At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
csemasud said:
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
Click to expand...
Click to collapse
Press the power button until it vibrates and reboots. Reboot into recovery. This ll take you to TWRP.
Now Wipe -> Advanced Wipe -> Wipe Cache, Dalvick Cache, System, Data.
Download any stable nougat rom like AEX 4.6, DOT OS Latest, Viper 3.1.1 and transfer it to OTG pen drive and connect the OTG drive to the phone and install the ROM of your choice by selecting the storage as OTG and reboot to system after flashing.
Your phone should boot normally now.
Try this and update if it worked.
I can't enter into recovery mode
either stock recovery or TWRP
csemasud said:
I can't enter into recovery mode
either stock recovery or TWRP
Click to expand...
Click to collapse
Flashing Stock Nougat may have relocked the bootloader.
Unlock the bootloader again and flash the latest TWRP 3.2.1 in fastboot mode.
when i connected through PC by Adb sideload it's show no device found in command promt
try 9008
csemasud said:
when i connected through PC by Adb sideload it's show no device found in command promt
Click to expand...
Click to collapse
Try mi flash method, the i dont know much about this but you can search on xda
This one works 100%
https://forum.xda-developers.com/le...-to-recover-hard-bricked-zuk-z2-plus-t3576007
had exactly the same problem and my phone works now with this
I have unbeicked my device yesterday with MI flash, ask me if you run into problems
Related
Help me guys, i am not able to change recovery in my lenovo k5 a40 2gb, i am using latest twrp by shreps and whatever i do only shreps latest recovery boot other recoveries stuck on lenovo screen. And only 7.x roms boot, 6.0 roms doesn't boot. Help me guys wanted to change recovery to russian or scritch ver and to flash pac rom. All are stuck at lenovo boot screen. And when i flash pac rom only pico gapps successfully flashed other gives error 70.
Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)
KiiKeEp said:
Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)
Click to expand...
Click to collapse
Sorry bro no luck. Not able to reach fastboot mode after removing battery and connecting with pc. But reach fastboot mode with battery and connect to pc and then remove the battery still in fastboot then flashed scritch r4 recovery but no luck only get lenovo boot screen.
Anyon, guys i cant use this phone without a custom good working rom( prefer mm because of xposed)
Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?
mr.badman said:
Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?
Click to expand...
Click to collapse
Flash Stock Rom first of all with the help of QPST Tool and then flash latest twrp recovery. After that flash pac-rom.
That's it, i am posting as it worked for me.
Stock Rom - http://moto.shreps.fr/?dir=Lenovo Vibe K5 (A6020)/ROM/StockFirmwares
Hope it work for you.
I wanted to migrate to Nougat with Resurection Remix rom or H-rom. I have unlocked bootloader.
After flashing RR rom it booted once, and it stuck in bootloop keeps restarting to last TWRP 3.1.1.1.
I tried to use LGUP to downgrade to 20P, but it won't connect (it tried method with changing dlls too).
I tried LD Flash Tool too but it won't connect in download mode.
LGUP won't recognize device and says UNKNOWN.
It boots to fastboot instead.
In download mode it shows this:
633a 899
modified
I have TWRP, fastboot and download mode, but it wan't connect.
Do you have any solution?
Could anybody help me? 2 months and no solution
MrHagen said:
Could anybody help me? 2 months and no solution
Click to expand...
Click to collapse
Format data & clean flash; ie: system - data - cache/dalvik cache
Proceed to install. Intsall ROM & GApps (root if acclipable) then - REBOOT
as for trying to access lg up etc u have TWRP so no need.
I tought of having lost my phone so I did a remote wipe through google my devices... the phone was rooted with TWRP recovery.
After the remote wipe now has no rom... at boot first shows the oem unlock warning, then TWRP starts, and that's it... since the remote wipe deleted everything including storage I can't restore a backup.
I downloaded the latest signed flashable zip from here, copied it on a USB stick, and connected it to the OP5T. Then from TWRP mounted the USB Storage, and did a rom install from it. Problem is... nothing changed. Still at boot it return in TWRP instead of booting the OS :crying:
Any idea how to solve this?
adri72 said:
I tought of having lost my phone so I did a remote wipe through google my devices... the phone was rooted with TWRP recovery.
After the remote wipe now has no rom... at boot first shows the oem unlock warning, then TWRP starts, and that's it... since the remote wipe deleted everything including storage I can't restore a backup.
I downloaded the latest signed flashable zip from here, copied it on a USB stick, and connected it to the OP5T. Then from TWRP mounted the USB Storage, and did a rom install from it. Problem is... nothing changed. Still at boot it return in TWRP instead of booting the OS :crying:
Any idea how to solve this?
Click to expand...
Click to collapse
Download latest oos and sideload it via twrp /adb...
Sent from my ONEPLUS A5010 using Tapatalk
ahepas said:
Download latest oos and sideload it via twrp /adb...
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Did that already -- didn't succeed.
In the end I tollowed this guide -- took a couple of hours just because I could't see the "unknown device" when connecting it in Qualcomm download mode. Turns out for some reason I already had the driver installed on my pc and didn't need to install anything.
In TWRP go to wipe, then format data and type in yes. Then download, transfer and flash dm-verity zip for the oneplus 5 (it's the same for both phones). Then reboot recovery and try installing the rom again.
This unbrick tool is your best friend
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
Just flash latest firmware zip then flash a custom rom lol. With twrp, theres always a way around a soft brick.
I had this problem too. Everytime when i installed the rom and rebooted the phone, there was a message no os installed. This did it work.
1- wipe everything. Then use format data (not wipe).
2- install the rom.
3- select reboot from receovery menu and select reboot to recovery.
4- install the rom again.
5- reboot the device normally.
Hope this will help.
Sent from my OnePlus 5T using XDA Labs
I realized the link I meant to post in my reply above didn't come across.
I did solve the problem with this guide:
https://forums.oneplus.com/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-5t.751497/
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Arafa1994 said:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Click to expand...
Click to collapse
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Sent from my Lenovo P2a42 using XDA Labs
sm00th4f3 said:
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Click to expand...
Click to collapse
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Arafa1994 said:
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Click to expand...
Click to collapse
What do you mean The bootloader is the bootloader.
Danoz88 said:
What do you mean The bootloader is the bootloader.
Click to expand...
Click to collapse
In my moto Z Play some roms needs Nougat bootloader like xperince
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Arafa1994 said:
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Click to expand...
Click to collapse
We only have one bootloader.
We have different firmwares though like nougat and marshmallow.
You will need Firmwares S244 for nougat ROMs.
That firmware must be flashed through ota. Stockrom-feature. Simply using twrp does not count as doing otas.
Basic starter things: Have Firmware S244 or S251 installed through stock ota feature.
Then use my earlier stated instructions.
Thx alot it worked & no problems
Hi,
I recently installed magisk, then xposed and my phone went into bootloop. I reflashed with original boot image and wipped data and it was starting ok.
Then i installed magisk threw TWRP.
But the OTA would not work.
Si I'd like to flash the stock rom to restart from zero.
Can I just flash it like that, with mi flash ?
Or do I have first to unroot ? And to relock bootloader ?
takhama said:
Hi,
I recently installed magisk, then xposed and my phone went into bootloop. I reflashed with original boot image and wipped data and it was starting ok.
Then i installed magisk threw TWRP.
But the OTA would not work.
Si I'd like to flash the stock rom to restart from zero.
Can I just flash it like that, with mi flash ?
Or do I have first to unroot ? And to relock bootloader ?
Click to expand...
Click to collapse
no need of unrooting and never lock your bootloader with custom recovery or rom .
I recommend you to flash the stock rom in edl mode , connect your device in fastboot mode to your PC and open command prompt in your adv/fastboot folder .
then type the command : fastboot oem edl , the screen of the device will turn off , but notification led will blink , then flash stock firmware via MiFlash, after flash completed , hold power button for about 10 seconds(until you feel the vibration)
Thanks Mate ! I do this rght now !
(my phone is out: only starting if I install magisk with TWRP... Flashing the stock boot img will go in boot loop. So weird that let's go back to the stock )
nikoman1987 said:
no need of unrooting and never lock your bootloader with custom recovery or rom .
I recommend you to flash the stock rom in edl mode , connect your device in fastboot mode to your PC and open command prompt in your adv/fastboot folder .
then type the command : fastboot oem edl , the screen of the device will turn off , but notification led will blink , then flash stock firmware via MiFlash, after flash completed , hold power button for about 10 seconds(until you feel the vibration)
Click to expand...
Click to collapse
Where i can download stock firmware sir ?