[UNRESOLVED / CLOSED] Friend of mine getting a white screen - Galaxy Y GT-S5360 General

EDIT - No sollution found!!
Please examine this thread if you have similar problems, but please don't ask how we got it fixed. The phone was just done for, dead, bricked, whatever you want to call it.
Good luck with yours!
Trying to ad a horizontal rule, but this'll do.
Click to expand...
Click to collapse
Orriginal post below.
Hey people,
A friend of mine is getting a white screen on his Galaxy Y, can't do anything with it. Even a hard reset (as found on the internet) doesn't work. (Hard reset being holding volume up, center button and power button).
Does anyone have experience with this problem?
Tim
Click to expand...
Click to collapse

First state what happen?
Try remove battery and power on again. If its not work try volume down home button then power button. If the download mode appears flash stock rom again using odin..
Sent from my GT-S5360 using xda premium

timmiej93 said:
Hey people,
A friend of mine is getting a white screen on his Galaxy Y, can't do anything with it. Even a hard reset (as found on the internet) doesn't work. (Hard reset being holding volume up, center button and power button).
Does anyone have experience with this problem?
Tim
Click to expand...
Click to collapse
Thats NOT a hard reset! Pull the battery, and insert it again. Now do your "hard reset". As in, holding volume up+home+power key together until you see the Samsung logo. Do a data wipe and restart. If that doesnt work, search for flashable firmware packages in the Development section. If that doesn't work either, replace your phone.

Hey guys,
Thank you both for your replies.
rockerblood said:
First state what happen?
Try remove battery and power on again. If its not work try volume down home button then power button. If the download mode appears flash stock rom again using odin..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Stating what happened: He just suddenly had a white screen, unable to do anything with the phone. Rebooting, pulling the battery etc. didn't do anything.
Your second option didn't work either unfortunatly.
Raol Emostar said:
Thats NOT a hard reset! Pull the battery, and insert it again. Now do your "hard reset". As in, holding volume up+home+power key together until you see the Samsung logo. Do a data wipe and restart. If that doesnt work, search for flashable firmware packages in the Development section. If that doesn't work either, replace your phone.
Click to expand...
Click to collapse
Sorry about that, I just read in about this phone, since it's not mine, and I already forgot about the second part.
Unfortunately, neither of this works. Every boot method gets him a white screen. Since he rooted his phone about a week ago, looks like he's going to need a new one.

timmiej93 said:
Hey guys,
Thank you both for your replies.
Stating what happened: He just suddenly had a white screen, unable to do anything with the phone. Rebooting, pulling the battery etc. didn't do anything.
Your second option didn't work either unfortunatly.
Sorry about that, I just read in about this phone, since it's not mine, and I already forgot about the second part.
Unfortunately, neither of this works. Every boot method gets him a white screen. Since he rooted his phone about a week ago, looks like he's going to need a new one.
Click to expand...
Click to collapse
try flashing the ROM using Odin from the PC

Might Odin be the same as Samsung Kies in dutch? Or is this an external program?
Assuming it's this program: http://odin-win.sourceforge.net/
Now how does this work? I've been flashing my phone for quite a while now, but I'm not familiar with this program. Can I just download a ROM (stock) from the developers part here?

timmiej93 said:
Might Odin be the same as Samsung Kies in dutch? Or is this an external program?
Assuming it's this program: http://odin-win.sourceforge.net/
Now how does this work? I've been flashing my phone for quite a while now, but I'm not familiar with this program. Can I just download a ROM (stock) from the developers part here?
Click to expand...
Click to collapse
its a tool for windows which lets you flash firmwares. You need to connect your phone to your pc is download mode.
Search Google and you will get lots of tutorials explaining the process.
Sent from my SK17i using xda app-developers app

Okay thanks for all your help guys.
My friend tried everything you people suggested, but nothing worked. He just had an expert look at it and it's just totally bricked. Gotta buy a new one. Thanks for trying anyway!

Sorry for bringing this up again, but I kinda feel sorry when people brick their devices. Yours doesnt have to be a brick. Read this. The instructions are on the first page. There's a link to Odin too. Hope for the best!

Raol Emostar said:
Sorry for bringing this up again, but I kinda feel sorry when people brick their devices. Yours doesnt have to be a brick. Read this. The instructions are on the first page. There's a link to Odin too. Hope for the best!
Click to expand...
Click to collapse
Haha don't mind bringing it up . I asked for help, so I should at the very least be gratefull for every try! So first of all, thank you for your suggestion. I'll send this to my friend an have him take a look at it. I'll keep you updated if it works or not.

SGY white screen HELP!
timmiej93 said:
Haha don't mind bringing it up . I asked for help, so I should at the very least be gratefull for every try! So first of all, thank you for your suggestion. I'll send this to my friend an have him take a look at it. I'll keep you updated if it works or not.
Click to expand...
Click to collapse
plss help me my SAMSUNG GALAXY Y GT-s5360 !! only white screen ?? how cant i fix it ?? i go to the recovery mode but WHite screen also ??

Iam faced same problem on my galaxy y
that is hardware problem
you need to change "DISPLAY IC"

Related

Help Please

I rooted my phone and somehow messed it up. I took it to sprint but they told me since I have custom roms they wont be able to help me. The guy at the store pointed me this way. He said something about stuck power cycle on splash screen. I need to get back to the original roms. Before this happen the phone was on android 2.2
Thank you soo much
Abdi said:
I rooted my phone and somehow messed it up. I took it to sprint but they told me since I have custom roms they wont be able to help me. The guy at the store pointed me this way. He said something about stuck power cycle on splash screen. I need to get back to the original roms. Before this happen the phone was on android 2.2
Thank you soo much
Click to expand...
Click to collapse
Best fix, is to ODIN back to stock and start over. If you flashed a ROM, you could try going into CWM and wiping data/cache/dalvik and reflashing...
Go to Development section and follow the thread near the top in the stickies regarding how to fix a semi bricked epic.
Sent from my SPH-D700 using XDA App
adamdelozier said:
Best fix, is to ODIN back to stock and start over. If you flashed a ROM, you could try going into CWM and wiping data/cache/dalvik and reflashing...
Click to expand...
Click to collapse
How do I do that, will you be able to post a link on how to do that. much appreciated
Abdi said:
How do I do that, will you be able to post a link on how to do that. much appreciated
Click to expand...
Click to collapse
Here is the post Kenny was referring to.
http://forum.xda-developers.com/showthread.php?t=1052813
Thank you very much, you guys are the best
How do I get the phone into download mode???
Abdi said:
How do I get the phone into download mode???
Click to expand...
Click to collapse
With the phone off, press and hold the 1 key on the physical keyboard then add pressing and holding the power button. Yellow triangle saying download mode will pop up. Then you connect the cable to the PC with Odin or Heimdall running.
Sent from my SPH-D700 using XDA App

Nexus completely dead (just black screen)

After switching to a new rom and changing kernel my screen freezed quite a lot. I couldn't boot into CWM. So I tried to install a stock rom. Half way through Gnex Toolkit gave me a "too many links" error. The phone rebooted and than... nothing. Just a black screen, no Google logo, no battery logo. When I hit the power button (with or without volume button(s) combination) nothing happens. Completely dead. I'm pretty sure I'm #####. Maybe somebody still has a magic trick.
omron2010 said:
After switching to a new rom and changing kernel my screen freezed quite a lot. I couldn't boot into CWM. So I tried to install a stock rom. Half way through Gnex Toolkit gave me a "too many links" error. The phone rebooted and than... nothing. Just a black screen, no Google logo, no battery logo. When I hit the power button (with or without volume button(s) combination) nothing happens. Completely dead. I'm pretty sure I'm #####. Maybe somebody still has a magic trick.
Click to expand...
Click to collapse
Did you remove the battery and try to power it on again? If you tried that does it at least turn on? That helped me once.
Sent from my Galaxy Nexus using xda app-developers app
I don't think you're in trouble just yet. Read a post earlier today describing a similar situation. I think they were able to use OMAP4 or maybe Odin to get everything sorted out. Search "softbrick" here on XDA and see what you come up with. Sorry I don't have a link handy. This is probably going to take a little time and a lot of reading. Don't panic though. From everything I've read the GNex is Really hard to brick permanently. There are way more options for correcting a softbrick than my Evo had. One thing to check from the thread this morning. Pull your battery out, open the device manager on your computer, and connect the phone with the USB cable. You may very briefly see something like OMAP****. It will abort whatever it's trying to do, but it's a good sign. Means there's still something left on your phone that the PC can try to communicate with. Just make sure you read and understand the guides.
Sent from my Galaxy Nexus using xda premium
breadland said:
Did you remove the battery and try to power it on again? If you tried that does it at least turn on? That helped me once.
Click to expand...
Click to collapse
I tried that. Didn't do anything. Black screen, nothing happens when I push the power button.
http://forum.xda-developers.com/showthread.php?t=1760787 <--- do what he did
kunalwanvari said:
http://forum.xda-developers.com/showthread.php?t=1760787 <--- do what he did
Click to expand...
Click to collapse
That was the one I saw this morning. Thanks for sharing it here.
Sent from my Galaxy Nexus using xda premium
u can always test usb-jig to get in download (odin) mode. It doesn't harm to try.
kunalwanvari said:
http://forum.xda-developers.com/showthread.php?t=1760787 <--- do what he did
Click to expand...
Click to collapse
I did what he did last night. I got into fastboot again (no recovery mode, no normal boot). When trying to issue fast boot commands I got the "too many links" errors. Also the screen would show artefacts (strange thin stripes as if the GPU was having trouble). As a last resort I tried ODIN (not recommended, only as last resort, you have been warned!). And flashing through Odin gave errors as well... So still stuck. BTW Now I don't have a fastboot and downloading mode anymore. I think Odin screwed this up. Is there a way to restore this?

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

[Q] Few questions from a Noob

Hello, since I had my sprint lg optimus g, I played a lot with it, because we don't have sprint here in Venezuela, so I had to set the phone to be used here. It seems that i play too much whit it and bring it to a hard brick, the phone does nothing, not even recognized by the pc. So I wonder if this can be arranged in any way? If the screen of this model can be put to the international model with no problems? If the logic board of the international version can work with the rest of the hardware of this version? In advance thank you very much.
SalomnA said:
Hello, since I had my sprint lg optimus g, I played a lot with it, because we don't have sprint here in Venezuela, so I had to set the phone to be used here. It seems that i play too much whit it and bring it to a hard brick, the phone does nothing, not even recognized by the pc. So I wonder if this can be arranged in any way? If the screen of this model can be put to the international model with no problems? If the logic board of the international version can work with the rest of the hardware of this version? In advance thank you very much.
Click to expand...
Click to collapse
how did you hard brick it..
krishnanmailbox1 said:
how did you hard brick it..
Click to expand...
Click to collapse
Well i was exploring in the hidden menu on the phone and i push in something like a update, after that the phone just can be in the recovery, i made a restore much times, format everithing and put it a custom rom, but nothing works. So i start to search for help here in XDA but no one have pass something like that i thing, and after i search in google, i dowload a file name it recovery go out or something like that, after that the phone doesn't do nothing, like a said the pc don't recognized, no nothing :crying:
SalomnA said:
Well i was exploring in the hidden menu on the phone and i push in something like a update, after that the phone just can be in the recovery, i made a restore much times, format everithing and put it a custom rom, but nothing works. So i start to search for help here in XDA but no one have pass something like that i thing, and after i search in google, i dowload a file name it recovery go out or something like that, after that the phone doesn't do nothing, like a said the pc don't recognized, no nothing :crying:
Click to expand...
Click to collapse
are you able to get into recovery...???
krishnanmailbox1 said:
are you able to get into recovery...???
Click to expand...
Click to collapse
No i'm not :crying:
SalomnA said:
No i'm not :crying:
Click to expand...
Click to collapse
What happens when you hold volume down button and power together? It should bring up the factory recovery and you should be able to do a hard reset. Press power again to do the reset.
dopy25 said:
What happens when you hold volume down button and power together? It should bring up the factory recovery and you should be able to do a hard reset. Press power again to do the reset.
Click to expand...
Click to collapse
No i try it, but it doesn't do nothing

[Q] I think I completely bricked (?) my phone[SOLVED]

I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
potatobobguy said:
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
Click to expand...
Click to collapse
this guy had a similar problem, take a look, at this thread
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
potatobobguy said:
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
Click to expand...
Click to collapse
Such a great news :good:
You can update thread name with [Solved] tag I guess, It may help somebody else
The f*ck
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Alan Revuelta said:
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Click to expand...
Click to collapse
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
potatobobguy said:
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
Click to expand...
Click to collapse
Flasmode doesn't work.

Categories

Resources