Samsung tab 3.7 SM-T210 ROMs? - Paranoid Android Q&A

Any stable ROMs? After flashing unofficial cm11 it was too buggy for me. Tried to reflash seal v4. With blackhawk kernel but I now have no home page as setup wizard failed. Any suggestions
Sent from my GT-I9100 using XDA Free mobile app

What does this have to do with paranoid android?
#stayparanoid

I was hoping there was a pa ROM for t210

jimbomodder said:
I was hoping there was a pa ROM for t210
Click to expand...
Click to collapse
If you don't see it in the legacy section of the download site for paranoid android, then we don't have it. If there is a section of these forums dedicated to your device, you should check there.
#stayparanoid

I have found some. I do apologise

Related

[Q] OverClock

I am running jellybam 7.5.0, an aosp 4.2.2 rom and i want to overclock my s3 but whenever i go to peformence control it only lets me go to 1512MHz. Can someone find me a kernel that works with this rom cuz i really like the rom and want to keep it and i also really want to overclock. PLZ help me!!!!
Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.
xBeerdroiDx said:
Kernels that support overclocking on aosp 4.2.2 roms can be found in the Original Android Development section. You probably won't find much help on xda with jellybam.
Click to expand...
Click to collapse
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.
tylerray0040 said:
Can you see if you can find one. Ive looked just cant. on jellybams website they said any aosp compatible will do.
Click to expand...
Click to collapse
You will need one of these two. Depending. In their change log it is not clear if the ROM is based on Linux 3.0 or Linux 3.4 kernel.
KT747:
Aosp 4.2.2 Linux 3.0:
http://www.mediafire.com/?tsoe7rxqhlabpcd
Aosp 4.2.2 Linux 3.4:
http://www.mediafire.com/?851bd2h5r571xi3
Try the 3.4 first if it doesn't boot, reboot in recovery and flash the 3.0.
OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
OK so i downloaded it went into recovery flashed 1 then cleared chache then dalvik then i fixed permissions then when i rebooted it just went to a blank screen. it did this for both kernels l. plz tell me what I'm doing wrong.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
is jellybam a 3.0 kernel based rom or 3.4?
for 3.4, try flashing the 4/11 release
Whats the 4/11 release
Sent from my SAMSUNG-SGH-I747 using xda premium
tylerray0040 said:
Whats the 4/11 release
nt. nt from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
You really need to find out what kernel this rom supports.
You could also flash the rom again and wipe bothe caches
If I were you I would switch to root box because jellybam is dead now. Try to find the root box nightly in the original development forum. Find the date 4/5 meaning 5th of april . with that I would flash the KT kernel with is also found in original development but download the Linux 3.4 version and flash that with the 4/05 nightly
jellybam is not supported in XDA, nor are duplicate postings of the same issues amongst multiple threads.
This thread is now closed.

Will Team-Cajanica make the new CM ROM based on 4.4 KitKat on the i1860

Will there be a new CM rom based on 4.4 KitKat for the Samsung Galaxy Ace 2 by either dh.harald or team cajanica?
First it's Gt-I8160 and not i1860
Second this is the wrong section for questions. The next time Ehen you ask sth go to question section from ace II
Third yes I thing that there will be a cm based 4.4 custom Rom but it will take time because wie first need to wait until the cyanogenmod Team made cm 10.3 or cm 11. And when that is finished maybe Team Cajanica will also make cm 10.3 or cm11 for us.
Probably yes but cm not aosp.
Since 4.4 probably will be optimized for "low" devices.
Do we really need separate thread for this question?
WHY ... WHY people do not use "Q&A Thread" !
If it'll be optomised for low devices, with KitKat we will be have rocket
Sent from my GT-I8160 using XDA Premium 4 mobile app
Thanks for the reply and sorry for posting in the wrong section.
Shadowcareful said:
First it's Gt-I8160 and not i1860
Second this is the wrong section for questions. The next time Ehen you ask sth go to question section from ace II
Third yes I thing that there will be a cm based 4.4 custom Rom but it will take time because wie first need to wait until the cyanogenmod Team made cm 10.3 or cm 11. And when that is finished maybe Team Cajanica will also make cm 10.3 or cm11 for us.
Click to expand...
Click to collapse
Thank you for replying and I hope they do make a CM ROM for the GT-I8160 because I've got 10.1 and it works really work.
Also sorry for not posting in the correct section. I just forgot to click the 'Yes, this is a question button'.
Thumb up
Sent from my GT-I8160 using XDA Premium 4 mobile app
There is some activity in their github regarding CM 11 (kitkat).
Sent from my GT-I8160 using Tapatalk
Nice, that sounds really hopeful
Sent from my GT-I8160 using XDA Premium 4 mobile app

[Q] Tab pro 10.1 rom development

Any development for this device. Can't find a custom recovery or any roms. If someone could point me in the right direction. I'd appreciate it.
AndroidSupplier said:
Any development for this device. Can't find a custom recovery or any roms. If someone could point me in the right direction. I'd appreciate it.
Click to expand...
Click to collapse
What I would like to see is a pure stock 4.4.2 flashable ROM. Then I could install the Xposed framework and modules such as Gravity Box. The modules provide the sweetest of the custom ROM features while keeping stock's stability. Right now that is what I run on both my N5&10. I also use the Franco kernel on both but that is specifically for extended battery life. The kernel is nice but I could live with out it.
Sent from my Nexus 10 using XDA Premium HD app
3DSammy said:
What I would like to see is a pure stock 4.4.2 flashable ROM. Then I could install the Xposed framework and modules such as Gravity Box. The modules provide the sweetest of the custom ROM features while keeping stock's stability. Right now that is what I run on both my N5&10. I also use the Franco kernel on both but that is specifically for extended battery life. The kernel is nice but I could live with out it.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
I completely agree. I got my tab pro 10.1 yesterday. Rooted it of course and was disappointed there literally is no rom development. I saw that there is cm11 on the 8.4 version and twrp. That would be awesome. Any developers out there that want to give this a shot. That would be awesome.
We have cm11 and both recoveries but the Rom is still in testing stages. I read somewhere that Samsung hasn't released the kernel and something with the KK rom. Maybe then they could port it to your 10. I agree that there isn't much developing going on for our tab pro. The guy doing the cm11 is trying to make it an official cm device. Maybe the 10 &12 will follow.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

[Q] What is the most stable rom for kindle fire hd 7?

Hi! I am trying to find out if anybody knows which cm version is the most stable.
cm11 gave me ghost touches and the screen went all weird. Is cm10.1 or cm10.2 any good. Please relpy
Bao289 said:
Hi! I am trying to find out if anybody knows which cm version is the most stable.
cm11 gave me ghost touches and the screen went all weird. Is cm10.1 or cm10.2 any good. Please relpy
Click to expand...
Click to collapse
CM11 had some updates that has seemed to get rid of the ghost touches. Which ever ROM you choose, choose a KitKat. You have to choose your own ROM, not really allowed to "recommend" a ROM on here.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Thanks
LinearEquation said:
CM11 had some updates that has seemed to get rid of the ghost touches. Which ever ROM you choose, choose a KitKat. You have to choose your own ROM, not really allowed to "recommend" a ROM on here.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, i tried cm10.2 but it was too slow, then i tried cm11 which was a lot better. There were a few bugs that i managed to fix but overall it was a good rom. :victory:
Bao289 said:
Thanks, i tried cm10.2 but it was too slow, then i tried cm11 which was a lot better. There were a few bugs that i managed to fix but overall it was a good rom. :victory:
Click to expand...
Click to collapse
And before this thread becomes a best rom thread and since you got your answer,thread is closed.
Thank you

[Q] Which Rom for my S3?

Hi!
It's the first time I try to flash a ROM on my Galaxy S3 and I don't wanna do anything that would brick my phone,so that's why I'm asking here for your help.
So, I'm looking for a ROM that looks like KitKat 4.4. I searched a bit and I've found a great ROM, Resurection Remix but I don't see it avaible for my phone ( SGH-I747M Koodo). Is it avaible for my phone? where can I download it?
If not, which ROM would work with my phone? My firend told to not use CM 11.
thanks!
pro3000 said:
Hi!
It's the first time I try to flash a ROM on my Galaxy S3 and I don't wanna do anything that would brick my phone,so that's why I'm asking here for your help.
So, I'm looking for a ROM that looks like KitKat 4.4. I searched a bit and I've found a great ROM, Resurection Remix but I don't see it avaible for my phone ( SGH-I747M Koodo). Is it avaible for my phone? where can I download it?
If not, which ROM would work with my phone? My firend told to not use CM 11.
thanks!
Click to expand...
Click to collapse
since your phone is i747M, any rom you found in this forum, http://forum.xda-developers.com/galaxy-s3-att, will work
I personally like carbon kk the best a google search would get you it
Sent from my SAMSUNG-SGH-I747 using Tapatalk
rkant18 said:
I personally like carbon kk the best a google search would get you it
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Are you having any issues with this ROM at all?
I don't find a carbon download link for my phone (SGH-I747M)
pro3000 said:
I don't find a carbon download link for my phone (SGH-I747M)
Click to expand...
Click to collapse
it's now unified, before it was unified, it was d2att
so look for D2LTE instead
Try to find slimroms or beanstalk.Carbon is OK but overall CyanogenMod is the best choice.
Sent from my SAMSUNG-SGH-I747M using XDA Free mobile app

Categories

Resources