Related
Okay, Please don't say, "USE THE SEARCH" because i have.. and i've read through countless and countless number's of pointless posts and i'm still really confused..
I am currently rooted and running stock rom with nerarchy's kernal
I want to update to the new gingerbread that was released, but i do not want to lose my root, i know the thread in the android development is just the regular OTA copy of the gingerbread update and that i will lose my root if i use that, but i'm sure by now someone has rooted the update, so can someone point me to the link of the new ROOTED gingerbread update?
Also i see there is a new radio and kernal .. so can someone give me complete instructions on how to fully install the new rooted update, and how to flash the radios/kernals after i flash the new gingerbread rom?
Do i just boot into my clockwork recovery (or do i need to use amron ra?) and then flash zip from sd and then flash the rooted gingerbread update like i would any other rom? Then after i flash that, just flash the radio the exact same way as i flashed the update? do i need to do a full wipe or just the delvik and regular cache? And also the kernal, do i need to flash that seperately or does that get included when i flash the .zip of the gingerbread stock rom?
I'm really confused as you can see, so if anyone could give me full step by step directions for finding, downloading and fully installing from start to finish everything that i need to download and flash and how to do it CORRECTLY i would be greatly appreciative..
Please note that i AM currently rooted and running a custom kernal, and i have previously flashed MIUI and MYN'S rom Before so i DO know how to flash things.
Thank you in advance to whoever finds the time to help me!
Basically just need pointed to all the correct Rooted downloads,
OK, the ROM, is simple. Download it, put it on your SD Card, reboot to recovery, wipe everything, and flash it, then let it reboot and you're good.
I use Amon Ra, so I'm not familiar with Clockwork, but I think the wipe process is not as complete with that recovery, so you MAY want to search for Calkukin's Wipe All.
The RADIOS, are not much different, and again I'm coming from Amon Ra, but in the Dev section, near the middle of the page ,look for the Calkukin's Thread for updated radios, wimax, PRI, etc and d/l the combo zip.
Put that on your SDCard, reboot to recovery, no need to wipe, and flash it.
I prefer to use a flashable zip file over a pc36img.zip for radios.
HERE IS THE IMPORTANT PART!!!!
When it flashes, it will ask you to reboot pretty quickly, do that, and it will go to a black screen wit ha green circle/arrow and sit there for a few minutes.
Do not touch it. Do not pull the battery, do nothing.
Then it will reboot back to recovery. When you get the menu option to reboot your phone, after it formats cache, reboot, and it will take an few extra minutes to boot up, but then you're good.
Possibly clockwork mod may be slightly different, but in a nutshell, that's it.
You didn't post any links to where i can download the new ROOTED version of the OTA gingerbread update that came out on June 4th
I need a link to the ROOTED gingerbread stock ROM
and a link to the new Kernals and Radios..
and you're saying to just flash the updated rom like any other rom? full wipe then flash... and after i flash the rom, not to reboot, but to immediately flash the kernal and then the radio also ?
and after i flash the radio last, wait for it to finish and it will take me back to recovery after a few minutes, and then to reboot?
pulazki said:
You didn't post any links to where i can download the new ROOTED version of the OTA gingerbread update that came out on June 4th
I need a link to the ROOTED gingerbread stock ROM
and a link to the new Kernals and Radios..
and you're saying to just flash the updated rom like any other rom? full wipe then flash... and after i flash the rom, not to reboot, but to immediately flash the kernal and then the radio also ?
and after i flash the radio last, wait for it to finish and it will take me back to recovery after a few minutes, and then to reboot?
Click to expand...
Click to collapse
http://www.multiupload.com/YUFZG57L0H - ROM Flash this after wiping everything in recovery, then reboot to system.
Then reboot to Recovery and flash the radios, as I described above:
http://www.mediafire.com/?s5aen3yr58trofh
what do u mean 'then reboot to system' ?
I boot into recovery, and wipe everything, then go to the 'flash zip from sd card' option, and scroll down until i find this rom's zip, then i flash it, wait a few minutes and it will take me back to recovery and leave me sittin on the option to reboot now... what do i do here? do i reboot and let the rom run ? or do i immediately go back to the flash zip from sd card and flash the radio before i reboot after flashing the rom?
and what about the kernal ? do i not need to seperately flash that also ?
pulazki said:
what do u mean 'then reboot to system' ?
I boot into recovery, and wipe everything, then go to the 'flash zip from sd card' option, and scroll down until i find this rom's zip, then i flash it, wait a few minutes and it will take me back to recovery and leave me sittin on the option to reboot now... what do i do here? do i reboot and let the rom run ? or do i immediately go back to the flash zip from sd card and flash the radio before i reboot after flashing the rom?
and what about the kernal ? do i not need to seperately flash that also ?
Click to expand...
Click to collapse
after you install the rom, select the option "reboot now." after that you will need to boot back into recovery mode and flash the kernel and reboot again. then go into hboot and flash your radios. make sure the radio zip is named PC36IMG so that your phone will auto detect the file and install it.
chunkyhao said:
after you install the rom, select the option "reboot now." after that you will need to boot back into recovery mode and flash the kernel and reboot again. then go into hboot and flash your radios. make sure the radio zip is named PC36IMG so that your phone will auto detect the file and install it.
Click to expand...
Click to collapse
1st part, right, second part wrong. I linked him to the flashable zip that you flash in recovery.
HipKat said:
1st part, right, second part wrong. I linked him to the flashable zip that you flash in recovery.
Click to expand...
Click to collapse
my bad on the assumption
pulazki said:
Okay, Please don't say, "USE THE SEARCH" because i have.. and i've read through countless and countless number's of pointless posts and i'm still really confused..
I am currently rooted and running stock rom with nerarchy's kernal
I want to update to the new gingerbread that was released, but i do not want to lose my root, i know the thread in the android development is just the regular OTA copy of the gingerbread update and that i will lose my root if i use that, but i'm sure by now someone has rooted the update, so can someone point me to the link of the new ROOTED gingerbread update?
Also i see there is a new radio and kernal .. so can someone give me complete instructions on how to fully install the new rooted update, and how to flash the radios/kernals after i flash the new gingerbread rom?
Do i just boot into my clockwork recovery (or do i need to use amron ra?) and then flash zip from sd and then flash the rooted gingerbread update like i would any other rom? Then after i flash that, just flash the radio the exact same way as i flashed the update? do i need to do a full wipe or just the delvik and regular cache? And also the kernal, do i need to flash that seperately or does that get included when i flash the .zip of the gingerbread stock rom?
I'm really confused as you can see, so if anyone could give me full step by step directions for finding, downloading and fully installing from start to finish everything that i need to download and flash and how to do it CORRECTLY i would be greatly appreciative..
Please note that i AM currently rooted and running a custom kernal, and i have previously flashed MIUI and MYN'S rom Before so i DO know how to flash things.
Thank you in advance to whoever finds the time to help me!
Basically just need pointed to all the correct Rooted downloads,
Click to expand...
Click to collapse
If you ever get stuck like this again always try and check out the stickys in the section you are in the usually have info that noobs like you can use. Also generally the
OP section usually gives great information. I know you said its u read thru pointless post but its those types of post that helped me to understand what I am doing with my phone today. So next time you reading just remember that in pointless posts could be your answer.
Good luck hope you upgraded ok
Sent from my EVO rocking Evervolv Gingerbread
Okay so i do a full wipe, then flash the rom .. once the rom finishes the flash, i reboot and let the phone fully boot up into the rom (so that the phone is on and functional) after the phone is fully booted up and running normally i turn the phone back off and reboot into recovery.. I then flash the radio and wait a few minutes for it to finish and reboot again.. correct? did i miss anything here? because i'm going to follow what i just said verbatim, so if anythere there is wrong or missing a step please let me know..
Do i need to flash a kernal at any point? or just the rom and radio?
The rom has the kernel with it after you reboot after you flashed tge rom just flash the combo and you should be good to go. If you want to flash a new kernel make sure you have a compatible gingerbread one.
Sent from my PC36100 using XDA Premium App
You are correct on everything you posted.
Just remember the radios part is crucial you do not pull the battery.
When you flash it, it will tell you to use the menu to reboot. So reboot, and it will go to a black screen wit ha green circle with an arrow in it. This will sit there for a few minutes. Don't worry about how long, because this is the critical point. Just let it sit, then it will reboot and go back to recovery.
It will say formatting cache...
When the menu pops up that you can use to reboot the phone, do that. Reboot to system and it will take a little longer than normal to boot up, because your caches were formatted.
IF something goes wrong, and it won't but just in case, don't do anything before coming here and reporting what is happening.
I'm not trying to sound overly dramatic, but this is where people make mistakes.
I've flashed radios several times no problem, as have many of us.
Remember patience is key!
that's correct. your decision on the kernel and radio.
pulazki said:
Okay so i do a full wipe, then flash the rom .. once the rom finishes the flash, i reboot and let the phone fully boot up into the rom (so that the phone is on and functional) after the phone is fully booted up and running normally i turn the phone back off and reboot into recovery.. I then flash the radio and wait a few minutes for it to finish and reboot again.. correct? did i miss anything here? because i'm going to follow what i just said verbatim, so if anythere there is wrong or missing a step please let me know..
Do i need to flash a kernal at any point? or just the rom and radio?
Click to expand...
Click to collapse
Only flash kernel if you feel like trying a different one. For now rom and radio is enough and radio is not a must
Sent from my EVO rocking Evervolv Gingerbread
bump, before i flash this can someone verify this for me?
Here is my understanding in steps
1.) Boot into recovery and do a FULL wipe
2.) Select option to flash zip from sd card
3.) flash the gingerbread-update-rom.zip
4.) After flash finishes reboot and fully run the rom
5.) reboot into recovery again
6.) select option to flash zip from sd card
7.) flash the radio.zip
8.)it takes a few minutes and takes u to a weird screen but just dont touch it and it will finish
9.) reboot
10.) Enjoy a ROOTED gingerbread stock rom ?
and I DO NOT need to flash a kernal at any point correct? it's just included in the ROM?
pulazki said:
bump, before i flash this can someone verify this for me?
Here is my understanding in steps
1.) Boot into recovery and do a FULL wipe
2.) Select option to flash zip from sd card
3.) flash the gingerbread-update-rom.zip
4.) After flash finishes reboot and fully run the rom
5.) reboot into recovery again
6.) select option to flash zip from sd card
7.) flash the radio.zip
8.)it takes a few minutes and takes u to a weird screen but just dont touch it and it will finish
9.) reboot
10.) Enjoy a ROOTED gingerbread stock rom ?
and I DO NOT need to flash a kernal at any point correct? it's just included in the ROM?
Click to expand...
Click to collapse
wow im really impressed theres no flaming here haha.. yeah that about it.. on a side note you really should make a backup before you do this....
You said "Wow i'm really suprised theres no flaming here"
Yet i dont understand why there would be flaming?
Why would someone talk **** and flame me because i'm trying to learn and be 100% completely sure of what i'm doing before i attempt to flash something to my very very expensive phone?
At least i'm taking steps to go above and beyond rather than just half-reading something and thinking i'm smarter than everyone else and bricking my phone for good.
If someone is seriously trying to learn and feel safe and secure in what they're doing why would someone flame them?
Just my opinion... The only time someone should be flamed is when they are given links to pages where they can find their answers and they just want someone to flat out walk them through it and hold their hand rather than search and find the answers themselves...
There's no flaming here because he wasn't asking the typical overly repeated questions.
And when it comes to flashing a new radio, knowing that bad things can happen, it's important that a first timer know everything involved. The steps, the issues that can occur, etc.
pulazki said:
bump, before i flash this can someone verify this for me?
Here is my understanding in steps
1.) Boot into recovery and do a FULL wipe
2.) Select option to flash zip from sd card
3.) flash the gingerbread-update-rom.zip
4.) After flash finishes reboot and fully run the rom
5.) reboot into recovery again
6.) select option to flash zip from sd card
7.) flash the radio.zip
8.)it takes a few minutes and takes u to a weird screen but just dont touch it and it will finish
9.) reboot
10.) Enjoy a ROOTED gingerbread stock rom ?
and I DO NOT need to flash a kernal at any point correct? it's just included in the ROM?
Click to expand...
Click to collapse
Are these the properly named files to use?
For gingerbread-update-rom.zip I would use: supersonic_4.22.651.2_deodexed_060511-signed-.zip
For radio.zip I would use EVO_Radio_2.15.00.05.02_WiMAX_27243_PRI_2.15_003
???
Here's the links to the files you want.
The ROM:
http://www.multiupload.com/YUFZG57L0H
The Radios, flashable version in Recovery which I like better than the PC36IMG version:
http://www.mediafire.com/?s5aen3yr58trofh
So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201
You dl'ed android sdk yet or all the fastboot files you need?
Sent from my Galaxy Nexus using xda premium
You have it correct. Use titanium backup to save all your app data. And you have to restore a nand backup if you want to undo a mod you flashed. The mod usually instructs you to backup right before flashing, so you can just revert right back if you want.
I wouldn't worry about ota anymore. Being rooted always leads to you being able to flash the latest ota quicker than if you were stock and waiting for your number to be called. Trust me after years of this that's how it always happens.
corban227 said:
So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.
efrant said:
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.
Click to expand...
Click to collapse
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus
corban227 said:
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
If you are asking that question, more reading is likely in order before you start flashing things.
But anyway: a stock ROM is the ROM Google puts out. They are found here, and instructions on how to flash are in my signature. All other ROMs are custom ROMs.
Gotcha. Ill look it up tonight
Sent from my Galaxy Nexus
I ended up reading more which lead to me unlocking and installing 4.0.4
Im happy with this now and I dont feel the need to custom mod. I need my phone to be functional all the time with out being too time consuming =D thanks for the help and leading me to my conclusion
I would seriously give aokp a try, I promise its worth it. Its the same as stock there's no extra work needed or anything to worry about or deal with. Its that good.
Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.
biffsmash said:
Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.
Click to expand...
Click to collapse
I wouldn't recommend re-locking your bootloader if you have unlocked it. Actually, I would recommend that, every time you buy a Nexus device, the first thing you should do is unlock the bootloader. Don't forget, having an unlocked bootloader does not mean you are not "stock". An unlocked bootloader doesn't affect anything (aside from what I mentioned below).
Why you ask? Good question:
Advantages of a locked bootloader
If you lose your device, no one can easily access your data, but only if, in addition to your bootloader being locked, you have the stock recovery installed AND you have USB Debugging disabled AND you have a password on your device. However, this "risk" (if you can call it that) can be mitigated by many apps that can remotely wipe your device.
Disadvantages of a locked bootloader
You cannot use fastboot commands, so you cannot flash or boot images, which can save your butt in certain occasions.
You cannot try out new radios (assuming no root).
You cannot backup your data (i.e., make an image of your device's memory (assuming no root).
You cannot root (on 4.0.4 and later).
You cannot manually update to the latest version of Android once Google starts rolling it out. You have to wait until Google decides it's your turn, which could be minutes to months after the update becomes available.
+1 to working without me thinking. I'm leaving the boot loader unlocked to install any updates Verizon doesn't push through but other than that its staying stock. Plus I really like vanilla ICS AS IT IS
Sent from my Transformer Prime TF201 using Tapatalk 2
Hi guys,
I just picked up the One X international version and am loving every moment. So far, I've unlocked the bootloader from htcdev.com, installed the Clockwork mod recovery, made a backup, and installed SuperSU (in that order).
While waiting for the next version of ARHD to be released, I've got a few questions hopefully someone can help to answer
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?
Thanks in advance for any help/suggestions Can't wait to get started with the ROMs!
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?
Yup that sounds about right to me.
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?
If coming from ARHD I think you can just flash the new ROM directly onto the phone and you wont or shouldn't loose any data.
In the 'How to Flash' section of the ARHD Thread it reads:
Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM) So basically, the Superwipe script wipes the whole phone, you do this when first flashing a ROM onto your phone, when flashing a newer version onto the phone it isn't necessary to perform a Superwipe.
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?
There are guides somewhere, I'll look for them and PM you a link if I can find it, however a lot of people sell their phones rooted and with custom roms on nowadays. Only re-locking them if they're trying to gain back some warranty.
---Edit---
This is a good thread to read through: http://forum.xda-developers.com/showthread.php?t=1799881&highlight=unrooting
A guide to unrooting: http://onexroot.com/category/one-x-unroot/
And here are the shipped RUUs for the Endeavour: http://forum.xda-developers.com/showpost.php?p=23542734&postcount=1
The-Last-Hylian said:
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?
Yup that sounds about right to me.
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?
If coming from ARHD I think you can just flash the new ROM directly onto the phone and you wont or shouldn't loose any data.
In the 'How to Flash' section of the ARHD Thread it reads:
Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM) So basically, the Superwipe script wipes the whole phone, you do this when first flashing a ROM onto your phone, when flashing a newer version onto the phone it isn't necessary to perform a Superwipe.
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?
There are guides somewhere, I'll look for them and PM you a link if I can find it, however a lot of people sell their phones rooted and with custom roms on nowadays. Only re-locking them if they're trying to gain back some warranty.
---Edit---
This is a good thread to read through: http://forum.xda-developers.com/showthread.php?t=1799881&highlight=unrooting
A guide to unrooting: http://onexroot.com/category/one-x-unroot/
And here are the shipped RUUs for the Endeavour: http://forum.xda-developers.com/showpost.php?p=23542734&postcount=1
Click to expand...
Click to collapse
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Well with venom Rom for hox u can update it is actually the only rom that has over the air updates directly by the people that made the rom also most customizable Rom too.
Sent from my HTC One X using xda app-developers app
HungryPillow said:
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Click to expand...
Click to collapse
It's safe to update any Apps and things through the Play Store yeah, On a lot of ROMs the OTA Updater is disabled, you'll have to flash the latest RUU onto the phone to get the Update.
E.G We had an ARHD ROM that was running off the 1.29.401.11 update, now we've got a version of ARHD that's running off 2.05.401.2 instead as Mike had updated the ROM to include the latest updates, so everytime there is a new update, the ROMs get updated by the Devs and we can reflash on said ROM.
HungryPillow said:
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Click to expand...
Click to collapse
You may safly update anything from Market (Play). You may backup your phonebook in Google account and through settings in phone book (Export to SD or somthing like this). SMS you may backup also to SD card or to email (there is an option in it). Or try ROMcleaner 2.1 it will backup some settings also and user apps.
And when Mike (ARHD developer) release new ROM, if it is based on NEW official update (RUU) with new sw version it is highly recomended to do a full wipe(Super Wipe script is in his thread). It will erase every app and configuration, except you SD card files.
The correct command is fastboot flash boot boot.img, not fastboot boot boot.img
Sent from my HOX running CMX by Tbalden.
I'm having issues flashing multiple roms of the 4.x.x Roms. The only rom so far I have been able to install and actually run on my phone is TweakWiz V2. I have tried many other roms and they just stay in a boot loop screen. Examples are with the Avatar rom it just stays on the mask an keeps going and going. I have tried CyanogenMod/Cyan Kang an it just stays on the Circle with the bar going around on the inside.
I am running the TWRP Touch Recovery. I also have the latest Radio update and everything else is updated on my phone.
I also let the install itself run for 10+ minutes everytime. But all the roms I try they keep doing the exact same thing and staying in a boot loop.
Can anyone give me any tips or suggestions to maybe something I could do to use another rom or maybe even a suggestion to something I may have overlooked.. Any help is appreciated. Thank you.
An if you need me to give any other information let me know an I will provide.
1. what recovery version not just the name ?? 2.steps you are doing to flash 3. steps you are doing after you flash
krazierokz said:
1. what recovery version not just the name ?? 2.steps you are doing to flash 3. steps you are doing after you flash
Click to expand...
Click to collapse
1.Im using the latest TWRP.
2. Wiping System, Cache, Dvalik or whatever. I wipe everything in the usual instructions. And I make a backup of previous ROM. Flash the ROM then the G-Apps.
3. After I flash I let the ROM run its course an I wait from 15-45 mins for the ROM to load if it doesnt I switch back to TweakWiz or try another.
Sent from my SAMSUNG-SGH-T989 using XDA Premium HD app
try using this recovery since the recovery you are using is the latest one and technically for 4.3 ROMs, give this a shot http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.5.0.0-hercules.tar its the same recovery but lower . the steps you clarified seem very proper but your recovery may be at fault crossing fingers try flashing that recovery through odin or download the zip from the same website and report back after trying to flash again
Are you sure you are wiping DATA also?
You will need to do this, if you are flashing a 4.2 or 4.3 ROM, then you will also want to wipe the pre-load. Then flash the rom, and gapps.
Use the newest TWRP 2.6.1.0 to flash anything, don't need an older recovery to flash older ROM's.
idtheftvictim said:
Are you sure you are wiping DATA also?
You will need to do this, if you are flashing a 4.2 or 4.3 ROM, then you will also want to wipe the pre-load. Then flash the rom, and gapps.
Use the newest TWRP 2.6.1.0 to flash anything, don't need an older recovery to flash older ROM's.
Click to expand...
Click to collapse
Is there a option I'm not deleting ?
Because I've been flashing ROMS on different phones an I have never had any issues before. I was using ICS an GB etc before an just recently decided to upgrade an use the JB (I think that's the name.) on my phone.
I am wondering what's next after S Off to install Custom Roms, How do I go about doing that?
I am rooted with beaups s-off method.
thank you
JonrossMaddox said:
I am wondering what's next after S Off to install Custom Roms, How do I go about doing that?
I am rooted with beaups s-off method.
thank you
Click to expand...
Click to collapse
Flash a custom recovery,and then flash the ROM
Sent from my unknown using Tapatalk 4
nexusisneecesary said:
Flash a custom recovery,and then flash the ROM
Sent from my unknown using Tapatalk 4
Click to expand...
Click to collapse
How do I go about flashing a custom recovery?
JonrossMaddox said:
How do I go about flashing a custom recovery?
Click to expand...
Click to collapse
Go into the original android development section find twrp touch recovery and follow those instructions there.
Sent from my unknown using Tapatalk 4
Since you are a new user I will help you with a little more depth, I hate seeing new users mess up their device. Give me a second to get it together and I will edit this post with some helpful info.
(EDIT)
OK so Follow the instructions on this page ( http://forum.xda-developers.com/showthread.php?t=2416431 ) to get a custom recovery. It's TWRP, and I like it a lot. I love that it's touch, because I remember using amon ra on the HTC Evo and you had to use the volume up & down + power button to navigate the menus and it was sometimes very easy to make a mistake. This touch recovery eliminates that.
Next, go to either the original android development OR the android development section of the Verizon HTC One and choose either an AOSP rom or sense based rom. So far I've used the Google Play Edition rom and now I'm on andy's bonestock and have really liked them both. Make sure any rom you ever flash is compatible with your phone, very, very important. if you don't know, just ask. MOST users on here are friendly and will say yes or no and not give you a hard time.
Roms are very easy to install. Just download the .zip, I download it straight from my phone, but you can also download on your computer and then transfer it to your phones storage. (thanks to andybones advice, I have started checking the MD5 of the rom. Devs include it in thread of the info of the rom here on xda, and once you have the .zip on your phone, use a file manager to view the MD5 and compare it to what the dev has put in their thread. If it matches, you're good. Then boot into recovery and DO A BACKUP OF YOUR STOCK AND KEEP IT!! Everything you need to backup is already checked with TWRP so that's helpful. Once you're done with the backup, then do a wipe. I wipe SYSTEM, DATA, CACHE, & DALVIK CACHE. Then, go back to the TWRP main screen and select install. Find the .zip you want to install and flash it. Some roms have aroma installer so it will bring you to a special screen that allows you to select options you want to have in the rom. check the boxes of the apps/options you want in the rom and follow the 'next' prompts until the rom installs. After you're done, reboot, set up your new rom and enjoy it!
If anyone more experienced than me has any info to add to this, feel free.
Okay so I am kind of stuck, I have tried on Ubuntu, Windows, and Mac, but I cannot get my device to show up under fastboot command. Why wont it? I rebooted into fastboot from the bootloader.
EDIT: Nevermind fixed, I didn't realize it couldn't be booted into the OS.
josh995 said:
Since you are a new user I will help you with a little more depth, I hate seeing new users mess up their device. Give me a second to get it together and I will edit this post with some helpful info.
(EDIT)
OK so Follow the instructions on this page ( http://forum.xda-developers.com/showthread.php?t=2416431 ) to get a custom recovery. It's TWRP, and I like it a lot. I love that it's touch, because I remember using amon ra on the HTC Evo and you had to use the volume up & down + power button to navigate the menus and it was sometimes very easy to make a mistake. This touch recovery eliminates that.
Next, go to either the original android development OR the android development section of the Verizon HTC One and choose either an AOSP rom or sense based rom. So far I've used the Google Play Edition rom and now I'm on andy's bonestock and have really liked them both. Make sure any rom you ever flash is compatible with your phone, very, very important. if you don't know, just ask. MOST users on here are friendly and will say yes or no and not give you a hard time.
Roms are very easy to install. Just download the .zip, I download it straight from my phone, but you can also download on your computer and then transfer it to your phones storage. (thanks to andybones advice, I have started checking the MD5 of the rom. Devs include it in thread of the info of the rom here on xda, and once you have the .zip on your phone, use a file manager to view the MD5 and compare it to what the dev has put in their thread. If it matches, you're good. Then boot into recovery and DO A BACKUP OF YOUR STOCK AND KEEP IT!! Everything you need to backup is already checked with TWRP so that's helpful. Once you're done with the backup, then do a wipe. I wipe SYSTEM, DATA, CACHE, & DALVIK CACHE. Then, go back to the TWRP main screen and select install. Find the .zip you want to install and flash it. Some roms have aroma installer so it will bring you to a special screen that allows you to select options you want to have in the rom. check the boxes of the apps/options you want in the rom and follow the 'next' prompts until the rom installs. After you're done, reboot, set up your new rom and enjoy it!
If anyone more experienced than me has any info to add to this, feel free.
Click to expand...
Click to collapse
Just to make sure I have the steps correct:
1) S-Off the phone
2) Unlock bootloader via htcdev or other methods posted on this forum
3) ???
4) Flash a recovery
5) Flash a rom
Are we supposed to do anything between unlocking and flashing a recovery?
WhiteAsIce said:
Just to make sure I have the steps correct:
1) S-Off the phone
2) Unlock bootloader via htcdev or other methods posted on this forum
3) ???
4) Flash a recovery
5) Flash a rom
Are we supposed to do anything between unlocking and flashing a recovery?
Click to expand...
Click to collapse
Before flashing any rom, you should make a backup, so that you can revert to a prior iworking state, in case the rom doesn't run or doesn't please you.
Can Someone Sticky This, or Create a Thread to Stick This? Then people can be pointed to it.
jpradley said:
Before flashing any rom, you should make a backup, so that you can revert to a prior iworking state, in case the rom doesn't run or doesn't please you.
Click to expand...
Click to collapse
just went s-off
I just successfully ran Rumrunner on my HTC One GSM and now I am leery about flashing Roms on my device. I'm currently using Twrp 2.6.3.3, and is wiping SYSTEM, DATA, CACHE, & DALVIK CACHE really safe? Cause before I would do a advance wipe for every new install..
And, is there a way to revert back S-on without locking bootloader? Cause every method I've looked up restores to stock..
Thanks in advance!