Error boot cartifiostion verify - G3 Q&A, Help & Troubleshooting

Hi, I tried today INSTALL a new system on their LG G3 with T- Mobile ( EE) . I have no idea what happened , but when I 'm trying to come back to the factory settings , or enable TWRP , I'm bad at the top of the screen and starts to afraid to do hot , disappears mistake and shines to change the red and blue light , help!
Error: boot cartifiostion verify
[16100]----------------------------
[16100] Source booting Error!
[16100] Cause : boot cartifiostion verify
[16100]
[16100]-----------------------------

Letniak said:
Hi, I tried today INSTALL a new system on their LG G3 with T- Mobile ( EE) . I have no idea what happened , but when I 'm trying to come back to the factory settings , or enable TWRP , I'm bad at the top of the screen and starts to afraid to do hot , disappears mistake and shines to change the red and blue light , help!
Error: boot cartifiostion verify
[16100]----------------------------
[16100] Source booting Error!
[16100] Cause : boot cartifiostion verify
[16100]
[16100]-----------------------------
Click to expand...
Click to collapse
KDZ UNBRICK and start over is your best bet.
Save what you can to your PC.
Copy what you want off the SD and format that also.
Don't forget to wipe all partitions and caches.

ingoljosh said:
KDZ UNBRICK and start over is your best bet.
Save what you can to your PC.
Copy what you want off the SD and format that also.
Don't forget to wipe all partitions and caches.
Click to expand...
Click to collapse
the problem is that you can not format the hard reset and when I reset the phone settings have the same error

Related

problem after s-off

hi , i used thi guide http://forum.xda-developers.com/showthread.php?t=928160 for use the s-off in my desire z , this guide is good now the device is s-off but when i turn on the phone remains blocked in bootscreen htc... I throw the phone or can I save it? pls help me thanks
pls help meee
Can you boot to bootloader? With the phone off, hold vol-down while pressing power on. If you see a menu screen show up, navigate to Recovery. Tell us how far you can go.
yes work bootloader and recovery but goes wrong the recovery some problem whit command but in the option of recovery are wipe cache wipe data (already tested) and i try hard reset but nothig however thank you for your reply and scuse me for my english
Rosemberg91 said:
yes work bootloader and recovery but goes wrong the recovery some problem whit command but in the option of recovery are wipe cache wipe data (already tested) and i try hard reset but nothig however thank you for your reply and scuse me for my english
Click to expand...
Click to collapse
So you wiped, then installed a rom zip, then tried reboot but it gets stuck at the white HTC screen? Do you see any error messages in the recovery menu?
It's possible your emmc chip went bad. Follow the steps here that start with "To be sure that you really are effected by the emmc issue..."
i just try hard reset , wipe cache, data but nothing... when i enter in recovery appears a error message : E: can't open /cache/recovery/command ...
I would try to put the original rom whit adb but in the cmd the device appears connect but offline ...
Sounds like another busted emmc chip story that's it when I get my replacement I think I'm gonna be too scared to root it
Sent from my HTC Vision using XDA Premium App

Dead micromax NINJA 4 a87 please help experts

i recovered my CWM 5 .....
but after flashing stock rom above ..
i got some satus 7 error......got some nc.vf caused this error
...then i wiped all cache and reset the phone...still the same...
..after that suddenly deleted system folder and data folder...
the problem is I cannot boot into recovery mod and fastboot mode...the phone just vibrate and live in dead black screeen.....please help me out to flash the dead phone......
File Copy Error satus 7 nc.vf With CWM Recovery-MMX-A87 STOCK ROM Installation
m4v3rick_79 said:
i recovered my CWM 5 .....
but after flashing stock rom above ..
i got some satus 7 error......got some nc.vf caused this error
...then i wiped all cache and reset the phone...still the same...
..after that suddenly deleted system folder and data folder...
the problem is I cannot boot into recovery mod and fastboot mode...the phone just vibrate and live in dead black screeen.....please help me out to flash the dead phone......
Click to expand...
Click to collapse
Bro I also face the same problem but my OS working good that time ...
i think CWM Recovery Not Working properly for this phone or not make for all type custom ROM install able.
I try also toggle assert script and toggle E:signature verification with disable way but all time i failed to reload original stock GB MMXOS
You try fastboot mode to flash MMX stock recovery again and again with VOL+Pwr Key with or without black screen if ADB working on your phone
then may be your old recovery back again and you install stock OS again.
try fastboot flash recovery recovery.img with adb shell.
PKDSLG said:
Bro I also face the same problem but my OS working good that time ...
i think CWM Recovery Not Working properly for this phone or not make for all type custom ROM install able.
I try also toggle assert script and toggle E:signature verification with disable way but all time i failed to reload original stock GB MMXOS
You try fastboot mode to flash MMX stock recovery again and again with VOL+Pwr Key with or without black screen if ADB working on your phone
then may be your old recovery back again and you install stock OS again.
try fastboot flash recovery recovery.img with adb shell.
Click to expand...
Click to collapse
head here for more:
link
MICROMax a87 dead
m4v3rick_79 said:
i recovered my CWM 5 .....
but after flashing stock rom above ..
i got some satus 7 error......got some nc.vf caused this error
...then i wiped all cache and reset the phone...still the same...
..after that suddenly deleted system folder and data folder...
the problem is I cannot boot into recovery mod and fastboot mode...the phone just vibrate and live in dead black screeen.....please help me out to flash the dead phone......
Click to expand...
Click to collapse
same here,but no vibrate format boot,system,data in cwm 5...no help here.
go micromaxx service center
Dead ninja a87 mmx
m4v3rick_79 said:
i recovered my CWM 5 .....
but after flashing stock rom above ..
i got some satus 7 error......got some nc.vf caused this error
...then i wiped all cache and reset the phone...still the same...
..after that suddenly deleted system folder and data folder...
the problem is I cannot boot into recovery mod and fastboot mode...the phone just vibrate and live in dead black screeen.....please help me out to flash the dead phone......
Click to expand...
Click to collapse
hi,dude you find any sollution for this same here ..plz replay
mmx ninja 4 A 87
I rooted my device (Micromax A 87 AKA Ninja 4) successfully as directed by your previous post, but after replacing Mlab Launcher by hololauncher I restarted and now only pattern lock screen is visible and I can only receive calls, sms, emails (my wifi is enabled) and other notifications. I think it is a problem of launcher. Please help !!!!!!!
rravi284 said:
I rooted my device (Micromax A 87 AKA Ninja 4) successfully as directed by your previous post, but after replacing Mlab Launcher by hololauncher I restarted and now only pattern lock screen is visible and I can only receive calls, sms, emails (my wifi is enabled) and other notifications. I think it is a problem of launcher. Please help !!!!!!!
Click to expand...
Click to collapse
if you have wifi enabled, you can login to playstore from computer and install a new launcher .
I was having that.
Actuly i over flashed cwm which was not mine (a87) I was able to use whole phone but was unable to use recovery mod. And as our phone does nt have download mod (OTA) we can cant flash our stock rom by odin. so i deleted my launcher and as i was unable to use recovery and i now i was nt able to use phone actuly that was my plan and i then went to micormax service center and ther i showed them they told that it has os problem as my phone was in warranty so they told that they will change my whole motherbord and after 15 days he told to call me .
rravi284 said:
I rooted my device (Micromax A 87 AKA Ninja 4) successfully as directed by your previous post, but after replacing Mlab Launcher by hololauncher I restarted and now only pattern lock screen is visible and I can only receive calls, sms, emails (my wifi is enabled) and other notifications. I think it is a problem of launcher. Please help !!!!!!!
Click to expand...
Click to collapse
hi user,.. i kind of had the same kind of problem once,... but there is a simple solution now
just download a PC suite for android like Moborobo, etc... just connect your phone to the pc via USB
there,... install the device drivers if its not recognized..
after that,... just download any Launcher to your phone through the PC suite,..
there..... its done..!! :good: the launcher automatically runs
Micromax a87 phone dead only vibrate once, unable to fastboot also, how to solve?
micromax a87 doesnt starts, it only vibrate once when we insert battery. unable to fastboot , android device is not showing in device manager on pc while connecting. how to start the mobile. i tried cwm recovery but phone doesnt flash. please anyone please help
my email id - [email protected]
dead ninja 4
I was unable to remove my old rom and flash new row so i booted into cwm nd formated all the things in the advance list.. .
Nd when i rebooted it..it stuck so i pulled out batery...and after that it dosent even start.. It does not even respond to power buton.. Plz hlp.. Plz hlp my email id is [email protected]

Lg Optimus G pro E988 Doesn't BOOT (maybe bricked)

Hi there, I recently bought an used unlocked LG G PRO E988 (made in korea) version. I rooted it. I tried to flash a custom rom but got stuck in boot loop with a security warning saying "SECURE booting ERROR!! Cause: boot certification verify" But while booting if I kept the volume up and power botton pressed it would give me "SECURE booting ERROR!! Device is unlocked so booting success" , However i could not get into the download mode no matter which ever key combination i tried. Finally pressing the volume up ,home key and power botton at the same time while putting back the battery on i ran into recovery mode and flashed a new rom "sphinx" and it was working fine, though I kept getting the "SECURE booting ERROR!! Device is unlocked so booting success" while booting up. I installed the Philz touch recovery while installing sphinx rom but day before yesterday I wanted to install the default cwm recovery and flash sphinx again with less apps,so from the recovery mode i wiped dev cache,wiped cache partion (and i think i wiped data/factory reset as well ) installed the sphinx rom again and rebooted from sphinx installation screen where i need to check a sqaure box to reboot. but my phone got stuck in boot loop again and with the same security warning "SECURE booting ERROR!! Cause: boot certification verify" but this time pressing the volume up and power button while connecting usb or putting back the battery didn't change the security warning to "SECURE booting ERROR!! Device is unlocked so booting success" neither could i get into my recovery mode. And i have always failed to log into download mode. I read almost all the threads about how to get into g pro download mode but never succeed. The only screen i was getting besides "hard reset" and "boot logo with security warning" was a screen with this message "Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." which would eventually take me to the boot loop again if i kept pressing the power button. sigh ! And at this point my phone was not being detected by my pc. I tried "[GUIDE] Optimus G Pro Full Hard Brick fix" by ricanares, but i couldnt get to download mode so the process failed for me After searching for hours and reading tutorials i found out about pdanet drivers and mtk droid tools. which finally detected my phone in pc only when the creen " Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." appears. Using mtk droid tools i tried to use a boot image (from an extracted .tot file)and recovery(from same .tot file) but i was getting an error saying no split boot image found.Tried using extracting a .tot file and sideloading the recovery.bin and boot.bin .Tried pushin and sideloading cusom recovery.apk files and all efforts in vein. For any files i send using sideload my phone shows an error "E:footer is wrong ; E: signature verification failed" Using mtk droid tools i could enter into a recovery mode but i dont think it is the cwm recovery mode. it has fewer options. I am so lost at this point ! I need some expert help ...
Things working
1. Boots into stock recovery using mtk tools.
2. Pc recognizes device as LG Android net phone
3.Mtk tools recognizes the device as LG E988
4.Can use adb sideload options to send files to phone in recovery mode (but phone outputs error as 1st attached image )
5.In recovery mode I can see and go into /cache folder using update from cache option.but theres nothing there
THINGS NOT WORKING
1.Doesnt Boot into recovery mode using physical buttons
2.Doesnt Boot into download mode
3.Cant get into fastboot mode with adb commands
4.Doesnt mount sd card .(tried formatting sd card with sdformatter)
5.Don't have a proper backup of my phone.
6.Can't extract downloaded .kdz files to get the boot.img and recovery.img files (tried using lg p970 rom converter, optimus L9 image extractor and lg extract)
HELP
1) Does anyone have extracted .kdz for e988 that has split boot image ?
2)How can i fix E:failed to mount /sdcard error.
3)How do i get to download mode in e988 ? is it possible that i deleted the mode ?
sd091989 said:
Hi there, I recently bought an used unlocked LG G PRO E988 (made in korea) version. I rooted it. I tried to flash a custom rom but got stuck in boot loop with a security warning saying "SECURE booting ERROR!! Cause: boot certification verify" But while booting if I kept the volume up and power botton pressed it would give me "SECURE booting ERROR!! Device is unlocked so booting success" , However i could not get into the download mode no matter which ever key combination i tried. Finally pressing the volume up ,home key and power botton at the same time while putting back the battery on i ran into recovery mode and flashed a new rom "sphinx" and it was working fine, though I kept getting the "SECURE booting ERROR!! Device is unlocked so booting success" while booting up. I installed the Philz touch recovery while installing sphinx rom but day before yesterday I wanted to install the default cwm recovery and flash sphinx again with less apps,so from the recovery mode i wiped dev cache,wiped cache partion (and i think i wiped data/factory reset as well ) installed the sphinx rom again and rebooted from sphinx installation screen where i need to check a sqaure box to reboot. but my phone got stuck in boot loop again and with the same security warning "SECURE booting ERROR!! Cause: boot certification verify" but this time pressing the volume up and power button while connecting usb or putting back the battery didn't change the security warning to "SECURE booting ERROR!! Device is unlocked so booting success" neither could i get into my recovery mode. And i have always failed to log into download mode. I read almost all the threads about how to get into g pro download mode but never succeed. The only screen i was getting besides "hard reset" and "boot logo with security warning" was a screen with this message "Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." which would eventually take me to the boot loop again if i kept pressing the power button. sigh ! And at this point my phone was not being detected by my pc. I tried "[GUIDE] Optimus G Pro Full Hard Brick fix" by ricanares, but i couldnt get to download mode so the process failed for me After searching for hours and reading tutorials i found out about pdanet drivers and mtk droid tools. which finally detected my phone in pc only when the creen " Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." appears. Using mtk droid tools i tried to use a boot image (from an extracted .tot file)and recovery(from same .tot file) but i was getting an error saying no split boot image found.Tried using extracting a .tot file and sideloading the recovery.bin and boot.bin .Tried pushin and sideloading cusom recovery.apk files and all efforts in vein. For any files i send using sideload my phone shows an error "E:footer is wrong ; E: signature verification failed" Using mtk droid tools i could enter into a recovery mode but i dont think it is the cwm recovery mode. it has fewer options. I am so lost at this point ! I need some expert help ...
1) Does anyone have an original .kdz file for e988 (i believe its E98820b_00.kdz) or extracted .kdz that has split boot image ?
2)How can i fix E:failed to mount /sdcard error.
3)How do i get to download mode in e988 ? is it possible that i deleted the mode ?
Click to expand...
Click to collapse
"However i could not get into the download mode no matter which ever key combination i tried."
Have you tried:
1) remove battery
2) hold down both volume buttons and power button
3) insert power cord while keeping buttons held down
4) download mode is yours to cherish??
And for once you get into download mode: your KDZ! (or more here)
From there to go here and do more things. Things cannot be left undone. They hate that.
" SECURE booting ERROR!! Device is unlocked so booting success"
This is normal once you install a custom recovery. As long as your phone works, ignore.
culot said:
"However i could not get into the download mode no matter which ever key combination i tried."
Have you tried:
1) remove battery
2) hold down both volume buttons and power button
3) insert power cord while keeping buttons held down
4) download mode is yours to cherish??
And for once you get into download mode: your KDZ! (or more here)
From there to go here and do more things. Things cannot be left undone. They hate that.
" SECURE booting ERROR!! Device is unlocked so booting success"
This is normal once you install a custom recovery. As long as your phone works, ignore.
Click to expand...
Click to collapse
Thanks for your response. Yes i tried that but didn't work. I tried with and without battery both. actually tried numerous times.Only the soft keys keep flashing and nothing else happen. But i will give it a shot again. Plus the secure booting error has changed to "SECURE booting ERROR!! Cause: boot certification verify"-- is it just because I am back to stock recovery ? If only i could get into download mode life would have been a lot easier !! (finger crossed)
sd091989 said:
Thanks for your response. Yes i tried that but didn't work. I tried with and without battery both. actually tried numerous times.Only the soft keys keep flashing and nothing else happen. But i will give it a shot again. Plus the secure booting error has changed to "SECURE booting ERROR!! Cause: boot certification verify"-- is it just because I am back to stock recovery ? If only i could get into download mode life would have been a lot easier !! (finger crossed)
Click to expand...
Click to collapse
Still boned? The LG Support Tool worked for me once, when I was in a similar situation way back last month when I first began smartphoning.
I was in this *exact* same situation after trying to flash my first ROMs and recovery stuff, but I don't remember how I got out of it. :| ACk!
Yupp still stuck . Will try again later tonigh. Didn't get a chance to sit with it the whole day. Hoping for the best !!
sd091989 said:
Yupp still stuck . Will try again later tonigh. Didn't get a chance to sit with it the whole day. Hoping for the best !!
Click to expand...
Click to collapse
Oh! One thing to remember: always plug your USB cable directly into your computers motherboard USB ports, and avoid plugging into USB hub ports (like via a monitor or keyboard). If a desktop: that also means don't use the ports on your computer system. always use the rear ports that plug directly into your motherboard.
(A couple of times I was able to flash a stock TOT/KDZ via the USB hub on my monitor, but that is not a feat that is repeatable for me.)
This makes *all* the difference for me.
culot said:
Oh! One thing to remember: always plug your USB cable directly into your computers motherboard USB ports, and avoid plugging into USB hub ports (like via a monitor or keyboard). If a desktop: that also means don't use the ports on your computer system. always use the rear ports that plug directly into your motherboard.
(A couple of times I was able to flash a stock TOT/KDZ via the USB hub on my monitor, but that is not a feat that is repeatable for me.)
This makes *all* the difference for me.
Click to expand...
Click to collapse
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
sd091989 said:
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
Click to expand...
Click to collapse
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
bagslayer said:
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
Click to expand...
Click to collapse
How do you get into download mode ?
sd091989 said:
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
Click to expand...
Click to collapse
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
bagslayer said:
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
Click to expand...
Click to collapse
LGFlashtool.exe says battery is empty?
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
LGFlashtool.exe says battery is empty?
Click to expand...
Click to collapse
LG Mobile Support tool says battery is empty
bagslayer said:
LG Mobile Support tool says battery is empty
Click to expand...
Click to collapse
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
Yes I can actually get into shell using adb. and my device is recognized as an adb device in device manager. If u can walk me into rooting through adb that would be awesome. specially if i could install a cusom recovery. I spent a bit of time yesterday looking into the files in my phone through adb. tried to change the default.prop file , and push in a custom recovery, but no luck. and i could be wrong but I think for some reason my internal storage (/sdcard) is not being mounted.and same for my external sd card.
But i highly appreciate your response dear Thanks alot for looking into it.
Click to expand...
Click to collapse
culot said:
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
Click to expand...
Click to collapse
Yes I can actually get into shell using adb. and my device is recognized as an adb device in device manager. If u can walk me into rooting through adb that would be awesome. specially if i could install a cusom recovery. I spent a bit of time yesterday looking into the files in my phone through adb. tried to change the default.prop file , and push in a custom recovery, but no luck. and i could be wrong but I think for some reason my internal storage (/sdcard) is not being mounted.and same for my external sd card.
But i highly appreciate your response dear Thanks alot for looking into it.
SO after trying to install the root.zip I tried running nifty.bat . And this is the error i get.
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
LGFlashtool.exe says battery is empty?
Click to expand...
Click to collapse
culot said:
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
Click to expand...
Click to collapse
sd091989 said:
SO after trying to install the root.zip I tried running nifty.bat . And this is the error i get.
Click to expand...
Click to collapse
wow that is such a mean one :C "It doesnt work so we never met okay?" srsly who would do that >.>
bagslayer said:
wow that is such a mean one :C "It doesnt work so we never met okay?" srsly who would do that >.>
Click to expand...
Click to collapse
No doubt, what kind of jerkoff would do that!

Bricked D855 - LED flashing red & blue

Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Hi, guys,
Download Mode still works.
Using LG Tool, the KDZ method did not work, but looks like the TOT+DLL mode works.
Unfortunately, I could not find the files for my specific model D855P.
The tool recognizes the phone at COM41, but the files for D855 are not suitable.
Anybody know where I can find the TOT and DLL?
Thank you!!!
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=668394
Visit this site. Hope, you can find something for your device.
---------- Post added at 04:39 PM ---------- Previous post was at 04:38 PM ----------
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
It's a google search for your required firmware. Try it.
https://www.google.com.pk/search?q=...rome..69i57&sourceid=chrome&es_sm=93&ie=UTF-8
Thank you very much for the help.
Unfortunately I did not found the correct TOT and DLL for D855P, but the KDZ file worked.
I changed the Mode option on LG Flash Tool from DIAG to Emergency and the flash did the trick.
Now I'll try to upgrade to stock 6.0, root, install TWRP and than CM13.
Thanks, guys.
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/development/boot-verification-failed-secure-boot-t3337280
milance92 said:
http://forum.xda-developers.com/lg-g3/development/boot-verification-failed-secure-boot-t3337280
Click to expand...
Click to collapse
Thanks, man!
The flash of the KDZ file fixed this error, but it's always good to have this fix.
At this very moment I am ready to root my new Android 6.0 Stock

lg g3 d855 i can't enter to twrp

hi everyone my problem is i tried to flash my phone with a new rom but accidentally i wiped all the phone so no OS ! after that i enter twrp again and i clicked to recovery so my phone shut down i tried again with fastboot here what it show to me first logo lg then data factory reset ( i enter yes ,yes) then the logo of battery 0% appear . what should i do ?
problem solved now i can go to TWRP but every time i try to flash the rom an error came out invalid zip file i tried different rom and always the same error any help thanks

Categories

Resources