Related
EDIT - No sollution found!!
Please examine this thread if you have similar problems, but please don't ask how we got it fixed. The phone was just done for, dead, bricked, whatever you want to call it.
Good luck with yours!
Trying to ad a horizontal rule, but this'll do.
Click to expand...
Click to collapse
Orriginal post below.
Hey people,
A friend of mine is getting a white screen on his Galaxy Y, can't do anything with it. Even a hard reset (as found on the internet) doesn't work. (Hard reset being holding volume up, center button and power button).
Does anyone have experience with this problem?
Tim
Click to expand...
Click to collapse
First state what happen?
Try remove battery and power on again. If its not work try volume down home button then power button. If the download mode appears flash stock rom again using odin..
Sent from my GT-S5360 using xda premium
timmiej93 said:
Hey people,
A friend of mine is getting a white screen on his Galaxy Y, can't do anything with it. Even a hard reset (as found on the internet) doesn't work. (Hard reset being holding volume up, center button and power button).
Does anyone have experience with this problem?
Tim
Click to expand...
Click to collapse
Thats NOT a hard reset! Pull the battery, and insert it again. Now do your "hard reset". As in, holding volume up+home+power key together until you see the Samsung logo. Do a data wipe and restart. If that doesnt work, search for flashable firmware packages in the Development section. If that doesn't work either, replace your phone.
Hey guys,
Thank you both for your replies.
rockerblood said:
First state what happen?
Try remove battery and power on again. If its not work try volume down home button then power button. If the download mode appears flash stock rom again using odin..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Stating what happened: He just suddenly had a white screen, unable to do anything with the phone. Rebooting, pulling the battery etc. didn't do anything.
Your second option didn't work either unfortunatly.
Raol Emostar said:
Thats NOT a hard reset! Pull the battery, and insert it again. Now do your "hard reset". As in, holding volume up+home+power key together until you see the Samsung logo. Do a data wipe and restart. If that doesnt work, search for flashable firmware packages in the Development section. If that doesn't work either, replace your phone.
Click to expand...
Click to collapse
Sorry about that, I just read in about this phone, since it's not mine, and I already forgot about the second part.
Unfortunately, neither of this works. Every boot method gets him a white screen. Since he rooted his phone about a week ago, looks like he's going to need a new one.
timmiej93 said:
Hey guys,
Thank you both for your replies.
Stating what happened: He just suddenly had a white screen, unable to do anything with the phone. Rebooting, pulling the battery etc. didn't do anything.
Your second option didn't work either unfortunatly.
Sorry about that, I just read in about this phone, since it's not mine, and I already forgot about the second part.
Unfortunately, neither of this works. Every boot method gets him a white screen. Since he rooted his phone about a week ago, looks like he's going to need a new one.
Click to expand...
Click to collapse
try flashing the ROM using Odin from the PC
Might Odin be the same as Samsung Kies in dutch? Or is this an external program?
Assuming it's this program: http://odin-win.sourceforge.net/
Now how does this work? I've been flashing my phone for quite a while now, but I'm not familiar with this program. Can I just download a ROM (stock) from the developers part here?
timmiej93 said:
Might Odin be the same as Samsung Kies in dutch? Or is this an external program?
Assuming it's this program: http://odin-win.sourceforge.net/
Now how does this work? I've been flashing my phone for quite a while now, but I'm not familiar with this program. Can I just download a ROM (stock) from the developers part here?
Click to expand...
Click to collapse
its a tool for windows which lets you flash firmwares. You need to connect your phone to your pc is download mode.
Search Google and you will get lots of tutorials explaining the process.
Sent from my SK17i using xda app-developers app
Okay thanks for all your help guys.
My friend tried everything you people suggested, but nothing worked. He just had an expert look at it and it's just totally bricked. Gotta buy a new one. Thanks for trying anyway!
Sorry for bringing this up again, but I kinda feel sorry when people brick their devices. Yours doesnt have to be a brick. Read this. The instructions are on the first page. There's a link to Odin too. Hope for the best!
Raol Emostar said:
Sorry for bringing this up again, but I kinda feel sorry when people brick their devices. Yours doesnt have to be a brick. Read this. The instructions are on the first page. There's a link to Odin too. Hope for the best!
Click to expand...
Click to collapse
Haha don't mind bringing it up . I asked for help, so I should at the very least be gratefull for every try! So first of all, thank you for your suggestion. I'll send this to my friend an have him take a look at it. I'll keep you updated if it works or not.
SGY white screen HELP!
timmiej93 said:
Haha don't mind bringing it up . I asked for help, so I should at the very least be gratefull for every try! So first of all, thank you for your suggestion. I'll send this to my friend an have him take a look at it. I'll keep you updated if it works or not.
Click to expand...
Click to collapse
plss help me my SAMSUNG GALAXY Y GT-s5360 !! only white screen ?? how cant i fix it ?? i go to the recovery mode but WHite screen also ??
Iam faced same problem on my galaxy y
that is hardware problem
you need to change "DISPLAY IC"
Hello everyone I have bricked my note 2 and suddenly I can't boot because it's stucked on the Samsung Logo. After i installed a font program it said that I had to reboot and then I did.
And then I was trying to recover with "recovery-cwm-6.0.1.5-N7100"
But right now it doesn't display more than Samsung galaxy note 2...
Would be awesome if you guys can help me
Well youre in luck because if it showing a Samsung logo its not bricked.
Second just flash the factory image found in the android development forum. You can do this by booting into download mode by holding the power button and home button and volume down as it boots and then use odin to flash the .tar factory image you just downloaded...its simple really. So dont panic because its entirely fixable!
Just go find a guide on how to flash factory images and youll find step by step Instructions
Sent from my SGH-T889 using Tapatalk 2
ssCISengineer said:
Well youre in luck because if it showing a Samsung logo its not bricked.
Second just flash the factory image found in the android development forum. You can do this by booting into download mode by holding the power button and home button and volume down as it boots and then use odin to flash the .tar factory image you just downloaded...its simple really. So dont panic because its entirely fixable!
Just go find a guide on how to flash factory images and youll find step by step Instructions
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thank you so much! I fixed it as well!
zorritokris said:
use ths stock rom ,this not mine a just put the links all the credit is for teshxx (stock rom) http://forum.xda-developers.com/showthread.php?t=1969551
the guide credit is for Intratech(guide) http://forum.xda-developers.com/showthread.php?t=1671969
i hope that your problem can be fixed
Click to expand...
Click to collapse
Man do not use this stuff this guy posted. That guide and firmware in the guide is for the s3. The first link is good firmware.Hes been posting a bunch of garbage on these forums lately. Im going to report him again before he bricks someones phone giving out wrong firmware links
Sent from my SGH-T889 using Tapatalk 2
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
jonjon68 said:
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
Click to expand...
Click to collapse
Ill tell you a way. Go flash some roms from other phones see what kind of damage that does. Most people dont make efs backups until its too late. See jow many times you can flash in correct roms before you lose that all important imei
Sent from my SGH-T889 using Tapatalk 2
post edited
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
zorritokris said:
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
Click to expand...
Click to collapse
It will be ok i promise everyone gets ,mad sometimes, i did a couple minutes ago:crying: >>>>>>>> Op: when you try to recover from bad situation use odin and this...http://forum.xda-developers.com/showthread.php?t=1975560
zorritokris said:
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
Click to expand...
Click to collapse
Yea well your mistakes cost people money thats the problem. Dont post or give instucrion when you dont know what youre doing. You dont have to post to use this forum. Just read.
What is so hard to understand about this?
Sent from my SGH-T889 using Tapatalk 2
solidvu said:
Hello everyone I have bricked my note 2 and suddenly I can't boot because it's stucked on the Samsung Logo. After i installed a font program it said that I had to reboot and then I did.
And then I was trying to recover with "recovery-cwm-6.0.1.5-N7100"
But right now it doesn't display more than Samsung galaxy note 2...
Would be awesome if you guys can help me
Click to expand...
Click to collapse
If you soft-bricked your phone because you messed up the fonts like me just now, you don't have to reflash the entire ROM!
Instead it's enough to just restore the fonts via one of the zip files found [URL="]http://tips4droid.com/how-to-install-jelly-bean-font-by-flashing-it-through-cwm-recovery/#.US8t2Ddc1ic"here:[/URL]
I copied the zip file to my external SD card and then used CWM Recovery to install it to my phone.
To enter CWM Recovery, press Volume UP, Home and Power Button at the same time.
Hope this is helpful!
Cheers, FW
Although Im sure he appreciates the tip, this thread is almost 4 months old, and Im sure its been fixed and/or replaced by now.
jonjon68 said:
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
Click to expand...
Click to collapse
I had the first note and trust me... the eMMC bug bricked many folks... brick, bricked... bricked
stevessvt said:
Although Im sure he appreciates the tip, this thread is almost 4 months old, and Im sure its been fixed and/or replaced by now.
Click to expand...
Click to collapse
There might be others, such as me, you know...
what i did the other day was.....
i was installing different ROMs. maybe 3 or 4 a day just to get a feel for different ones. Since i am using a t889 on NET10's ATT network, i wanted to ATTEMPT to change over my phones hardware or internal settings to pick up the ATT towers better... my phone is already unlocked for ATT, so whatever im attempting is not needed. not knowing exactly what I'm doing I confused myself a bit. I went to the GooManager recovery page and was wiping all my information so i can install another ROM. while wiping the information off my phone, i was browsing through my SD card i had in the phone and saw a modem pack i put on it. FORGETTING that i just deleted everything i went ahead and just installed the modem pack and rebooted my phone. lol it got stuck on the SAMSUNG GALAXT NOTE 2 page. my MAC, PC & KIES on both weren't picking up my phone via USB. i left the phone attached to my PC and went to get dinner. came back 2 hours later and saw that my phone was connected to the computer. I ran ODIN, put a stock image of tmobiles system on the phone and had to start over with my ROM experiment.
needless to say, i was bummed thinking that i just broke such a nice phone.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
And bricked means brick...paperweight...no life, no lights
I prefer Sponged=soft-bricked means you can odin in stock firmware and restore service
I Just installed Foxhound on my Galaxy S3 and now It wont turn on. At all.
I cant get it in recovery, or download mode.
Any help?
ZiiC said:
I Just installed Foxhound on my Galaxy S3 and now It wont turn on. At all.
I cant get it in recovery, or download mode.
Any help?
Click to expand...
Click to collapse
Unfortunately if the device has absolutely no power at all, the device is considered a "hard" brick. The only ways to recover from a hard brick is using a JIG (possible solution) or a JTAG. JTAG cannot be used by an inexperienced tech and they are expensive to purchase. There are a number of sites that you can send your phone to that will complete the JTAG resurrection for you for around 80.00 USD.
I hard bricked my phone once while flashing CWM and was lucky enough it was within 30 days of purchase. I acted like I didn't know what happened when I got to the AT&T store and they gladly replaced it for me. You can try your luck but no guarantees. Sorry about your luck =(
A note going forward: I was only able to find a i9300 download for foxhound. You are currently in the i747/i747m forum... If you downloaded the i9300 version of Foxhound onto your device (which is for international phones) this is why your phone is no longer functioning.
You cannot flash i9300 ROMs onto USA device variants.
ZiiC said:
I Just installed Foxhound on my Galaxy S3 and now It wont turn on. At all.
I cant get it in recovery, or download mode.
Any help?
Click to expand...
Click to collapse
have u tried to remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery?
RPelham said:
You cannot flash i9300 ROMs onto USA device variants.
Click to expand...
Click to collapse
^^^ This is exactly right. It is a confusing point for many too, especially coming from a GS2 where compatibility was a lot better.
Good point. I probably should have looked into fox hound before I installed it.
I'm on Bell in Canada so I run a i747m.
I guess it's my own fault in the end.
I'll see if I can take it over to the Bell store and see what I can do, otherwise I guess I'll have to send it in to get it unbricked.
Thanks for the help guys.
Let us know what happens.
I've been searching for an answer to this since before Christmas...I haven't found anything that's worked.
I have a T-Mobile Samsung Galaxy S2. I attempted the Jedi Mind Trick Rom (I'm pretty sure that's what it was called...it's been so long I can't really remember all of the details). And my phone hasn't turned on since. I've been told that it's hard bricked and I'm willing to accept that, but I thought before I threw in the towel once and for all I'd see if anyone on here could shed some light on this. When I connect it to my computer, the computer recognizes it and wants me to format it and then tells me it can't format it. Then constantly (like every few seconds) the message pops up (see attached pics). I'm hoping someone out there can tell me if that's normal of a bricked phone or if by some miracle it's holding on by a tiny thread and there's something I can do to revive it. My fiancé and I had the same phone, so I've been able to put a fully charged battery in it, but still nothing. I think I've tried every button combo possible, too. Well...hope someone has some insight on this. Thank you in advance!!!!
A quoted by keithross39:
Ok.....so there are several different levels of "brick"......
Bootloop.....recovery and download modes are both accessible and wiping cache and dalvic will fix the problem....
Softbrick 1....recovery and download modes are accessible, wiping cache and dalvic doesn't solve things but reflashing the ROM in recovery does......
Softbrick 2....Only download mode accessible....flashing a firmware via odin fixes the problem.....
Hardbrick 1.....neither recovery or download modes are accessible, but you still get the battery charging symbol appearing when you plug in your charger....a jig *might* get you into download mode, a jtag *might* also help......
Hardbrick 2 (aka...call in the undertaker).....no recovery, no download, no signs of life even if the charger is plugged in....jig and jtag will NOT help.....mainboard replacement by Samsung the only option......
On that list....where are you? And what were you doing to the phone to cause it?. Also, what firmware/ROM were you on before it went "pear shaped"?.......
Click to expand...
Click to collapse
"To err is human, to forgive is divine"
Sent from my SGS II
Wrong forum (and people here should know that given how many of we get these days). I'm assuming you have a SGH-T989 ? Your thread belongs here, report your OP by clicking the triangle with the ! in the right hand corner & ask mods to move it.
MistahBungle said:
Wrong forum (and people here should know that given how many of we get these days). I'm assuming you have a SHG-T989 ?
Click to expand...
Click to collapse
Point noted mate.
"To err is human, to forgive is divine"
Sent from my SGS II
kellye85 said:
I've been searching for an answer to this since before Christmas...I haven't found anything that's worked.
I have a T-Mobile Samsung Galaxy S2. I attempted the Jedi Mind Trick Rom (I'm pretty sure that's what it was called...it's been so long I can't really remember all of the details). And my phone hasn't turned on since. I've been told that it's hard bricked and I'm willing to accept that, but I thought before I threw in the towel once and for all I'd see if anyone on here could shed some light on this. When I connect it to my computer, the computer recognizes it and wants me to format it and then tells me it can't format it. Then constantly (like every few seconds) the message pops up (see attached pics). I'm hoping someone out there can tell me if that's normal of a bricked phone or if by some miracle it's holding on by a tiny thread and there's something I can do to revive it. My fiancé and I had the same phone, so I've been able to put a fully charged battery in it, but still nothing. I think I've tried every button combo possible, too. Well...hope someone has some insight on this. Thank you in advance!!!!
Click to expand...
Click to collapse
This happen to my t989 after I flash wrong rom so I just call te mobile to replace my phone so they gone send me new one I try everything and nothing work
Sent from my SGH-T989 using Tapatalk 2
For last-ditch recovery attempts I generally recommend installing Kies and seeing if it can do a full factory restore on your phone. It'll write over everything from bad ROMS to bad radios and leave you right at whatever stock is being pushed right now. Then you can re-start the tinkering from that base.
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
datbager said:
SOooO I'm just some tinkering nut that likes to check out all of the roms out there for my devices. Flashing is worse than crack for me. I have bricked de-bricked and re-bricked this poor little galaxy and updated to 4.3 and downgraded back to 4.0 all to make it look like it just came out of the box again. nice clean bootloader. A factory rom. 0 flash count which is simply nutz since this thing should be a stripper I have flashed it with so many Roms and Mods. I have pretty much every file you can think of for this device on my computer and I am more than happy to share my information and tips with the community here at xda.
If you think you need some assistance and don't want to spend 3days hopped up on pizza and mt.dew searching every inch of the forums looking for answers feel free to ask me and I can try my best to help out.
I have almost every custom Rom out for this device.
I have Custom Kernels from chapters 4.0.3 - 4.1.1 - 4.3 - 4.4
I have Debrick Images from the first three chapters will make one for 4.4 when I see a stable Rom
I have Stock Rom Files
I have updated Stock Rom Files.
I have updated rooted no knox Files
I have a crap load of continuous hours of searching breaking and Fixing this poor little thing.
I would have made a Tutorial page but it looks like there are plenty on the forums. I KNOW I've read them all:silly:
so I would rather put my knowledge to use in letting you simply ask me a question and I will reply as quickly as possible.
I know its going to sound nubcake. Buuut.... this is my daily device and I know how frustrating it can be when you have made one of them fatal mistakes and your device goes black or won't flash your new custom rom you want to test out.
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
What spetps I need to do to re flash previous bootloader?... im in 4.3
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I did not do any boot loader flashing. sorry wow first question and I already fail.
If I had to take a wild guess and you still have access to cwm or twrp flash the stock rom and you should be good.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
torreon901 said:
What spetps I need to do to re flash previous bootloader?... im in 4.3
Click to expand...
Click to collapse
If you go from the 4.3 bootloader to a previous one, you will brick your device via an e-fuse. You shouldn't need to revert to an older bootloader anyway unless for a specific rom. If that is the case, you are better off waiting until the developer catches up.
datbager said:
I take no responsibility if you mess up your phone but take a look here. http://forum.xda-developers.com/showthread.php?t=2083860 may be what your looking for.
Click to expand...
Click to collapse
Also, please don't use anything off this page unless you have an international version of the S3. I am guessing you have the I747, DO NOT FLASH SOMETHING NOT MADE FOR YOUR PHONE! :highfive:
Here is where you need to start...http://forum.xda-developers.com/showthread.php?t=2321310
There is even a PSA in red letters about reverting from a 4.3 bootloader.
datbager said:
Shoot some questions my way and see if I can't help you out quicker than you searching the 4 corners of the net.
Click to expand...
Click to collapse
how do you create a debrick.img? My phone is in working condition but I just want to be prepared for down the road
Pretty sure I bricked it
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
thenowherekid said:
I have an ATT Galaxy S3. I had OTA 4.3, and i just rooted it, installed TWRP, and made a backup. Then I wiped, and tried to install a custom rom, and failed. Could not restore back up, and after multiple times of trying to flash this odin : http://forum.xda-developers.com/showpost.php?p=46954804&postcount=119[/URL]. and failed attempts to even get Heimdall to even work, my Phone is now in this state when turned on:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOAD RP SWREV: 2
SWREV CHECK FAIL : Fused 2 > Binary 0
Any help would be grateful.
Edit. More info
I have found I can flash TWRP but I am unable to mount SDCard. it just doesn't do anything. same thing with CWR.
and KIES tries to run a firmware recovery and fails. looks like it trieds to installs 4.1
Still looking for help. Thanks.
Click to expand...
Click to collapse
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
thenowherekid said:
So i was able to get a micro SD card and download the files from here http://forum.xda-developers.com/showthread.php?t=2498233
Used TWRP to install the bootloader/modem, then the rom, then the kernel. After it installed successfully I rebooted the phone. Nothing comes up. It doesn't respond to power button, or download or recovery button sequence. When i plug it into my computer, device manager recognizes it as a port. Qualcomm HS-USB QDLoader 9008 (COM13)
Click to expand...
Click to collapse
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
datbager said:
sorry I didn't ever encounter that in my adventures with the device. I have quickly discovered that there are too many issues with them and the flashing. I have had more problems and bricked states than I care to look at. I got the phone operating and gummy installed on it and left it at that.
Click to expand...
Click to collapse
Thanks.
Sudden Death AT&T GS3
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
thenowherekid said:
Thanks.
Click to expand...
Click to collapse
ok this is not for your device but it is a guide and you can look up a kid that has a video on youtube. scroll down to device firmwares and select your model. but this is the link to help you. http://forum.xda-developers.com/showthread.php?t=2369125
your help
IcemanReturns said:
Hi,
I have an AT&T Samsung Galaxy S3. I was running CM11 nightlies. It was working perfectly fine for all these days. Couple of days back it suddenly died. The phone hasn’t been switching on back since then. I tried putting it on full charge. Whenever I pull out the battery and reinsert it, it vibrates, The LED comes on and the Samsung screen comes on for a second and turn turns off again. I cannot access the recovery or download modes through the key combinations. I also tried going into download mode using a Jig. I have to remove the battery and reinsert it. The Jig did work and the phone did go into download mode but, only for a second and then turns off. I’m not sure what exactly the issue is.
I would be very grateful if you could help me find a solution.
Thanks.
Click to expand...
Click to collapse
once again not for your device but scroll down to stock firmwares and READ the whole guide. There is a kid that makes a video some where arround here as well. http://forum.xda-developers.com/showthread.php?t=2369125 you need a 16gb class 10 sdcard or larger as well for this
Disk Space Back
I had trouble getting my max disk space after I did the debrick trick. So i'm going to shoot a quick tip to get all your space back.
go to your windows start menu and in the search type diskpart and hit enter.
in the command line type "list disk" no quotations and enter.
You should see your hard drive and any other storage devices connected in you computer. Determine which one is the sd card.
Next in the command line hit select disk x. x represents your sdcard.
last is clean disk in command line and your sd card has all its space but you must reformat it how ever you choose.
I just used sd formater.
hope that helps some peeps if so hook a noob up with some thanks clicks. :good:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hmm
trug2002 said:
Hi I have 4.1.1 rooted and twrp and I want to flash the collective rom which is 4.4. I have notbflashed this phone yet but I have done ot before on my captivate. What should I look out for and are there any stepsb I need to take before I flash, I.e. update bootloader etc and if so which one do i use
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
datbager said:
I ended up doing the upgraded bootloader stuff and flashed
Android 4.3 I747UCUEMJ2 for AT&T Galaxy S3 I747
wich you can find here of course I take no credit just showing you where to look.http://wccftech.com/update-att-galaxy-s3-i747-leaked-ucuemj2-android-43-jelly-bean-firmware/
if I help hook a noob up with a thanks click its just a click. :laugh:
Click to expand...
Click to collapse
Can you help me with this? I copied my thread :3
LiLTrippz said:
*I bought this off a friend of mine.*
All he told me was that he tried installing a rom and he thinks that he installed a rom for a different model S3.
What Happens/What I Did?
1. I tried to plug it into the computer and the computer doesn't show that anything plugged in, the S3 doesn't turn on. NOTHING.
2. I connected the phone to the PC without the battery inside and the phone responds with one RED light at the top left of the phone. Nothing shows up on my computer still, not even that the phone was connected NOTHING.
3. I bought a JIG device and tried plugging it into my phone and it doesn't work. (I previously tested this JIG on another samsung device and it worked)
4. I tried doing the method to use a 16gb SD card and downloading an i747m debrick IMG and using Win32FlashTool to copy it to my SD Card. I tried with 2 different cards the first one was a 16gb SD card and the other was a 32gb SD card.
5. Through a lot of research I found a leaked way to unbrick the Samsung Galaxy S3 i9300 by shorting out the R313 chip, I'm sure you guys are all aware of this method. I opened my device and couldn't find the R313 chip. After further research I found that a user was able to locate the R313 chip on the i747m and he'd unbricked his phone with that method. If anyone can help me locate the i747m R313 chip it'd be GREATLY appreciated!
If anyone can help me out it would be great! I'm very experienced at soldering so if there's a method that requires me to solder I'm more than confident I can do it.
Thank you!! :good:
Click to expand...
Click to collapse
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
trug2002 said:
i have the dlk3 boot loader do I need to go to mjb?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am not an expert but I'm pretty sure you need the mjb2 but there are guides all over that point misleading information. I can post a link that I believe is helpful. And as always I take no credit just pointing a finger here.
http://www.usofttech.com/t51443.html
:good: