Related
Hi guys, I've opened this thread so we can talk about the camera developement for CM9.
Here is the link including files and a how-to.
Here is the second link if you want even clearler instructions (Thanks to texten)
andy did u try it?( camera work)
Sent from my GT-I8150 using xda premium
Nothing, isn't working for me...
EDIT: I've an alpha 3, flashed the zip, and checked the permissions... Waiting for Arco...
I think we are missing with something..hopefully our Mentor. arco68 have the time to pass thru ere..
Can somebody poke alisd too...NVM I think I just did
http://forum.xda-developers.com/showthread.php?p=26384027
Sent from my GT-I8150 using Tapatalk 2
We can wait xD
iSadic said:
Nothing, isn't working for me...
Click to expand...
Click to collapse
+1
I tried very quickly 'cuz I don't have much time, but oisis' update zip+alpha2 didn't work.
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
tried the instructions, but not working...
mike_kenji said:
tried the instructions, but not working...
Click to expand...
Click to collapse
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
also the same procedure for the "media_profile.xml" in etc...
this could work:
just take that zip in my post, replace firmware folder and the media_profile.xml with the ones of your latest gingerbread...
and follow the installation instructions in my post
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
texten said:
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
Click to expand...
Click to collapse
where can i find those files? is the camera working for you?
mike_kenji said:
where can i find those files? is the camera working for you?
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
and do not forget to follow the installation instructions
for your further development on camera, you can also use these "instructions for camera testers"
(maybe you will add these to post#1 of this topic here)
--------------------------
here are instructions for camera testers:
Few important things:
1. make notes, because we will need it to restore steps.
2. make a logcat:
Code:
adb logcat -d > logcat.txt
if you want, edit logs like that (less logs - easier to read, logs only related with camera):
Linux shell:
Code:
cat ./logcat.txt | grep camera > logcat.new.txt
Windows cmd:
Code:
type logcat.txt | findstr camera > nwelogcat.txt
3. If you will find in log that HAL cannot connect with camera do not post logs, because they are useless
4. Do not zip or rar logs = easier to read on phone
----------------------------------
Additional Links:
You can try files from these phones.
Phones with MSM8255:
- CDMA XPeria Play
- LG Revolution
- HTC Desire S
- Sony xperia mini,mini pro, neo etc - camera works
- My touch 4g - camera works
- Xperia play - camera works
- Htc desire s - camera works
- Huawei honor - official ICS
- Htc one V - no front camera but official ICS
- http://forum.xda-developers.com/showthread.php?t=1639634
Thanks to: Spider550 for links, he cannot post here yet.
----------------------------------------------------------------------
if you make a logcat, do not forget to post which files you used.
folders for all files:
do not forget to set permissions for changed files/folders like all other files/folders there... and reboot after all changes you made!
*.so files to /system/lib
media_profile.xml to /system/etc
camera.apk to /system/app
firmware files to /system/firmware (maybe you have to create a folder)
---------
now you can start with testing.
for logcat = shutdown device - boot - start camtests - after that make a logcat directly.
texten said:
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
Click to expand...
Click to collapse
i'll try this in a while... thanks a lot... sorry for being a noob...
mike_kenji said:
i'll try this in a while... thanks a lot... sorry for being a noob...
Click to expand...
Click to collapse
no problem, maybe one other user of your device will give it a try
texten said:
no problem, maybe one other user of your device will give it a try
Click to expand...
Click to collapse
uhm... one last question, where do i put the firmware files? hehehe
*EDIT
nevermind, found it... thanks again!
mike_kenji said:
uhm... one last question, where do i put the firmware files? hehehe
Click to expand...
Click to collapse
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
texten said:
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
Click to expand...
Click to collapse
thanks.... wish me luck
mike_kenji said:
thanks.... wish me luck
Click to expand...
Click to collapse
good luck.
hahaha, i'm stuck on a bootloop.... try again...
So, some days back I was on Intial Rom on my X.But due to the hotspot not working I looked for solutions.I found this post by @mrsunny7 .Tried his zip file but it did not work. So I searched through his thread and I found this post.I just flashed the patch 3(idk why) on the original Intial Rom(not from the post mentioned above) and alas!the hotspot doesn't work anymore. Shifted to Lewa, Minirom S5 and currently Carbon KK(v1.7) but it doesn't seem to work on any of these.Can somebody help?
rajat13 said:
So, some days back I was on Intial Rom on my X.But due to the hotspot not working I looked for solutions.I found this post by @mrsunny7 .Tried his zip file but it did not work. So I searched through his thread and I found this post.I just flashed the patch 3(idk why) on the original Intial Rom(not from the post mentioned above) and alas!the hotspot doesn't work anymore. Shifted to Lewa, Minirom S5 and currently Carbon KK(v1.7) but it doesn't seem to work on any of these.Can somebody help?
Click to expand...
Click to collapse
Fix HERE
YSH ALSAGER said:
Fix HERE
Click to expand...
Click to collapse
As I dont have a PC for now , I tried moving that bdata.bin file to persist folder.But that doesnt work Isnt there a flashable zip or anything else?
Flashable ZIP
rajat13 said:
As I dont have a PC for now , I tried moving that bdata.bin file to persist folder.But that doesnt work Isnt there a flashable zip or anything else?
Click to expand...
Click to collapse
Try to Flash Zip in attachments, Tell me What happend
YSH ALSAGER said:
Try to Flash Zip in attachments, Tell me What happend
Click to expand...
Click to collapse
No bro, this didn't work. :/
onda v820w ch tablet has two version
V1 and V3V5
my tablet is V1 , after use official v820wch rom , no wifi& BT
wifi device is RTL8723BS ....
I see 8723bs.ko in system/lib/modules , but I can't find modprobe command to load this driver
please help ....
wgarnett said:
onda v820w ch tablet has two version
V1 and V3V5
my tablet is V1 , after use official v820wch rom , no wifi& BT
wifi device is RTL8723BS ....
I see 8723bs.ko in system/lib/modules , but I can't find modprobe command to load this driver
please help ....
Click to expand...
Click to collapse
What happens when you do insmod /system/lib/modules/8723bs.ko? I've got the ROM for V820W CH working on similar device (Cube iWork8 Ultimate) which also uses rtl8723bs.
You will also need to copy /system/vendor/lib/libbt-vendor.so, /system/etc/bluetooth and /system/etc/firmware/bt from your stock ROM.
copy and then ??????
re
Did you solve it? I have same problem no wifi :/
Raiper34 said:
Did you solve it? I have same problem no wifi :/
Click to expand...
Click to collapse
no modprobe command to load 8723bs.ko
it need linux to extract image
it need modify *init*.sh to load 8723bs.ko
and repack image
wgarnett said:
no modprobe command to load 8723bs.ko
it need linux to extract image
it need modify *init*.sh to load 8723bs.ko
and repack image
Click to expand...
Click to collapse
Can you copy paste, *init*.sh file or upload it here? I newer work with android roms...
Anyone tried this ROM with V3 version?
Raiper34 said:
Can you copy paste, *init*.sh file or upload it here? I newer work with android roms...
Click to expand...
Click to collapse
/etc/init.atomisp.sh
I think need to edit this .sh and add 8723bs.ko , path is lib\modules
NeKit1000 said:
What happens when you do insmod /system/lib/modules/8723bs.ko? I've got the ROM for V820W CH working on similar device (Cube iWork8 Ultimate) which also uses rtl8723bs.
You will also need to copy /system/vendor/lib/libbt-vendor.so, /system/etc/bluetooth and /system/etc/firmware/bt from your stock ROM.
Click to expand...
Click to collapse
Are you saying you have a Remix ROM for the Cube iWork8 Ultimate?
That's what I'm looking for all over the place!
I have a Cube i6 with Remix that is great, but got the Cube iWork8 Ultimate with Windows 10 that I hate hate hate. I don't know how people can function on that since the Windows buttons are so tiny and lots of screens wont resize. Even after using the Intel graphics manager to lower resolution to get bigger buttons it still sucks. And there is no decent Start menu, all them stupid tiles that I can't figure how to get rid of, can't find Control Panel without going to Settings and searching for it...yada yada. Did I mention I hate it?
So if you have Remix working on Cube iWork8 Ultimate, give it here boyo! I will write a haiku or put a picture of you as my background, whatever you want.
Hebekiah said:
Are you saying you have a Remix ROM for the Cube iWork8 Ultimate?
That's what I'm looking for all over the place!
Click to expand...
Click to collapse
Do you have Windows/Android dualboot installed on it? Contact me in PM, since that's probably for another topic.
wgarnett said:
/etc/init.atomisp.sh
I think need to edit this .sh and add 8723bs.ko , path is lib\modules
Click to expand...
Click to collapse
Do no have your system.img? Because my modification did not help me, bootloop, I only add module to init file...
Raiper34 said:
Do no have your system.img? Because my modification did not help me, bootloop, I only add module to init file...
Click to expand...
Click to collapse
I only has windows environment , it unpack/repack will damage system.img inside files permmision ....
so I don't have any modified version img files
I think this work need linux environment to repack
wgarnett said:
I only has windows environment , it unpack/repack will damage system.img inside files permmision ....
so I don't have any modified version img files
I think this work need linux environment to repack
Click to expand...
Click to collapse
I followed this tutorial to unpack it, add line inside init script and then again pack into img file. http://forum.xda-developers.com/showthread.php?t=1588461
Raiper34 said:
I followed this tutorial to unpack it, add line inside init script and then again pack into img file. http://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
so , do you success to flash this modified firmware and make wifi work ????
if it work , plz share to public
wgarnett said:
so , do you success to flash this modified firmware and make wifi work ????
if it work , plz share to public
Click to expand...
Click to collapse
Sadly no, bootloop :/
Raiper34 said:
Sadly no, bootloop :/
Click to expand...
Click to collapse
do you get android firmware with gapps included ?
wgarnett said:
do you get android firmware with gapps included ?
Click to expand...
Click to collapse
I modified original Remix rom.
Raiper34 said:
I modified original Remix rom.
Click to expand...
Click to collapse
do you success to make v820w ch v1 wifi working now ?
Raiper34 said:
Sadly no, bootloop :/
Click to expand...
Click to collapse
do you try to use RMXtools v1.7 Fix to unpack and repack ?
wgarnett said:
do you try to use RMXtools v1.7 Fix to unpack and repack ?
Click to expand...
Click to collapse
I will try it thanks, did you really have wifi now?
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Using atmos sound system and is ok
Have you tried out their own internal audio control program
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738
Eagle-no1 said:
Have you tried out their own internal audio control program
Click to expand...
Click to collapse
Yes, but im not satisfied with the result, The range of bands is very small
shafi31 said:
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738
Click to expand...
Click to collapse
working great! :highfive:
Thks!! :victory:
fantamadnesss said:
Using atmos sound system and is ok
Click to expand...
Click to collapse
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?
quaresma158 said:
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24651442761498767
Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that
frickinjerms said:
Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that
Click to expand...
Click to collapse
Do you have a link fot his file? Can't seem to find it
jay_snake said:
Do you have a link fot his file? Can't seem to find it
Click to expand...
Click to collapse
Oops it was in the Dolby Atmos thread by westenbrood. My brain is derpy sometimes
HERE YA GO!
It's right there past the 6.5 download link, can't miss it. I don't know for certain if this is the magic answer for nougat, but if viper is showing all is well other than the driver status being abnormal (which was the problem with MM) then you should be good to go after flashing it. As always YMMV. Make a backup just in case.
Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone
dindoliya said:
Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone
Click to expand...
Click to collapse
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files
A.R.I.S.E. Leviticus 1.3 working just fine
razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Sent from my Pixel XL using XDA-Developers mobile app
oriveradel said:
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Click to expand...
Click to collapse
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since
gmlogan said:
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since
Click to expand...
Click to collapse
I've tried everything to get viper to work, I don't understand - previously all I've had to do is install the apk, install drivers - reboot & jobs done!
Now it's like you need a masters degree.
I've followed so many guides, viper apk is installed, rooted, busybox & I've renamed the file in system / etc - but upon opening viper & attempting 2 install drivers, I'm told installation has failed.. something something busybox, something something check if rooted :what::banghead:
My hope now is a Dev will build a beta 9 build & incorporate viper
dindoliya said:
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files
Click to expand...
Click to collapse
Sorry to hear that, remove it, reboot and flash zip again
Check SuperSu if still there delete it
rename file
SplashInjectorsplash injector is a tool created by me based on the work done by @makers_mark . it is a basic command line interface but it gets the job done. it supports all oneplus devices so far except the oneplus x :crying: i can add support once someone gets me the logo.bin file from that device. The tool is pretty simple its based on the work here https://forum.xda-developers.com/oneplus-3/themes/mod-splash-screen-image-injector-t3441999 this is where i got this all from. i know it can be kinda hacky and only supports unix systems i think you can get it working by using git bash on windows. In its current state it can decode and encode all oneplus logo.bins (Including the OnePlus 5!) it can also pack flashable zips for you automatically. all you need to do is run the decode option edit the file you want in the output folder. Then you can run the encode command and it will pack it all back up. Then package it with the package command. Once again major credit to @makers_mark he did all the leg work. i just made it a little more friendly. lmk if there is any issues you find
Telegram: @ethanbanker if you need anything contact me here.
Now lets get to it
follow the instructions here located here
https://github.com/ethanbanker2428/SplashInjector
Updates:
1.52: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
WARNING I AM NOT RESPONSIBLE FOR ANYTHING YOU DO. DO THIS AT YOUR OWN RISK
Excellent...... working great for OP5
Thanks
biohaz55 said:
Excellent...... working great for OP5
Thanks
Click to expand...
Click to collapse
Hi, I can't get it working on Windows. If I send you a PNG will you make me a zip?
Thanks! Here is the Windows binary and src for logoinjectorv1.52.
makers_mark said:
Thanks! Here is the Windows binary and src for logoinjectorv1.52.
Click to expand...
Click to collapse
thanks im gonna rebuild with the newest version and probably work on a windows version tonight :good:
Can you make a captain America one?
can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus
freakzapster said:
can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus
Click to expand...
Click to collapse
did u use option 3? package? that should make one after you edit the files
bobglaus said:
did u use option 3? package? that should make one after you edit the files
Click to expand...
Click to collapse
actually i dont know to edit files i am new to this thats why i am not understanding
freakzapster said:
actually i dont know to edit files i am new to this thats why i am not understanding
Click to expand...
Click to collapse
click the help option. i feel it explains it pretty well. to edit the png in the output folder use gimp or photoshop
Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push
bobglaus said:
Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push
Click to expand...
Click to collapse
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.
badtzo said:
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.
Click to expand...
Click to collapse
bgr does **** up the colors a bit or fixes it. its one of those things where you use it if you need it and you will know if you need it.
also update to anyone else that update will have to wait. im a perfectionist and im revamping the whole thing to alot cleaner code. windows should work tho and the oneplus x will be supported hopefully too
Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
bobglaus said:
Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
Click to expand...
Click to collapse
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.
Bigs1985 said:
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.
Click to expand...
Click to collapse
use the tool i linked in the post you qouted
bobglaus said:
use the tool i linked in the post you qouted
Click to expand...
Click to collapse
I thought it didn't package the zips correctly? Is that fixed?
Bigs1985 said:
I thought it didn't package the zips correctly? Is that fixed?
Click to expand...
Click to collapse
No this one https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772
how can i pull LOGO.bin from my oneplus 5?
when i run:
adb shell dd if=/dev/block/sde17 of=/sdcard/partition/LOGO.bin
Click to expand...
Click to collapse
i get this error message:
dd: /dev/block/sde17: Permission denied
Click to expand...
Click to collapse
Please help
Thanks
spicemaster said:
how can i pull LOGO.bin from my oneplus 5?
when i run:
i get this error message:
Please help
Thanks
Click to expand...
Click to collapse
Of course you need root，The right command is
adb shell su -c dd if xxxx