Develop Bugs

Need help restoring to stock without using microusb

Today while I had my phone connected to my computer I heard some popping noises and smelled burning plastic. Apparently this has happened to other Galaxy nexus's. So I have my phone insured through Verizon. I can get a free phone if the malfunction is hardware failure but costs money otherwise. My phone still functions other than not being able to use the microusb. I'm trying to restore it to stock so I can bring it in and get a replacement handset.
All of the methods I've seen in my searching for restoring to stock require usb connection. I'm trying to find someway to restore my phone using clockworkmod. I can't find any stock android zip files out there to install via cwm. Anyone have any idea of a way I can restore it to stock without using the usb connection?

assuming you have root, you can do this: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro

Zepius said:
assuming you have root, you can do this: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Click to expand...
Click to collapse
Do you think copying in the individual image files and overwriting them in a nandroid backup I have and then do an advanced restore for each of the images work?
Sent from my Nexus 7 using Tapatalk HD

There are stock cwm zips in the development section.
Edit: here's a link for a rom, it's deodexed, and otherwise stock, but VZW will never figure that out:
http://forum.xda-developers.com/showthread.php?t=2176954

cschmitt said:
There are stock cwm zips in the development section.
Click to expand...
Click to collapse
Can you point me in their direction? I've been looking around and haven't found anything.
Sent from my Nexus 7 using Tapatalk HD

If you have all of the files you need on your computer, you can use apps such as tappin or WiFi_ftp to put them on the phone wirelessly. I don't know the mechanisms to apply them once they are on the phone, but at least you can get them on the phone without the USB. On mine, the USB connector broke so I have to use ftp or tappin to move files to and from the phone, and charge the battery outside of the phone. Too bad Samsung never produced a pogo-capable product.

TCL P600 / Alcatel One Touch Snap 7025D Root and GAPPS

Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.

I tried what you say but no thing happened .
I have alcatel one touch snap

Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?

internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega

Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day

I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk

hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english

weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported

Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:

Hi all.
Is possible to port or create any custom rom for this device?
Thanks

Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.

root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper

angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...

please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.

I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.

Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????

EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards

jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.

EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?

jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.

[Q] I need help extremely bad!! Please!

I am a class A bonehead. I had an insane amount of data on my internal sd card and before confirming I had twrp backups (swore I did) I deleted everything(internal, external, you name it). My Sprint GS3 now has no OS and no data whatsoever, I have no back ups and am really up Poop's creek with no paddle. I have downloaded stock rooted md4 rom and thought I'd be okay because I can still go into download mode but Odin 3.07 will not recognize my phone when I connect to usb....this might be because I forgot to check "usb tethering" before this all happened but I'm sure I have been able to connect before the OS was deleted and the drivers are fine. Please tell me there is a fix for this as I'm hoping I'm not the only one to pull this numbskull move!

In twrp, have you tried mounting your sdcard as usb storage to.your computer?

CNexus said:
In twrp, have you tried mounting your sdcard as usb storage to.your computer?
Click to expand...
Click to collapse
As he said. After that flash a stock rom. That may help =p
and in my opinion, always store your Nandroid backup on your computer.. Your phone isn't the best place if it's the victim.

I once used Undelete for Root Users to save someone's files. But that was awhile ago. Also if you absolutely have to you can use THIS method. It does not require ODIN. It will put you back to Stock, so you will have to Root once again. But you will be up and running.

prboy1969 said:
I once used Undelete for Root Users to save someone's files. But that was awhile ago. Also if you absolutely have to you can use THIS method. It does not require ODIN. It will put you back to Stock, so you will have to Root once again. But you will be up and running.
Click to expand...
Click to collapse
OP's main problem was that he didn't know of a way to copy files over to the phone. Hopefully, CNexus' solution will work for him.

topherk said:
OP's main problem was that he didn't know of a way to copy files over to the phone. Hopefully, CNexus' solution will work for him.
Click to expand...
Click to collapse
Thank you. I understood the issue. I offered an alternate solution. In case the first one does not work.
TEAM MiK
MikROMs Since 3/13/11

Based on how I read this, he is only able to get to download mode ATM. But... the problem is that his PC will not recognize the device in download mode. My recommendation is that you:
1. Re-install the drivers
2. Use a different USB cable
3. Try the USB cable in a different USB port
From download mode (and after the drivers have been re-installed), connect the device - at which point it will say that it is detecting and installing the drivers that you just installed.
After drivers are finished installing, unplug it again.
Then run ODIN.
Then plug the phone back in.
Then install a factory ROM.
Then re-root with your toolkit.
PROFIT.

gprorecovery.apk

Where can it be found?

Found and installed. Now just have to figure how to get into recovery?

edekalil said:
Found and installed. Now just have to figure how to get into recovery?
Click to expand...
Click to collapse
1) If you have ADB, connect, allow adb and adb reboot recovery
2) Hardware key combo: Volume Up & Power until LG screen appears, then Volume Down twice, then Power (yeah, looks like game cheat code but it really works)

I thought I had the drivers loaded because I could see my phone in explorer but I must not have the drivers loaded.now how can I find the adb drivers and how do I set them up? Every time I think I am getting somewhere I get thrown way back again. All I want to do at this time is reload the firmware so I can access the ext sd card witch was lost while trying to root and install cwm. I am about to throw this **** aginest the wall wall that way this will be fixed for good.

Use LGUnifiedDriver, it should install both adb and LG drivers

Where can I get a clean download of it? I am running windows 8.1 . I do have a pc with windows xp as well just havent used it in a while.

LG's support site I think, I still use old version, from first time I've flashed something via LGFlashTools.. You can download that and LG Support Tool from there too.

I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it in device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).

edekalil said:
I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it ino device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).
Click to expand...
Click to collapse
That sounds like Windows problem more. You don't have any of those all-in-one driver packs for Android devices installed? How did you root it?

Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.

edekalil said:
Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.
Click to expand...
Click to collapse
Return it back to Jellybean if possible, use old Jellybean root metod available in the forums, install Freegee and flash TWRP from there, and later update it to newer TWRP on forums. Freegee is a step you can't avoid because it's the only way we can unlock our phones (that I know), and their TWRP doesn't support SDCard (not sure about CWM, but I think it also had that problem, it was long time ago I've used it). E980 can get a bit shady, but it's a great phone, so don't lose your patience yet.

Thanks for the info. I belive I have the drivers installed now, I can see the phone in the device manager of windows and it looks to be good. I will keep you informed as to how it go's.

Sent from my LG-E980 using XDA Free mobile app

Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.

edekalil said:
Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.
Click to expand...
Click to collapse
You're welcome, I'm glad I've helped.
About Philz recovery, I think you have full info on it's thread. If you need some more help, I'm around somewhere

Thanks again.

Nexus 7 2013 FLO for use in car. Need Lineage OS, Kernal advice, Gapps info.

Hello all,
I've been seeing similar threads about the N7 being used for car use here and other places, but there are enough differences in what I saw, or the software was outdated or the computer they were using (I'm on a Mac) or bad mirrors in downloads that I get confused and stuck and stop trying for a while. If I can get ALL of the instructions that are the most current in light of what software is available with fresh links, I think I'll be set.
Background: Recently purchased an '04 Mazda RX-8 with a very dated GPS nav screen that pops up when you turn the car on. I purchased the N7 to go in this slot since it has a lot more features I would like to have like Torque and the ability to play music from Pandora or Spotify from my phones' hotspot, and it should be able to just barely fit with the charge cable and headphone jack output connected. I would like to eventually have mine permanently installed here. I have found enough videos to feel comfortable with the wiring of this. I have a bluetooth adapter for Mazda's in case the analog cable doesn't fit/work, a USB hub and 3amp charger all ordered.
I currently am rooted and on stock 4.3 with Kernel 3.4.0-g1f57c39 Build JWR66N I have TWRP installed on my device
Where I'm stuck at and need help is the uploading of the correct (subjective term) Lineage ROM for what I'm using this for AND the correct Kernal (that I think has to match the ROM?), which is using the OTG cable to charge, and have the option to pull music off an SD card connected to a USB hub. I understand I'll need Elementalx to go with a compatible ROM? I plan on getting some sort of car themed launcher so that I would use the launcher screen every time I hop in the car and start it. I would like the tablet to go into power saving mode when power is removed from the OTG cable. I have also seen installs using a magnet in the dash so that when the tablet goes down, it shuts off the screen (also triggering power saving mode?) Many users were using TIMUR's Kernel, which I understand to be unsupported and outdated.
I see other threads with older versions like 14.1 of L OS using the kernal that supports OTG charging. Do I need to have an older version of Lineage or can I use the 17.X version? Whatever makes the tablet stable and consumes the least amount of power when in standby would be ideal. What Gapps configuration should I use? Can I download all of this on the tablet and flash from there using TWRP? I've been out of the Android scene for a while and a lot has changed. Just need some coaching on what the steps will be to get the right versions of these flashed without bricking my N7! Thanks for your help!
PS: Sorry about the images. They wouldn't orient correctly.

nathanthepilot said:
I've been seeing similar threads about the N7 being used for car use here and other places, but there are enough differences in what I saw.......
I currently am rooted and on stock 4.3 with Kernel 3.4.0-g1f57c39 Build JWR66N I have TWRP installed on my deviceWhere I'm stuck at and need help is the uploading of the correct (subjective term) Lineage ROM for what I'm using this for AND the correct Kernal (that I think has to match the ROM?), which is using the OTG cable to charge...............
Click to expand...
Click to collapse
I guess you are referring to the currently active thread on the subject. I propose that you settle on LOS14.1 and follow these steps:
get LOS14.1
get gapps (select ARM 7.1 pico)
get ElementalX-N7-6.17
get addonsu-14.1-arm-signed.zip //optional - if you want root
boot TWRP
copy LOS, addonsu, gapps and EX to N7
in TWRP do standard 'Wipe' THEN install LOS, THEN addonsu, THEN gapps
in TWRP install EX and preset "doubletap2wake", "Battery life extender" and "USB OTG + charge mode"
That's it. Have a nice ride :fingers-crossed:

k23m said:
I guess you are referring to the currently active thread on the subject. I propose that you settle on LOS14.1 and follow these steps:
get LOS14.1
get gapps (select ARM 7.1 pico)
get ElementalX-N7-6.17
get addonsu-14.1-arm-signed.zip //optional - if you want root
boot TWRP
copy LOS, addonsu, gapps and EX to N7
in TWRP do standard 'Wipe' THEN install LOS, THEN addonsu, THEN gapps
in TWRP install EX and preset "doubletap2wake", "Battery life extender" and "USB OTG + charge mode"
That's it. Have a nice ride :fingers-crossed:
Click to expand...
Click to collapse
Thank you for the reply and information, K23m! I have all of the files downloaded onto my Mac, have transferred them to the N7 via Android File Transfer and got LOS to install. I'm in the middle of getting all of the other elements to install and I'll report back if there are any troubles. Thanks again for the quick, and on-point reply. This is all I needed! :good::highfive:

nathanthepilot said:
Thank you for the reply and information, K23m! I have all of the files downloaded onto my Mac, have transferred them to the N7 via Android File Transfer and got LOS to install. I'm in the middle of getting all of the other elements to install and I'll report back if there are any troubles. Thanks again for the quick, and on-point reply. This is all I needed! :good::highfive:
Click to expand...
Click to collapse
Well, after I got LOS installed, I was unable to get the root zip installed. I got "Zip signature verification failed!" and it wouldn't install. Also not able to install Googleapps for the same reason. I think maybe the files didn't transfer properly. I can't get USB debugging to work on LOS with my Android File Transfer App on the Mac. I'll have to do some research. I think I need to re-download or re-transfer the files to the N7 to get them to load properly. Very limited on what I can do with no Play store or USB debugging. I'll try again in the morning.

Update: I was able to download the files directly onto the tablet and get them installed. Play store works. Thanks again for the help! I think I just didn't transfer the files correctly. I selected all of them and dragged them to the N7. I think that caused a problem with the files. Anyway, a download from the N7 itself worked. Cheers!

k23m said:
I guess you are referring to the currently active thread on the subject. I propose that you settle on LOS14.1 and follow these steps:
get LOS14.1
get gapps (select ARM 7.1 pico)
get ElementalX-N7-6.17
get addonsu-14.1-arm-signed.zip //optional - if you want root
boot TWRP
copy LOS, addonsu, gapps and EX to N7
in TWRP do standard 'Wipe' THEN install LOS, THEN addonsu, THEN gapps
in TWRP install EX and preset "doubletap2wake", "Battery life extender" and "USB OTG + charge mode"
That's it. Have a nice ride :fingers-crossed:
Click to expand...
Click to collapse
Thanks for this. I have been using my nexus 7 in my vehicle for years, but it needed a refresh. I followed this and worked perfect.

I did the same but instead of addonsu I installed Magisk. And now when I try to install ElementalX-N7-6.17 I got a "Zip signature verification failed!". I have downloaded it again. The md5 sum is also correct. How can I fix that?

k23m said:
get LOS14.1
get gapps (select ARM 7.1 pico)
get ElementalX-N7-6.17
Click to expand...
Click to collapse
I am wondering if the usb issues with elementalx were corrected since my last test with a flo tablet lineageos 14.1 and elementalx as i mentioned earlier here:
https://forum.xda-developers.com/showpost.php?p=74291365&postcount=6042