OK, I did search and found nothing. So, I need to ask this somewhere, hopefully this is the place. The similar threads search did not seem to help much.
I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode is it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process. I've yet (until now) had the privilege of having a wreck like this one.
So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen (EDIT: I left it there for an hour or so to see if boot would finish before disconnection). I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything. The power button starts up the phone in an initially normal manner, but it goes right to SAMSUNG in a black screen.
EDIT 2: I used the Cellular South firmware, saw nothing else US and thought I remembered reading this was what worked here.
There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.
Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
DUHAsianSKILLZ said:
Since you installed cm12 my guess is that its trying to switch back to davlik runtime. Have you tryed flashing twrp, then transfer another rom/custom rom too it and flash it with twrp?
Click to expand...
Click to collapse
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
SteveC485 said:
I did wonder about conflicts, including dalvik vs art. But I have a tab I can't do anything with except go to download. Since I tried stock firmware flashes, I imagine root is toast and so is flashing another TWRP, assuming I can do that with Odin. Never tried zip files with Odin. So short answer is no I have not tried flashing TWRP over Odin (which is now my only option). I also wondered if I was stuck with this paperweight until Samsung gets Lollipop to the Tab S, when I can get a stock 5.0 firmware from SamMobile, or someplace.
At any rate thank you.
Click to expand...
Click to collapse
What I mean is to flash twrp with odin then flash zips with twrp. If you cant reboot into recovery, if you installed adb then yoi can do adb reboot recovery.
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
senel said:
I`m having same issues. I was on stock rooted ROM and flashed latest TWRP from the app. Now I`m stuck in bootloop.
EDIT: flashed TWRP 2.8.1.0 via Odin and everything works fine now.
Click to expand...
Click to collapse
Thanks. When Christmas stuff winds down, I will give Odin a go. Thanks to both of you who answered. Merry Christmas.
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
SteveC485 said:
OK, Odin says the TWRP is successful, goes through all motions, up to and including PASS. The tablet still will only go into Download Mode. At this point I'm wondering about trying Kies. Also thought what might happen if I unchecked Auto reboot in Odin and tried that again.
Click to expand...
Click to collapse
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
DUHAsianSKILLZ said:
? You can boot into twrp? It should be power, home, vol up buttons. And to force reboot its power, home and vol up and down buttons at the same time.
Click to expand...
Click to collapse
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
SteveC485 said:
No, the power, home, volume up does nothing, I even held it there for maybe 15 minutes. The power, home, and volume up/down gets the download screen, or rather it gets the warning screen about the dangers of flashing a custom OS. Continue goes into download and reboot get me the same old attempt to reboot then stuck on Samsung screen. That last is the ONLY button combination I can get to work.
I'll let the thing use up the battery and shut itself off and try the manual reboot to recovery again. I've chased this thing around so much I'm likely in a boot loop myself and can't see my error.
Click to expand...
Click to collapse
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
DUHAsianSKILLZ said:
Hmm did you use the latest twrp? Ive alwayed use twrp 2.7. 1,1 Something. Never had problems in that version.
Click to expand...
Click to collapse
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
DUHAsianSKILLZ said:
nope. Odin only flashes tars and files with md5 or a few otheres. You flash zips with twrp.
Click to expand...
Click to collapse
Thanks, that's what I thought.
For whatever reason, this time the power, home, and volume up combination booted me into TWRP. Restored a backup and everything is up and running normally (at least so far).
I'm perfectly willing to admit error,but don't quite know where my error came in. I would swear I used the power, volume up, and home combination when I hit the download mode. But maybe not. I don't know why it worked now, except that I was inadvertently hitting the wrong combination, thinking I was doing it right. I remember thinking the first time it went to download mode, that I just did it wrong and used the wrong volume key. Thought I was more careful the succeeding tries.
At any rate thanks for the help. I will remember this particular lesson for a while .
hard brick
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
faztecnyk said:
My sm-t700 hard brick with the last twrp... I don't know if it is the twrp but it's hard brick when I do a restore with twrp...now it is just dead... no power.. no nothing lol... j'ai été le échanger. . Vive future shop.. mais la j'ai peur de recommencer mon root et etc...
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2838473
DUHAsianSKILLZ said:
Try this http://forum.xda-developers.com/showthread.php?t=2838473
Click to expand...
Click to collapse
Thanks.. but I said hard brick and not soft brick..
SteveC485 said:
Used 2.8.1.0. I had the issues trying to update to 2.8.3.0. I used 2.8.1.0 because it was working. I was thinking about trying the 2.8.3 because maybe I had a bad download and maybe a new flash might fix stuff.
Quick question, can Odin flash zip files? Never tried one.
Click to expand...
Click to collapse
A lot of Tab S owners have had issue with TWRP 2.8.3. There is another thread on it. I installed 2.8.3 with Odin and it was pretty wonky. Went right back to 2.8.1.
If none of the methods worked for anyone try this. If your tablet keeps trying to boot into twrp or stuck at the galaxy tab s screen try this if you cant boot into download mode.
Let completely die. Then put it in the charger and quickly press the combination of buttons to get into download mode. That should over ride booting into twrp. another way is to plug it into your computer and try different combinations of buttons.
I have the samsung galaxy tab s 8.4 and I rooted it a few days ago and I thought to myself lets install a custom recovery, but before I did that I backed up my stock kernal and my stock recovery through flashify, also im on stock firmware, after I backed those things up I installed twrp 2.8.3.0 and I booted into recovery to back up my rom and data just in case I soft bricked my tablet like I used to do on my nexus 7, when trying to boot into twrp it went in to boot loop I have tried all button combination I know and have seen in this thread but none works except for going into download mode. I dont know if I should flash an older version of twrp and see if it works or should I install stock firmware on my device and im not sure what version of odin I should use if I flash a older version of twrp. The version I used to root my tablet is 3.07 of odin.
Related
So my note 2 had been working very well, but just the other night it turned off and then was stuck at the Samsung logo screen. I attempted to boot into recovery, but it would freeze at the TWRP logo screen. I decided to Odin a new recovery and put the latest version of TWRP on there. I can now boot into recovery, but it asks for a password. I assumed I had just used a bad version, so I tried several others which resulted in the same outcome. Pressing cancel lets me get into TWRP, and it seems as though I can browse files, but trying to perform any other action gives an error message saying that TWRP cannot find the partition for data, system, and a few others.
Is the phone dead? Or is there something I can do to bring it back to life?
captterrible said:
So my note 2 had been working very well, but just the other night it turned off and then was stuck at the Samsung logo screen. I attempted to boot into recovery, but it would freeze at the TWRP logo screen. I decided to Odin a new recovery and put the latest version of TWRP on there. I can now boot into recovery, but it asks for a password. I assumed I had just used a bad version, so I tried several others which resulted in the same outcome. Pressing cancel lets me get into TWRP, and it seems as though I can browse files, but trying to perform any other action gives an error message saying that TWRP cannot find the partition for data, system, and a few others.
Is the phone dead? Or is there something I can do to bring it back to life?
Click to expand...
Click to collapse
Try to flash a stock rom with Odin.
If this does not work you are facing a compareable problem to mine http://forum.xda-developers.com/showthread.php?t=2440687 .
Maybe you find a way to get it work in this link.
Sounds like SDS
Luke44 said:
Try to flash a stock rom with Odin.
If this does not work you are facing a compareable problem to mine http://forum.xda-developers.com/showthread.php?t=2440687 .
Maybe you find a way to get it work in this link.
Click to expand...
Click to collapse
I just read through that thread, I'm not sure where I could find the correct pit mapping for this phone though =/
muppetmania said:
Sounds like SDS
Click to expand...
Click to collapse
I really hope it isn't SDS. I can odin a recovery onto the phone, but so far other odin-able images just fail. I'm downloading a pure factory image currently and will check to see how that works,
Hi Everyone,
I am a new owner of a soft-bricked SM-T700. I am feeling very down and need some advice. I will be as thorough as I possibly can and I would truly, truly appreciate some help and advice from you kind folks. This is the first time I have had a bricked device out of my many Android devices.
My PLAN:
-Root
-Custom Recovery
-Nandroid Backup
-Backup EFS
-Flash stock western country firmware
What HAPPENED
Today I bought a wifi T700. I bought it in my hometown, which is China. Whenever I buy a new Android device in China my first action is to ensure it doesn't have any hardware/warranty issues. I then go about reflashing a western firmware so I can use Google services.
1) First I rooted using CF-Auto Root. That worked fine. I confirmed that I had root using an app called root checker.
2) I then attempted to flash TWRP recovery by following the instructions here: http://teamw.in/project/twrp2/238
- First I tried flashing the .tar file using Odin. As soon as I hit 'Start' Odin froze and I got the Windows error saying "Odin Downloader Has Stopped Working", asking to close the program. I close the program. I tried this several times then rebooted. It seemed as though the phone booted fine.
- I then tried using their own software, TWRP manager, here: http://jmzsoftware.com/twrp-manager-4. This app just crashed every time I booted it. I submitted an error log.
- I then tried using 'Flashify' as suggested by someone here on XDA. Once I did that it said flashed successfully and would I like to reboot. I said yes. This is when my troubles started.
3) Upon reboot it immediately booted into a sparse looking 'Download Mode' screen, all in English (the normal one on mine has some Chinese too) without the volume button options to reboot or continue. It just went straight into this screen.
After trying to reboot the phone using several power button holds and key combinations, it appears I am stuck in this screen, so I thought I had no chance of doing a NADROID backup as originally planned, so I decided to try my luck and flash the western firmware.
I tried to flash the version of the firmware provided here: http://forum.xda-developers.com/showthread.php?t=2798835
http://www.androidfilehost.com/?fid=23501681358556680
It got all the way through the install until it hit the hidden.img and then failed. I've attached a screen capture.
A few notes;
I have tried using two different USB cables (the one that came with it, and the one that came with my HTC One). I have tried several USB plugs, including the one in the back of my PC. I allowed Odin to do it's MD5 check and it said the file checks out.
I have tried using the Kies emergency Firmware recovery. Pffft! As it that was going to work. Damn Kies.
I sound like I've still got my sense of humor, but actually I am really cut up about this. It is so much money for a tablet and now it is useless unless I can get s firmware that will flash.
I don't have my stock Chinese firmware. That is T700ZCU1ANF4/T700CHN1ANF4/T700ZCU1ANF4/T700ZCU1ANF4 (CHN).
Questions:
Does anyone know where I could find the stock Chinese firmware to try flashing back to that?
Does anyone have the .PIT file and instructions on how to flash that, because I have read in other threads that it solves the hidden.img problem.
Does anyone know why this may have happened and have any alternative suggestions?
Could it have been the TWRP that actually caused this? The thread here indicates others aren't having trouble. Why would it have frozen for me?
I will try anything at this point. I am desperate.
Thanks so much in advance. Please come through XDA! Please come through Galaxy Tab S owners!!!!!!
-------------------------------------------
CLOSURE EDIT: I managed to flash Australian firmware, after reinstalling Kies, uninstalling and reinstalled the device drivers. I also made sure all Kies processes were killed before flashing with Odin.
For people in a similar situation I would urge them to have patience and keep trying to flash stock firmware.
Private Message UpInTheAir and see what he thinks.
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
The program crashing is when you should back off from trying to flash. Reassess what you did and what happened and if it's failing at a point flash the stock back before rebooting.
Continuing blindly was the problem. On something as expensive as a tablet never continue past a point where something goes wrong without reflashing back to stock and starting again.
As eousphoros said Use heimdall and flash a recovery.
Good luck.
eousphoros said:
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
Click to expand...
Click to collapse
Hi All,
Thanks for taking the time to reply.
You are certainly right that it is my fault and I should have stopped at some point and reassessed what was happening.
Can you please give me some more information about the steps you have offered? I am researching heimdall now, but if you could give some steps or advice that would be much appreciated.
It's probably going to be difficult because I assume we are in different timezones. I will persevere and try to get this worked out.
I have downloaded Heimdall and understand that it is an alternative to using Odin.
I currently have three questions about Heimdall.
1. Do I need to do the install drivers step if I have already installed the drivers for my device? Is this some step that actually replaces the current drivers with ones that are required for Heimdall to operate? I ask them because when I list USB devices, my tab is not shown up as Samsung Composite Device. It is actually shown as two separate entries, looking like generic USB entries.
2. Do I need to have a valid PIT file in order to run a custom Heimdall flash?
3. Which partition should I select if/when I run the Heimdall flash?
I'm dying a little inside every time I look at my tablet
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
eousphoros said:
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
Click to expand...
Click to collapse
First of all, let me just say that OH MY F#@$ING GOD I THINK THE NIGHTMARE IS OVER!!!! I managed to flash the Australian Firmware successfully. It has now booted fine, I have factory reset and I am in the process of setting up the device afresh.
Having said that, when I do come to reroot and install a custom recovery, I will definitely take a look at yours. Was this here 12 hours ago? I looked and couldn't find anything about CWM except for a short thread and an unofficial port. I have never tried TWRP before and I will avoid it like the plague in the future. I have NEVER had trouble with CWM.
When (if ever) I get the nerve up to give this another go, I will try your CWM.
Thanks again.
I am so relieved right now.....
And make a Nandroid first this time
Hey,
I had the exact same issue with my Galaxy Note 8, every time I tried to install European or custom Rom.
The only way to get the tab back was to flash with the Chinese firmware. You may find it easily on Baidu.
Since it happened also with a note 2 and note 3, I stopped buying Android device in China... Unless you can make sure that you buy a model coming from HK.
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
ky3bmu4 said:
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
Click to expand...
Click to collapse
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
ky3bmu4 said:
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
Click to expand...
Click to collapse
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
pierrotee said:
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
Click to expand...
Click to collapse
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
ky3bmu4 said:
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
Click to expand...
Click to collapse
Cool! So do you now have root and custom recovery?
pierrotee said:
Cool! So do you now have root and custom recovery?
Click to expand...
Click to collapse
Yeah))
TWRP installs OK via TWRP Manager
I installed TWRP Manager, selected 'klimtwifi' as the device, and it successfully installed TWRP 2.7.1.1 without a hitch.
From TWRP I then immediately performed a nandroid backup of everything but the caches to my microSD card and encountered no problems.
The last step was to enable writing to my microSD card by installing NextApp SDFix.
My SM-T700 is bricked as well and I tried to flash a custom recovery with Heimdall on Mac but it gave me the Error "Claiming Interface failed". Seems like you really need the pit.
Hi Guys,
After playing with a lot of different roms on this tablet, i was content with CM12. I thought also now would be a good time to update TWRP from the ROM itself. So, i downloaded the TWRP manager, told it my device and told it to update. It asked me if the location for recovery was ok, and i (assumed....so its me being stupid) told it it was.......
Now my tablet wont boot anymore, i only get to see the "downloading" screen with the android dude. I love the android dude, but not so much that he's all i want to see
I tried using odin to re-apply the TWRP file from there, but it just is stuck at "initialization". I tried doing the same with the stock firmware from Sammobile, but the same thing happens.
I know there HAS to be a way to get it working again as it is still powering on...but i am running out of ideas. Can anyone please help me? If you're in town i will treat you to a nice Jopen bier
Thanks guys,
Yves
yvessparks said:
Hi Guys,
After playing with a lot of different roms on this tablet, i was content with CM12. I thought also now would be a good time to update TWRP from the ROM itself. So, i downloaded the TWRP manager, told it my device and told it to update. It asked me if the location for recovery was ok, and i (assumed....so its me being stupid) told it it was.......
Now my tablet wont boot anymore, i only get to see the "downloading" screen with the android dude. I love the android dude, but not so much that he's all i want to see
I tried using odin to re-apply the TWRP file from there, but it just is stuck at "initialization". I tried doing the same with the stock firmware from Sammobile, but the same thing happens.
I know there HAS to be a way to get it working again as it is still powering on...but i am running out of ideas. Can anyone please help me? If you're in town i will treat you to a nice Jopen bier
Thanks guys,
Yves
Click to expand...
Click to collapse
What Device you have? When you flash TWRP with Odin, do you uncheck Auto Reboot? I always uncheck it then power off then press Power, Home and Vol up to boot TWRP. Maybe no help.
Rooted i747 said:
What Device you have? When you flash TWRP with Odin, do you uncheck Auto Reboot? I always uncheck it then power off then press Power, Home and Vol up to boot TWRP. Maybe no help.
Click to expand...
Click to collapse
Sorry, Samsung galaxy tab pro 10.1, sm-t520 aka picassowifi.
Auto reboot does not change anything... Still stops at 'initialization'.
I cannot get anywhere else but the downloading screen...
Thanks so far
I know you can't take the battery out but I been reading to let it die. Then plug it in works for some.
Note 4 Port Evolution 3.0
I drained it...when I get home I will try the Odin method. I'm starting to worry though....
Thanks again
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
yvessparks said:
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
Click to expand...
Click to collapse
Glad it's working! :good:
How to drain battery?
Good to hear it worked for you but how did you drained the battery. I dont know how to drain it if I cant use the tablet ( and I believe my tablet is fully charged)
I am in a similar situation.
I have SM-T900 (Galaxy Tab PRO 12.2) and when I flashed TWRP 2.8.7.0 (for v2wifixx) for the first time over the stock recovery. It was successful and booted into recovery, but then it was not able to wipe any data. It gave some errors which I do not remember right now.
Then I tried re-flashing the same but it is not booting back into recovery, anymore after more than 5 attempts. When am re-flashing the TWRP, it is showing SUCCESS in Odin but the device is not booting into recovery. Current situation is that I cannot power it off nor boot into recovery. All it is allowing me is to get into download mode. Also, I have Kies 3/Smart Switch installed and NONE of them is recognizing the device in download mode either. However, am able to login to the download mode and reflash the twrp recovery image file.
Currently, opened the back cover and removed the battery connector and re-connected it and that is only way I could get the power off. I will try to re-flash TWRP again in the evening today.
I am posting here to ask for any other ideas. Is there anything else that I can try?
Thanks.
yvessparks said:
Thanks for your help guys! The battery drain did the trick! I successfully installed the new TWRP and new CM 12.1
Thanks guys!
Yves
Click to expand...
Click to collapse
Finally fixed the issue.
I downloaded the firmware from www.sammobile.com for SM-T900 (Cellular South) having the PDA version as T900UEUBOI2 and this is for US. I downloaded the latest (v5.1.1) as of this writing.
I switched ON the tab in download mode and connected to computer using the USB. It appeared in Odin (I used v3.10.7). I flashed the firmware file downloaded (link in above para) and it roughly took 3 mins to show SUCCESS. Since, I selected the Auto Reboot in Odin, it tried to reboot but the device has been going through bootloop. At this point, I powered OFF the device and tried to boot into recovery. After couple of trials, it booted into recovery. I did a "wipe data - factory reset" an rebooted the device and it worked guys. I finally happy to see the device coming back to life.. however with the stock rom. However, I did not root the device as of this writing.
It worked finally. Hope this would help others.
uresh.kuruhuri said:
I am in a similar situation.
I have SM-T900 (Galaxy Tab PRO 12.2) and when I flashed TWRP 2.8.7.0 (for v2wifixx) for the first time over the stock recovery. It was successful and booted into recovery, but then it was not able to wipe any data. It gave some errors which I do not remember right now.
Then I tried re-flashing the same but it is not booting back into recovery, anymore after more than 5 attempts. When am re-flashing the TWRP, it is showing SUCCESS in Odin but the device is not booting into recovery. Current situation is that I cannot power it off nor boot into recovery. All it is allowing me is to get into download mode. Also, I have Kies 3/Smart Switch installed and NONE of them is recognizing the device in download mode either. However, am able to login to the download mode and reflash the twrp recovery image file.
Currently, opened the back cover and removed the battery connector and re-connected it and that is only way I could get the power off. I will try to re-flash TWRP again in the evening today.
I am posting here to ask for any other ideas. Is there anything else that I can try?
Thanks.
Click to expand...
Click to collapse
Hi I am in a similar situation. I flashed CM12 on my Tab pro 8.4 wifi. Left it untouched for a month or 2. That mean battery fully drained. Then I tried to charged but no luck. The tab only shows a hollow grey battery icon with a static circle in the middle. Cannot boot to recovery mode but only download mode. No charging at all.
I tried the button combo like holding down power + vol up 20s, etc. No luck. I then bought a battery and changed it....shxt, same!
Then I used KIES to flash stock rom. A bit better now I can see the samsung text but freezed there. Anyone can help?
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct
Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,
Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
Hello, I have this SM-T520 galaxy tab pro 10.1 that I bought new some years ago. I had rooted it and ran with it for a while until I wanted to flash a custom rom. I can't remember how that went but I assume it went badly, since it hasn't been able to boot into anything for years. It tries to boot up as long as it has power (even without pressing the power button) but it doesn't do anything after you get to the Samsung screen. It just stays on a back lit black screen. I can get into the Android system recovery by pressing power and volume up, then releasing power. It says it has "K0T49H.T520XXUANAE" at the top but I'm not sure if I had changed that at some point. Anyway, even after wiping data/factory reset and wiping cache partition it still cannot boot. I tried updating from external storage a few times before but it kept failing. Maybe I had the wrong file? What can I do to fix this thing? Any help is appreciated.
Go to pc, download odin. Go to https://www.sammobile.com/firmwares/ enter device and look and download lastest offered firmware for your region. Flash downloaded firmware with odin. You should be on a booting stock rom now.
You can do this as often as you like (eg. when device is bad after playing with custom roms).
hamudistan said:
Go to pc, download odin. Go to [website] enter device and look and download lastest offered firmware for your region. Flash downloaded firmware with odin. You should be on a booting stock rom now.
You can do this as often as you like (eg. when device is bad after playing with custom roms).
Click to expand...
Click to collapse
That worked perfectly... I feel like that was too simple and I should have been able to find this online somewhere. Maybe I just couldn't find the right word combo in google.... Thanks!!
Now to try flashing a custom rom on this, since touchwiz makes me cringe.