Develop Bugs

How to Replace your Scratched Galaxy S2 Screen DIY

I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!

thanks for the write up, do you have any more photos of your process?

OMG, it's like watching an autopsy.

Could a better resolution screen or even 3d screen be used/upgraded later on?

Nice to know for something happens, Hope not

Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.

Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.

On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App

wow that is the definition of T H I N !!!!!

Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site

psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.

I wonder how these replacement parts compare to the quality of the original parts.

Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?

psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.

It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.

BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL

Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB

DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.

I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance

buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB

[Q] Screen replacement

Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!

wangasore said:
Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!
Click to expand...
Click to collapse
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).

Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
How hard was it to do a replacement on the screen glass itself? and is it easy to do a bezel replacement?

Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!

wangasore said:
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!
Click to expand...
Click to collapse
I purchased the glass off of ebay, I cant post a link due to not having enough post here, but just search "galaxy note 2 replacement glass"
I looked at a bunch of Galaxy S3 glass replacement videos. just search "s3 glass replacement" on youtube.
It is time consuming, I used a hair dryer to be safe because heat guns get too hot if not careful.
I did get a chance to test if the 11pin still pushed video to a tv with a broken screen (using an MHL adapter). It did not for me. I plugged a phone in with a broken digitizer that the s pen still worked on and would let me make calls from. The phone is still function able, just no picture on the screen (working in the dark with the s-pen). Nothing showed up on the tv screen. I plugged another note 2 in to verify and the other note 2 pushed video just fine.

What's the easiest way to tell if I just need to replace the glass versus the entire digitizer?

Glass replacement
Ok for every thread on the internet the digitizer is NOT part of the glass. The glass is just that......glass. Stop calling it a digitizer these are not iPhones!!!!!! The digitizer is laid on top of the amoled and has a connector that runs under the display and plugs in there with a flip type switch connector. The glass can be removed with heat approx. 160 deg with a heat gun on low and keeping track of the temp with a infrared thermo. I've done this a few times now be careful with white as these tend to break easier than the grey not sure why laminate must be weaker. Takes 45mins to do. You can buy the glass for approx. $25 shipped be careful near the bottom with the button flex they are glued on. You must reuse your speaker trim and button trim also. I have only 1 single question can you buy a replacement digitizer by itself without having to buy the amoled? Anyone know and how much they are please point me to one for the i317m.

Why the are you answering a 3 month old thread?

Op says he dropped his screen...lol
Sent from my SAMSUNG-SGH-I317 using xda premium

Better late than never. ...imho...lol

[Q] Shattered glass

So, I shattered the glass on my Galaxy S3 today. It's pretty messed up (see the attached picture), but the touch works, even in the damaged areas. So it seems it's only the glass that needs to be replaced, with something like this:
http://www.ebay.co.uk/itm/Blue-Fron...K_Replacement_Parts_Tools&hash=item417515ee67
Correct?

Yep, goodluck. Replaced the same on my Galaxy Note 2. all good now.

Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.

1slow4G said:
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
Click to expand...
Click to collapse
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.

MadsBen said:
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
Click to expand...
Click to collapse
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2

Actually the glass on an s3 is just that, glass. The digitizer is fused together with the LCD. However glass is glued to the LCD which can make it very difficult to replace. If you've never taken on the repair of a screen before then I would say you'll be more likely to break the LCD than not in your replacement of the glass. But again it is possible if you are very slow and very careful. As someone else mentioned though it's much easier to replace the whole assembly.

It didn't went well. I wasn't too carefull. In the bottom, the glass was too shattered, so when I tried to lift it, a piece with glue got stock and lifted the digitizer. So now that don't work. I'm not gonna spend £100-120 on a new digitizer, I'm gonna settle for my good old Nokia 6300i (and Nexus 7...) and wait for the Nexus 5.

I would wait for the n5.. gs3 is a dying trend already.

Its hard like everyone said , if your really gunna do it watch videos online and be prepared. If you know anyone that has done it successfully ask for help or tips
ouch didnt see u tried it already

the same happened to me on my wife's white sgs3 trying to be the savior of the day turned out to be an expensive digitizer replacement of $200 instead of the $8 glass replacement. I rushed the glass removal and cracked the lcd screen. I could have ordered one on ebay for $100 but wife needs the phone the next day so i decided to get it repaired locally.

Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.

My 2 cents
bidibull14 said:
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
Click to expand...
Click to collapse
Wanted to warn that changing the glass is not for everyone. It takes patience and zen. If you rush it, you will likely break LCD and spend even more $$$ that you would have otherwise. Also following notes:
1. Watch at least a couple of youtube videos before starting.
2. Heavy duty heat blower works much better than a hair dryer. Of course, don't go crazy, as it's possible to melt the phone with it
3. S III has a wire at the bottom (the one which goes to the buttons). If you damage it, you will need to replace whole LCD, there is [almost] no chance you will be able to fix this wire. So, always start removing glass starting with the top of the phone
4. Heavily cracked glass is hard to remove, as it crumbles. To make it easier, a) put a scotch tape on top of glass, so that the small pieces stick to it, and b) use a lot of heat
5. Everybody advises to use plastic tools, personally I used swiss army knife with high level of success, and never had a problem scratching LCD. Your mileage may vary, but using metal blade certainly makes life much easier, especially in heavily cracked glass situation.
6. If you do use blade, it often is enough to get blade just a little bit under a glass, and then simply apply heat. Big chunks will unglue all by themselves.
7. Remember, that failure is always an option. Don't use it on the phone, if you know that you desperately need it working right this day, if you don't have a plan B.

1slow4G said:
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Click to expand...
Click to collapse
same freezing issue on mine... apparently the hardness of Gorilla2 is much greater than the knockoff glass replacements. The replacement glass on ebay and kijiji may not be authentic and that is why it bends slightly when pressed harder (in fact mine cracked completely when I applied too much pressure)

i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?

hani93 said:
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
Click to expand...
Click to collapse
I've heard about that glue too. I'm considering switching mine, because when I repaired I reused the glue of the original glass, and know I had dust between the glass and the lcd -.-
My concern is about the uv light, don't know if we could put in the sun to substitute it.

I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.

m1batt1 said:
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
Click to expand...
Click to collapse
it's not that hard to remove factory gle there..
for example, i removed mine, by rolling the glue with fingers.
just make sure, that you don't apply too much pressure to lcd.
and after that, clean up lcd form dust/fingerprints, and you are good to go.
and for removing glass, i used usual/ stronger kitchen knife (attached picture).

i replaced my glass 3 months ago.
i use normal hair dryer to remove glass and glass comes out almost as whole except for small broken pieces.
i think my scratch guard help in that.
i didnt use any additional glue or uv light.
nonresponsive screen is issue but only when you press too hard and press of power button resolve this issue.
but whole process of replacing galss took 2hrs

Should I replace touch screen digitizer alone (without LCD)?

I recently shattered the front glass on my Z1C. The display still works, but I get so many random ghost touches that it is unusable. Just wondering if anyone here has replaced the screen digitizer by itself rather than buying the digitizer + LCD screen together. Obviously it would be more difficult, however many posts about replacing both have mentioned the lower quality of the LCD image. Since my LCD still works, it would seem like a better option to use the stock one rather than a cheap knock-off. Not to mention it would be a little bit cheaper (I saw a kit which included glue, UV torch, tools, cleaner, and the digitizer for around $18 US). But on the other hand, with the added complexity comes additional risk that I will screw it up and end up worse off than just living with a duller display.
I’m still on the fence about which way to go here. Quality is subjective, so maybe I’m worrying over nothing and the new LCD would be good enough for me. I’d really appreciate your opinions.
Thanks!

Replace all.
I would suggest you to replace the LCD and digitizer completely. I broke mine in December last year. A small glass crack along the power button side made the top half of the digitizer stopped working. The LCD was fine though. I had to connect a wireless mouse to make a backup, copy some stuffs and use my old phone, while the replacement part came. Bought mine from Witrigs.com for $42 including front housing adhesive and shipping. Repairing was easy. Just heat the front part, lift it carefully. Swap the old part for the new one.
But like you I wanted to separate the glass digitizer from the LCD first. After several attempts removing the glue and the glass, the LCD had burnt spots. Maybe I applied a little too much heat in trying to remove the glass. And the broken glass left some permanent scratch marks on the LCD even after cleaning.
In all, trying to separate the LCD and glass has become very hard since last year. I've been repairing phones and tablets for years, mainly broken LCD or glass or both. From my experience, its better to change the whole part now.
Wish you good luck for the repair. Lets hope your phone lives again!!

same here. its very hard without professional stuff to change the display glass without damaging the touch under it. best way is to buy a new "complete" display module (glass, digitizer, touch) so that u only have to press the felx ribbon to ur phone. then using the glue stripes to fix it (using a hair dryer makes it easier to press it in).
Before the installation test the functionality

Hi there!
Can someone trustfully confirm, that witrigs.com is a good source for parts?

LCD screen: Is it two parts or one whole display

Hi, guys I have a question about the galaxy note 5 N920A. Is the display or should I say the digitizer screen is a two separate part?
My galaxy note 5 has a crack above and on top of the home button. the display and touch LCD works just fine without any kind of problems whatsoever. the only problem is that the crack seems to be spreading just like a crack windshield, which would soon look like a spider web. I would like to replace the crack plastic without changing the whole display screen:fingers-crossed:
I have check online for the display and to my dismayed the price is something I would like to ventured into. I also did further research and found quite a few which is describe as a panel screen for the display for only $10. So I am kind of confuse could this be also consider to be a tamper glass protector? Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.

bnrrcast said:
Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.
Click to expand...
Click to collapse
Hopefully you got your answer as its been a couple years since you asked, in case you didn't or anyone else thats curious about this, I recently replaced the screen on a Note 5, so have a bit of experience with it.
First to answer your question, a LCD screen and a tempered glass screen protector are 2 very different things. An screen is standard on every phone and is generally what you'd replace when your screen is cracked. On the other hand, a tempered glass screen protector is something you'd get and apply onto your phone's screen to protect it from hard drops onto the cement. They're quite effective depending on various factors but I definitely recommend them, if your screen is flat like the Note 5. Rounded edges screens like the S6 Edge thru S9, though tempered glass are available, reviews show they aren't nearly as effective, due to the "curved" wrap around edges, unfortunately.. Tempered glass screens have saved me a few times, after dropping my device, only the glass screen protector cracked, the phones LCD screen was undamaged. Tore off the cracked glass, $15 later, had a new on there. Small investment for the protection it gives, doubt a screen replacement will ever be around $15-20..
BTW, the Note 5s LCD screen is glass (Gorilla Glass 3, I think?) not plastic, as you mentioned..
Onto the bigger question, if you Google search "Note 5 teardown" you'll find quite a few tutorials w/ pics that breakdown the process, towards the end of them, after they've separated the LCD, you'll notice on back of it, there's a few small components, still attached. All of the teardowns, only mention the remaining removal difficulty is 5/5, the adhesive holding the screen much stronger than the LCD glass itself, though none have attempted the work..
Searching for LCD's on eBay, there's many listings of only the clear LCD glass, nothing else on back of it, which leads me to believe it is possible to do, but whoever attempts this may be the first and only one to have documented it.
If the pro's are semi-sketched from trying it, then, I'll trust their opinion, when replacing a friends Note 5 screen, we found a parts only device and did the swap, complete with all the little components on back.
I still have the rest of the parts, but it had water damage, so logic board is fried.
If anyone needs any other parts, PM me.