Related
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris
If it says just "Downloading..." when you enter in download mode, it's perfectly OK!!!
Steps to bring your phone back to life:
1) Enter Download Mode
2) Connect Phone to PC through USB Cable (though it's the only way, now)
3) Download a Stock ROM
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
5) Flash it and wait
I can provide you any files you need and even TeamViewer support, just tell me!
P.S.: I have revived my phone about 10 times so far because I've tested almost every ROM for our Gio!
3) Download a Stock ROM
Click to expand...
Click to collapse
4) Open ODIN, wait it to detect your phone, select the stock rom's archive, select the OPS required
Click to expand...
Click to collapse
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
I can provide you any files you need and even TeamViewer support, just tell me!
Click to expand...
Click to collapse
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris
FauserneEist said:
My Problem so far is that ODIN won't recognize my phone. I think it is a problem with Windows 8, it says the driver doesn't exist. I tried installing the Samsung driver package but even then, the phone is just recognized as "Unknown Device". The Samsung package contains about 20 folders, so I didn't know which driver to force install.
That would be really nice, if I can't fix it myself. Can you tell me in which timezone you live, so I can plan accordingly?
Many thanks
Chris
Click to expand...
Click to collapse
Well, i can provide teamviewer support too as i have done it on windows 8 myself, My Timezone is GMT + 5.00
I have been able to repair the device by myself. I used an old Windows XP machine and did exactly what I did on my Windows 8 machine. Worked like a charm... At this point I have to assume that Odin does not play well on 64 bit machines...
same
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.
moosavi12 said:
Hi
My phone have the same problem
It just get into download mode
When I try via Odin
it detects and pass
But in Comments After reboot message Write kill time... error.
and don't boot up.
Please put the your stuck Rom and Cwm Links.
Click to expand...
Click to collapse
what ODIN Version are you using?
waqaswasil said:
what ODIN Version are you using?
Click to expand...
Click to collapse
4.42
and tried by 3 versions, But not effective.
moosavi12 said:
4.42
and tried by 3 versions, But not effective.
Click to expand...
Click to collapse
keep in mind that you have to "wipe data/factory reset" from stock recovery first time after flashing stock ROM with odin otherwise it will not boot up!
FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
The device won't get past the Samsung logo upon normal boot. When I enter
the download mode, the screen looks different than any screenshot I have found
so far. Most people say you get a warning, that download mode is dangerous, etc.
but my device just says "Downloading..." in a yellow font. Windows won't discover
it at all, even with installed Samsung drivers and on Linux I was able to detect it
using Heimdall, but flashing it failed with the error "Failed to initialize protocol".
Does anyone have any idea what I could try to do next? I'm getting pretty desperate
right now...
Thanks in advance
Chris
Click to expand...
Click to collapse
Did you set USB Debugging to be on? http://forum.xda-developers.com/showthread.php?t=961956
try this
http://forum.xda-developers.com/showthread.php?t=1573628
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android...for-your-phone
Download GIO_v1.0,ops:http://HERE
FauserneEist said:
Hi,
I tried to install CM11 on my Galaxy Gio, but I ran into several problems.
First I managed to flash CM11 from an old clockwork mod version.
However the system did not boot up correctly, so I tried to use a newer
recovery version. That failed as well and now I am stuck without a working recovery.
Thanks in advance
Chris
Click to expand...
Click to collapse
Try this ROM_ http://forum.xda-developers.com/showthread.php?t=2715301
Gio_Gapps-KK-4.4.0-Signed.zip_http://d-h.st/Uts
install this mod_http://forum.xda-developers.com/gala...ition-t2360985
sorry but my english is bad
I'm GMT +3 (Bucharest). If you want me to make your phone running at its possibly best then give me a private message and I'll help you with everything you need.
OK, I did search and found nothing. So, I need to ask this somewhere, hopefully this is the place. The similar threads search did not seem to help much.
I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode is it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process. I've yet (until now) had the privilege of having a wreck like this one.
So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen (EDIT: I left it there for an hour or so to see if boot would finish before disconnection). I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything. The power button starts up the phone in an initially normal manner, but it goes right to SAMSUNG in a black screen.
EDIT 2: I used the Cellular South firmware, saw nothing else US and thought I remembered reading this was what worked here.
There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.
Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
DUHAsianSKILLZ said:
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
Click to expand...
Click to collapse
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
SteveC485 said:
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
Click to expand...
Click to collapse
What I mean is to flash twrp with odin then flash zips with twrp. If you cant reboot into recovery, if you installed adb then yoi can do adb reboot recovery.
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
senel said:
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
Click to expand...
Click to collapse
Thanks. When Christmas stuff winds down, I will give Odin a go. Thanks to both of you who answered. Merry Christmas.
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
SteveC485 said:
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
Click to expand...
Click to collapse
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
DUHAsianSKILLZ said:
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
Click to expand...
Click to collapse
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
SteveC485 said:
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
Click to expand...
Click to collapse
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
DUHAsianSKILLZ said:
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
Click to expand...
Click to collapse
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
DUHAsianSKILLZ said:
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
Click to expand...
Click to collapse
Thanks, that's what I thought.
For whatever reason, this time the power, home, and volume up combination booted me into TWRP. Restored a backup and everything is up and running normally (at least so far).
I'm perfectly willing to admit error,but don't quite know where my error came in. I would swear I used the power, volume up, and home combination when I hit the download mode. But maybe not. I don't know why it worked now, except that I was inadvertently hitting the wrong combination, thinking I was doing it right. I remember thinking the first time it went to download mode, that I just did it wrong and used the wrong volume key. Thought I was more careful the succeeding tries.
At any rate thanks for the help. I will remember this particular lesson for a while .
hard brick
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
faztecnyk said:
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2838473
DUHAsianSKILLZ said:
Try this http://forum.xda-developers.com/showthread.php?t=2838473
Click to expand...
Click to collapse
Thanks.. but I said hard brick and not soft brick..
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
A lot of Tab S owners have had issue with TWRP 2.8.3. There is another thread on it. I installed 2.8.3 with Odin and it was pretty wonky. Went right back to 2.8.1.
If none of the methods worked for anyone try this. If your tablet keeps trying to boot into twrp or stuck at the galaxy tab s screen try this if you cant boot into download mode.
Let completely die. Then put it in the charger and quickly press the combination of buttons to get into download mode. That should over ride booting into twrp. another way is to plug it into your computer and try different combinations of buttons.
I have the samsung galaxy tab s 8.4 and I rooted it a few days ago and I thought to myself lets install a custom recovery, but before I did that I backed up my stock kernal and my stock recovery through flashify, also im on stock firmware, after I backed those things up I installed twrp 2.8.3.0 and I booted into recovery to back up my rom and data just in case I soft bricked my tablet like I used to do on my nexus 7, when trying to boot into twrp it went in to boot loop I have tried all button combination I know and have seen in this thread but none works except for going into download mode. I dont know if I should flash an older version of twrp and see if it works or should I install stock firmware on my device and im not sure what version of odin I should use if I flash a older version of twrp. The version I used to root my tablet is 3.07 of odin.
Hi Guys,
After playing with a lot of different roms on this tablet, i was content with CM12. I thought also now would be a good time to update TWRP from the ROM itself. So, i downloaded the TWRP manager, told it my device and told it to update. It asked me if the location for recovery was ok, and i (assumed....so its me being stupid) told it it was.......
Now my tablet wont boot anymore, i only get to see the "downloading" screen with the android dude. I love the android dude, but not so much that he's all i want to see
I tried using odin to re-apply the TWRP file from there, but it just is stuck at "initialization". I tried doing the same with the stock firmware from Sammobile, but the same thing happens.
I know there HAS to be a way to get it working again as it is still powering on...but i am running out of ideas. Can anyone please help me? If you're in town i will treat you to a nice Jopen bier
Thanks guys,
Yves
yvessparks said:
Hi Guys,
After playing with a lot of different roms on this tablet, i was content with CM12. I thought also now would be a good time to update TWRP from the ROM itself. So, i downloaded the TWRP manager, told it my device and told it to update. It asked me if the location for recovery was ok, and i (assumed....so its me being stupid) told it it was.......
Now my tablet wont boot anymore, i only get to see the "downloading" screen with the android dude. I love the android dude, but not so much that he's all i want to see
I tried using odin to re-apply the TWRP file from there, but it just is stuck at "initialization". I tried doing the same with the stock firmware from Sammobile, but the same thing happens.
I know there HAS to be a way to get it working again as it is still powering on...but i am running out of ideas. Can anyone please help me? If you're in town i will treat you to a nice Jopen bier
Thanks guys,
Yves
Click to expand...
Click to collapse
What Device you have? When you flash TWRP with Odin, do you uncheck Auto Reboot? I always uncheck it then power off then press Power, Home and Vol up to boot TWRP. Maybe no help.
Rooted i747 said:
What Device you have? When you flash TWRP with Odin, do you uncheck Auto Reboot? I always uncheck it then power off then press Power, Home and Vol up to boot TWRP. Maybe no help.
Click to expand...
Click to collapse
Sorry, Samsung galaxy tab pro 10.1, sm-t520 aka picassowifi.
Auto reboot does not change anything... Still stops at 'initialization'.
I cannot get anywhere else but the downloading screen...
Thanks so far
I know you can't take the battery out but I been reading to let it die. Then plug it in works for some.
Note 4 Port Evolution 3.0
I drained it...when I get home I will try the Odin method. I'm starting to worry though....
Thanks again
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
yvessparks said:
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
Click to expand...
Click to collapse
Glad it's working! :good:
How to drain battery?
Good to hear it worked for you but how did you drained the battery. I dont know how to drain it if I cant use the tablet ( and I believe my tablet is fully charged)
I am in a similar situation.
I have SM-T900 (Galaxy Tab PRO 12.2) and when I flashed TWRP 2.8.7.0 (for v2wifixx) for the first time over the stock recovery. It was successful and booted into recovery, but then it was not able to wipe any data. It gave some errors which I do not remember right now.
Then I tried re-flashing the same but it is not booting back into recovery, anymore after more than 5 attempts. When am re-flashing the TWRP, it is showing SUCCESS in Odin but the device is not booting into recovery. Current situation is that I cannot power it off nor boot into recovery. All it is allowing me is to get into download mode. Also, I have Kies 3/Smart Switch installed and NONE of them is recognizing the device in download mode either. However, am able to login to the download mode and reflash the twrp recovery image file.
Currently, opened the back cover and removed the battery connector and re-connected it and that is only way I could get the power off. I will try to re-flash TWRP again in the evening today.
I am posting here to ask for any other ideas. Is there anything else that I can try?
Thanks.
yvessparks said:
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
Click to expand...
Click to collapse
Finally fixed the issue.
I downloaded the firmware from www.sammobile.com for SM-T900 (Cellular South) having the PDA version as T900UEUBOI2 and this is for US. I downloaded the latest (v5.1.1) as of this writing.
I switched ON the tab in download mode and connected to computer using the USB. It appeared in Odin (I used v3.10.7). I flashed the firmware file downloaded (link in above para) and it roughly took 3 mins to show SUCCESS. Since, I selected the Auto Reboot in Odin, it tried to reboot but the device has been going through bootloop. At this point, I powered OFF the device and tried to boot into recovery. After couple of trials, it booted into recovery. I did a "wipe data - factory reset" an rebooted the device and it worked guys. I finally happy to see the device coming back to life.. however with the stock rom. However, I did not root the device as of this writing.
It worked finally. Hope this would help others.
uresh.kuruhuri said:
I am in a similar situation.
I have SM-T900 (Galaxy Tab PRO 12.2) and when I flashed TWRP 2.8.7.0 (for v2wifixx) for the first time over the stock recovery. It was successful and booted into recovery, but then it was not able to wipe any data. It gave some errors which I do not remember right now.
Then I tried re-flashing the same but it is not booting back into recovery, anymore after more than 5 attempts. When am re-flashing the TWRP, it is showing SUCCESS in Odin but the device is not booting into recovery. Current situation is that I cannot power it off nor boot into recovery. All it is allowing me is to get into download mode. Also, I have Kies 3/Smart Switch installed and NONE of them is recognizing the device in download mode either. However, am able to login to the download mode and reflash the twrp recovery image file.
Currently, opened the back cover and removed the battery connector and re-connected it and that is only way I could get the power off. I will try to re-flash TWRP again in the evening today.
I am posting here to ask for any other ideas. Is there anything else that I can try?
Thanks.
Click to expand...
Click to collapse
Hi I am in a similar situation. I flashed CM12 on my Tab pro 8.4 wifi. Left it untouched for a month or 2. That mean battery fully drained. Then I tried to charged but no luck. The tab only shows a hollow grey battery icon with a static circle in the middle. Cannot boot to recovery mode but only download mode. No charging at all.
I tried the button combo like holding down power + vol up 20s, etc. No luck. I then bought a battery and changed it....shxt, same!
Then I used KIES to flash stock rom. A bit better now I can see the samsung text but freezed there. Anyone can help?
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct
Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,
Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you very much for you help.
dr.rokr said:
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you
Click to expand...
Click to collapse
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tried the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
dr.rokr said:
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tryed the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
Click to expand...
Click to collapse
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
bruno2030 said:
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
Click to expand...
Click to collapse
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
go to the recovery.
connect to the PC.
open odin.
click on "reboot to bootloader"
It should go to to download mode.
what does your download mode screen say?
When I was doing this process I tried reflashing the latest rom but that didn't solve my boot loop issue.
So I flashed an older version of the rom.
Make sure the version you download is compatible with your phone.
You have G9650ZHU9FUG2 so only roms with 9 will work.
I flashed that old version and it didn't work, phone still stuck.
Then I flashed the latest one again and then my phone worked.
I used odin from the link you posted.
Odin3 v3.13.1
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
TormentedHeart said:
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
Click to expand...
Click to collapse
Hi! I have uninstalled everything and then install the drivers again without luck
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! Today I have successfully flashed the exact firmware that the phone had ( there is no newer) using a different laptop (it's true if the problem persist with Odin, use another laptop)
I got success message, at the very first time, and when the phone reboot, nothing , stuck as it was before, so I erased cache partition and no luck, still stuck on reboot, I have also tried repair apps , and reboot sistem now, what else should I do?
Thank you very much!
Hi! I want the community to know that using the APK adb app for Samsung it's a bad idea, after successfuly flashing the firmware and performing a factory reset several times the phone remain stucked, I downloaded about 10 different firmwares and flash them all times without an error, and the phone was bricked and stuck in boot. So I took it to the official service and nothing, still the same, then I found an external service that flash the device with a little box that they said they paid in advance for credits for using that box, it took them one full week to revive the phone, also they had to flash it several times. In conclusion, if you buy Samsung, stick with the garbage apps the throw, if you mess with the system in some way as the official technician said, the phone will be nearly unrecoverable for privacy benefits for the user. Thank you very much for the help to the community!