Hi there, I recently bought an used unlocked LG G PRO E988 (made in korea) version. I rooted it. I tried to flash a custom rom but got stuck in boot loop with a security warning saying "SECURE booting ERROR!! Cause: boot certification verify" But while booting if I kept the volume up and power botton pressed it would give me "SECURE booting ERROR!! Device is unlocked so booting success" , However i could not get into the download mode no matter which ever key combination i tried. Finally pressing the volume up ,home key and power botton at the same time while putting back the battery on i ran into recovery mode and flashed a new rom "sphinx" and it was working fine, though I kept getting the "SECURE booting ERROR!! Device is unlocked so booting success" while booting up. I installed the Philz touch recovery while installing sphinx rom but day before yesterday I wanted to install the default cwm recovery and flash sphinx again with less apps,so from the recovery mode i wiped dev cache,wiped cache partion (and i think i wiped data/factory reset as well ) installed the sphinx rom again and rebooted from sphinx installation screen where i need to check a sqaure box to reboot. but my phone got stuck in boot loop again and with the same security warning "SECURE booting ERROR!! Cause: boot certification verify" but this time pressing the volume up and power button while connecting usb or putting back the battery didn't change the security warning to "SECURE booting ERROR!! Device is unlocked so booting success" neither could i get into my recovery mode. And i have always failed to log into download mode. I read almost all the threads about how to get into g pro download mode but never succeed. The only screen i was getting besides "hard reset" and "boot logo with security warning" was a screen with this message "Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." which would eventually take me to the boot loop again if i kept pressing the power button. sigh ! And at this point my phone was not being detected by my pc. I tried "[GUIDE] Optimus G Pro Full Hard Brick fix" by ricanares, but i couldnt get to download mode so the process failed for me After searching for hours and reading tutorials i found out about pdanet drivers and mtk droid tools. which finally detected my phone in pc only when the creen " Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." appears. Using mtk droid tools i tried to use a boot image (from an extracted .tot file)and recovery(from same .tot file) but i was getting an error saying no split boot image found.Tried using extracting a .tot file and sideloading the recovery.bin and boot.bin .Tried pushin and sideloading cusom recovery.apk files and all efforts in vein. For any files i send using sideload my phone shows an error "E:footer is wrong ; E: signature verification failed" Using mtk droid tools i could enter into a recovery mode but i dont think it is the cwm recovery mode. it has fewer options. I am so lost at this point ! I need some expert help ...
Things working
1. Boots into stock recovery using mtk tools.
2. Pc recognizes device as LG Android net phone
3.Mtk tools recognizes the device as LG E988
4.Can use adb sideload options to send files to phone in recovery mode (but phone outputs error as 1st attached image )
5.In recovery mode I can see and go into /cache folder using update from cache option.but theres nothing there
THINGS NOT WORKING
1.Doesnt Boot into recovery mode using physical buttons
2.Doesnt Boot into download mode
3.Cant get into fastboot mode with adb commands
4.Doesnt mount sd card .(tried formatting sd card with sdformatter)
5.Don't have a proper backup of my phone.
6.Can't extract downloaded .kdz files to get the boot.img and recovery.img files (tried using lg p970 rom converter, optimus L9 image extractor and lg extract)
HELP
1) Does anyone have extracted .kdz for e988 that has split boot image ?
2)How can i fix E:failed to mount /sdcard error.
3)How do i get to download mode in e988 ? is it possible that i deleted the mode ?
sd091989 said:
Hi there, I recently bought an used unlocked LG G PRO E988 (made in korea) version. I rooted it. I tried to flash a custom rom but got stuck in boot loop with a security warning saying "SECURE booting ERROR!! Cause: boot certification verify" But while booting if I kept the volume up and power botton pressed it would give me "SECURE booting ERROR!! Device is unlocked so booting success" , However i could not get into the download mode no matter which ever key combination i tried. Finally pressing the volume up ,home key and power botton at the same time while putting back the battery on i ran into recovery mode and flashed a new rom "sphinx" and it was working fine, though I kept getting the "SECURE booting ERROR!! Device is unlocked so booting success" while booting up. I installed the Philz touch recovery while installing sphinx rom but day before yesterday I wanted to install the default cwm recovery and flash sphinx again with less apps,so from the recovery mode i wiped dev cache,wiped cache partion (and i think i wiped data/factory reset as well ) installed the sphinx rom again and rebooted from sphinx installation screen where i need to check a sqaure box to reboot. but my phone got stuck in boot loop again and with the same security warning "SECURE booting ERROR!! Cause: boot certification verify" but this time pressing the volume up and power button while connecting usb or putting back the battery didn't change the security warning to "SECURE booting ERROR!! Device is unlocked so booting success" neither could i get into my recovery mode. And i have always failed to log into download mode. I read almost all the threads about how to get into g pro download mode but never succeed. The only screen i was getting besides "hard reset" and "boot logo with security warning" was a screen with this message "Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." which would eventually take me to the boot loop again if i kept pressing the power button. sigh ! And at this point my phone was not being detected by my pc. I tried "[GUIDE] Optimus G Pro Full Hard Brick fix" by ricanares, but i couldnt get to download mode so the process failed for me After searching for hours and reading tutorials i found out about pdanet drivers and mtk droid tools. which finally detected my phone in pc only when the creen " Recovery mode,Using this mode, service center can back up and recover your data. Press and hold the POWER key more than 8 seconds to reboot and continue using phone." appears. Using mtk droid tools i tried to use a boot image (from an extracted .tot file)and recovery(from same .tot file) but i was getting an error saying no split boot image found.Tried using extracting a .tot file and sideloading the recovery.bin and boot.bin .Tried pushin and sideloading cusom recovery.apk files and all efforts in vein. For any files i send using sideload my phone shows an error "E:footer is wrong ; E: signature verification failed" Using mtk droid tools i could enter into a recovery mode but i dont think it is the cwm recovery mode. it has fewer options. I am so lost at this point ! I need some expert help ...
1) Does anyone have an original .kdz file for e988 (i believe its E98820b_00.kdz) or extracted .kdz that has split boot image ?
2)How can i fix E:failed to mount /sdcard error.
3)How do i get to download mode in e988 ? is it possible that i deleted the mode ?
Click to expand...
Click to collapse
"However i could not get into the download mode no matter which ever key combination i tried."
Have you tried:
1) remove battery
2) hold down both volume buttons and power button
3) insert power cord while keeping buttons held down
4) download mode is yours to cherish??
And for once you get into download mode: your KDZ! (or more here)
From there to go here and do more things. Things cannot be left undone. They hate that.
" SECURE booting ERROR!! Device is unlocked so booting success"
This is normal once you install a custom recovery. As long as your phone works, ignore.
culot said:
"However i could not get into the download mode no matter which ever key combination i tried."
Have you tried:
1) remove battery
2) hold down both volume buttons and power button
3) insert power cord while keeping buttons held down
4) download mode is yours to cherish??
And for once you get into download mode: your KDZ! (or more here)
From there to go here and do more things. Things cannot be left undone. They hate that.
" SECURE booting ERROR!! Device is unlocked so booting success"
This is normal once you install a custom recovery. As long as your phone works, ignore.
Click to expand...
Click to collapse
Thanks for your response. Yes i tried that but didn't work. I tried with and without battery both. actually tried numerous times.Only the soft keys keep flashing and nothing else happen. But i will give it a shot again. Plus the secure booting error has changed to "SECURE booting ERROR!! Cause: boot certification verify"-- is it just because I am back to stock recovery ? If only i could get into download mode life would have been a lot easier !! (finger crossed)
sd091989 said:
Thanks for your response. Yes i tried that but didn't work. I tried with and without battery both. actually tried numerous times.Only the soft keys keep flashing and nothing else happen. But i will give it a shot again. Plus the secure booting error has changed to "SECURE booting ERROR!! Cause: boot certification verify"-- is it just because I am back to stock recovery ? If only i could get into download mode life would have been a lot easier !! (finger crossed)
Click to expand...
Click to collapse
Still boned? The LG Support Tool worked for me once, when I was in a similar situation way back last month when I first began smartphoning.
I was in this *exact* same situation after trying to flash my first ROMs and recovery stuff, but I don't remember how I got out of it. :| ACk!
Yupp still stuck . Will try again later tonigh. Didn't get a chance to sit with it the whole day. Hoping for the best !!
sd091989 said:
Yupp still stuck . Will try again later tonigh. Didn't get a chance to sit with it the whole day. Hoping for the best !!
Click to expand...
Click to collapse
Oh! One thing to remember: always plug your USB cable directly into your computers motherboard USB ports, and avoid plugging into USB hub ports (like via a monitor or keyboard). If a desktop: that also means don't use the ports on your computer system. always use the rear ports that plug directly into your motherboard.
(A couple of times I was able to flash a stock TOT/KDZ via the USB hub on my monitor, but that is not a feat that is repeatable for me.)
This makes *all* the difference for me.
culot said:
Oh! One thing to remember: always plug your USB cable directly into your computers motherboard USB ports, and avoid plugging into USB hub ports (like via a monitor or keyboard). If a desktop: that also means don't use the ports on your computer system. always use the rear ports that plug directly into your motherboard.
(A couple of times I was able to flash a stock TOT/KDZ via the USB hub on my monitor, but that is not a feat that is repeatable for me.)
This makes *all* the difference for me.
Click to expand...
Click to collapse
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
sd091989 said:
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
Click to expand...
Click to collapse
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
bagslayer said:
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
Click to expand...
Click to collapse
How do you get into download mode ?
sd091989 said:
Hey ,thanks for the tip. I am using the mobo usb ports. So today i was able to flash pacman rom (its the only one that i can flash in adb sideload actually... couldnt flash the stock rom for signaature error and footer is wrong error) But now getting this new error "assert failed run_program("/system/bin/loki.sh") ==0 )"
E: Error in /tmp/update.zip
(status 7)
p.s- my android version got updated to 4.4.4 in the process !
I feel i am getting close to retrieve my phone back to normal ; yet so far. :S
Click to expand...
Click to collapse
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
bagslayer said:
my phone can get into download mode but stuck at boot loop, i cant use lg tool to recover cuz it says my battery is empty but it is fully charged :/
kdz tool aint working cuz it keeps aborting :/
Click to expand...
Click to collapse
LGFlashtool.exe says battery is empty?
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
LGFlashtool.exe says battery is empty?
Click to expand...
Click to collapse
LG Mobile Support tool says battery is empty
bagslayer said:
LG Mobile Support tool says battery is empty
Click to expand...
Click to collapse
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
Yes I can actually get into shell using adb. and my device is recognized as an adb device in device manager. If u can walk me into rooting through adb that would be awesome. specially if i could install a cusom recovery. I spent a bit of time yesterday looking into the files in my phone through adb. tried to change the default.prop file , and push in a custom recovery, but no luck. and i could be wrong but I think for some reason my internal storage (/sdcard) is not being mounted.and same for my external sd card.
But i highly appreciate your response dear Thanks alot for looking into it.
Click to expand...
Click to collapse
culot said:
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
Click to expand...
Click to collapse
Yes I can actually get into shell using adb. and my device is recognized as an adb device in device manager. If u can walk me into rooting through adb that would be awesome. specially if i could install a cusom recovery. I spent a bit of time yesterday looking into the files in my phone through adb. tried to change the default.prop file , and push in a custom recovery, but no luck. and i could be wrong but I think for some reason my internal storage (/sdcard) is not being mounted.and same for my external sd card.
But i highly appreciate your response dear Thanks alot for looking into it.
SO after trying to install the root.zip I tried running nifty.bat . And this is the error i get.
culot said:
The Why: You can't flash that via the stock recovery. You need to use FreeGee to flash CWM or TWRP.
You can get your system into stock recovery: this is good! Does ADB recognize? If not check Windows drivers. If ADB recognizes it, and you can 'adb shell' into it, maybe I could walk you into rooting and installing a custom recovery via the shell?
1) If not already, have ADB at hand. It is your best friend.
---------- Post added at 06:58 PM ---------- Previous post was at 06:56 PM ----------
LGFlashtool.exe says battery is empty?
Click to expand...
Click to collapse
culot said:
Dude, you are so in the wrong program:
LG Flash Tool 1.8 -- this is what handles your TOTs.
Err, wait, you're on E988? Nevermind, no TOTs for you. I've only flashed KDZ a few times, and I don't recall off hand. :| I think it was this one that worked for me: here.
Click to expand...
Click to collapse
sd091989 said:
SO after trying to install the root.zip I tried running nifty.bat . And this is the error i get.
Click to expand...
Click to collapse
wow that is such a mean one :C "It doesnt work so we never met okay?" srsly who would do that >.>
bagslayer said:
wow that is such a mean one :C "It doesnt work so we never met okay?" srsly who would do that >.>
Click to expand...
Click to collapse
No doubt, what kind of jerkoff would do that!
Related
Hey everyone. I know there are already a few threads with boot loop animations, and am having difficulties finding the same situation as what I'm going through. Here is what the phone used to have before it randomly started looping:
Rooted - with Stock rom, using ClockwordMod Recovery 5.5.0.2
Used Go Launcher Theme ( if that even matters )
No additional roms installed or anything, the phone is 3 months old.
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Here's what screens I can get to:
1. Hold vol up/down while holding power ( the little android with its belly open, and the options Start - Restart Bootloader - Recovery mode - Power Off )
2. Hold vol down - ODIN mode, with the START option only
I can access WMD recovery and factory reset, Try to install my old backup, nothing works at all in that area, no matter what I do.
Can someone advise me a step by step way of getting my computer to recognize my phone, so that I am able to do fastboot, or reflash, or anything to get my phone working again. I can't access my internal memory at all.
It's even possible that I've read too much, and my frustration is getting in the way, if so I apologize! Some guidance would be greatly appreciated!
Thanks in advance of course! I need my phone for business!
Cheers,
Install the drivers on a computer then use fastboot oem unlock. Or just factory reset it from within recovery.
Sent from my Galaxy Nexus using Tapatalk 2 Beta-4
Try my siggy.
I'm not sure about the exact error:
But the link there will get you the correct drivers.
Also, as stated...try to factory reset.
You'll lose your apps/data that way though =/
Hopefully you can get the driver installed and get your computer to recognize.
If so, follow this to back up your apps:
http://forum.xda-developers.com/showthread.php?t=1420351
Have exactly the same setup as you (rooted/stock/CWM) and had the animation bootloop - animation would just loop until a battery pull.
Only thing that solved it was a factory reset from recovery. Been working fine for the 4 weeks since. No need for any reflashing etc. Titanium recoveries have all worked fine as well. Didn't try my Nandroid backup as I thought that may still have the 'fault' built in.
I had a boot loop for every from I tried to flash...wat fixed it was before flashing u need to wipe system data and wipe the cache in the recovery...ie a clean install...then every rom I tried worked...so I think ur missing that crucial step coz it worked for me
Sent from my Galaxy Nexus using Tapatalk
Hey guys, as stated above I've done numerous factory resets, it still seems to boot. I will for sure try to get the drivers installed so my phone is recongised by the computer, but would need step-by-step assistance when doing fastboot, or whatever the next step is.
Looking for more help though! Keep em coming!
?
Any other ideas?
Thanks!
Ok guys, so here's where I'm at now. I've used Jubakuba's sticky link, located here:
http://forum.xda-developers.com/showthread.php?t=1529058
Everything is able to be recognized up to the point where it says "Put the su.zip on your phone."
Since I cannot access my phone contents, since I keep getting this "Unable to open lunfile ( no such file or directory), it does not allow me to add anything to my phone.
I re-installed CWD as stated in the list of things to do, and all that went well. But I have the same issue, I tried factory resetting all that. erase cache, and still stuck with the same issue.
What's my next step now peeps? Looking for a quick answer as I have time to do it tonight!
Edit***
Just tried this trick: but it says it does not recognize the device?? what is going on! Please help someone! Thanks!
Panic Section! (Something is Wrong)
Q: My phone won't boot!
A: The easiest option is to get into recovery and restore a nandroid using the above guide (pull battery to put phone in an off-state if needed).
However, more advanced options are available if you don't have a nandroid available (You're naughty).
Do you have another rom .zip available on your SD card? If so, simply use the above guide for installing a rom to get you booting again.
If not, you can download one on your PC. Boot into fastboot (the green Android with open chest menu).
Move the .zip to the C:\android-sdk-windows\platform-tools folder.
Open ADB.
Change the NAMEOFZIP.zip below to the correct file name...and perform the action.
Surely your computer recognizes your phone. Otherwise how were you able to unlock the bootloader and flash the recovery?
And I've never seen that error message before. It doesn't even make any sense to me. Where are you seeing it? On your phone or on your computer? And in what context? What are you trying to do when it shows up?
If your phone isn't booting I'm not sure that you can copy any files to it yet. (Maybe you can use adb in clockworkmod? I'm not sure) What I do know you can do is flash the stock ROM and start over.
Download the image from Google here:
http://code.google.com/android/nexus/images.html
Here's a instructions for the GSM version:
http://forum.xda-developers.com/showthread.php?t=1366806
For the Verizon version, I can't find the thread at the moment but you just replace the filenames and also there's 2 radios to flash so:
fastboot flash radio *filename*
fastboot reboot-bootloader
fastboot flash radio-cmda *filename*
"Unable to open lunfile ( no such file or directory) appears on the phone, in CWD mode, when trying to attempt "mount Usb" to be able to access my internal storage .
I am attempting your thoughts right now.
I will post with results
Ok I tried to do this step. This is the outcome I received on the computer after even typing the first step:
'fastboot-windows' is not recognized as aninternal or external command, operable program or batch file.
A thing to stress, I'm not sure how to do step 1: 1) Take a Nandroid Backup if you have CWM installed.
EDIT***
GREAT NEWS!
used this setup!
http://android.modaco.com/topic/348161-01-feb-r4-superboot-rooting-the-gsm-lte-galaxy-nexus/
and it worked!
Thank you everyone! Going to play with my phone and make sure it all works!
Macinshak said:
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Click to expand...
Click to collapse
the problem is when that happen?? when ur phone is booted and u plug the usb cable to ur pc? or when u are under recovery and want mount the usb mass storage? the second one doesn't work
hi
I have a lg optimus g pro and i rooted it using towelroot and then I installed "LGRecovery_GPRO_GK.apk" to flash the TWRP 2.8.1 recovery, then i wanted to flash CM12. I got this: "error executing updater binary"
I tried this: http://forum.xda-developers.com/showthread.php?t=2620733 but not worked.
After that I read a thread here that someone said install older version of TWRP, I wanted to install this: http://forum.xda-developers.com/showthread.php?t=2455828
Now I just see the TWRP logo and somethings come and phone turns off. And it seems that I don't have any system, so the phone doesn't load. I tried factory reset but not worked.
please help me :crying::crying:
Put your phone in download mode, you can do this by pulling the battery out, putting it back in, keep the phone off, then hold the volume up and down buttons while plugging in the usb, then grab lg flash tools and a .tot file and flash it to your phone, these can be easily found with a quick. Google search, the .tot files are sometimes ziped but they are big, arround 2gb, so you may want to keep the phone off while downloading one, i hope that was clear enough,
SaidJan said:
hi
I have a lg optimus g pro and i rooted it using towelroot and then I installed "LGRecovery_GPRO_GK.apk" to flash the TWRP 2.8.1 recovery, then i wanted to flash CM12. I got this: "error executing updater binary"
I tried this: http://forum.xda-developers.com/showthread.php?t=2620733 but not worked.
After that I read a thread here that someone said install older version of TWRP, I wanted to install this: http://forum.xda-developers.com/showthread.php?t=2455828
Now I just see the TWRP logo and somethings come and phone turns off. And it seems that I don't have any system, so the phone doesn't load. I tried factory reset but not worked.
please help me :crying::crying:
Click to expand...
Click to collapse
Go to download mode & flash stock lkdz,then install recovery then you can go for any rom..
THC Butterz said:
Put your phone in download mode, you can do this by pulling the battery out, putting it back in, keep the phone off, then hold the volume up and down buttons while plugging in the usb, then grab lg flash tools and a .tot file and flash it to your phone, these can be easily found with a quick. Google search, the .tot files are sometimes ziped but they are big, arround 2gb, so you may want to keep the phone off while downloading one, i hope that was clear enough,
Click to expand...
Click to collapse
asingha94 said:
Go to download mode & flash stock lkdz,then install recovery then you can go for any rom..
Click to expand...
Click to collapse
The problem is that I got a .tot file, but flash tools just wants a .kdz file which I didn't find.
Also I searched a lot about it. I have win10 64bit, and i don't have usb2 port. but flash tool and b2capp doesn't see my phone because of driver (that can't work on usb3 and win8 and 10. 64bit)
I wanted to install win7 32bit, but it gives me an error regarding UEFI, and if i want to change it, i should wipe all my hard disk
SaidJan said:
The problem is that I got a .tot file, but flash tools just wants a .kdz file which I didn't find.
Also I searched a lot about it. I have win10 64bit, and i don't have usb2 port. but flash tool and b2capp doesn't see my phone because of driver (that can't work on usb3 and win8 and 10. 64bit)
I wanted to install win7 32bit, but it gives me an error regarding UEFI, and if i want to change it, i should wipe all my hard disk
Click to expand...
Click to collapse
Download the kdz from here & follow the procedure..
http://forum.xda-developers.com/showthread.php?t=2797190
http://lg-phone-firmware.com/index.php?id_mod=25
asingha94 said:
Download the kdz from here & follow the procedure..
http://forum.xda-developers.com/showthread.php?t=2797190
http://lg-phone-firmware.com/index.php?id_mod=25
Click to expand...
Click to collapse
I put my phone on Download mode (vol up,down+usb plugin)
lg flash tools opens lg support tool and it gives me this error: "The phone is disconnected from pc. connect the usb cable and wait a moment. press the retry button to resume the setting analysis process."
I have windows 10 64-bits. and i think this is the problem. and there is no way to install win 32 bits unless I clean all my hard drive which i don't want. :crying::crying:
I tried my phone on a win7 32bits, and it worked. but that pc was so slow, it took 50 minutes to install drivers, and then I had to go. so I left it.
Is there any way to install recovery from adb? or rom?
I can get into recovery but the screen is black, when i get adb push ls, it shows me folders. it means it's connected. the problem is that i can't mount data. gives me "no such file or folder"
SaidJan said:
Is there any way to install recovery from adb? or rom?
I can get into recovery but the screen is black, when i get adb push ls, it shows me folders. it means it's connected. the problem is that i can't mount data. gives me "no such file or folder"
Click to expand...
Click to collapse
you could sideload a recovery, you can get twrp or phillz in zip forms...
http://forum.xda-developers.com/showthread.php?t=2552611
flash with "adb sideload (name of .zip file)"
THC Butterz said:
you could sideload a recovery, you can get twrp or phillz in zip forms...
http://forum.xda-developers.com/showthread.php?t=2552611
flash with "adb sideload (name of .zip file)"
Click to expand...
Click to collapse
I couldn't acess adb mode. The only way was to go to download mode in a windows 32 bits and fix it with lg flash tool with a .tot file.
Thank you
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Hi, guys,
Download Mode still works.
Using LG Tool, the KDZ method did not work, but looks like the TOT+DLL mode works.
Unfortunately, I could not find the files for my specific model D855P.
The tool recognizes the phone at COM41, but the files for D855 are not suitable.
Anybody know where I can find the TOT and DLL?
Thank you!!!
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
http://bbs.gaodi.net/forum.php?mod=viewthread&tid=668394
Visit this site. Hope, you can find something for your device.
---------- Post added at 04:39 PM ---------- Previous post was at 04:38 PM ----------
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
It's a google search for your required firmware. Try it.
https://www.google.com.pk/search?q=...rome..69i57&sourceid=chrome&es_sm=93&ie=UTF-8
Thank you very much for the help.
Unfortunately I did not found the correct TOT and DLL for D855P, but the KDZ file worked.
I changed the Mode option on LG Flash Tool from DIAG to Emergency and the flash did the trick.
Now I'll try to upgrade to stock 6.0, root, install TWRP and than CM13.
Thanks, guys.
gabu8balls said:
Hello, guys!
I stupidly bricked my D855 trying to install CM 13.
It was on Stock Lollipop.
Now it only flashes red and blue led. No system and no recovery.
This is exactly what I did:
1. root
2. install TWRP 3.0.0.0
3. reboot to Recovery mode
4. completely format all partitions
5. upload CM13.zip and Gapps.zip
6. try to flash CM13
Here I got an error about the Baseband version and the flash did not started.
It was version 20B I guess.
7. Search Google about the error and found an update to version 30B
8. Download the firmware.zip and upload to phone
9. Flash firmware.zip
10. reboot
This is where I got stuck.
I thought it would boot to recovery again, but it is completely dead.
When I power the phone on, I can see the LG logo with this error at the top left:
ERROR : boot certification verify
[660] ------------------
[660] Secure booting Error!
[660] Cause : Boot certification verify
[660] -----------------
And then the screen turns off and the led flashes red and blue.
If I try to push Power and Volume Down, I got the same thing.
If I try to push Power and Volume Up, the screen turns off, but the led don't flash.
If I push only Volume Down the phone reboots to the LG logo.
LG Flash Tool does not detect the phone.
I've searched on Google, YouTube and here on XDA and did not found anything.
It was stupid to format all partitions, I know.
Is there a way to recover the phone or I should buy another one?
Thank you very much for the help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/development/boot-verification-failed-secure-boot-t3337280
milance92 said:
http://forum.xda-developers.com/lg-g3/development/boot-verification-failed-secure-boot-t3337280
Click to expand...
Click to collapse
Thanks, man!
The flash of the KDZ file fixed this error, but it's always good to have this fix.
At this very moment I am ready to root my new Android 6.0 Stock
Hello,
Woke up to my phone turned off and upon turning it on showing the Your Device is corrupt error and after 30 seconds a reboot happens automatically. I remember I had a "low disk space" alert for a few days. I think there is absolutely no free disc space. I can't access recovery as when I hold down any buttons it turns on and quickly shuts down within 1 second upon the first screen showing.
Don't know what to do. I had many important files on it as well.
Any tips would be massively appreciated.
Why are we facing this issue?
+1
Any solution for this?
My device is also facing the same issue.
Mangekyō_1 said:
Hello,
Woke up to my phone turned off and upon turning it on showing the Your Device is corrupt error and after 30 seconds a reboot happens automatically. I remember I had a "low disk space" alert for a few days. I think there is absolutely no free disc space. I can't access recovery as when I hold down any buttons it turns on and quickly shuts down within 1 second upon the first screen showing.
Don't know what to do. I had many important files on it as well.
Any tips would be massively appreciated.
Click to expand...
Click to collapse
Factory reset is the only option!!
connect your phone to pc in normal charging mode and then try booting to recovery mode (power&vol+), you should be able to boot to recovery.
you will loose all your data.
Sadly this is clearly not working. There is quite a few posts on the nokia forum relating to this and the android 10 update bricking the device. But so far there is no solution and as well as that, the recovery mode is not available.
There appears to be some opportunists on youtube that are exploiting this to profit to fix the device, but that is no real help.
So I'm also in the club of a bricked Nokia (well its my mothers phone) that has remained stock the entire time. (it's a good thing I kept my Nexus 4!)
Fryingsheep said:
Sadly this is clearly not working. There is quite a few posts on the nokia forum relating to this and the android 10 update bricking the device. But so far there is no solution and as well as that, the recovery mode is not available.
There appears to be some opportunists on youtube that are exploiting this to profit to fix the device, but that is no real help.
So I'm also in the club of a bricked Nokia (well its my mothers phone) that has remained stock the entire time. (it's a good thing I kept my Nexus 4!)
Click to expand...
Click to collapse
Try booting in fastboot .
Poweroff your phone .
Connect to pc .
Press (vol- & power) until the logo appears with a little fastboot written in left bottom.
If you are able to boot into fastboot then tell me I will give you the solution.
bx2_nero said:
Try booting in fastboot .
Poweroff your phone .
Connect to pc .
Press (vol- & power) until the logo appears with a little fastboot written in left bottom.
If you are able to boot into fastboot then tell me I will give you the solution.
Click to expand...
Click to collapse
Yeah, it's refusing to go into fastboot, just keeps going in a cycle back to the corrupt error again
Fryingsheep said:
Yeah, it's refusing to go into fastboot, just keeps going in a cycle back to the corrupt error again
Click to expand...
Click to collapse
Did you connected to pc before trying to boot into fastboot.
bx2_nero said:
Did you connected to pc before trying to boot into fastboot.
Click to expand...
Click to collapse
Yeah, thats when it goes into cycle even more so, android one screen comes up, quick flash of the corrupt error, then it starts again.
Fryingsheep said:
Yeah, thats when it goes into cycle even more so, android one screen comes up, quick flash of the corrupt error, then it starts again.
Click to expand...
Click to collapse
Join this and report your problem.
t.me/HikariCalyxFIH
Sadly it is lifeless now, believe the battery has ran out and the phone refuses to charge in this state
solution
Hello i had the same problem , i recovered my 5.1 plus this worked for me maybe it works for you too.
First download sp flash tool and firmware file i have 5.1 plus world wide version and dowload the image PDA-209B-0-00WW-B06 for x5 use the image with cn not ww.
Unzip flash tool and the image PDA-209B-0-00WW-B06.
Run sp flash tool load the scatter file from the image, then unthick the box sutinfo, systeminfo_a & cda_a and hit dowload, conect youre phone holding volume up and down until it starts download.
Wait until it finish and the green box wit ok appears. Now the phone will start and after android one logo,the robot image and no comand will show up, click power button then quick on volume up and recovery menu shows.
Now you need a micro sd card and OTA update file download the Android 10 Update (V3.11A) : ace851ea59294177f677018648d6c0614317510e.zip.
Copy the zip file on the micro sd then insert it on the phone. From the recovery menu choose update from sd card then select : ace851ea59294177f677018648d6c0614317510e.zip
The update will start wait untill recovery says succesful it will take some time be patient. After that reboot all done youre device should work. Its my first post i cant post links sorry the sistem wont let me.
piticulrau said:
Hello i had the same problem , i recovered my 5.1 plus this worked for me maybe it works for you too.
First download sp flash tool and firmware file i have 5.1 plus world wide version and dowload the image PDA-209B-0-00WW-B06 for x5 use the image with cn not ww.
Unzip flash tool and the image PDA-209B-0-00WW-B06.
Run sp flash tool load the scatter file from the image, then unthick the box sutinfo, systeminfo_a & cda_a and hit dowload, conect youre phone holding volume up and down until it starts download.
Wait until it finish and the green box wit ok appears. Now the phone will start and after android one logo,the robot image and no comand will show up, click power button then quick on volume up and recovery menu shows.
Now you need a micro sd card and OTA update file download the Android 10 Update (V3.11A) : ace851ea59294177f677018648d6c0614317510e.zip.
Copy the zip file on the micro sd then insert it on the phone. From the recovery menu choose update from sd card then select : ace851ea59294177f677018648d6c0614317510e.zip
The update will start wait untill recovery says succesful it will take some time be patient. After that reboot all done youre device should work. Its my first post i cant post links sorry the sistem wont let me.
Click to expand...
Click to collapse
You left the most important step .
Readback step in SP FlashTool.
Hey folks!
Let me share what worked for me when I solved this issue on a friend's phone.
This guide is dependent on you being able to boot into recovery mode - the screen with the green android robot laying down with a red exclamation mark on top of it.
We'll use recovery mode to sideload an OTA image to the device. Go to the Nokia OTA repository on telegram (search for Nokia OTA repository). Once there search for Nokia 5.1 plus and from the search results look for a full Android 10 OTA image with the April security patch (sorry, can't post links - should be 1.23 GB). Download that file and move it to the root directory on your SD card and then insert your SD card into your device.
Now, boot into recovery mode on your device (there's a key combination that will get you there but I'm not exactly sure what it is - try Power + Volume Up or Power + Volume Down). Once you get to the recovery mode screen, press Power and Volume Up to load the recovery menu. You'll see a bunch of options listed there - the one we're keen on is 'Install zip from SD Card'. Scroll down using the Volume Down button until you get to that option and then press the Power button to select it. You should then be able to select the zip file you downloaded earlier from your SD card. The process should then take a few minutes to complete. If all goes well, you can now reboot your device and Profit!
Good luck!
bx2_nero said:
You left the most important step .
Readback step in SP FlashTool.
Click to expand...
Click to collapse
No i did not use readback , why shoud i? I have lost half a day searching on internet about this problem and i got lucky.
piticulrau said:
No i did not use readback , why shoud i? I have lost half a day searching on internet about this problem and i got lucky.
Click to expand...
Click to collapse
Readback is the most important step when you are flashing stock rom .. it backups all the partitions in a single file which you can use to restore if something goes wrong .. many users have faced issues because they didn't do the readback process . You can check out the guide for downgrade and there is nothing to search about .. if you can access recovery/fastboot then it's very easy to restore . If you can't you will have to flash the stock rom . You can check the guide in Guides thread. You just got lucky .if something went wrong you would have end up bricked up your device bad.
bx2_nero said:
Readback is the most important step when you are flashing stock rom .. it backups all the partitions in a single file which you can use to restore if something goes wrong .. many users have faced issues because they didn't do the readback process . You can check out the guide for downgrade and there is nothing to search about .. if you can access recovery/fastboot then it's very easy to restore . If you can't you will have to flash the stock rom . You can check the guide in Guides thread. You just got lucky .if something went wrong you would have end up bricked up your device bad.
Click to expand...
Click to collapse
Ok , did not know that, ill remember next time if i have same problem. Thank you. Indeed i had no way to enter recovery menu and when trying to flash i got errors the only way i could suucesfuly flash the rom was unticking those 3 boxes , after that the phone entered in recovery but it wasnt able to start normaly it bootloped to the robot with no comand ,so i had to use update from sd because sideload didnt work.
piticulrau said:
Ok , did not know that, ill remember next time if i have same problem. Thank you. Indeed i had no way to enter recovery menu and when trying to flash i got errors the only way i could suucesfuly flash the rom was unticking those 3 boxes , after that the phone entered in recovery but it wasnt able to start normaly it bootloped to the robot with no comand ,so i had to use update from sd because sideload didnt work.
Click to expand...
Click to collapse
Its very lucky that you got it work ... Sometimes this device can be very messy.
---------- Post added at 03:57 AM ---------- Previous post was at 03:56 AM ----------
battystutor said:
Hey folks!
Let me share what worked for me when I solved this issue on a friend's phone.
This guide is dependent on you being able to boot into recovery mode - the screen with the green android robot laying down with a red exclamation mark on top of it.
We'll use recovery mode to sideload an OTA image to the device. Go to the Nokia OTA repository on telegram (search for Nokia OTA repository). Once there search for Nokia 5.1 plus and from the search results look for a full Android 10 OTA image with the April security patch (sorry, can't post links - should be 1.23 GB). Download that file and move it to the root directory on your SD card and then insert your SD card into your device.
Now, boot into recovery mode on your device (there's a key combination that will get you there but I'm not exactly sure what it is - try Power + Volume Up or Power + Volume Down). Once you get to the recovery mode screen, press Power and Volume Up to load the recovery menu. You'll see a bunch of options listed there - the one we're keen on is 'Install zip from SD Card'. Scroll down using the Volume Down button until you get to that option and then press the Power button to select it. You should then be able to select the zip file you downloaded earlier from your SD card. The process should then take a few minutes to complete. If all goes well, you can now reboot your device and Profit!
Good luck!
Click to expand...
Click to collapse
Power + VolUp - Recovery
Power + VolDown - Fastboot
Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin
Leonniar said:
Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin
Click to expand...
Click to collapse
Can you flash full rom with mi flash tool
Rares6567 said:
Can you flash full rom with mi flash tool
Click to expand...
Click to collapse
Already did, it didn't work...
Leonniar said:
Already did, it didn't work...
Click to expand...
Click to collapse
Maybe is some motherboard issues?
I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread
Leonniar said:
I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread
Click to expand...
Click to collapse
There is no volume buttons problem?
If no maybe you should reflash whole phone, fastboot, recovery, all, using edl ig.... I don't have this phone or any Snapdragon phone, so I don't really know....
Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)
Leonniar said:
Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)
Click to expand...
Click to collapse
So then why your phone goes to fastboot?
I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off
Leonniar said:
I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off
Click to expand...
Click to collapse
It seems that this a software bug ig, can you try go to recovery and flash the rom?
I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file
Leonniar said:
I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file
Click to expand...
Click to collapse
So where u downloaded the fastboot rom, there is a recovery rom too :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Be sure u download the recovery rom not fastboot.
Btw use your miui version u had
Tho I'm not 100% sure if you flashed the fastboot rom correctly, did u :
1. Open MiFlashTool : download the tool from here if you don't have it ---> https://xiaomiflashtool.com/
2. Select your rom ( make sure your path to the rom isn't long and the folder/folders don't have long names )
3. Connect your phone
4. Click Refresh ( to make your device appear)
5. And click flash
I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread
Leonniar said:
I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread
Click to expand...
Click to collapse
Ok so to fix the error : go to miflashtool folder and create a new folder called : log
Fixed the start up error, I get the screen that says "Please install driver", I press Install and I get this:
https://prnt.sc/I53g6bs_8i5w
Pressing ok gets me back to the "Please install driver" screen
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Rares6567 said:
It seems that this a software bug ig, can you try go to recovery and flash the rom?
Click to expand...
Click to collapse
flashing miui_APOLLOEEAGlobal_V12.5.4.0.RJDEUXM_451a2324af_11.0.zip from stock recovery is good idea, you can do this from MicroSD card to circumvent any usb issues you are obviously facing on fastboot.
Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
So it worked?
This "error" isn't an "error" so don't worry about it
Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
This error is normal since you are not re-locking the bootloader.
If some functions are inoperative.
Try to flash the same rom (fastboot) that you had when you bought the phone, probably an A11.
Use clean all(flash_all.bat).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/