[Q] hard brick problem please help me - Sony Xperia ZL

I am using Xperia zl c6502
i tried to root my phone
and i did root it but it was not proper but i got root permissions with supersu and rooted with .230 stock firmware
so i already have a flash tool in my pc and all the drivers
and had recovery
i was not happy and found a new rom
http://forum.xda-developers.com/xperia-zl/development/rom-ultimate-dualxzl-ultra-v1-t2989281
every thing goes well till the end and i rooted via recovery mode
it was written that
FOR UNLOCKED BOOTLOADERS
1. Copy The AROMA ROM v1 Zip To Ur Phone
2. Backup Ur Datas If U Need It
3. Switch Off and Reboot To Recovery
4. Wipe Data Factory Reset ( Recommended )
5. Flash AROMA ROM
6. Simply (Carefully ) Read All Options In Aroma Then Proceed
7. After Installation Do Not Choose Reboot option In Aroma. Un Check it . Click Finish AROMA and Then
8. Flash Any 292 Based Custom Kernel Zip Or Flash .292 based kernel
9. Reboot 3 or 4 Times To Get A Stable Performance
so i flash .292 based kernel via recovery mode which i downloaded before starting to install everything
in the end it installed well and i rebooted my phone to system
but
screen remained black, no recovery now, pc dont recognise phone on connection
i did hard reset from the back button manually
and try to connect to flash tool to flash new rom
in flash tool on pc
after few tries
first my phone was disconnected
then it did.nt recognise my phone and asked which was my phone i tapped xperia zl
then it shows device connected when i check device status via fastboot mode
it shows adb connected with usb debugging
but no recovery, no displayon phone and no root
at the moment
i have these problems
sometimes flashtool can detect my phone in adb mode with usb debug and some times it get connected in fastboot mode
but i was not able to flash my previous rom via that flash tool
neither i was able to go in recovery nor able to boot my phone
it just a black screen
and after hard reset it shows orange light when i plug it in for charging but screen is black
what should i do please help.

If can connect via flashtool... then try flashing a stock kernel... and see if it boots... bt the best thing in my opinion is to download a stock firmware and flash that via flashtool...

thanks
as i was trying to connect via flashtool now on win xp my phone was detected by system and i installed flashtool in win xp and drivers. then i was able to flash the stock rom by flashtool.
now my phone booted again am happy..
but my phone was not on the stock rom as it was before
it appears it rooted on the aroma i think but am confused what to do next
should i reinstall the aroma again fresh via recovery?

Try to flash a different rom this time and check whether its working or not... if it does then mayb redownload your previous rom again n try that... again...

Related

[Q] cannot boot into recovery anymore cwm

I think in all the flashing I kept the phone plugged in while rebooting into CWM.
As stated in the thread:
Warning Do not keep phone plugged in while rebooting into CWM, phone may loose the ability to boot into cwm, reinstalling the root and CWM does not fix it. Also xparts does not boot inot CWM. full wipe is needed.
Can anyone help me with this? How do I perform a full wipe? I tried to wipe with fastboot, also tried
to flash another stock image with flashtool. How can I get cwm recovery back to work.
I had the same problem a few days ago. After flashing the existenz ultra update I kept usb plugged in and recovery was completely gone.
I reflashed .67 stock rom via flashtool.
Then I used this guide to get root access: http://forum.xda-developers.com/showthread.php?t=2388946
For the 11. step use this .67 kernel: https://drive.google.com/file/d/0B0duxzJgPpcyX3hhbV9wVFQ4R0E/edit?usp=sharing
You have to close flashtool BEFORE you use DooMLoRD_Easy-Rooting-Toolkit_v18 !
After the root, I flashed NUT's "lockeddualrecovery2.6.3-RELEASE.windows.zip" : http://forum.xda-developers.com/showthread.php?t=2288118
and everything worked fine again.
For the rooting process you'll need "unknown sources" and "usb debugging" checked.
Take care to follow every step as described and you should be good again. :good:

Redmi 1s stuck into mi logo

My phone stuck at mi logo even the recovery can't be opened
I was using cynogen 12.1 and then i download its update after that it sticks at mi logo
Unable to open recovery
Thanks in advance help as soon as possible
Don't worry, if you can enter fastboot, you can fix it. Follow this guide http://en.miui.com/forum.php?mod=viewthread&tid=23234&page=1#pid459792 If you do everything right, stock miui5 or miui6 will be installed, depends what you choose. I recommend you to download v45 miui5, I have used that version few times. You will have to install custom recovery and root again if you want a custom rom later. If the Miflash program does not recognize your phone in fastboot mode, then download and install these drivers, I think it should work. http://forum.xda-developers.com/redmi-1s/general/tool-adb-drivers-redmi-1s-t2904411
You need not go back to stock miui. If you update the rom, the recovery should still be intake, unless you did something to it, which is quite unlikely unless you selected to flash it as well.
Make sure your phone is completely off. Remove battery and insert back. Pressing the vol - and power button should boot your phone into the recovery(if i rmb correctly). From there, reflash the first cm12.1, not the update which you download, and it should boot fine again. Preferably, go for a clean install, unless you have data which u haven't backup, then go for the first.
If you flash a recovery and if indeed your recovery is corrupted, just reflash using adb.
Flashing a rom should not cause any damage to your recovery as it doesn't touch your recovery files.

bricked after superSU update and hard reset

Hey,
after i instaled superSU update, my z1 compact was bricked. I made hard reset from recovery and after restart im stuck in sony logo and cant even access recovery. Is there any solution?
I tried almost everything... i cant repair it with xperia companion ( because of unlocked bootloader) and when i put phone to fastboot mode my computer doesnt see it. ( i have drivers and before the brick fastboot was working...). I was wondering if is it possible to load the system from sdcard somehow...
Did you have a backup and recovery? Mine bootlooped as well but when notification light turns on at boot up, press volume down to enter recovery and restore from backup. If you don't have a backup but can enter recovery, flash supersu.zip version 2.79 or earlier. If you don't have access to recovery, use flashtool to flash boot.img, or you can flash latest stock rom using flashtool. Hope this helps.
i have recovery but i cant access it because im stuck in sony logo before the nofication light turns on. Ill try flashtool but my computer cant recognize phone so I'm afraid the motherboard is damaged...

My lenovo zuk z2 bricked :( :( :(

At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
csemasud said:
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
Click to expand...
Click to collapse
Press the power button until it vibrates and reboots. Reboot into recovery. This ll take you to TWRP.
Now Wipe -> Advanced Wipe -> Wipe Cache, Dalvick Cache, System, Data.
Download any stable nougat rom like AEX 4.6, DOT OS Latest, Viper 3.1.1 and transfer it to OTG pen drive and connect the OTG drive to the phone and install the ROM of your choice by selecting the storage as OTG and reboot to system after flashing.
Your phone should boot normally now.
Try this and update if it worked.
I can't enter into recovery mode
either stock recovery or TWRP
csemasud said:
I can't enter into recovery mode
either stock recovery or TWRP
Click to expand...
Click to collapse
Flashing Stock Nougat may have relocked the bootloader.
Unlock the bootloader again and flash the latest TWRP 3.2.1 in fastboot mode.
when i connected through PC by Adb sideload it's show no device found in command promt
try 9008
csemasud said:
when i connected through PC by Adb sideload it's show no device found in command promt
Click to expand...
Click to collapse
Try mi flash method, the i dont know much about this but you can search on xda
This one works 100%
https://forum.xda-developers.com/le...-to-recover-hard-bricked-zuk-z2-plus-t3576007
had exactly the same problem and my phone works now with this
I have unbeicked my device yesterday with MI flash, ask me if you run into problems

No more recovery or fastboot.

My device is an Xperia Xa1 Ultra G3223.
Long story short, I was on rooted Android 7.0 with magisk v16 or 17 don't remember and TWRP. I was unable to update my firmware using the system so I used XperiFirm to get the latest firmware from my carrier. I used flashtools to built a .ftf for branding I wrote Sony and version I put 48.1.A.2.101. I did a factory reset then flashed it.
Now I can boot into android no problem but if I try to enter recovery it just reboots into android using adb reboot recovery. And if I try to use adb reboot-bootloader it just boot loops and the only way I can get out of it is to hold vol down to enter flash mode and reflash my .ftf. I tried using flashtool to enter fastboot but it still boot loops.
Now I'm at a loss for what to do. I was going to try and flash a kernel and recovery from another thread here but I cant do that. Is there a way to flash a kernel/recovery without fastboot or something ?
Thank for any help
Ok well i finally got it working again! I tried using Emma and that updated me to 116 but i was unable to get to the bootloader. Funny enough i unplugged my phone from the usb hub i was using and plugged it directly to my pc i was able to get to the bootloader. So i re flashed 101 and then flash a kernel and a recovery and all is good now no more bootloop when i try to go into the bootloader.

Categories

Resources