Develop Bugs

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible

wondering if anyone can help me...

frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.

pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged

frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.

Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.

i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen

same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks

A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!

Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia

same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.

If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.

This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.

I highly doubt they even CARE when sending these in. They will void for physical damage most likely.

tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

CM10.2 Galaxy S3 (i747) Soft bricked?

Hello Everyone,
I have a rogers Galaxy S3 I747M that I have been running with Cyanogenmod for 6 months. A few weeks ago I used the CM desktop loader to load CM10.2 on my phone and it was working fine. Yesterday my phone told me there was a CM update so I downloaded it and it seemed to be working but glitchy.
This morning my phone reset itself and now when I turn it on it just goes to the samsung screen and shuts off. I can't get into recovery or download mode.
Do I need a Jtag? Should I pay $100 to a local shop to do it.
Do I need to buy a USB jig? How do I use it if I buy one from ebay?
Thank you

Does the phone power up at all? Do you have access to a USB jig to try?

audit13 said:
Does the phone power up at all? Do you have access to a USB jig to try?
Click to expand...
Click to collapse
The phone powers up for only a second. I can't get into recovery. I can get to download screen but it shuts off in 2 seconds.
USB jig cannot keep in download mode either, phone shuts off.
I don't think it is a power button short because its not looping and my power button or USB ports have given me no issues. CM hasn;t give me issues either until today, after some random update yesterday. It kept telling me to download/update the software and I did. and it worked all night and then just restarted this morning and is not dead

Same issue
I'm facing the same issue too.
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert, it vibrates, the LED comes on and the Samsung screen comes on for a second and then the phone turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
Can anyone help us with this issue?

fatestkid said:
Hello Everyone,
I have a rogers Galaxy S3 I747M that I have been running with Cyanogenmod for 6 months. A few weeks ago I used the CM desktop loader to load CM10.2 on my phone and it was working fine. Yesterday my phone told me there was a CM update so I downloaded it and it seemed to be working but glitchy.
This morning my phone reset itself and now when I turn it on it just goes to the samsung screen and shuts off. I can't get into recovery or download mode.
Do I need a Jtag? Should I pay $100 to a local shop to do it.
Do I need to buy a USB jig? How do I use it if I buy one from ebay?
Thank you
Click to expand...
Click to collapse
I HAD THE SAME ISSUE!!!!!!
Phone is running fine, 30 minutes later it's dead. I pull the battery, put it back in, it vibrates, turns on, and turns off quickly.
Do this:
Pull out battery for 1 minute.
Put the battery in and DON'T touch it at all.
Does it vibrate? Then turn on by itself?
It should show Samsung Logo quickly, then the start of the CM boot menu.
If so, you've got a bad power button. I had the same issue. Only thing to do is replace the power button.
I got mine fixed here: http://brickedmyphone.com/
The guys name is Joe, and he probably will confirm the same thing I said. He will also trouble shoot it with you when you said him an email.
TL;DR: I doubt you're bricked, most probably bad power button.

ChinDaChin said:
I HAD THE SAME ISSUE!!!!!!
Phone is running fine, 30 minutes later it's dead. I pull the battery, put it back in, it vibrates, turns on, and turns off quickly.
Do this:
Pull out battery for 1 minute.
Put the battery in and DON'T touch it at all.
Does it vibrate? Then turn on by itself?
It should show Samsung Logo quickly, then the start of the CM boot menu.
If so, you've got a bad power button. I had the same issue. Only thing to do is replace the power button.
I got mine fixed here: http://brickedmyphone.com/
The guys name is Joe, and he probably will confirm the same thing I said. He will also trouble shoot it with you when you said him an email.
TL;DR: I doubt you're bricked, most probably bad power button.
Click to expand...
Click to collapse
That is correct...( This is Joe ) sounds like a bad power switch

[Q] ATT LG3 Won't Turn On Completely Unresponsive

I have an ATT LG G3 yesterday it the phone suddenly won't turn on. It was on with mostly full battery and now won't turn on and is competley unresponsive. When I plug it in, no charging light comes on. Additionally I tried the hard reset by holding down power and down volume key; this gave me nothing.
Thinking that it might be a battery problem, I left it plugged in all night. But still nothing.
Any ideas?

Had the same problem
cajer said:
I have an ATT LG G3 yesterday it the phone suddenly won't turn on. It was on with mostly full battery and now won't turn on and is competley unresponsive. When I plug it in, no charging light comes on. Additionally I tried the hard reset by holding down power and down volume key; this gave me nothing.
Thinking that it might be a battery problem, I left it plugged in all night. But still nothing.
Any ideas?
Click to expand...
Click to collapse
I had the same problem yesterday. It kept playing the boot tone every 2-3 mins but the display and buttons were dead. I removed the battery and reinserted it. Voila. It works

srivas95 said:
I had the same problem yesterday. It kept playing the boot tone every 2-3 mins but the display and buttons were dead. I removed the battery and reinserted it. Voila. It works
Click to expand...
Click to collapse
I tried that and it didn't work. My phone gives no response without even a boot tone

HEEELP!
cajer said:
I have an ATT LG G3 yesterday it the phone suddenly won't turn on. It was on with mostly full battery and now won't turn on and is competley unresponsive. When I plug it in, no charging light comes on. Additionally I tried the hard reset by holding down power and down volume key; this gave me nothing.
Thinking that it might be a battery problem, I left it plugged in all night. But still nothing.
Any ideas?
Click to expand...
Click to collapse
I have the same problem..have you found a solution aside from bringing the phone to the service center? I would appreciate your help.
Thanks!

solution
ladyashiree said:
I have the same problem..have you found a solution aside from bringing the phone to the service center? I would appreciate your help.
Thanks!
Click to expand...
Click to collapse
I had the same problem and pulling the battery wasn't cutting it. This worked for me:
1. Take out the battery
2. WITH THE BATTERY OUT OF THE PHONE AND NOT PLUGGED IN, press and hold the power button for about 15 seconds.
What this does is it drains all the power stored in the phone and takes the power source away so the phone can fully reboot and refresh the power cycle.
3. Replace he battery and plug in the phone to the OEM LG Charger that came with the phone.
4. Let the phone charge for about 15 minutes then try to turn it on.
This worked for me but some phones are DOA being the phones are still in early production. It takes a few months before they work out all the Kinks.

I figured I'd add my two cents. I had the same issue with my D851 (T-Mobile) version. I was copying a file over my from computer and halfway through the phone shut off. I thought the screen timed out, but it wouldn't turn back on. I pulled the battery, tried holding the power button without the battery for 60 seconds, putting the battery back in, charging without the battery... nothing. The LED would never light, and the phone would never turn on. I contacted LG and it's currently on its way back to them for replacement.

I work for a wireless service provider and not only sell this phone but own one. I also had the problem and unfortunately the battery out power combo did not work for me either and swapping the battery was to no avail. I have seen one other DOA as well. I have noticed the new LG models have had some significant flaws and lemons when they've first come out but I feel the specs and price you get are worth the risk so if this does happen to you I wouldn't throw in the towel on LG quite yet. However the way LG reacts to this will speak volumes to the company's overall success in the industry.

motoxmadman said:
I had the same problem and pulling the battery wasn't cutting it. This worked for me:
1. Take out the battery
2. WITH THE BATTERY OUT OF THE PHONE AND NOT PLUGGED IN, press and hold the power button for about 15 seconds.
What this does is it drains all the power stored in the phone and takes the power source away so the phone can fully reboot and refresh the power cycle.
3. Replace he battery and plug in the phone to the OEM LG Charger that came with the phone.
4. Let the phone charge for about 15 minutes then try to turn it on.
This worked for me but some phones are DOA being the phones are still in early production. It takes a few months before they work out all the Kinks.
Click to expand...
Click to collapse
I've tried this, and worked for me just now, but when i try to turn it on, it happens the same thing, wont turn on at all, no lights or anything.
Is this a abttery issue?

Heeelllppppp
So last night I let my battery on my ATT LG L3 VIGOR die out like an idiot but when i plugged it in to charge it would show that its at 0% then try and turn on but right when the boot up starts, it freezes and becomes completely unresponsive -_- I don`t know what to dooooo :[

people who are having booting problem with their lg g3 at&t can try this to solve it
https://www.youtube.com/watch?v=7gLenUZPWvs

Hey! This is happening to mine right now! Did you ever figure out a solution? I really would loveeee to know if you did! Thanks!
---------- Post added at 11:45 PM ---------- Previous post was at 11:39 PM ----------
DerpTheBuddy said:
So last night I let my battery on my ATT LG L3 VIGOR die out like an idiot but when i plugged it in to charge it would show that its at 0% then try and turn on but right when the boot up starts, it freezes and becomes completely unresponsive -_- I don`t know what to dooooo :[
Click to expand...
Click to collapse
Did you figure somethingg out? This just happened to mine!

Montana15 said:
Hey! This is happening to mine right now! Did you ever figure out a solution? I really would loveeee to know if you did! Thanks!
---------- Post added at 11:45 PM ---------- Previous post was at 11:39 PM ----------
Did you figure somethingg out? This just happened to mine!
Click to expand...
Click to collapse
what would happen if I tried returning my phone with root and another rom on it and it won't turn on?
I tried manually going to twrp but went to recovery instead, restarted phone and now it won't turn on. I've tried the suggestions in this thread to no avail.

Won't turn on
My LG G3 D855 first had this problem of restarting on its own when I play with its camera and while restarting, the phone is getting warmer. And now, it wont turn on. I press the power button while it is off, it tried to turn on until the LG logo screen and then it shuts down on its own and restarting non-stop until that LG logo screen and turning off again. When I plugged in a charger, it manages to turn on but only to the pass code part and then it turns off again and the battery charging screen when phone is turn off, is displayed. The battery showed was higher than the battery showed when during the pass code stage. Is it the battery problem? I haven't send the phone to be check yet, I hope its the battery..

Clearing phone
My won't turn on either. I filed an insurance claim and am getting a new one. But I have to send my old phone in. I was wondering how I can get all my info off of the old phone before I turn it in. I don't want some one to get my info that is on that phone. How do I clear it all with it not turning on. Is there a hard drive from the phone I can remove?

yes for i have solution if u want to turn on your phone ...
First put phone on charging and then turn it on after 10sec (dont remove from chargning ) when its completelty on ... then remove from charger ...

naeembabakheil said:
yes for i have solution if u want to turn on your phone ...
First put phone on charging and then turn it on after 10sec (dont remove from chargning ) when its completelty on ... then remove from charger ...
Click to expand...
Click to collapse
The plan: Put the phone into recovery and then push " power on".
The method: To get into recovery, push power and volume down together until you see "system recovery" ( it will take a while- maybe more than a minute) and touch "continue power up" by depressing the power key.

Miilliiee said:
The plan: Put the phone into recovery and then push " power on".
The method: To get into recovery, push power and volume down together until you see "system recovery" ( it will take a while- maybe more than a minute) and touch "continue power up" by depressing the power key.
Click to expand...
Click to collapse
h! i have rooted my G3 and insatll TWRP it works .. but when i press volume down+power button it wont boot to recovery. ? i can easilt boot to recovery using ADB .. but how can i boot to recvery using power and voulme keys ..

http://lgg3root.com/lg-g3-root-tutorials/how-to-manually-boot-into-cwmtwrp-recovery-on-lg-g3/ Said better than I can. Be sure that you are firmly pressing both on the power and volume down keys, at the same time, don't give up- To be sure I have constant pressure, I take off the case. I do this each time I restart the phone.

Oh awesome. I was browsing the web having the same problem and this totally fixed it for me. Cheers!

motoxmadman said:
I had the same problem and pulling the battery wasn't cutting it. This worked for me:
1. Take out the battery
2. WITH THE BATTERY OUT OF THE PHONE AND NOT PLUGGED IN, press and hold the power button for about 15 seconds.
What this does is it drains all the power stored in the phone and takes the power source away so the phone can fully reboot and refresh the power cycle.
3. Replace he battery and plug in the phone.
Click to expand...
Click to collapse
Just wanted to say this worked for me. Thanks.

[Q] battery drained, Desire EYE wont charge and/or turn ON

Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome

come on, no one? damn, im blind while waiting for the freaking chinnese screen replacemente... since i cant do crap... i started a wall charger for 4 days, lets see if this turns on at least the red light, which by the moment it doesnt... will keep updating this thread regarding the status and situation in the couple of days.

i'm having the same problem right now with my HTC desire and i just bought it in July brand new from AT&T. I was wondering if it ever turned back on for you?

csa1234 said:
Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome
Click to expand...
Click to collapse
Was kind of in the same boat as you. Bought my EYE with a broken digitizer.. upon receiving it I found out that the phone wouldn't charge or turn on.. I had to replace the battery myself and now it works like a charm.!
Sent from my HTC Desire EYE using Tapatalk

battery replacement
Would you be able to fix mine because I've have tried everything and it still won't turn on please help

techsavi said:
Would you be able to fix mine because I've have tried everything and it still won't turn on please help
Click to expand...
Click to collapse
Check for dust or other dirt in your charging port, then use a toothpick to get it out, this fixed it for me.

Bumping because I have a similar issue and don't want to make a new thread.
My screen is fine, but the LED is off, plugging it in does nothing, and it wont turn on. Worked fine last night, it was in low power mode (on CM 14), I shut it off and plugged it in. Now, the next day, it's dead.

Model G3223 - Charging Issues and Black Screen/Flashing White Light at Boot

Hey everyone,
So, I got a new Xperia XA1 Ultra (G3223) through a trade running stock Android 7.0. Checked everything and initially it looked fine.
Over the last few days, things have been acting weird. Every time I start the device, it gives me a blank (black) screen with a blinking white notification light - it doesn't even show me the boot screen at times when it boots. Just yesterday, I got it to boot by pressing VOLUME UP + POWER after being in that state - but, that's not normal. Does anyone know why in the world my phone does that?
Furthermore, when using the Sony charger that came with the device, it takes over 6 hours to charge and doesn't even show the charging sign while charging. Could this be an Android 7.0 bug or is something seriously wrong with my phone? Only one time since I got it, did I get it to charge normal with the charging sign and everything; it actually charged quite rapidly at that point.
Any help would be appreciated with this, guys, because I'm at a loss. I do want to mention that the device doesn't seem to be recognized by the computer, so I'm not even sure that the cable is original.

vince.lupe said:
Furthermore, when using the Sony charger that came with the device, it takes over 6 hours to charge and doesn't even show the charging sign while charging. Could this be an Android 7.0 bug or is something seriously wrong with my phone? Only one time since I got it, did I get it to charge normal with the charging sign and everything; it actually charged quite rapidly at that point.
Any help would be appreciated with this, guys, because I'm at a loss. I do want to mention that the device doesn't seem to be recognized by the computer, so I'm not even sure that the cable is original.
Click to expand...
Click to collapse
Try a new cable and/or charger. (I found I had a bad charger once)
Since you had computer issues, I'd start with the cable. Also check the charging port on the phone for debris/damage.

avg2424 said:
Try a new cable and/or charger./QUOTE]
Okay, I'll do that - but, do you have any idea regarding the blank screen issue, my friend?
Click to expand...
Click to collapse

vince.lupe said:
Okay, I'll do that - but, do you have any idea regarding the blank screen issue, my friend?
Click to expand...
Click to collapse
How is your phone turning on? Power button or inserting the USB cable?
Only thing I can think of is perhaps a stuck volume key placing the phone into recovery or flash mode.
Try turning on the phone with no USB cable attached. Before you turn it on, press the volume keys a few times to make sure they aren't stuck and then power on.

avg2424 said:
How is your phone turning on? Power button or inserting the USB cable?
Only thing I can think of is perhaps a stuck volume key placing the phone into recovery or flash mode.
Try turning on the phone with no USB cable attached. Before you turn it on, press the volume keys a few times to make sure they aren't stuck and then power on.
Click to expand...
Click to collapse
The thing is that it's weird.... For one, sometimes when I use the touch reset/turn off button, it takes at least two minutes to reset, or it doesn't even reset. Then, when I turn the phone on while it's off, the phone sometimes enters into this weird state with the flashing white notification light. I never power on the phone via USB cable, so I don't know, really. Yesterday, I shut the phone off to test it, plugged the phone in to charge it, it wouldn't charge while off, but then hit power on, and then it wouldn't turn on, so I used VOLUME UP + POWER, and then it turned on just fine.

Hi
Happened also to be with my older Xperia J.
Backup your phone (cause you'll lose your data), connect it to a PC (or Mac) and install Xperia companion, then select "repair phone" or something similar (I know the written in Italian version ).
Wait and it will be all fine.
Regards
Faby:highfive:
vince.lupe said:
The thing is that it's weird.... For one, sometimes when I use the touch reset/turn off button, it takes at least two minutes to reset, or it doesn't even reset. Then, when I turn the phone on while it's off, the phone sometimes enters into this weird state with the flashing white notification light. I never power on the phone via USB cable, so I don't know, really. Yesterday, I shut the phone off to test it, plugged the phone in to charge it, it wouldn't charge while off, but then hit power on, and then it wouldn't turn on, so I used VOLUME UP + POWER, and then it turned on just fine.
Click to expand...
Click to collapse

faby GT said:
Hi
Happened also to be with my older Xperia J.
Backup your phone (cause you'll lose your data), connect it to a PC (or Mac) and install Xperia companion, then select "repair phone" or something similar (I know the written in Italian version ).
Wait and it will be all fine.
Regards
Faby:highfive:
Click to expand...
Click to collapse
Okay, let me see if I can get it to connect to the computer, and then I'll let you know if I have progress.

I have the same slow charging problem on my xperia xa1 ultra. you could solve it?