Develop Bugs

[Q] How to replace GLASS ONLY on i9100?

Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!

Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w

glass only video - hmmm...
exeq said:
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
Click to expand...
Click to collapse
the above is for the digitizer w/glass - the below is for glass ONLY
http://www.youtube.com/watch?v=CfuTVjI_Wao

It is very risky to replace the glass only. Doing it this way increases the risk of damaging the AMOLED panel, either by overheating it or scratched/cracked by the broken glass. I've explained it before; if you want to replace the glass only, you'll need to separate the screen assembly from the frame first, then separate the glass from the AMOLED panel. You might end up breaking the panel anyway, so might as well replace the whole thing. But you can give it a go. It should be possible to remove the glass while keeping the AMOLED panel in the frame, because the panel itself is very fragile.

I replaced only the glass on mine.
igor45 said:
the above is for the digitizer w/glass - the below is for glass ONLY
Click to expand...
Click to collapse
Hi. This is my story about SUCCESSFULLY replacing only the glass of s2.
Background, you can skip this:
Few months ago I broken the glass of my beloved S2 in an accident, but because I had a screen protector the pieces of glass were kept together and the phone was 100% usable, only the image was distorted because of broken glass.
So I searched the available options: replace the whole display for a price of more than 100euro. Buy a defect s2 with good screen, but didn't found any lower than the previous price.
I had a previous experience with an Ipod Touch with the same problem, when I ordered the glass from ebay and went to a local phone repair shop that destroyed the Ipod. It was usable before going to that shop.
So I decided to give it a try and try to change it myself. I'm a programmer with what can be called poor electronic and hardware skills. So if I was able to do it, and you were able to find this post, you can replace it too. But after seeing some videos I had more confidence on my skills than of those repair specialists that were not careful with the other device.
First I found a clip on youtube about why you CAN'T change only the glass on S2. But I found also the above video with a interesting method, but it required a Molybdenum string that I couldn't found at a good price. Actually I believe that the shipment to Romania made the price to high for the string.
After researching I found the SOLUTION: on a page or youtube clip about how to remove the broken glass. But I've lost the link. Anyway, the procedure was simple. I remember that the video was about replacing the glass on a Galaxy S3.
So I ordered the replacement glass and some adhesive (finally not used) from ebay.
After I got the replacement parts, I opened the phone, you can find somewhere online the instructions how to do it.
For removal I used a pack of plastic poker card. It's needed something to not be to hard to scratch the digitizer, but hard enough to remove the broken pieces of glass.
I started removing the pieces around the Home button to get a feel of the process, and proceeded to remove all the pieces of glass and glue. It took around 3 hours to finish it and 48 cards. You need to lift the broken pieces with great attention and patience. It's not a hard job, but it takes time. Maybe with a hot gun is easier to remove, but when I received the replacement I was anxious to start and did not wait to procure one. During the whole process I kept the phone started to be sure that I did not broke the screen. In case of possible breakage or of a bad scratch I thought that I don't need to continue the procedure. Maybe is not recommended to keep it running, but it gave me a positive feedback that everything is ok.
After removing all the pieces of glass and glue I was able to see some fine scratches with a black background. I used some dust removing solution and then I attached the new glass. I only fitted the new glass on the place and I believe there were some glue left on edges that keep it in place because I did not added any other glue and it did not moved until now. With the new glass the scratches from the digitizer are not visible at all. And the phone works as new, the touchscreen was not damaged at all.
So it's completely possible to replace it.
Before fitting the new glass the cleaned touchscreen was like the touchscreen on S4: it was only needed to hoover with a finger at some distance above, but not touching . I remember that the replacement of my glass was before the release of S4 and when I found about this feature I knew that I already had something like this on my S2.
I don't remember having any other difficulties during the replacement except the removal of broken glasses. And I used this phone continuously without problems since.
Only last night the phone stopped charging and I had to replace the charging port, flex ribbon; but it was not related to glass replacement.
I don't remember if it was needed to open the phone for glass replacement because I opened it when it broke to inspect it and I opened it also few time since then for various tasks.
The total price of replacement parts was below 10$, with glass, screen protector and adhesive ordered from ebay. I ordered also a case to protect the edges for future dropping and was a smart investment. The pack of cards I had from poker set, but It shouldn't be so expensive.
Success with your replacement.

KAWIN tempered glass screen protector for SAMSUNG GALAXY S2
buffon95 said:
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Click to expand...
Click to collapse
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2 top quality with best price !
http://www.xkxfilm.com/en/samsung/40-41.html: :good:laugh:

Don't try this at home kids...
I now back to my desire z after the galaxy screen is toast. JUST the heating alone destroyed it. ... Now gonna buy the LCD/screen assembly and do it right.
Sent from my Desire Z using xda app-developers app

if you are not a technician, I suggest you give it to someone REALLY capable of, what do you mean it is not at all easy and the risk of doing damage is very high.
Otherwise follow the advice that was given to you, buy the whole block

Necro thread, but I agree, it is not worth doing so. In order to be done properly, you need to have a very thin wire to separate the two pieces. Not something i would do myself. Much better to replace the whole assembly instead.

Relevant

test

HTC One V Screen replacement

I had broken my One V's Display Glass screen a month ago, the HTC authorized service center informed that the LCD as well as the display glass screen has to be replaced even though just the screen is damaged, the LCD is fine. They said that the replacement part comes bundled with LCD and the glass screen. The cost of replacement will come to Rs.5000 (~100$)
I searched ebay and found replacement glass screens available for as low as 20$.
Should I buy the replacement screen available on ebay? I have no experience in cell phone repairs and this will be risky.

sparxone said:
I had broken my One V's Display Glass screen a month ago, the HTC authorized service center informed that the LCD as well as the display glass screen has to be replaced even though just the screen is damaged, the LCD is fine. They said that the replacement part comes bundled with LCD and the glass screen. The cost of replacement will come to Rs.5000 (~100$)
I searched ebay and found replacement glass screens available for as low as 20$.
Should I buy the replacement screen available on ebay? I have no experience in cell phone repairs and this will be risky.
Click to expand...
Click to collapse
IF you have no experience i suggest you go to the service centre as you COULD damage your phone further more...

Isn't the One V's LCD fused to the glass and inseparable? Those Ebay sellers are probably misleading you.
If you want to try anyway, you should have a look at http://www.youtube.com/watch?v=w96ldQq5Q2k to see what's involved.
This is what I had read... "It’s also laminated to the glass front, making for superb viewing angles" from the Verge review (http://www.theverge.com/2012/4/18/2950522/htc-one-v-review#section_4)

sparxone said:
I had broken my One V's Display Glass screen a month ago, the HTC authorized service center informed that the LCD as well as the display glass screen has to be replaced even though just the screen is damaged, the LCD is fine. They said that the replacement part comes bundled with LCD and the glass screen. The cost of replacement will come to Rs.5000 (~100$)
I searched ebay and found replacement glass screens available for as low as 20$.
Should I buy the replacement screen available on ebay? I have no experience in cell phone repairs and this will be risky.
Click to expand...
Click to collapse
I have replaced countless touch screens in my life, but even I won't really think about the V because of the unibody housing. Even with proper instructions and good quality tools and materials (silica glue, alcohol for cleaning and so on...) it will be hell of a job. I personaly don't think that $100 is a high price for OEM parts replaced by the authorised service.
---------- Post added at 08:00 PM ---------- Previous post was at 07:54 PM ----------
klosik said:
Isn't the One V's LCD fused to the glass and inseparable? Those Ebay sellers are probably misleading you.
Click to expand...
Click to collapse
they are not fused together, just glued with special silica glue and tempered. It is replaceable, but it is hard enough for a pro.
If you want to maintain the good quality of the display, you will need to clean troughoutly the LCD with absolute alcohol, or any spec. cleaning liquid in a "cleen room" for not to contaminate it after cleaning, then glue them together with proper silica glue evenly troughout the whole contour of the screen. It is hard work and damn expensive, thus oem will replace the whole screen-touch screen parts.

Thanks for the opinions. I will go with replacement from service center.

Same here!
Hey. I dropped my One V from the bed today morning! :crying: It got a huge crack on the top left!
The crack is not on "the screen" but it still looks pretty awful :-( I have attached the pics. See the last pic for the crack.
What should i do? Please suggest cost-effective methods. Any help is appreciated.

mandarmahajan1996 said:
Hey. I dropped my One V from the bed today morning! :crying: It got a huge crack on the top left!
The crack is not on "the screen" but it still looks pretty awful :-( I have attached the pics. See the last pic for the crack.
What should i do? Please suggest cost-effective methods. Any help is appreciated.
Click to expand...
Click to collapse
if the touch and everything else still works...then live with it...or you can pay to have it repaired by HTC

I thought one V had Corning gorilla glass.
It's not supposed to break that easily wtf?

You can smash a diamond with a hammer. Like Gorilla glass, it is very hard and almost impossible to scratch, but can be easily shattered by sufficient impact shock.

Thread moved to Q&A.
••••••••••••••••••••••••••••••••••••••
" if you choose not to decide, you still have made a choice"~Rush
Sent from my Galaxy Note (i717), using XDA Premium.

I have broken my touch screen,and buy a new touch screen by TAOBAO.COM(Like ebay).And I have to face the problem:how to replace it....
My touch screen is seriously damaged,and should I do it by myself?
My idea is break the touch screen carefully to avoid damage the LCD screen,does it possible?
My first phone is touch diamond and have the same problem....Then I damaged the touch screen and the lcd screen both....I do not want it happened again...
Anyone can give my some advice?
It is too expensive for me to replace it by service centre....And some pros says that will takes $30 to help me.....
Thx

Has anyone had success(or failure) with this yet?

Look at this: http://www.youtube.com/watch?v=w96ldQq5Q2k
If you know what is going on, than try. If not then no. A pro is needed, if you want good product at the and.

just a heads up guys, a CDMA Screen will NOT work on the GSM phone

No gorilla glass for OneV
tranceph0rmer said:
I thought one V had Corning gorilla glass.
It's not supposed to break that easily wtf?
Click to expand...
Click to collapse
One V does not come with Corning gorilla glass.. This was discussed even in some other threads. Even if it have, gorilla glass will only be scratch-resistant and not break-resistant.

I'm getting mine fixed tomorrow as ive cracked the screen also.
The shop thats fixing it confirmed the lcd is bundled with the glass.
It's costing me £50 for the screen and £20 to fit it.
these screens seem very easy to break as my wife has cracked hers now also so I suppose the golden rule is be extra careful with these phones.
I had a wildfire a wildfire s and a desire and never cracked one of them and i'd dropped them all a lot harder than my hov ( which only fell 2ft ). I conclude its down to the raised effect of the glass.

this is because HOV doesn't come with gorilla glass

YouTube maybe???
this post had no solutions so I just opened YOUTUBE and searched for it
complete screen with digitizer replacement video tutorial
here is a link ))) https://www.youtube.com/watch?v=64ePC3FbegM (Russian Language)
if you don´t understand, just look at the video it's not that important to hear what they are saying. If you want, turn on captions ))
and this one is pretty detailed too https://www.youtube.com/watch?v=pxu4wh5jgMk (German language)
and I continued to search and found another videos ))
https://www.youtube.com/watch?v=499K4_-xq98
https://www.youtube.com/watch?v=gPasbSobzwA
ENJOY!!!!
Feel free click thanks button XD

Ken-Shi_Kun said:
I have replaced countless touch screens in my life, but even I won't really think about the V because of the unibody housing. Even with proper instructions and good quality tools and materials (silica glue, alcohol for cleaning and so on...) it will be hell of a job. I personaly don't think that $100 is a high price for OEM parts replaced by the authorised service.
...
They are not fused together, just glued with special silica glue and tempered. It is replaceable, but it is hard enough for a pro.
If you want to maintain the good quality of the display, you will need to clean troughoutly the LCD with absolute alcohol, or any spec. cleaning liquid in a "cleen room" for not to contaminate it after cleaning, then glue them together with proper silica glue evenly troughout the whole contour of the screen. It is hard work and damn expensive, thus oem will replace the whole screen-touch screen parts.
Click to expand...
Click to collapse
There is a video on YouTube decomposing and reuniting the whole machine and we were said it is hard to nicely reunite the machine.
I have thus a request, are there chemical solutions melting silica glues with no damages to the whole machine?

adal5586 said:
There is a video on YouTube decomposing and reuniting the whole machine and we were said it is hard to nicely reunite the machine.
I have thus a request, are there chemical solutions melting silica glues with no damages to the whole machine?
Click to expand...
Click to collapse
Apparently no, or none that can be brought off from a shelf. Cured silica based optical glue can only be dissolved with highly toxic and flammable solutions only. You can altough soften them with denaturetad alcohol or xylene, but there is a high chance you damage the display panel itself with them. Altoug I am talking about the dismantling of the touch panel and the display panel here.
The machine and the display unit (the two of them together) is just glued with standard heat activated glue, it can be softened with denaturated alcohol (which does not harms the other parts) or heat, and the the unit can be brought of from the phone (with phisical force of course). You can glue it together again with standard double sided glue tapes (2 or 1mm width) you can ebay them for. I haven't dismantled One V as of now, but I had a Desire X wich also had a unibody aluminium housing and a unified display panel, but there the whole unit was damaged, so damaging them wasn't a problem when dismantling it, and a prebuild unit was the replacement.

Able to get a Nexus with broken glass for super cheap, questions about repairing.

So as the title says, i'm able to get a Gnex for $50 + the repair costs.
my friends dad dropped his Nexus, broke the glass and wants an s3, so he's selling me his nexus for $50. It's only the glass that's cracked, touchscreen and the actual screen itself still works.
I was looking at dissasembly vids, and galaxy nexus repair parts online and found that the screen assembly appears to be a whole.
You can buy that whole assembly for approx. $150. But I also found this: http://www.ebay.com/itm/Outer-Front...273?pt=LH_DefaultDomain_0&hash=item2572820bc9 which appears to be just the glass front that I need. (excuse me if I can't link outside).
Is it possible to separate the front glass panel from the screen?
I build computers and i've repaired my DHD in the past, so I guess I could say that i'm advanced in repairing techniques, but i'm not really comfortable with soldering electronics or anything. Is it just a case of prying the broken glass off and glueing the new glass back on?
As a poor college student, i'd much rather attempt a difficult repair, than going the easy way and paying $150 bucks for a new screen assembly.
Any help would be MUCH appreciated!
Thanks in advance,
-Mark

Can't take it apart... they are fused together. Don't make my mistake and buy the lens on eBay. My advice is buying a used LCD digitizer from eBay or it still works fine sell it on eBay and double your money... you could get about 100 on there
Sent from my Galaxy Nexus using xda app-developers app

[Q] Suggestions about screen replacement

Hi everyone,
First, I hope there's not another thread opened about this, I promise I did several searches and couldn't find one that was close enough
I have some question about screen replacement.
My dad just dropped his note 2 and damaged the screen (really unfortunate, it was really a little drop!), so I was looking into buying a screen from eBay and replace it myself. yes, it's tricky, but not all that much imo (big +1 to the guy from the YT channel LE55ONS, his videos about this kind of stuff are amazingly well done).
So, the screen is broken, the display is not, but if I bring the phone to the rapair guy he will almost certainly replace the screen and the display for €200+
If I buy something like this
http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
and replace it myself I can do the whole thing and spend some €50 tops.
I was thinking about this one
http://www.ebay.com/itm/Gray-Front-O...item3a7dc376c5
Here come the questions. Can anyone point me towards a good screen replacement for something around $20/30? Is the quality good? I asked the seller if it is actually gorilla glass 2 and he said yes.
Also, these don't have any connectors, the original one has 2. I can always use the connectors from the old screen, but if someone knows about a screen with connectors included, can they please let me know? There's nothing like asking to someone who has already done something like what I'm about to do.
Thank you everyone

Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.

rickyvee said:
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, i tried to pry apart the digitizer. In my Note II is is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer.
Click to expand...
Click to collapse
If you buy the digitizer with the screen attached that's sooo much easier to replace, it's almost not even risky. But it costs somewhere around $200, the same as having it repaired by a professionist. Did you find a cheaper replacement?

[Q] S4 Digitizer assembly replacement

I ruined the digitizer/screen on my s4 and am looking for an original replacement. I ran across this digitizer on ebay http://www.ebay.com/itm/181235347099?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT but I don't ever remember the s4 being released in this blue. Could it be a knock off or fake screen assembly? Opinions/suggestions please!

Att.Fan1982 said:
I ruined the digitizer/screen on my s4 and am looking for an original replacement. I ran across this digitizer on ebay http://www.ebay.com/itm/181235347099?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT but I don't ever remember the s4 being released in this blue. Could it be a knock off or fake screen assembly? Opinions/suggestions please!
Click to expand...
Click to collapse
It's for the Blue AT&T variant.
It will still work. If your front glass isn't broken you can reuse your existing front glass.
Or yours will just look cool and unique. Personally I have the purple rear battery cover from the Sprint varient. All the parts are interchangable.

Skipjacks said:
It's for the Blue AT&T variant.
It will still work. If your front glass isn't broken you can reuse your existing front glass.
Or yours will just look cool and unique. Personally I have the purple rear battery cover from the Sprint varient. All the parts are interchangable.
Click to expand...
Click to collapse
No the front glass is shattered as well but thanks for your input, I'm going to order this one simply because I like blue :laugh: btw, the phone is originally white.

$200 for an lcd???????????! wow

faiyo said:
$200 for an lcd???????????! wow
Click to expand...
Click to collapse
It's for the digitizer assembly. Not the screen. And this phone doesn't even have an LCD. It's got an LED. BIG difference.

I have seen them go for as low as $179,99 on eBay. I have a slight crack on my S4, but i'm not really OCD to the point where I'll spend that much lol.

xPwn said:
I have seen them go for as low as $179,99 on eBay. I have a slight crack on my S4, but i'm not really OCD to the point where I'll spend that much lol.
Click to expand...
Click to collapse
you can also replace the glass only, check it out on youtube. But the risk is frying your S4

You can replace the glass, but there are two main issues:
1. Air gaps/bubbles between the glass and LCD are very possible.
2. It's very hard to find OEM glass, most are fakes.

xPwn said:
You can replace the glass, but there are two main issues:
1. Air gaps/bubbles between the glass and LCD are very possible.
2. It's very hard to find OEM glass, most are fakes.
Click to expand...
Click to collapse
Guys...he broke the digitizer. He cannot just replace the glass.

I was just replying to the poster above me, should have quoted him.

im still shocked the digitizer is $200..when i broke my htc phone i got a lcd + digitizer + full external housing including glass for $40 and it was in perfect condition and it was a polarized 3d screen. it was 6 months since release at the time.

faiyo said:
im still shocked the digitizer is $200..when i broke my htc phone i got a lcd + digitizer + full external housing including glass for $40 and it was in perfect condition and it was a polarized 3d screen. it was 6 months since release at the time.
Click to expand...
Click to collapse
$40? That's extremely cheap! Even the digitizer assembly for an s3 is still at $100 a year and some time later!
Sent from my Incognegro Galaxy SkyNote 2(4.3)

I'm a little confused here... Is the outer glass broken or the actual display? If its the digitizer (the outer glass) it can be replaced. There's people in my area who do it so maybe there'll be one in yours as well. Of recommend having someone else do it unless you're very patient and careful. That could be the difference between a 40 and 180 dollar part.
Sent from my SGH-M919 using XDA Premium 4 mobile app