Develop Bugs

Galaxy s3 on Rogers JB 4.1.2

HI I ave been trying to root my phone with odin and the toolkit and cf-autoroot, the cf auto root reported success but I still do not ave root acces for titanium backup. Odin does not work doe not matter what version I use,I have installed the drivers and you can see the installation and it goes into boot mode but stalls at "Getting PIT or Mapping then fails. I have switched usb ports changed usb cords enabled usb connection through developer options and removed samsung KIes.I just am out of options and don't know where to turn to get root access on this phone. Any other suggestions?
heres the info
android 4.1.2
Model SGH i747M
baseband version 1747mvldmf1
Kernel version 3.0.31-1189444-user
Build number jz054ki747mvldmf1
I have tried using windows 2000 pro as I have dual boot on this laptop and cannot get the drivers to load, also tried compatibilty mode in xp and all the updates are installed
here is the odin screen:

Does anyone out there have an explanation. Please?
I am running Windows xp with all the updates, the drivers are installed, both of them, when I run Odin on this galaxy s3 jb 4.1.2, I get to the same point in Odin, it stops at mapping pit, and I don't have the time or experience to find a solution, developer USB access is checked, can anyone offer up another solution. I am also running a memory card of about 30 gig. Only thing I have done all update ota.
Thanks

[Q] Bricked the device, can't boot up or get into recovery, ODIN not working...

Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris

If it says just "Downloading..." when you enter in download mode, it's perfectly OK!!!
Steps to bring your phone back to life:
1) Enter Download Mode
2) Connect Phone to PC through USB Cable (though it's the only way, now)
3) Download a Stock ROM
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
5) Flash it and wait
I can provide you any files you need and even TeamViewer support, just tell me!
P.S.: I have revived my phone about 10 times so far because I've tested almost every ROM for our Gio!

3) Download a Stock ROM
Click to expand...
Click to collapse
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
Click to expand...
Click to collapse
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
I can provide you any files you need and even TeamViewer support, just tell me!
Click to expand...
Click to collapse
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris

FauserneEist said:
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris
Click to expand...
Click to collapse
Well, i can provide teamviewer support too as i have done it on windows 8 myself, My Timezone is GMT + 5.00

I have been able to repair the device by myself. I used an old Windows XP machine and did exactly what I did on my Windows 8 machine. Worked like a charm... At this point I have to assume that Odin does not play well on 64 bit machines...

same
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.

moosavi12 said:
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.
Click to expand...
Click to collapse
what ODIN Version are you using?

waqaswasil said:
what ODIN Version are you using?
Click to expand...
Click to collapse
4.42
and tried by 3 versions, But not effective.

moosavi12 said:
4.42
and tried by 3 versions, But not effective.
Click to expand...
Click to collapse
keep in mind that you have to "wipe data/factory reset" from stock recovery first time after flashing stock ROM with odin otherwise it will not boot up!

FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris
Click to expand...
Click to collapse
Did you set USB Debugging to be on? http://forum.xda-developers.com/showthread.php?t=961956
try this
http://forum.xda-developers.com/showthread.php?t=1573628
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android...for-your-phone
Download GIO_v1.0,ops:http://HERE

FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
Thanks in advance
Chris
Click to expand...
Click to collapse
Try this ROM_ http://forum.xda-developers.com/showthread.php?t=2715301
Gio_Gapps-KK-4.4.0-Signed.zip_http://d-h.st/Uts
install this mod_http://forum.xda-developers.com/gala...ition-t2360985
sorry but my english is bad

I'm GMT +3 (Bucharest). If you want me to make your phone running at its possibly best then give me a private message and I'll help you with everything you need.

[Q] I Killed My 12.2 (SM-T900). Please Help

I got the Tab Pro 12.2 a couple of weeks ago (refurb). It worked flawlessly, so I decided to root it, etc. It no longer works.
Two points.
(BOOT 1) - On a 'normal' boot it will get past the blue swirl with about 1 second of audio, then stops with "SAMSUNG" on the screen.
(BOOT 2) - On a Pwr on/Vol- (hard) boot, it will come up with "press vol +)" at which time it boots to ODIN. No way can I get it to boot to TWRP (see following)
Conditions: Windows 10 Tech Preview, Dell XPS 18 (USB 2 and 3), latest USB driver from Samsung, ODIN 3.10, Kies 3. The tablet connects with ODIN.
I loaded CF-Auto-Root (CF-Auto-Root-v2wifi-v2wifixx-smt900.tar.md5). Success, BUT tablet reboots to BOOT 1, above.
I loaded "openrecovery-twrp-2.8.5.0-v2wifixx.img.tar". Success, BUT reboots to BOOT1 above.
If I do a "hard" boot, I'm back with ODIN. TWRP won't boot. Tried the same with CWM (getting stupid here). Boots to ODIN. Basically, I can't boot into any recovery program.
Tried loading "SM-T900_XAR_1_20140508111550_703bt27ewy.tar". Again, loads but no joy.
Loaded the original ROM from SamMoblie. Again, no dice.
Am I screwed or what? Please help if you can. Thanks.
-- CatHerder12

Try a different ODIN version.
I've come up with something similar in the past.
ODIN reports OK but nothing is really written to the Tab.

guanellaluigi said:
Try a different ODIN version.
I've come up with something similar in the past.
ODIN reports OK but nothing is really written to the Tab.
Click to expand...
Click to collapse
Thanks for the reply. I have tried a few versions of ODIN. One or two of the older ones didn't work at all.. Currently using 3.10.6. Maybe I'll go back and retry a couple.
With tablet in download mode: I tried Kies and it reported the tablet as an unrecognized device. Tried ADB. It didn't see the tablet at all.
Any great insights (or guesses) would be appreciated!
Thanks

CatHerder12 said:
Tried ADB. It didn't see the tablet at all.
Any great insights (or guesses) would be appreciated!
Thanks
Click to expand...
Click to collapse
Plug in the Tab and check in your computer device manager list that the device shows connected to the USB port and the drive installed is Samsung Android ADB Interface, if it isn't change it to this driver.
Make sure you are using the original USB cable and its plugged directly into the PC and not via any Hubs.

CatHerder12 said:
Thanks for the reply. I have tried a few versions of ODIN. One or two of the older ones didn't work at all.. Currently using 3.10.6. Maybe I'll go back and retry a couple.
With tablet in download mode: I tried Kies and it reported the tablet as an unrecognized device. Tried ADB. It didn't see the tablet at all.
Any great insights (or guesses) would be appreciated!
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=50492301#post50492301
Try loading this in odin(P900XXUANB3-RecoveryImg.tar) then see if you can get into stock recovery and wipe cache and data to return to default settings. See if your stock rom loads.... If so then
flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 in odin then reboot
If all is working then flash
openrecovery-twrp-2.8.0.0-v2wifixx.img.tar
instead of the openrecovery-twrp-2.8.5.0-v2wifixx.img.tar( this seemed to not load on my tablet pro 12.2)
See if it boots up for you.
Then you can install custom rom if you want from twrp.

jvilla785 said:
http://forum.xda-developers.com/showthread.php?p=50492301#post50492301
Try loading this in odin(P900XXUANB3-RecoveryImg.tar) then see if you can get into stock recovery and wipe cache and data to return to default settings. See if your stock rom loads.... If so then
flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 in odin then reboot
If all is working then flash
openrecovery-twrp-2.8.0.0-v2wifixx.img.tar
instead of the openrecovery-twrp-2.8.5.0-v2wifixx.img.tar( this seemed to not load on my tablet pro 12.2)
See if it boots up for you.
Then you can install custom rom if you want from twrp.
Click to expand...
Click to collapse
Hi guys
, i had the same problem, but i follow ur steps and it worked. the only diference i installed the twrp-2.8.5.0-v1awifi.img.tar and it stuck, i have the SM-T900, v2wifi and it is working.
All the other didint stuck
thanks

jvilla785 said:
http://forum.xda-developers.com/showthread.php?p=50492301#post50492301
Try loading this in odin(P900XXUANB3-RecoveryImg.tar) then see if you can get into stock recovery and wipe cache and data to return to default settings. See if your stock rom loads.... If so then
flash CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 in odin then reboot
If all is working then flash
openrecovery-twrp-2.8.0.0-v2wifixx.img.tar
instead of the openrecovery-twrp-2.8.5.0-v2wifixx.img.tar( this seemed to not load on my tablet pro 12.2)
See if it boots up for you.
Then you can install custom rom if you want from twrp.
Click to expand...
Click to collapse
Thanks for the advice. I couldn't find a download link for the 2.8.0.0 but found openrecovery-twrp-v1a3gxx.img.tar. I'm guessing it's for a 3G version but it works. I used ODIN3 v3.10.6.exe on the PC. So far, I have twrp and the stock ROM running and everything works nicely. I still haven't managed to root it. Keeps getting stuck on cache. Can it be rooted after twrp has been loaded?
I actually may try to use the tablet for a while instead of continually poking and reloading it.

Erase some apk with adb and stuck on reboot

Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you very much for you help.

dr.rokr said:
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you
Click to expand...
Click to collapse
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.

TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tried the 3 USB ports in the laptop
What else can be happening?
Thank you very much!

dr.rokr said:
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tryed the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
Click to expand...
Click to collapse
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.

bruno2030 said:
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
Click to expand...
Click to collapse
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do

dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
go to the recovery.
connect to the PC.
open odin.
click on "reboot to bootloader"
It should go to to download mode.
what does your download mode screen say?
When I was doing this process I tried reflashing the latest rom but that didn't solve my boot loop issue.
So I flashed an older version of the rom.
Make sure the version you download is compatible with your phone.
You have G9650ZHU9FUG2 so only roms with 9 will work.
I flashed that old version and it didn't work, phone still stuck.
Then I flashed the latest one again and then my phone worked.
I used odin from the link you posted.
Odin3 v3.13.1

actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it

dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
TormentedHeart said:
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
Click to expand...
Click to collapse
Hi! I have uninstalled everything and then install the drivers again without luck

TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! Today I have successfully flashed the exact firmware that the phone had ( there is no newer) using a different laptop (it's true if the problem persist with Odin, use another laptop)
I got success message, at the very first time, and when the phone reboot, nothing , stuck as it was before, so I erased cache partition and no luck, still stuck on reboot, I have also tried repair apps , and reboot sistem now, what else should I do?
Thank you very much!

Hi! I want the community to know that using the APK adb app for Samsung it's a bad idea, after successfuly flashing the firmware and performing a factory reset several times the phone remain stucked, I downloaded about 10 different firmwares and flash them all times without an error, and the phone was bricked and stuck in boot. So I took it to the official service and nothing, still the same, then I found an external service that flash the device with a little box that they said they paid in advance for credits for using that box, it took them one full week to revive the phone, also they had to flash it several times. In conclusion, if you buy Samsung, stick with the garbage apps the throw, if you mess with the system in some way as the official technician said, the phone will be nearly unrecoverable for privacy benefits for the user. Thank you very much for the help to the community!

Boot loop after SD card problem - can't reinstall stock firmware

Turning to this forum in desperation after many failed attempts to use Odin to reinstall the stock firmware for my SM-T830.
Like others, my previously perfectly-functioning Galaxy Tab S4 got stuck in a boot loop after attempting to move apps to the microSD card. Unlike many others, I have never tried to root the tablet or do anything with TWRP, custom firmware and the like.
I have got the tablet into download mode and tried using various versions of Odin to attempt to reinstall the stock firmware files (BL, AP and CSC successfully downloaded by Frija - no CP file exists for this device), but Odin always gets stuck at the "SetupConnection" stage and then eventually fails with a "Complete(Write) operation failed" error. Possibly an FRP lock issue?
I've tried several different USB cables for this. Any help appreciated.

Hi, did you find a solution to this?
Have you installed the Samsung USB drivers?

simmo1221 said:
Hi, did you find a solution to this?
Have you installed the Samsung USB drivers?
Click to expand...
Click to collapse
Nope, no solution yet. Yes I had the drivers installed and the tablet was showing up fine in Odin.
I've taken it into a shop to see if they can fix it.