dropped it and the screen broke into a million pieces (again, the gorilla glass is not particularly tough).
i'm considering trying to fix it myself, and found a screen replacement on a site called vifocal
does anyone know anything about the company, or have experience buying replacement screens like this?
thanks
A friend of mine bought in China through Ebay, a screen with the digitizer to World Tradin or something like that, it cost about $ 50.
We did the screen replacement following a guide in iFixit, it was for replace the motherboard, but you can us it and when you reach the screen, it is removed after taking off the plastic frame that holds it (with care, it's fragile ). Double sided tape is needed to attach the new screen.
In YouTube you can find a guide for the screen replacement for Find 5 which can be used for reference.
It is easier than it looks.
Good luck. :good:
Related
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
glass only video - hmmm...
exeq said:
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
Click to expand...
Click to collapse
the above is for the digitizer w/glass - the below is for glass ONLY
http://www.youtube.com/watch?v=CfuTVjI_Wao
It is very risky to replace the glass only. Doing it this way increases the risk of damaging the AMOLED panel, either by overheating it or scratched/cracked by the broken glass. I've explained it before; if you want to replace the glass only, you'll need to separate the screen assembly from the frame first, then separate the glass from the AMOLED panel. You might end up breaking the panel anyway, so might as well replace the whole thing. But you can give it a go. It should be possible to remove the glass while keeping the AMOLED panel in the frame, because the panel itself is very fragile.
I replaced only the glass on mine.
igor45 said:
the above is for the digitizer w/glass - the below is for glass ONLY
Click to expand...
Click to collapse
Hi. This is my story about SUCCESSFULLY replacing only the glass of s2.
Background, you can skip this:
Few months ago I broken the glass of my beloved S2 in an accident, but because I had a screen protector the pieces of glass were kept together and the phone was 100% usable, only the image was distorted because of broken glass.
So I searched the available options: replace the whole display for a price of more than 100euro. Buy a defect s2 with good screen, but didn't found any lower than the previous price.
I had a previous experience with an Ipod Touch with the same problem, when I ordered the glass from ebay and went to a local phone repair shop that destroyed the Ipod. It was usable before going to that shop.
So I decided to give it a try and try to change it myself. I'm a programmer with what can be called poor electronic and hardware skills. So if I was able to do it, and you were able to find this post, you can replace it too. But after seeing some videos I had more confidence on my skills than of those repair specialists that were not careful with the other device.
First I found a clip on youtube about why you CAN'T change only the glass on S2. But I found also the above video with a interesting method, but it required a Molybdenum string that I couldn't found at a good price. Actually I believe that the shipment to Romania made the price to high for the string.
After researching I found the SOLUTION: on a page or youtube clip about how to remove the broken glass. But I've lost the link. Anyway, the procedure was simple. I remember that the video was about replacing the glass on a Galaxy S3.
So I ordered the replacement glass and some adhesive (finally not used) from ebay.
After I got the replacement parts, I opened the phone, you can find somewhere online the instructions how to do it.
For removal I used a pack of plastic poker card. It's needed something to not be to hard to scratch the digitizer, but hard enough to remove the broken pieces of glass.
I started removing the pieces around the Home button to get a feel of the process, and proceeded to remove all the pieces of glass and glue. It took around 3 hours to finish it and 48 cards. You need to lift the broken pieces with great attention and patience. It's not a hard job, but it takes time. Maybe with a hot gun is easier to remove, but when I received the replacement I was anxious to start and did not wait to procure one. During the whole process I kept the phone started to be sure that I did not broke the screen. In case of possible breakage or of a bad scratch I thought that I don't need to continue the procedure. Maybe is not recommended to keep it running, but it gave me a positive feedback that everything is ok.
After removing all the pieces of glass and glue I was able to see some fine scratches with a black background. I used some dust removing solution and then I attached the new glass. I only fitted the new glass on the place and I believe there were some glue left on edges that keep it in place because I did not added any other glue and it did not moved until now. With the new glass the scratches from the digitizer are not visible at all. And the phone works as new, the touchscreen was not damaged at all.
So it's completely possible to replace it.
Before fitting the new glass the cleaned touchscreen was like the touchscreen on S4: it was only needed to hoover with a finger at some distance above, but not touching . I remember that the replacement of my glass was before the release of S4 and when I found about this feature I knew that I already had something like this on my S2.
I don't remember having any other difficulties during the replacement except the removal of broken glasses. And I used this phone continuously without problems since.
Only last night the phone stopped charging and I had to replace the charging port, flex ribbon; but it was not related to glass replacement.
I don't remember if it was needed to open the phone for glass replacement because I opened it when it broke to inspect it and I opened it also few time since then for various tasks.
The total price of replacement parts was below 10$, with glass, screen protector and adhesive ordered from ebay. I ordered also a case to protect the edges for future dropping and was a smart investment. The pack of cards I had from poker set, but It shouldn't be so expensive.
Success with your replacement.
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2
buffon95 said:
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Click to expand...
Click to collapse
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2 top quality with best price !
http://www.xkxfilm.com/en/samsung/40-41.html: :good:laugh:
Don't try this at home kids...
I now back to my desire z after the galaxy screen is toast. JUST the heating alone destroyed it. ... Now gonna buy the LCD/screen assembly and do it right.
Sent from my Desire Z using xda app-developers app
if you are not a technician, I suggest you give it to someone REALLY capable of, what do you mean it is not at all easy and the risk of doing damage is very high.
Otherwise follow the advice that was given to you, buy the whole block
Necro thread, but I agree, it is not worth doing so. In order to be done properly, you need to have a very thin wire to separate the two pieces. Not something i would do myself. Much better to replace the whole assembly instead.
Relevant
test
Hi everyone,
First, I hope there's not another thread opened about this, I promise I did several searches and couldn't find one that was close enough
I have some question about screen replacement.
My dad just dropped his note 2 and damaged the screen (really unfortunate, it was really a little drop!), so I was looking into buying a screen from eBay and replace it myself. yes, it's tricky, but not all that much imo (big +1 to the guy from the YT channel LE55ONS, his videos about this kind of stuff are amazingly well done).
So, the screen is broken, the display is not, but if I bring the phone to the rapair guy he will almost certainly replace the screen and the display for €200+
If I buy something like this
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
and replace it myself I can do the whole thing and spend some €50 tops.
I was thinking about this one
http://www.ebay.com/itm/Gray-Front-O...item3a7dc376c5
Here come the questions. Can anyone point me towards a good screen replacement for something around $20/30? Is the quality good? I asked the seller if it is actually gorilla glass 2 and he said yes.
Also, these don't have any connectors, the original one has 2. I can always use the connectors from the old screen, but if someone knows about a screen with connectors included, can they please let me know? There's nothing like asking to someone who has already done something like what I'm about to do.
Thank you everyone
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.
rickyvee said:
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.
Click to expand...
Click to collapse
If you buy the digitizer with the screen attached that's sooo much easier to replace, it's almost not even risky. But it costs somewhere around $200, the same as having it repaired by a professionist. Did you find a cheaper replacement?
Just had someone bring me a Galaxy Note 2 to repair and they bought the replacement part off ebay. However all they have got is just a front piece of glass with no digitizer attached, is this correct? Normally im used to front screens having the digitizer attached or is it easy to detach from the broken old screen
Is there a guide anywhere for this?
There's a few threads on this around, but as far as I know, you need to use a heat gun to remove the glue on the digitizer.
Sent from my GT-N7100 using Tapatalk 2
Neo1607 said:
Just had someone bring me a Galaxy Note 2 to repair and they bought the replacement part off ebay. However all they have got is just a front piece of glass with no digitizer attached, is this correct? Normally im used to front screens having the digitizer attached or is it easy to detach from the broken old screen
Is there a guide anywhere for this?
Click to expand...
Click to collapse
no way mate. don't bother to anything with that cheapo. glass is always attached to the digitizer. they bought the cheapest thing they found.
i have found over the years that saving some money is not the best choice in comparison to user experience or other arising problems.
http://parts4mobiles.com/acatalog/S...-Lcd-Screen-with-Digitizer-GH97-14112A-1.html
this is cheaper than ebay which they ask for 166 pounds
Yeah, heat gun will melt the adhesive enough to separate the lcd. But its a very, very difficult process that will more likely than not end up with a damaged lcd or poor reseal.
Sent from my GT-N7100 using Tapatalk 2
mariosraptor is right. Glass is always sold with digitizer (it is one item). I haven't heard about clean glass without capacitive layer. You can buy either digitizer glass or complete digitizer glass with factory glued LCD module. This one's more expensive, but you have less work with replacing.
Anyway: buying only digitizer glass for this kind of phones (Note 2, S3, iPhone 4<, newer HTCs...) is waste of time and nerves. It is nearly impossible to separate LCD from digitizer. Buying complete set of digitizer & LCD is the best what you can do for your phone.
Yeah i didn't think the glass came seperate from the digitizer, i have repaired over 400 iphones and have done about 20 galaxy s2 and s3's and never have i seen just the piece of glass without a digitizer on it, i will tell the woman she needs a whole new screen, i think she did go for the cheapest option
This is actually what she ordered:
http://www.ebay.co.uk/itm/New-Gray-...s=63&clkid=5413496726471672632&_qi=RTM1319883
It obviously doesn't have flex, so it is only pure glass. I don't understand, why would any serious seller offer this kind of items.
I cracked my screen a while back and every time I look at it I get sad. Now recently I found on YouTube that it actually seems fairly simple to replace your screen yourself. I'm just wondering if anyone else has replaced their own and has any tips before I order the parts.
You can replace just the glass but the correct way to do it is replace the complete digitizer glass set. There is a special adhesive film which bonds the digitizer to the glass and you can never duplicate it as if you where doing the complete set up.
You will notice it more when using your device in the sun, the screen will be very difficult to see
Have a great day!
Dont do the glass only fix. Spend the extra money and get the front half of the phone and re-mount everything to it.
atleast they've dropped in price a bit, use to be a 250 dollar fix, now its around 150.
Just make sure youre getting the one thats compatible with Sprint. Theres a slightly almost unnoticeable size difference between verizon/att/sprint models and sprint motherboards will not fit in to att/vzw frames. IDK Why they did this.
Have a pro do it. I learned that back on my iPhone 3g and buy OEM not a eBay knock off that breaks easier.
Hello there, I've had this phone for about a good year now. However, back in January, I broke the screen. The touch does not work (except for one corner) and the screen is very badly cracked. I looked online for digitizers +LCD's, and I found a lot to choose from. I heard that its best to get one with the frame in tact, which I cannot find. My question is, How would replacing the screen work? How do you put the ribbons back together if you pry them off? (wifi antenna as well.) I would love to use this phone as my main one again, I am currently using a Huawei Ascend Mate 2. Its a good phone, but I loved my Find 7a. Any help would be greatly appreciated.
A friend of mine bought in China through Ebay, a screen with the digitizer to World Tradin or something like that, it cost about $ 50.
We did the screen replacement following a guide in iFixit, it was for replace the motherboard, but you can us it and when you reach the screen, it is removed after taking off the plastic frame that holds it (with care, it's fragile ). Double sided tape is needed to attach the new screen.
In YouTube you can find a guide for the screen replacement for Find 5 which can be used for reference.
It is easier than it looks.
Good luck. :good: