Related
Hey guys, i am creating a guide to unbrick redmi 1s with only 10 MB AND ADB TOOLS
So guys,
1st. Download twrp for redmi 1s [.IMG]
2nd. Opern adb folder and paste it there and rename it to recovery
3rd. Boot redmi 1s into fastboot mode [if you are getting red blink then charge it for sometime for about 1hr] [or your charger problem ]
4th. [On pc] open adb folder and keep pressing shift button and select open cammond promot or whatelese here.
5th. Type, [fastboot flash recovery recovery.IMG]
6th. If it showed time like 0.2, .5 sec then you have successfully flashed recovery if not then the problem is, you have not installed redmi 1s USB driver
7th. For those who don't have USB driver can download the driver using the miui forum or Google:fingers-crossed:
8th. For those who sucessfully flashed can press volume up and power button then you will be in recovery where you can flash you favourite ROM:laugh:
Press thanks button if I helped:laugh
Been saved by this from sgs2 days ....
Thanks, happy to help you
ADB not detecting the device
I have a similar situation but the phone is not recognised by adb tools. although i can reach the recovery mode and fastboot mode. any solution?
HI..
i first tried to root my asus Zenfone 2 .. installed a custom rom 12.1 for cynogen mod and first there was no network for sim .. then somehow fixing all this i wiped out my data without backup in recovery mode .. and when i tried to install the stock rom .., my phone is giving error message whenever i enter recovery mode.
(also i have tried hard reset like volume up +power button when in theres a error message in recovey mode ) It doesnt work for me or maybe i am not doing it the right way.
Basically i think its BRICKED +an error message in recovery mode .
Will it ever work again ?also please tell me how to get my phone work ..will be really greatful .
Please HELP !
How to Enter "Recovery Mode" on Asus Zenfone 2
Turn Off your Zenfone 2
Hold Power button + Volume up
When the phone is vibrating release the Power button
Then the Display change like this
You can select "Normal Boot" or "Recovery Mode" by pressing Volume Up/Down, to enter Recovery choose "Recovery Mode"
Then you will see sleep Android Robot, Press Power button and Volume up, after one second release the Volume up
You will see Asus Zenfone 2 Recovery Mode
after that follow these steps and BOOM BAM !! I DID IT
Download and Install ADB and drivers on your PC.
Download the latest Stock ROM from the Asus website by visiting the following links. If your device got bricked after a recent OTA software update, wait a few days while Asus uploads the latest Stock ROM. On the page below, select Android as the OS and then expand the Firmware section. For non WW devices, please check your regional Asus website for the download details.
Zenfone ZE551ML Stock ROM
Zenfone ZE550ML Stock ROM
Copy the downloaded Stock ROM to the folder where you installed ADB (Generally C://adb)
In power off state, press and hold the Volume Up key and then press and hold the Power Key till the phone vibrates. Release the power key at vibration, but keep pressing the Volume Up key. Wait for the phone to boot into fastboot mode.
In the fastboot mode, keep pressing the Volume Down key till you see Recovery Mode. Press Power Key to select it.
In recovery mode, select Apply update from ADB.
Connect your phone to the PC and open the ADB folder. Right click while holding down the shift key and choose Open command window here.
Pass the following command in ADB. Replace file.zip with the name of Stock ROM zip (eg: UL-Z00A-WW-2.19.40.22-user.zip) downloaded in step 2.
adb sideload file.zip
Wait for the process to complete as it will take a couple of minutes.
Reboot the phone when it is all done and hopefully your Zenfone 2 will be boot up fine, alive and working again.
no recovery menu - phone restarts everytime i try to enter recovery
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
then, i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery menu the phone restarts and goes to fastboot menu.
please help.
dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
then, i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery menu the phone restarts and goes to fastboot menu.
please help.
Click to expand...
Click to collapse
Does the zenfone2 have a fastboot mode to flash the firmware manually because flashing Ota updates bricks if you never unrooted you phone. So you should just flash the firmware you were already on then unroot then flash the Ota update
DROID_4_UsEr said:
Does the zenfone2 have a fastboot mode to flash the firmware manually because flashing Ota updates bricks if you never unrooted you phone. So you should just flash the firmware you were already on then unroot then flash the Ota update
Click to expand...
Click to collapse
adb is not able to detect my phone. is there any other way to flash the phone ?
and i am just a bit curious to know if its possible to directly flash the phone with CM12.1 without having to go through all those steps (installing the older version and unrooting and installing the OTA) ?
---------- Post added at 05:14 PM ---------- Previous post was at 05:01 PM ----------
and how can i flash the original rom when adb doesn't detect my phone ??
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Why when I download ozip I always get different md5 checksum? I tried different download manager and I always get different md5 checksum. Anyone has a mirror of any ozip file?
doesn't install stock recovery
When i install stock recovery and reboot to recovery it doesnt show anything and boot to system .That's why i cant install stock rom .i intsalled stock image too but get stuck on realme logo .But if i install twrp it works fine . Device rmx1825 . current rom:aosp gsi(buggy buggy buggy)
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
Click to expand...
Click to collapse
Please help !! My RMX1821 still cant boot to stock recovery after i flash the stock recovery.img. Please Helpp !!!
my device not booting into fastboot mode.. others is ok
phone is not going in to recovery mode
my device is in infinity boot loop mode. it was on everything stock mode.
right now i cant even boot into recovery mode or fastboot mode.
plz help me guys.
Problem regarding realme 3
Problem regarding realme 3 as my device is showing error of charging overtime and telling to contact realme. It happened when I relocked the bootloader, as I unlocked my bootloader yesterday and today I tried to root it using magisk_patched.img file and it showed error and therefore I relocked my bootloader and after that it showed the problem. And I added the ozip file in sd card and tried to recover it using color os recovery using install from storage device, but there from sd card option is not showing and I am not able to use my mobile phone and its urgent, please help me.
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Click to expand...
Click to collapse
Parmardada said:
my device is in infinity boot loop mode. it was on everything stock mode.
right now i cant even boot into recovery mode or fastboot mode.
plz help me guys.
Click to expand...
Click to collapse
this also happen on my realme 3, do you found the solution yet?
I'm desperate to fix mine.
MNaikSwalayan said:
this also happen on my realme 3, do you found the solution yet?
I'm desperate to fix mine.
Click to expand...
Click to collapse
this happens to my realme 3 pro too.. any help?
anyone got the solution i am also stuck not connecting to pc not going into fastboot too
i need help
my device have unlocked bootloader
and flashing custom recovery but only 1 time to enter recovery ,, after that recovery has gone...
and i receive notifacation for update so i'm download the update .. but went something wrong with update ,,,
i stuck at logo with infity bootloop,, it say recovery mode which is disappear it self ,, and i cannot go to fastboot mode to reboot system,,,
what should i do?
najam489 said:
anyone got the solution i am also stuck not connecting to pc not going into fastboot too
Click to expand...
Click to collapse
please let me know I you find the solution
no recovery mode
question sir, it possible to fix if realme recovery mode can't access or not contenuing to boot on recovery mode? do u have any way to flash a rom even without recovery mode?
thanks for reply ?
Were all the same problems facing rightnow. I recently flash the stock recovery and it turn to endless bootloop. Does one of us already fix the issue ? I can't boot to fastboot.
Theres only one left chance of reviving damage of phone software. JTAG is the best option . But JTAG is expensive. Better go to nearest cellphone shop and pay their fees.
Realme 3 bootloop. Can't turn off, Recovery mode, Fastboot.
My device RMX 1821...(RUI C.16)
After flash custome Rom Bliss device is good...
But i have problem after flashing magisk my device bootloop on logo...i try to reboot recovery cant be acess ...
Just come to fastboot mode.
Try to install again the recovery "error' cant load partition ,
I try to flashing by Realme flash tool ...
Error' with Cant load system' image ( getvar variable not found)
Any solution please for my phone....
Very kindly to be help me...
charlis88 said:
My device RMX 1821...(RUI C.16)
After flash custome Rom Bliss device is good...
But i have problem after flashing magisk my device bootloop on logo...i try to reboot recovery cant be acess ...
Just come to fastboot mode.
Try to install again the recovery "error' cant load partition ,
I try to flashing by Realme flash tool ...
Error' with Cant load system' image ( getvar variable not found)
Any solution please for my phone....
Very kindly to be help me...
Click to expand...
Click to collapse
Me also
fawazahmed0 said:
Steps to recover from bootloop or soft brick
Method 1:
1. Download and paste the ozip file for realme 3 to sd card from here:
https://www.realme.com/in/support/software-update
2. Insert SD card in your soft bricked phone
3. Power off your phone by pressing power button for sometime
4.
a. If you have stock recovery then do this step:
Press power button + vol down, it should boot into recovery. If it boots into fastboot mode, you have to do:
fastboot oem reboot-recovery (to boot into recovery).
or
b. If you have TWRP or no recovery at all, then do this step:
Press power button + vol down to boot into fastboot mode.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode and now flash stock recovery using:
fastboot flash recovery recovery.img
fastboot oem reboot-recovery
5. Flash the ozip file in sd card using stock recovery and after that wipe the data (full)
6. Reboot
Method 2:
1. Boot to fastboot by powering off your device and then pressing power button + vol down.
If it's in endless bootloop, Hold vol up + power till the screen becomes blank, now release the button immediately, now press power + vol down to boot to fastboot mode
2. Commands to execute:
fastboot -w
fastboot erase para
3. Boot to TWRP by:
fastboot oem reboot-recovery
if you don't have twrp, get it from here: https://forum.xda-developers.com/realme-3/development/screen-doesnt-twrp-realme-3-t3944022
4. Restore the TWRP backup ,except preloader_a and preloader_b partitions and reboot
Links:
Stock recovery : https://www.androidfilehost.com/?fid=1395089523397966781 (extract using 7zip and flash recovery.img using above commands)
ADB Installer tool: https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Click to expand...
Click to collapse
my realme 3 pro devise is stucked in twrp and bootloader after i flashed a wrong rom and after flashing the corrext rom also , its stucked..pls help
Can anyone give the link of recovery.img because in stock rom which i downloaded there isn't any recovery.img please help...... My stock rom is up to date
Evening guys, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our smartphone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder... just create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
Code:
fastboot devices
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Code:
a6ghfxfv6 fastboot
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
Code:
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
When you're done, restart the phone with:
Code:
fastboot reboot
Congratulations, you have your RMN8Pro fixed.
klurosu said:
Evening, let's fix the Bootloop of our RMN8Pro if we have installed a menu Recovery TWRP faulty/unsuitable or we have installed a ROM that does not belong to our phone.
This method is valid for China to global or Global to global.
NOT FOR INDIAN (sorry about that)
You'll need:
ADB files
Fastboot ROM V10.4.5.0.PGGEUXM
Download both files and unzip them in C:/ADB (if you don't have that folder...create it)
You will need to rename the file extension of the file <<begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.0000_9.0_eea_f796762f8a.tgz>> from .tgz to .rar
Let's go!!
Turn the phone off, turn it on in fastboot mode (by pressing both POWER and VOL- ) and connect the phone to the PC with its USB cable.
Open a CMD command console (in administrator mode) in C:/ADB and type this (press enter when finished typing):
If you have the drivers installed and everything goes well, a series of alphanumeric characters will appear, such as for example:
Perfect, we can go on.
Next we will flash one by one the files needed to revive the phone.
Write the following lines and press enter at the end of each of them (wait for the files to be installed between line and line):
When you're done, restart the phone with:
Congratulations, you have your RMN8Pro fixed.
Click to expand...
Click to collapse
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?
polfrank said:
So, this is basically a guide of how to flash the images through fastboot, right? Why not just use MiFlash when we are in fastboot mode?
Click to expand...
Click to collapse
Because it doesn't work???
Don't believe me?, Just try
send from an RMN8 Pro (xiaomi.eu custom rom)
Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.
idog8818 said:
Miflash will work if in fastboot and have an MI account had requested to unlock BL.
Don't believe me? You try.
Click to expand...
Click to collapse
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
You still need authorized account Sherlock.
(Omg this guys...)
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?
idog8818 said:
if you don't apply for the Mi account to unlock BL, how will you able to flash anything? Only 2 mins for a new account.....What the problem will be?
Click to expand...
Click to collapse
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
Read again (this time read well please) 2 posts above
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
Read again but didn't get it. What do you mean ....
idog8818 said:
Read again but didn't get it. What do you mean ....
Click to expand...
Click to collapse
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
That you still need an Authorized Xiaomi's Account to do that with the old method dude.
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
What do you mean by Authorized Xiaomi's Account?? As far as I know, there're 2 types of Mi accounts we commonly talk here.
1. Normal Mi account: used to unlock BL and this can be used in miflash to flash rom, I've tried 100 times in fastboot, and works every time. I registered this account I guess 5 years ago when I need to request unlock BL on note 3 . As I said above, it needs 2 mins to register.
2. Authorised service account: This is not we can easy to register, It's for Mi service center or developers for repair/develop purposes. If no rec, no recovery, blank screen, it can be recovered by SP flash tool, which will need this type of account. This is also why users in following post looking for unbricking.
[GUIDE] [begonia] UNBRICK - stuck on DA mode / Authorised Service Account required
https://forum.xda-developers.com/re...a-mode-authorised-t4000433/page7#post81175069
---------- Post added at 01:20 AM ---------- Previous post was at 01:17 AM ----------
I can prove this by my bricked redmi note 8 pro.
I used my mi account to unlock BL, flashed global rom, but I cannot use it in SP FLASH TOOL to restore because my MI account is not an Authorised Service Account
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
At the moment you only can do a deep flashing in EDL mode, and need an authorized account... You need to contact someone with this type of account and flash... ( And give some money...)
nutellamarco said:
Hello,
I have a nex Redmi Note 8 pro, I unlocked it after I use Ifixit.. to install twrp, the phone was in bootloap, after I tried to flash with fastboot commands. Now the phone is off and I have a black screeen. I can't power it on (vol + or -) does not work. power on no more. It is not recognized with miunlock. No fastboot nor recovery. Please help me how I can do?
Click to expand...
Click to collapse
Some people are saying they managed to bring to life a phone without rocovery without fastboot mode.search and maybe you find a way. As i remember they said with phone turned off you press volume - and power and you have about 5 seconds to flash. I don't know more details.i wish you success
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
as far as I know spflash tool should be ready to flash,. it means with all the files selected, the combination is keeping vol+ and connect the USB cable to PC port, I recommend you search in Google about flashing mediatek devices... Good luck
Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.
Click to expand...
Click to collapse
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).
Aglik-x said:
Literally this guide is really about just how to flash with fastboot instead of Mi Flash(tool which can use anyone with Xiaomi Phone - doesn't require Authorized Service ACC)
I had this problem at the weekend(Stuck at EDL mode - tried to flash with SP tool but without success(needed service acc - brom error)), you can use SP flash tool with authorized service acc - fastest way, maybe there will be some cracked security file in the future as one for redmi 6. Or do battery trick. You are stick at EDL mode and cannot reboot from it. You can wait to discharge your phone(Tooks ~2 day with pushed power button) then connect into computer and when the led turn less bright use vol - + power to get into fastboot or disconnect battery and reconnect with pushed vol - to get into fastboot(I have used this three times because of installing wrong recovery).
Click to expand...
Click to collapse
Thanks a lot for your reply
I will do that. But How I can know that phone is on to discharge battery? Best regards
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse
petenoni said:
nutellamarco said:
hello
thanks for your ideas, I can't enter in fastboot mode nor recovery. The screeen is black. When I tried with spflash, when I push together vol+ and vol- i hear a noise, but nothing happens with spflash.
I am trying. I think it is loosed.[/QUOTE
My oneplus 6 I used to do kind of the same thing... With the phone plugged and everything ready to flash... I used to press - plus power button and it would starting the process..
Click to expand...
Click to collapse
I try this method, the spflash does not start
I tried all touche combinaisons.
I will wait until the battery were empty and try again.
Thanks for your reply
Click to expand...
Click to collapse
bootloop fix worked for me
I try to post this yesterday but nothing happened so what i did was...
i installed TWRP and in twrp i wipe all data , system, vendor and reboot phone. that was wrong and i stuck in bootloop. so i go back to fastboot and type commands as u say....
fastboot boot boot.img
fastboot flash system.img
fastboot flash vendor.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img - nothing worked
maybe u forgot some commands.... so i use...
fastboot boot boot.img -dont use, it didnt work
fastboot flash system system.img -ok
fastboot flash vendor vendor.img -ok
fastboot flash cust cust.img -ok
fastboot flash recovery recovery.img - but instead of official recovery i used TWRP.img and after reboot a finally boot into TWRP and i flash xiaomi.eu rom and after reboot magisk and all works fine. im not developer but this method worked for me and excuse my english i have global device
After unlocking the bootloader in my Realme 3 Android 10, How can I enter in recovery mode?? I have tested all button combinations Just showing me 1 line "Fastboot Unlock verify Ok. Please Help.
And I have flashed realme 3 compatible spartan twrp also
ninoroy said:
After unlocking the bootloader in my Realme 3 Android 10, How can I enter in recovery mode?? I have tested all button combinations Just showing me 1 line "Fastboot Unlock verify Ok. Please Help.
And I have flashed realme 3 compatible spartan twrp also
Click to expand...
Click to collapse
I m having the same problem twrp is not flashing in my realme 3 .. i tried orange fox too but nothing happened... The screen freezes on transferring......did u solved it ?
Yes bro i also please find any solution
You can try volume down+ power button...if it is not working...
Make sure you installed it properly
The command to install recovery is
1."Fastboot flash recovery (img )"
(If u doubt it didn't install try reinstalling and if you already did then skip this)
2.after that type "Fastboot reboot recovery" this will boot your phone into recovery mode.
3.if you want to enter recovery mode again just press volume down + power button