Develop Bugs

DIY Samsung Captivate Dock

I have a Samsung Captivate and was unable to find the dock sold in Canada at stores or online, so I decided to create a dock of my own.
All I used was a black sketching board (not bristol), black electrical tape and a few other items used to create the dock (scissors, ruler, pencil), also added two batteries for weight but anything else could work.
The dock in my opinion looks very good, I was aiming for a minimalistic look while making it sturdy as well. This dock is also very versatile, it can work in both landscape and portrait mode.
Overall time to make this was two hours *due to figuring out measurements and putting it precisely together*, but it was worth it. I saved myself several dollars which is always a plus.
If you are interested or have any questions about this, just ask!
I have uploaded a few pictures of process and final. (I wasn't able to upload each step by step process due to the picture limit of my account)
Cheers!

Nice!
deadly0ne said:
I have a Samsung Captivate and was unable to find the dock sold in Canada at stores or online, so I decided to create a dock of my own.
All I used was a black sketching board (not bristol), black electrical tape and a few other items used to create the dock (scissors, ruler, pencil), also added two batteries for weight but anything else could work.
The dock in my opinion looks very good, I was aiming for a minimalistic look while making it sturdy as well. This dock is also very versatile, it can work in both landscape and portrait mode.
Overall time to make this was two hours *due to figuring out measurements and putting it precisely together*, but it was worth it. I saved myself several dollars which is always a plus.
If you are interested or have any questions about this, just ask!
I have uploaded a few pictures of process and final. (I wasn't able to upload each step by step process due to the picture limit of my account)
Cheers!
Click to expand...
Click to collapse
THATS AWESOME! looks great i have got to try this. unfortunately i have the creativity of a dead leaf

That's pretty awesome. I was thinking of doing something similar with fiber glass shortly. Lol
Sent from my SAMSUNG-SGH-I897 using XDA App

Problem is.... and I'm NOT trying to be critical here, please understand that from the get go.... that ISN'T a dock, it is a stand! A dock also incorporates the charger so you "dock" the phone into the charging port so it automatically connects the cable. What you have, and it is very nice looking, no doubt about it, is a stand with a cable behind it, same as what I've done and most of us have done.
I've rigged a car charging DOCK up once, but the thing is SO fussy, if you are off by a fraction of a millimeter or don't push the phone all the way in with the strength of the Hulk it sometimes seems, then it won't charge the phone, and all those hours spent making something custom are wasted....
Looks good, again! Now make it charge the phone just by dropping it in!

Heya
This looks really nice, is there any way you could make a youtube video or something with the process? im definetly interested. The only image i saw with dimensions isnt enough :S.
Supaphreek

Easecase E5 review

Just a very quick review of my Easecase E5 which arrived about a week ago.
You can see pictures of it by search eBay for "Easecase E5 galaxy note" (without quotes), there's one here : http://www.ebay.co.uk/itm/E5-EASECA..._MobilePhonesCasesPouches&hash=item5ae4059699
(I did get a bit of a shock when I saw that - that is my actual one - with my name on it, I was just searching for one at random)
Delivery time:
As mentioned in other parts of this forum, delivery times for Easecase are pretty woeful. I ordered on the 25th of November and, it arrived here a few days over a month later in Sweden. The problem seems to be largely that they ship via China Post which is quit slow - they dispatched it (with trackable* shipping) within about a week. I bought it through eBay, so I am not sure if they have another outlet, and, they make it very clear on their eBay items that they will take a looong time to ship, so, I can't take any points off them there.
Build quality:
It is beautifully put together. There's a slot running down the inner spine for the stylus, and my name is embossed on the front. I would characterise it as high quality.
Outside:
I opted for the magnetic clasp. It isn't a very strong magnet, but does the job.
Apart from the clasp, there's just the embossing on the outside, and, a neat seam around the edge.
Inside:
There are 2 bill pockets inside, both of which are *very* deep. They're about as deep as the note is high.
When it is fully opened, there are 5 credit card pockets on the left. Note that these seem to be individual pockets, separated from each other internally. Cards fit vertically into these pockets. The front of the pockets stretches a bit over 2 thirds of the way from the far left of the case to the spine. Behind the pockets is a sleeve about 1/3 wider than the short side of a credit card where you could fold bank notes* (remember this, I'll come back to it.
As I said, along the inner spine is slot for the stylus.
On the right is where the not goes. It slots in (quite snugly) from the top. The top is open, so you can get to the headphone port. There's a hole in the left for the volume control, a hole in the right for the power button, and, a hole in the bottom for access to the USB port.
Looking at the front, the home and hardware buttons are all accessible as part of the screen area. They've also neatly cut out around the top speaker and, the front camera.
Protection:
Very good. If the magnetic clasp doesn't come undone during a fall, then, it'd be very hard to break the screen. It is nice thick leather, and you might even be able to drop a brick on it when closed without breaking the screen.
It still won't help you if you drop it in the toilet as some poor chap here has apparently done.
Usage:
It is very bulky. Like one of those filofax jobs people used to (still?) have.
I'm used to big gadgets, so I cope, but you wouldn't get it into tight jeans pockets. I do squeeze it, with some discomfort into my front trousers pocket.
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
Using the rear camera requires removing from the cover.
General browsing/emailing etc is fine with the cover on.
Fortunately removing the phone is a fairly quick procedure, as is putting it back it. I imagine it'll get easier still as the leather stretches a touch.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Summary/thoughts:
I wish I'd bought the one without the bank note pockets. That'd reduce the bulk considerably and you could still stick notes behind your cards (see * above). You can also use the rear facing camera with the non-bank note version (E4).
On balance, I am pleased I bought it though, it is of high quality and, it is great having your phone and wallet all in the one thing - it also means you can ring your wallet to find it when you are in a hurry to head to work
If anyone has any questions, I'd be happy to answer them.
My recommendation for anyone thinking of getting one of these is to get the E4 and not this.
They don't seem to have any E4's on eBay at the moment for the note, but I am sure I have seen one there. Here's one for the Desire HD - I am sure it gets the point across.
http://www.ebay.co.uk/itm/E4-EASECA...sesPouches&hash=item5647be7cbf#ht_5657wt_1016
Cheers,
Kent

kentmartin said:
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Click to expand...
Click to collapse
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
- Frank

ChodTheWacko said:
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
Click to expand...
Click to collapse
No, the banknotes pockets kind of open so it gets more bulky and wants to spring back to about 180 degrees (where 0 is closed, 180 is wide open and 360 is the position you suggest), but I suspect you could with the E4 model.
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
Click to expand...
Click to collapse
Yes - I read about that setting a while back, but have never used it, thanks for reminding me - it is now enabled for the swipe down gesture (hide dock was annoying me anyway).

Hi, thanks for the review, i've been stuck deciding between the E5 and the E4, due to the E5 having the bill slot, which i would think is really good compared to folding the bills under the cards.
Can you take a picture of the case when it's fully loaded, both open and closed?
e.g. all card slots used, and the bills folded and slotted under the cards
That would probably help sway my decision, if that slot + cards do not bulk up the entire wallet.

More info // pics in my thread. http://forum.xda-developers.com/showthread.php?t=1419678

I love those case, but it's sucks when they cost so much!
It's should be 10$ max.

peanuts and monkeys
i hope to order this case by the end of this month, i've emailed them some questions on customisation, hopefully it's permitted, then can go forward with this.

the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.

EvoFighter said:
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
Click to expand...
Click to collapse
Ya know I thought the same thing at first, but I just got a pack of 3 extra batteries and I find I can put two of em in the wallet and also a cleaning cloth and everything fits great.

In terms of customizations I wonder if a small bit for some change could be added.

Its beautiful.

Easecase E5 looks good.

This is a genuine leather case, and very good quality construction. They also responded well to my customization request (I wanted a 65mm horizontal belt loop added to mine).
Only $10 max is out of the question. Worth 3 to 4 times that much. It includes branding of your own name as well. It's a very classy leather case/wallet.

Could you please share a photo were the Note is next to the case just to compare the size of the case?

Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?

dreamstealer2045 said:
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
Click to expand...
Click to collapse
When I dealt with them, I found them quite responsive, I suggest asking them if it'll fit the i717 - odds on if it doesn't they'll have one that does even if they haven't advertised it yet.
Although I haven't seen it, I'd definitely recommend the E4 over the E5 - I find I don't really need the slots for notes (you can slip folded notes in the bit behind where credit cards go anyway) and, it the banknote pockets block the camera (by necessity) which drives me a bit mad.

[Q] Magnetic fridge mount?

I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!

Super Sam Galaxy said:
I'm getting a free Galaxy Tab 3 as a promotion from Time Warner Cable (which I assume is the 7" version based on the statement on their website that says "$199 value") and thought it would be kind of cool to use it for recipes. The idea is that I would use Pepperplate, and use Smart App Protector to keep the screen on while Pepperplate is open. The part I haven't decide on is where to put it. At this point, the most practical thing seems to be to get a case that has strong magnets fastened to the back, which could remain on the tablet at all times, and when I want to use it to cook with I could just slap it on the fridge. But I haven't been able to find any cases that seem to fit this need. Does anyone have any suggestions for this? Or suggestions for a case that may be ideal to Gorilla Glue some neodymium magnets too?
The under-the-counter mounts don't seem to be a good solution because I would like this to be portable when it needs to be. Also, I'd love to hear if anyone has any suggestions on how to implement some method of charging while it's on the fridge, though this is not too important to me and is more of a curiosity than anything else. I was thinking perhaps if the tablet is capable of wireless charging, having magnets around the edge and a wireless charging base on the fridge that would go in the center, then trying to find a way to run the cord along the edge of the fridge door. And if it has NFC (which unfortunately it looks like it may not) perhaps I could have a tag on the fridge that would trigger Pepperplate to launch.
This is all just for fun, but it would be really neat to have some sort of set up where I could just slap the tablet on the fridge and have it do its thing. The biggest priority is finding a case that would be magnetic or easily modified to be magnetic. Any input is welcome. Thanks!
Click to expand...
Click to collapse
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!

jimmbomb said:
here's how I would do it...
Get yourself a (or 2) cheap TPU cases. I have one called BoxWave. 5-6 bucks.... Ebay or Amazon
A semi flexible stiff rubber (TPU) case that the Tab gets fitted into..just like the supersoft silicone cases, but the TPU material is alot stiffer, but still flexible enough to get it on and off your tab easily..
then get peel and stick magnet strips for any hardware store..Home Depot, Lowes, Walmart, True Value, Ace... wherever
Stick the magnets to the TPU case and let them set up for 24 hours before putting the Tab in it and putting weight on it..
if youre scared..
Gorrilia glue will work too.. remember.. it's just a cheap case and worth the sacrifice..
Then there ya go!! slip the Tab into the case and stick the Tab on the Fridge!!!
Good luck and be sure to post Pictures of your success!!
Click to expand...
Click to collapse
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse

jimmbomb said:
Super Sam Galaxy said:
That sounds like a fantastic way to do it. I was very uneasy about magnets because of two things: the first is that I was afraid they would separate and the other is that I thought I'd need magnets so strong they may damage the tablet. Gorilla gluing them to a case is perfect because it's strong, doesn't damage the tablet, and doesn't require ridiculously strong magnets like I'd need if I had something like a metal plate inside the tablet that the magnets would need to stick to. I wish I'd seen this post a few days ago, because as it turns out I have already started another plan, which I've already ordered the parts for, but I'm strongly considering cancelling my order to give your method a try. The one thing that makes me hesitate is that with the new plan, I've come up with a way to hide the cord, whereas I was unable to think of a way to do this when it's on the fridge.
Here's what I put together: I have a cabinet directly on the left of my stove (as opposed to the fridge which is directly to the right of it). The cabinet starts about a foot and a half off the ground and comes up to about my neck. The idea is to mount it on the cabinet door and hide the cord in the cabinet, and the specifics are as follows. There's no power source inside the cabinet, so I was going to drill an extension cord sized hole in the back base of the cabinet to slip an extension cord into. Then I'd drill another (smaller) hole in the door for the micro USB end of the charging cable. Next, I'd put the power cable together, and it consists of 3 parts. The extension cord, a USB-to-power adapter, and a micro USB to USB flat cable that I've orderd. I ordered a flat one so it can go behind the tablet without being very visible. So once I have cleared a path for the cord and put it together, I'll run the cord from the wall to the hole in the door, and staple it along the edges everywhere in between so it's not in the way. Finally, I'll mount a TPU case on the top part of the door by drilling holes and screwing it in, securing it with hex fasteners on the other side of the door. I've included a simple MS Paint rough draft of what the finished product will look like.
The idea is that it will be mounted on the door, the cords won't be visible, and it will always be connected to a power source (unless I remove it temporarily). I'm not too worried about frying the battery since there are not many instances that would require me to remove it from power so as to rely on the battery. I hate to be so OCD but visible cords are a bit of a bother to me. However, if you have any ideas as to how I may hide them with the method you mentioned I'd be happy to hear them since your method sounds far easier and less destructive, and probably an all around better option if it weren't for those pesky cords! Also, since my tablet hasn't arrived yet I can't check this for myself: (if you have the same tablet) does the Galaxy Tab 3 7.0 have NFC capabilities? I couldn't find anything saying it did, but I couldn't find anything saying it didn't either. If so, I'd put an NFC sticker on the inside of the case and create a set of tasks in Tasker so that when I put it in its home it goes into "Kitchen Mode". Anyway, thanks for all your help and suggestions, and whatever I end up doing I will definitely post a few pics to show it off!
Yes.. I can see that fastening a tpu case to the cabinet door would work out good... and hiding your cord is a neet way too... too bad that your cabinet door will have to have a huge hole it it behind the Tab...
Maybe mount the TPU closer to the edge and run the Micro USB out of the tab, and a U-turn BEHIND the cabinet door instead of thru it.. your tab will be off center from the cabinet door... but and now remember... it's stuck there. when you pull your tab out.. you'll have an empty TPU case with 4 screws hanging on your cabinet door.
Ive seen stick on magnet strips here about 1"X4".. peel and stick.... I think 4 of those on a TPU case... perfect.. cause you can snatch it off the fridge anytime. carry it away.. stick it to the stove hood..... anywhere.... screwing to a door is semi permanant.. .. Ill go so far as to suggest 2 TPU's... one magnets on the back.. and 1 screwed to the cabinet door.
Subscribe to this thread and it will notify you of replies immediately....
good luck.. keep the ideas comming...
by the way... I thought we were talking about the 8 inch tab3 not the 7,,,,, my bad... I have an 8 incher
Click to expand...
Click to collapse
I do like the fact that your way doesn't involve destroying parts of my kitchen! I'm thinking now that if I find a way to fasten the USB cable to the fridge in a semi-permanent manner it may not be so bad... The cord is white, like the fridge, and with it being flat it may be less noticeable. I wonder how it would hold up with the door being open and closed, as in whether or not it would slide/fall from the repeated movement... This is going to be a tougher decision than I initially thought! At least there's time to figure it out, the tablet won't be here for like 2 months.
Click to expand...
Click to collapse

ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck

jimmbomb said:
ill get me some stick on magnets soon and stick them to my TPU and test it out.
Ill post the results..
How come yours wont come in for 2 months? and are you getting the 7" or the 8"
Ive seen the tab3 -7"incher at Best Buy last weekend for only 49$$ but they want you to contract up on a data plan..
WEAK!!!!... I pull my ATT go phone sim out of my phone and jam it into my 315 and BAM!!! an 8" Galaxy phone with data, mms, and voice calls!!!
good luck
Click to expand...
Click to collapse
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
UPDATE: Just got off the phone with TWC after an hour and 36 minutes, and they told me that they are going to "pass my details to the correct department" and I'd get a call within "3-4 days". Funny, as I pointed out, that was the same thing they told me 8 days ago, after another equally long phone conversation. Anyway, to sum it up they are giving me a credit equal in value to the tablet and I'm debating between the Galaxy Tab 3 (7 inch), which was what the promotion originally offered, or the 2013 Nexus 7. The Nexus has gotten great reviews, is there anything about the Galaxy Tab that you'd recommend over the Nexus? I know I'm kind of getting off track here but I'm just curious.

Super Sam Galaxy said:
Please do post results! Sorry I didn't see the reply again, I did subscribe to the thread but I must have missed the email... now it's been a while! Anyway, the 2 month period is just one of the hoops TWC makes you go through to get something free. It will be the 7 inch tablet. I am actually on the phone with them now trying to get them to honor their agreement and it's like pulling teeth. But they are either going to give me a tablet or I'm not going to pay my bill for the next 3 months to make up the difference and I'll buy my own damn tablet! Anyway, I intend to post photos when it's done. I've got everything set up, I just need a table to go in the TPU case.
Click to expand...
Click to collapse
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??

jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Perhaps upload to Youtube and send a link? Anyway, don't worry about it if it's a bother, but if you get a chance I'd be interested to see. I'll try to keep up with the thread better!

jimmbomb said:
well... after you vacated the thread, I figured you lost interest or just decided to drill holes in your cabinet door..
So, I didnt get any magnets.. BUT I will get them this weekend.. maybe tomorrow... Id like to shoot a video of it stuck to the fridge while opening anf closing... how to post it though??
Click to expand...
Click to collapse
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.

Super Sam Galaxy said:
Also, here's a photo of the finished product (pending insertion of tablet). Let me know what you think.
Click to expand...
Click to collapse
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work

jimmbomb said:
well that looks pretty cool, now that sits right in the middle of your cabinet door? How did you mount the case to the door, I don't see any screws on the backside of the case that went through the cabinet door with I'm guessing nuts on the other side..I will look for the magnets today at to hardware stores on the way home from work
Click to expand...
Click to collapse
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!

Super Sam Galaxy said:
Thanks! It's actually a flip-cover case, so the screws are in the cover part, which is flipped over behind it. then I drilled a small hole for the micro USB cable and ran that along the edge of the inside of the cabinet. Now that I'm debating getting a Nexus 7 instead (TWC just gave me a credit to my account in the amount of the tablet, so I have up to $200 to go toward any tablet I want at this point) I'm considering using a wireless charging pad so all I have to do is place the tablet in the case, though not sure if that would work through a case. Still playing with ideas, and if I do the Nexus 7 then I'll need a new case, but thankfully, they're cheap!
Click to expand...
Click to collapse
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!

jimmbomb said:
Ok... lets try this...
https://www.youtube.com/watch?v=5jD25aOvicI&feature=youtube_gdata_player
Now, my fridge finish is textured and not smooth. Kind of like a course orange peel,
So I think the grip was not as strong as if it were a smooth surface. If I were to keep this, I would go with a 1 inch wide magnet instead of a half inch which was $1.59 for 30 inches X 1/2".
Good luck!
Click to expand...
Click to collapse
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.

Super Sam Galaxy said:
Looks great! When you say the grip isn't as strong, I'm wondering, did it slide at all when you opened and shut the door? I didn't see any movement the first time you shut the fridge door and it didn't seem to be in a noticeably different location so I couldn't tell if it did, but that's my primary concern with the magnet method, so if it stays in place then that looks like a perfect solution.
On another topic, what app are you using for the dialer? As I understand it (correct me if I'm wrong), the tablet itself does not come with a dialer, and that was something I was planning on looking into down the road - particularly one that can be used with Google Voice. So my questions are 1) what is the name of the app and 2) does it allow Google Voice capabilities? I know that Google Voice is going to disable third party apps that use its service in a few months, but in the mean time it would be cool to use it to make calls.
Anyway, thanks for taking the time to make the video, and I really like how you have it set up.
Click to expand...
Click to collapse
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..

jimmbomb said:
Like I said that my fridge has a textured finish, so the mags were not getting a solid grip.
It DID stay up there. I even shut the fridge door hard once to test it, but, I'm suspicious, so IF,
IF, I were to do this set up on MY fridge, I would double up on the mag area. & yes, It did NOT move when I had it, just that I wouldnt do it full time without doubling up on the mag area..
My SM-T315 8" Tab came with the Samsung dialer installed.. ya see... It's actually an 8 inch galaxy phone.
Does everything the phones do just in a larger screen.
It has a sim card slot... I take the sim out of my smaller phone (ATT) and slide the sim into the tab 3 8" and BAM!!! The tab is now my phone...
Phone , data plan, mms, everything now comes to the tab with my same number. No need for google voice.
it cost a bit more than the wifi only ones sold at the brick and mortars here in the USA, but, I like the phone and mms features.
good luck
Good luck..
Click to expand...
Click to collapse
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?

Super Sam Galaxy said:
That's nice that it works as a phone out of the box. I use Google Voice as my primary number, which is a pain sometimes, but I like the fact that I can answer it from my mobile, my home phone and my computer, and when I call out from any of those it also shows the Google Voice number on caller ID to the person I'm calling (for the home phone, this is through Ooma Telo). Wish I could have the tablet work the same way in case it's closer when the phone rings. Did you have to order that through a special online service, or can you find that version on Amazon?
Click to expand...
Click to collapse
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.

jimmbomb said:
Maybe not Amazon.. I know they had the 311 which is the same but NON-LTE.... E bay has a bunch..
I got mine and all my international stuff from Negri Electronics. They operate in Las Vegas. Very good store and after the sale customer relations.
good luck deciding now.
Click to expand...
Click to collapse
Thanks!

The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app

Latheman said:
The nexus is a newer version of android but the galaxy has a SD card slot. A big plus in my mind.
Sent from my SM-T210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I agree that removable storage is nice, but I wouldn't say it's a deal breaker for me because of the fact that I can get something like a Meenova to easily add more storage if I need to. At this point I'm leaning toward the Nexus because for this purpose, wireless charging capability seems more beneficial than removable storage simply due to the fact that it would be cool to not have a cord showing when it's mounted, and to not have to plug it/unplug it every time I want to take it down for a bit. Of course, the flip side is that instead of seeing a cord, I'd see the Meenova sticking out of it, but that doesn't seem as bad since I probably wouldn't need to have one in there all the time. Either way, I do appreciate the suggestion and I will certainly take into account the capability for removable storage when making my choice. Thanks!

For those curious about that plastic insert on metal banded 360s...

When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.

charesa39 said:
When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.
Click to expand...
Click to collapse
Wow... Just wow is all I have to say.
Premium materials. Hyped for ever.
Think I'm just gonna stick with my leather for now and remember this going forward.

charesa39 said:
When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.
Click to expand...
Click to collapse
Mine just snapped, same thing. No way in * am i going to send this back and wait four months for a replacement that will most likely have dead pixels or other issues after the h**l ive been through getting this one shipped to me from them the first time and all the cracked backs for other people with OEM bands that are leather. If they refuse to send me replacement plastic links at no cost free expedited shipping I'm going to file every consumer fraud report on them that exists after the bs they are putting me and others through with the nexus 6.

The content should speak for itself
Ryan: Hi, my name is Ryan. How may I help you?
Gary: Hi My name is Gary, My email is ************@gmail.com, I just spoke to a representative Eddie over at moto maker online chat support, reference number 141129-015287. I have a 22mm natural steel moto360(Serial #P0******GX) that I have had for less then a week. Before this version I had the horween leather version bought from best buy, I returned the leather version within 14 days because the back of the watch cracked from the leather strap putting pressure on the plastic back(Sic design flaw). I ordered the 22mm natural steel band version from you directly online at your site with moto care insurance. Today the plastic link that you added between the 22mm steel watch band and the watch body to correct said design flaw snapped on one side -- this IS a user serviceable part, when you purchase the 22mm natural steel watch band for $80 seperately it comes with this tiny plastic peice, and users are able to get new metal links sent to them when requested as well which are much harder to put on yet are STILL user serviceable parts. Well, Eddie insured me I could have a replacement plastic link protector peice sent to me and gave me this number to call to speak to the moto360 specialists: 866-320-4780 Well I called them, I spoke to jose who told me that I would have to return the watch and wait two weeks for a full replacement, this is absurd, there's not a damn thing wrong with the watch or watch band, I demanded to speak to the manager, and Jose hung up on me. I'm not returning my watch and going without it for two weeks after the hell ive been through just to get a tiny plastic peice worth less than a penny -- if that's the case I'll just wait until the back of the watch completely snaps or smash it myself because you guys created a faulty design and then motorola is out more money not me as they will have to replace it no questions asked. If there's some other resolution here I would be glad to hear about it as would everyone else with this problem over on xda and the other android forums who I will be reporting to with our chat transcript, any support is appreciated.
Gary: See this link: http://forum.xda-developers.com/mot...nsert-metal-banded-360s-t2953580#post57120023
Communication with the Oracle RightNow CX Cloud Service Chat service has been lost. Please wait while attempts are made to restore the connection.
Disconnection in 240 seconds.
Connection resumed.
Ryan: This is for repair?
Gary: Yes.
Ryan: I do apologize for that.
Ryan: Let me transfer you to right department, is that okay?
Gary: It seems like alot of time and trouble to go through to get the tiny plastic user servicable part.. you know? Thank you. That would be very appreciated.
Ryan has disconnected.
Mak: Hi, my name is Mak. How may I help you?
Gary: Hi Mak, I'm not sure if you can, I hope so! Are you able to see the previous chat transcripts?
Gary: Let me say ahead of time I'm in a real bad mood after dealing with some of the phone support guys at moto, so please don't take it personally.
Mak: I understand you with that.
Mak: Yes I can see the previous chat transcript.
Mak: Please give me a minute to read it first.
Gary: If this isn't a user servicable part you guys can send out -- you really have to make it one.
Gary: the watch band is supposed to be user changable.. it's just a tiny plastic peice that slips over the band when you attach the band.
Gary: They added it to prevent the problems that were happening with the backs cracking on the leather versions.
Mak: Will this for the Moto 360 device?
Gary: Yeah exactly. the 22mm natural steel moto360
Gary: In this link there are photos of the peice: http://forum.xda-developers.com/mot...nsert-metal-banded-360s-t2953580#post57120023
Gary: there's alot of people that are popping up on the various android forums that are having this issue.
Mak: In this case sir since you have reached the Technical support for Android phones, I have to give you a call and transfer you over to our Moto 360 department.
Gary: Would it be possible to get the number for the moto360 specialists? was it the correct number before?
Gary: It seems silly that they want to spend the time and employee resources instead of sending me the tiny plastic peice that's worth less then a penny
Gary: they don't have them to spare with the nexus 6 stuff going on
Mak: Sure. Please give me one minute.
Mak: Here is the number that you can call 8663204780.
Gary: That's a bummer, that's the number I called previously..
Gary: Is there a way you could escalate this to some one in charge of moto360 returns and repairs? they really need to be made aware of this issue
Gary: if we are allowed to change watch bands ourselves.. and this plastic peice is a part of the band.. it seems it should be a user servicable part
Mak: Yes. I will and I will let our higher management know about this as well.
Gary: Thank You Mak.
Gary: I really appreciate that
Mak: You are very much welcome.
Mak: Will there be anything else?
Gary: I'll try again with the moto360 phone support. Have a good holiday season mak
Mak: Happy holiday as well Sir.
---------- Post added at 06:44 PM ---------- Previous post was at 06:41 PM ----------
So i'm just going to wear it until the back snaps, then take a sledgehammer to it and send it back to them in peices in an envelope for return.
I'll continue to do this until they fix the user support problems, eventually they will get tired of me costing them money on watches.

I just want to add, that after being passed around alot more online chat support people who were "in the wrong department to assist me" and being hung up on a few times I finally found my way to the moto360 forum on motorola.com's official website.
I posted my problem there and I was actually able to get some real help from people that knew what I was talking about, and it seems like this issue is going to be passed up the food chain so that hopefully I and others in the future who break this plastic protector peice do not have to do a full rma return procedure.
Nothing has come of it yet, but it sounds promising, I will update when further progress is made.

garymaurizi said:
I just want to add, that after being passed around alot more online chat support people who were "in the wrong department to assist me" and being hung up on a few times I finally found my way to the moto360 forum on motorola.com's official website.
I posted my problem there and I was actually able to get some real help from people that knew what I was talking about, and it seems like this issue is going to be passed up the food chain so that hopefully I and others in the future who break this plastic protector peice do not have to do a full rma return procedure.
Nothing has come of it yet, but it sounds promising, I will update when further progress is made.
Click to expand...
Click to collapse
Yeah. I decided to return mine and not even bother with an exchange. I don't want to have to worry about RMAing it every month for a cracked back, especially since it appears to be a lottery on whether you get a good unit or not. Since I LOVED having an Android Wear device, I knew I'd miss having one. So I lucked out and picked up a LG G Watch for $80 + a $50 Google Play credit from Best Buy yesterday (so probably cost me like $40 after selling the code for like $40). Yeah, it's not as pretty as the Moto 360 is, but that price was too good to pass up. Hopefully, it should get me by until they fix the issue or come out with the 2nd gen 360. Having notifications at a glance is so much more convenient than I ever thought it would be. Good luck to you and everyone waiting for them to rectify the issue. I really do hope Moto get their act together for you guys.

My watch had the black plastic piece break as well after two weeks. Of course it happened after the two week best buy return period. The black piece is still installed, just had a few pieces break off. I figure I'll wait a week or two for a Motorola response.

I'm on my 2nd watch. Bought it from BestBuy and got the 2 year replacement too. They took the first one back because of the cracked back. It was a full semicircle from each side of the band. I googled a bit and found Moto saying its a warranty issue for cracking backs. I'm extra cautious now with mine. Even if its not an issue and no one ever sees it, I know the crack is there. I have about 21 months still of replacements from BestBuy. My bet is that a new model will be out within 2 years and eventually I'll get store credit towards a new one.

One of my little black spacers just cracked too. Only been wearing the watch since Christmas. Any updates on the people just trying to get this one piece replaced?
Ill have to try to contact moto when I get off of work today.

I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.

agentaaron said:
I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.
Click to expand...
Click to collapse
Glad you got replacements. I'm going to try the twitter route. Which twitter account did you contact? @motorolasupport ?
Sent from my Nexus 4 using XDA Free mobile app

Well after reading about all the cracked backs due to the steel bands I have decided on remains with my leather band.
The design of the 360 is fantastic look wise but has an inherently bad flaw due to the position of the band and pin locations. Yes there is a design flaw.
I have had other Moto products, I had a Moto x first generation and very familiar with moto's design flaws. The Moto x had a Kevlar back which cracked and yes mine did crack in around the volume and power buttons.
I guess sometimes beautiful designs don't always work as planned.
I do think Moto has and will improve upon their next generation Moto 360 or design pin attachments that sits tight in the band slot.
If I had the right tools or time I could easily design an attachment that would prevent the steel band from cracking the plastic back.

flashallthetime said:
If I had the right tools or time I could easily design an attachment that would prevent the steel band from cracking the plastic back.
Click to expand...
Click to collapse
Like this https://www.kickstarter.com/projects/1183644800/steelconnect-m-adapters-for-moto360-smartwatch
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
jarsh92 said:
Glad you got replacements. I'm going to try the twitter route. Which twitter account did you contact? @motorolasupport ?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thats the one

I
agentaaron said:
Like this https://www.kickstarter.com/projects/1183644800/steelconnect-m-adapters-for-moto360-smartwatch
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
Thats the one
Click to expand...
Click to collapse
Pretty close, although I would prefer if that extension pin would be fixed. I would have also preferred if screws would be used rather than the typical expansion wrist band pins, this would allow for much easier and user friendly customization

Just and update. Going the twitter route worked out well. Received two plastic spacers today priority through FedEx. All I had to really do was send a pic in an email.
I did go ahead and order the m180 from steelconnect for when these spacers break. Might have to get another band as the moto band probably won't look right with it. Will have to wait and see.
Overall I was impressed with the moto support I had through twitter/email.
Sent from my Nexus 7 using XDA Free mobile app

agentaaron said:
I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.
Click to expand...
Click to collapse
Congratulations on getting some help through twitter! What users helped you out in receiving your information?

call this 1-800-734-5870
they are aware. they are sending me a pair and i requested if possible to give me 4pcs and they said yes.

i hope the plastic on my black metal band doesn't give out
since i'm in Canada, i'm not sure i'll receive the same level of support

I guess it pays to have a big wrist. I've had my 360 since September with a bunch of different bands both metal and leather with no cracked back. But, with a big wrist the band leaves the watch perpendicular to the housing and doesn't touch the back.

charesa39 said:
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Click to expand...
Click to collapse
If you wear your watch literally on your wrist where your joint moves, then this will be the reason why you were able to break the plastic inserts. By wearing it on my arm, no matter how far I bend my wrist naturally, it doesn't cause any pressure that could break the plastic inserts or the back.
It's likely how you're wearing the watch that's the cause.
deltatux

[Q] Camera Strap?

Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.

werds said:
Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.
Click to expand...
Click to collapse
I'm not sure where you are located, but I found a lanyard for a USB thumb drive at Staples (or possibly Office Depot) in the US for something like $2. Small enough to thread through the slot, and for $2 won't break the bank.

FranzDages said:
I'm not sure where you are located, but I found a lanyard for a USB thumb drive at Staples (or possibly Office Depot) in the US for something like $2. Small enough to thread through the slot, and for $2 won't break the bank.
Click to expand...
Click to collapse
Hmmm that sounds like a cool idea! And fortunately for me we still do have a Staples in town lol

I'm not convinced that a strap is the best use for that hole... surely any strap you manage to get in there will be so thin as to offer little in the way of strength to be trusted for something as heavy as a phone. I always assumed it was for the Japanese trend of dangling a million toys and charms off the phone as opposed to dangling your phone off your wrist

Best camera wrist strap lanyard for Sony Xperia Z3 Compact is LIM'S
See LIMS limsdesign "dot" com and go to the Etc. section. It's good for the Z3C.
Enuf said!

werds said:
Ok, so I see that the phone has a camera strap eyelet at the bottom left (at least I hope that is what I am looking at). I rummaged through old camera straps I have and even the thinnest was too thick to fit into the eyelet.. even after trying to thread a pull through using sewing thread to pull it through....
Being as there are SOME situations I foresee wanting to take a picture using the phone but still wanting a way to secure it (pictures while on boats, in crowded areas holding above head, Disney trip etc.) Has anyone spotted a GOOD camera strap/lanyard that they recommend and have used? Obviously looking through ebay and amazon pop up quite a few but none that I could be certain fit through the eyelet nor that are good quality.
Click to expand...
Click to collapse
I managed to get my Sony point and shoot camera (TX200) strap through the eyelet, also using a cotton tread to pull it through, and the cord was just thick enough to to fit the gaps and provide a sturdy hold. Don't want the phone to slip out of hand when taking photos whilst snorkelling, I'm sure that sucker is going to be really slippery when under water, what with the glass front and back. It going to be a real test of how waterproof this phone is!

LondonMpee said:
I managed to get my Sony point and shoot camera (TX200) strap through the eyelet, also using a cotton tread to pull it through, and the cord was just thick enough to to fit the gaps and provide a sturdy hold. Don't want the phone to slip out of hand when taking photos whilst snorkelling, I'm sure that sucker is going to be really slippery when under water, what with the glass front and back. It going to be a real test of how waterproof this phone is!
Click to expand...
Click to collapse
I don't have it attached to my z3 compact, but I think it would be possible. I have a pentax floating camera strap attached to my panasonic TS5 (which is an awesome stand alone underwater camera). No idea where you would find one, any camera shop maybe? I'm in Canada and bought it at London Drugs. Ignore the caribiner, that was just for attaching the strap to my equipment.
EDIT: Tested it, took a bit of work but I was able to get the thread through the lanyard loop on the z3 compact. Floating strap might be good choice in water, even if it looks a little silly.