been using this mode for some time now. See this.
Looks like you might need to factory reset (or flash stock ftf) & then root again (assuming you rooted with locked BL). If BL unlocked, then u must have working CWM, so just wipe cache, flash the mod & try again.
Factory reset with wipe of internal storage? But after a factory reset this mod is still there...or do we have to flash back to stock and start from the beginning?
Gesendet von meinem C6503 mit Tapatalk 2
Same Problem after factoryreset and flashing
Sent from my C6503 using xda app-developers app

How to install custom rom...

for installing custom rom u need to copy the zip file into sd card and boot the phone into bootloader by turning the phone off and then press volume down and power key until the bootloader screen appears then select recovery in the bootloader menu by moving to it with volume keys and then press power key a screen will appear with multiple options select the option ''Install from zip'' and select the desired zip and install it after it phone will reboot then reboot it in bootloader mode and flash the desired kernel and reboot it u have successfully installed custom rom..
i hope it helped...
Flashing
You can flash the kernel (boot.img) after installing the rom.zip. But I prefer to do that before flashing the rom. In Clock Work Mod I then ussually wipe Dalvik cache and the cache partition.
Before install the new kernel run a kernel cleaner for possible data lost....
Enviado desde mi GT-I9300 usando Tapatalk 2
_Rube_ said:
Before install the new kernel run a kernel cleaner for possible data lost....
Enviado desde mi GT-I9300 usando Tapatalk 2
Click to expand...
Click to collapse
OK, didn't know that since I've never used a kernel cleaner!
Bolleke1 said:
OK, didn't know that since I've never used a kernel cleaner!
Click to expand...
Click to collapse
Use this for mi is the best: Ultimate_Kernel_Cleaning_Script_v1.0_en_SGS3
Enviado desde mi GT-I9300 usando Tapatalk 2
Thanks
Bolleke1 said:
You can flash the kernel (boot.img) after installing the rom.zip. But I prefer to do that before flashing the rom. In Clock Work Mod I then ussually wipe Dalvik cache and the cache partition.
Click to expand...
Click to collapse
I'm looking all over the internet for a boot.img can you please explain more about how to flash the kernel or show me a topic on this.
I broke my phone and i think this is the way to fix it
I have started another thread for info on flashing a kernel check it out in my profile......
Sent from my HTC Desire C using xda app-developers app

Problem with the installation of any rom

Me after a problem with the sim as it is blocked momentarily I restarted my phone with 10 cm and suddenly you are stuck on the animation, so I decided to install a new rom, starting from 0, ie starting from the stock and then make the the next steps, and I made them all really (Root, CMW, wipe data cache davilk cache, data cache format system etc.) delivery with installation and all is well, but despite the success, when I turn the phone on the block ' animation of the Roma, and despite spending a considerable amount of time (about an hour) does not start, and this problem will reply with different rom, how can I solve? What happened to my phone? Before the problem with the sim everything was fine HELP
Inviato dal mio GT-I8150 con Tapatalk 2
ponemania82 said:
Me after a problem with the sim as it is blocked momentarily I restarted my phone with 10 cm and suddenly you are stuck on the animation, so I decided to install a new rom, starting from 0, ie starting from the stock and then make the the next steps, and I made them all really (Root, CMW, wipe data cache davilk cache, data cache format system etc.) delivery with installation and all is well, but despite the success, when I turn the phone on the block ' animation of the Roma, and despite spending a considerable amount of time (about an hour) does not start, and this problem will reply with different rom, how can I solve? What happened to my phone? Before the problem with the sim everything was fine HELP
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
Are you using CWM? That is important. Also, clear data, cache, dalvik and system if you are flashing CM10 from GB.
Edit: Sorry, noticed you said that...
Sent from my GT-I8150 using xda app-developers app
Yes i have CWM... HELP ME PLEASE
Inviato dal mio GT-I8150 con Tapatalk 2
ponemania82 said:
Yes i have CWM... HELP ME PLEASE
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
do you have a back-up of ur previous working rom?
dec0der said:
do you have a back-up of ur previous working rom?
Click to expand...
Click to collapse
Yes
Inviato dal mio GT-I8190 con Tapatalk 2
ponemania82 said:
Yes
Inviato dal mio GT-I8190 con Tapatalk 2
Click to expand...
Click to collapse
Okay, thats good! is ur back-up saved on external sd card? if it is, try to restore ur working ROM first.
do the following:
1. boot into recovery
2. wipe/ format the following (find the proper entry in the CWM menu structure):
/data
/system
/cache
Dalvik Cache -- please note that this is *different* from the /cache of the previous line!
Internal SD
Leave the External SD! DO NOT FORMAT!
3. restore ur back-up ROM
4. reboot
I have installed several times the rom on galaxy w, always with a good result, but one day when riavviai normally my phone with above cm10, went into bootloop for no reason, at this point ripristinai everything and re-installing gingerbread, then repeat again the whole practice, but since that fateful day I no longer install any rom, the device must always be in bootloop, it only works gingerbread, why what has happened?
Inviato dal mio GT-I8190 con Tapatalk 2
ponemania82 said:
I have installed several times the rom on galaxy w, always with a good result, but one day when riavviai normally my phone with above cm10, went into bootloop for no reason, at this point ripristinai everything and re-installing gingerbread, then repeat again the whole practice, but since that fateful day I no longer install any rom, the device must always be in bootloop, it only works gingerbread, why what has happened?
Inviato dal mio GT-I8190 con Tapatalk 2
Click to expand...
Click to collapse
You probably clear the /system after you flashed the rom. Or you didn't flash the rom at all.
Sent from my MB860 using Tapatalk 2
iDelta said:
You probably clear the /system after you flashed the rom. Or you didn't flash the rom at all.
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
no, do not do anything like that, I do the procedure I've always done, delete data, delete cache, delete davil cache, flash rom and gapps
Inviato dal mio GT-I8190 con Tapatalk 2
ponemania82 said:
no, do not do anything like that, I do the procedure I've always done, delete data, delete cache, delete davil cache, flash rom and gapps
Inviato dal mio GT-I8190 con Tapatalk 2
Click to expand...
Click to collapse
That's weird...
Sent from my MB860 using Tapatalk 2
ponemania82 said:
no, do not do anything like that, I do the procedure I've always done, delete data, delete cache, delete davil cache, flash rom and gapps
Inviato dal mio GT-I8190 con Tapatalk 2
Click to expand...
Click to collapse
Try factory reset after flash and see if that helps.
Sent through time and space from my s3mini/CM10.1
tys0n said:
Try factory reset after flash and see if that helps.
Sent through time and space from my s3mini/CM10.1
Click to expand...
Click to collapse
I've already tried, without success, please help me!
Inviato dal mio GT-I8190 con Tapatalk 2
ponemania82 said:
I've already tried, without success, please help me!
Inviato dal mio GT-I8190 con Tapatalk 2
Click to expand...
Click to collapse
Ok :/ I can't really figure out what's wrong. It sounds strange that everything work fine on stock, but bootloops when flashing CM.
Have you tried any other custom rom to see if it's the same problem?
tys0n said:
Ok :/ I can't really figure out what's wrong. It sounds strange that everything work fine on stock, but bootloops when flashing CM.
Have you tried any other custom rom to see if it's the same problem?
Click to expand...
Click to collapse
you've tried both the cm10, and also the cm10.1, my recovery if they can help is the cwm 6.0.2.7
Inviato dal mio GT-I8190 con Tapatalk 2
tys0n said:
Ok :/ I can't really figure out what's wrong. It sounds strange that everything work fine on stock, but bootloops when flashing CM.
Have you tried any other custom rom to see if it's the same problem?
Click to expand...
Click to collapse
Dude, can you check if your CM is legit? Like could it be a bad download?
Sent from my MB860 using Tapatalk 2
Have you try to fix permission?
or try to flash stock rom via odin , root ,cwm 6.0.3.8 then flash cm 9 EOL
Redwraith96 said:
Have you try to fix permission?
or try to flash stock rom via odin , root ,cwm 6.0.3.8 then flash cm 9 EOL
Click to expand...
Click to collapse
Fix permissions will not work. It does not do anything, but its a waste if time. In the updated recoveries, it has been removed because its just a placebo.
Sent from my MB860 using Tapatalk 2
iDelta said:
Fix permissions will not work. It does not do anything, but its a waste if time. In the updated recoveries, it has been removed because its just a placebo.
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
ok thanks I didn't know that so when I have to flash roms I haven't to do always fix permission..
Redwraith96 said:
ok thanks I didn't know that so when I have to flash roms I haven't to do always fix permission..
Click to expand...
Click to collapse
Yep, you save a lot of time.
Sent from my MB860 using Tapatalk 2
Now i try slimbean,but nothing
Inviato dal mio GT-I8150 con Tapatalk 2

Wipe cache dalvin

Hi, i have a twrp, stock rom and elementalx as kernel, if i go un the recovery, i cant wipe cache and dalvin, the recovery says that unable to mount, how can i fix?
Thanks for you helping
Inviato dal mio Nexus 5X utilizzando Tapatalk
ideaman924 said:
Dalvik is part of data, which means you will need to mount them. To mount encrypted
EDIT: data partitions,
you need TWRP 3.0.0 or later.
Although if the latest version of TWRP fails to mount, you have a bad partition there and you'll have to wipe it anyway.
나의 Nexus 5X 의 Tapatalk에서 보냄
Click to expand...
Click to collapse
how can i fix it? i have last twrp 3.0.0 , where must i go on recovery ?
I fix the problem, at the start foto the recovery tell me that i insert a password, i doni know the password was the pin of startbooteof the Phone, with that password all work perfectly
Inviato dal mio Nexus 5X utilizzando Tapatalk
ideaman924 said:
Click Mount, then click Decrypt Data, and then enter your passcode that you would use to open your phone.
If this fails, then you have a corrupt partition and your only solution is to wipe the data partition completely.
Click to expand...
Click to collapse
Right, the problem was that
Inviato dal mio Nexus 5X utilizzando Tapatalk

Wipe System?

I have a question that I have not been able to solve yet. Can wipe system be done in the Mi Max 3? I want to do a clean reinstallation of the rom Revolution OS and I do not dare to do the wipe system.
Yes, you can wipe /system.
Good luck......
Inviato dal mio MI MAX 3 utilizzando Tapatalk
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
If you wipe system, for sure you have hard.brick
Inviato dal mio MI MAX 3 utilizzando Tapatalk
Well I have not left doubts. 50% hard brick - 50% yes I can.
tuddu said:
Good luck......
Inviato dal mio MI MAX 3 utilizzando Tapatalk
---------- Post added at 02:48 PM ---------- Previous post was at 02:48 PM ----------
If you wipe system, for sure you have hard.brick
Inviato dal mio MI MAX 3 utilizzando Tapatalk
Click to expand...
Click to collapse
Why would he be hard bricked by wiping system before flashing another ROM?
Because folder System is mandatory to be fount by flashing operations. If not fount, the flashing operations stops and result into bootloop. In other words new ROM must find system in order to overwrite some files only, while it keeps unchanged other ones. If he doesn't find any file (folder system cancelled) it is clear that some ROM parts are missing and return a bootloop.
Inviato dal mio S8 utilizzando Tapatalk
tuddu said:
Because folder System is mandatory to be fount by flashing operations. If not fount, the flashing operations stops and result into bootloop. In other words new ROM must find system in order to overwrite some files only, while it keeps unchanged other ones. If he doesn't find any file (folder system cancelled) it is clear that some ROM parts are missing and return a bootloop.
Inviato dal mio S8 utilizzando Tapatalk
Click to expand...
Click to collapse
Agreed. Wiping system is pointless for the OP. Just do factory reset (wipe data, cache, and dalvik cache) if you want to do a clean install. Keep it simple. :highfive:
Where is the Revolution OS for the Mi Max 3?
omniphil said:
Where is the Revolution OS for the Mi Max 3?
Click to expand...
Click to collapse
https://miui.revtechs.me/en/mimax3/
opasha said:
https://miui.revtechs.me/en/mimax3/
Click to expand...
Click to collapse
Excellent, thank you!
The developers say that they format the system:
https://imgur.com/a/604sLzJ
fendetestasxx said:
The developers say that they format the system:
https://imgur.com/a/604sLzJ
Click to expand...
Click to collapse
That's just text from their text file. Ignore that. What they could be referring to is modifying system. Just listen to our advice - no need to format it.
opasha said:
That's just text from their text file. Ignore that. What they could be referring to is modifying system. Just listen to our advice - no need to format it.
Click to expand...
Click to collapse
Okay. No wipe system. I'll stay with the desire.
What all of you fail to understand is that the rom edify script itself wipes your system partition anyway...
Yet you guys claim it would brick the system... Which is nonsense.
Even if you wiped the system partition, the recovery would still be unaffected, which means you could just install a ROM of choice to revive the phone.
MrColdbird said:
What all of you fail to understand is that the rom edify script itself wipes your system partition anyway...
Yet you guys claim it would brick the system... Which is nonsense.
Even if you wiped the system partition, the recovery would still be unaffected, which means you could just install a ROM of choice to revive the phone.
Click to expand...
Click to collapse
You're absolutely right. I will correct myself because the rom above was wiping the system anyway; any good full rom does as you mentioned regarding the rom script.
However, let's say he didn't make a backup, his download of the rom was corrupted, or this was just an incremental update, then he might run into errors. I've come across many flashing too fast without reading and doing things incorrectly, and they end up with bricked devices. It's better leaving the OS alone and let the update script of the rom take care of it. Simple factory reset (wipe data, cache and dalvik cache) is usually enough.

Categories

Resources