My phone stuck at mi logo even the recovery can't be opened
I was using cynogen 12.1 and then i download its update after that it sticks at mi logo
Unable to open recovery
Thanks in advance help as soon as possible
Don't worry, if you can enter fastboot, you can fix it. Follow this guide http://en.miui.com/forum.php?mod=viewthread&tid=23234&page=1#pid459792 If you do everything right, stock miui5 or miui6 will be installed, depends what you choose. I recommend you to download v45 miui5, I have used that version few times. You will have to install custom recovery and root again if you want a custom rom later. If the Miflash program does not recognize your phone in fastboot mode, then download and install these drivers, I think it should work. http://forum.xda-developers.com/redmi-1s/general/tool-adb-drivers-redmi-1s-t2904411
You need not go back to stock miui. If you update the rom, the recovery should still be intake, unless you did something to it, which is quite unlikely unless you selected to flash it as well.
Make sure your phone is completely off. Remove battery and insert back. Pressing the vol - and power button should boot your phone into the recovery(if i rmb correctly). From there, reflash the first cm12.1, not the update which you download, and it should boot fine again. Preferably, go for a clean install, unless you have data which u haven't backup, then go for the first.
If you flash a recovery and if indeed your recovery is corrupted, just reflash using adb.
Flashing a rom should not cause any damage to your recovery as it doesn't touch your recovery files.
Related
Hi
While flashing CM13 on my redmi 1s, I did a clean install, meaning wiping everything, and then when I went to flash CM13, TWRP just reboots the moment I swipe to install. This happens with any .zip file.
I installed CWM using fastboot, and that gives me the same problem. The moment I try to flash/install anything using a recovery, that recovery reboots and doesn't flash anything. My device is now useless since it doesn't have an OS installed and no way of doing so..
From what I can tell the system partition is bad because when I boot into recovery it isnt mounted
When I take out the battery now it just goes straight to the fastboot screen. I can take it into recovery but it goes to fastboot by default
Please help
Hi dude,
i guess you have checked the integrity of your cm13 ROM file and (winrar>test archive) , your best bet would be flashing a fastbootrom and then come back to cm. Head over to miui and download latest fastboot rom applicable to you.
And its usual booting into fastboot when there is no OS installed atleast for our device so chill dont loose hopes..!
vbvn said:
Hi dude,
i guess you have checked the integrity of your cm13 ROM file and (winrar>test archive) , your best bet would be flashing a fastbootrom and then come back to cm. Head over to miui and download latest fastboot rom applicable to you.
And its usual booting into fastboot when there is no OS installed atleast for our device so chill dont loose hopes..!
Click to expand...
Click to collapse
Flashing the fastboot rom doesn't work.. My recovery is broken too, because I can't flash anything.. In either MiRecovery 2.0.1, CWM or twrp.. When I flash the MIUI rom via fastboot it just boots into recovery..
EDIT, I just got it into MIUI but the 4.3 version from china, without Google, and I can't download google via the MI market. So i'm downloading an international version now and will try to flash using MiFlash.
Does anyone know how I can fix the recovery? It still won't flash anything and reboots the moment I try to.
Have anyone got a bug with TWRP Recovery And CyanogenMod 14.1 ?
I have flashed this rom and everything seemed cool until I have tried to boot into Recovery Mode.
When I try to boot into a recovery mode, OnePlus logo with Powered By Android shows and after that the two physical buttons on the sides of fingerprint scanner lights up (the two dots) and after few seconds it seems like OnePlus 3 turns off itself rather than booting into the recovery. I have tried to turn on the OnePlus 3 but to do that I need to wait up to 1 minute and then I am able to turn it on again otherwise it doesn't turn on if I don't wait and this happens every time when I try to enter Recovery Mode. I have tried to re-flash the TWRP Recovery couple of times via fastboot but it doesn't do anything, the same thing happens. I guess that TWRP Recovery is not compatible with Nougat ? However, this rom recovery (downloaded from CyanogenMod website) seems to work but it doesn't allow me to flash any .zips from internal storage and also doesn't support encryption so it's useless and I can't do anything with it.
Is there anything I can do to restore CyanogenMod 13 or get a recovery to work so it would restore the advance settings and allow me to flash .zips again ?
Ohh and the recovery I use is from this thread (https://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733)
Use this recovery and flash using fastboot. You know how to use fastboot right?
https://forum.xda-developers.com/attachment.php?attachmentid=3971072&d=1481920669
hey'
every time i boot my phone it bootloop into recavery
what to do?
mega unbrick guide...
timrock7 said:
mega unbrick guide...
Click to expand...
Click to collapse
but in the guide it's you see nothig but a black screen i have recavery https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
it hapen when i exedantly press the istall update of the ota (i had OxygenOS 4.0 and i perss on the update of 4.0.3)
You should never install an update through the phone's update setting while using a custom recovery. The updates are designed to work with the stock recovery only.
If you can still boot into and use TWRP, use it to flash the full ROM of OOS 4.0.3.
If you can't boot into TWRP, try to see if fastboot works and manually sideload a working ROM in.
Otherwise, you're going to have to use the unbrick guide. Your phone doesn't have to be completely bricked to use it. It simply reverts the phone to a truly factory-fresh state (relocks bootloader, wipes everything, etc. - At least method 2 does anyways).
I got stuck in the same situation some time ago, and in order to solve it I had to flash the stock recovery, let it restart, it tried to update (and failed) and then it booted to system again. Hopefully that way you can avoid installing everything again. Once the device boots you can try to update with the stock recovery and revert to twrp if you want.
I have a spare Le1s with me so wanted to play around with it for my tiny project, using Le1s as universal remote with Alexa/Echo (using Anymote Skills).
I flashed LineageOS ROM and GAPPS, it booted fine.
Then i tried to flash TWRP using adb. Since then it is on continuous Recovery Boot Loop. It switches On to Stock recovery screen and switches off within seconds and then switches back on.
So I am not able to ADB or use SP Flash tool to flash again.
Tried hard reset also, nothing is working. Vol+ Vol- Power also not working.
So it is lying on my side table going ON and OFF in recovery screen
Any advise, please share.
Thanks.
Flash stock firmware through sp flash tool...search in xda
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Kaps said:
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Click to expand...
Click to collapse
Open device in recovery mode when it switched off ... And then format data in wipe by typing yes .... Then flash rom u want ... ?
Well the question is how ?
Device is not switching off and not staying in recovery its goes On and Off in a loop.
Try to open other modes .... Fastboot ...if it stays flash new twrp ..... And if it boots again into recovery then may be it's a hardware issue your power button may be stuck
Hi.
I dont know where to start.
My redmi 5a had the last original software miui 11 based (android 8.1). Then I successfully unlocked the bootloader some days ago and somehow managed to install nitrogenOS (android 11 based).
Then I tried to flash another custom rom and everything went bad. I cant boot into any os anymore. I get stuck at the boot screen with the android logo and after some time it starts again and again...
I already tried to install a custom oreo recover firmware, which works, so I could start twrp again. But then every os I tried to install does not work. Fastboot works.
I am very confused now and dont know what to do next
Since you have bootloader already unlocked you can use Mi Flash (Xiaomi's own flash tool) to flash a stock ROM back to you device. This usually help, but of course, it will make you lose the custom ROM installed and the recovery.
Also, pay attention while flashing with this tool. There is an option at the bottom of the program that locks the bootloader again. If you don't want that you have to change this options every time you close the program.
OK, I started XiaomiTool V2 (on linux) and choose the option, that my device is bricked. I then have to choose my model (Redmi 5a riva) and start in fastboot. Now the tool starts to download and install the following rom to recover the smartphone:
riva_global_images_V11.0.2.0.OCKMIXM_20191106.0000.00_8.1_global_605da3d46d.tgz
But it does not work. The smartphone starts and I can see the start screen (powered by android). After some seconds there is a white screen with the words: just a sec. Then the smartphone starts again and it repeats again and again...
Nobody an idea?
sylvio2000 said:
OK, I started XiaomiTool V2 (on linux) and choose the option, that my device is bricked. I then have to choose my model (Redmi 5a riva) and start in fastboot. Now the tool starts to download and install the following rom to recover the smartphone:
riva_global_images_V11.0.2.0.OCKMIXM_20191106.0000.00_8.1_global_605da3d46d.tgz
But it does not work. The smartphone starts and I can see the start screen (powered by android). After some seconds there is a white screen with the words: just a sec. Then the smartphone starts again and it repeats again and again...
Click to expand...
Click to collapse
This has happened to me before. From the name of the image that XiaomiTool download and installed I can assume it is an more recent ROM. (since it has 2019 and 8.1 Global in it)
Do not let XiaomiTool download and install a ROM. Download a older Stock ROM yourself and make XiaomiTool install the ROM that you have download.
As I said previously. Try to download the original Stock ROM that came with your phone when you bought. BEFORE ANY official updates from Xiaomi. This have worked for me.
Hi.
Thanks It works now. I have installed the stock rom.
Is there a guide to get from stock rom (nougat) to custom rom?
sylvio2000 said:
Hi.
Thanks It works now. I have installed the stock rom.
Is there a guide to get from stock rom (nougat) to custom rom?
Click to expand...
Click to collapse
So firstly you need a recovery image (TWRP, PBRP, OF, Batik Recovery) to replace MIUI Recovery. flash it via fastboot with adb (you can do it right?).
After that reboot and push the button to recovery and remember make backup firstly or you can ignore it and yeah do it own your risk.
wipe or advanced wipe Cache, Data, System, Dalvik, Vendor.
and then install the CUSROM, and GApps.
and yeah only that to install CUSROM i know