[Q] APN for M8 for T-mobile? Sms issues? - One (M8) Q&A, Help & Troubleshooting

Hey guys I have a rooted m8 for T-mobile, lately sms messages have not been sending, my phone says that the text sent however the person will not ever receive the text. This happens with multiple ppl. It's not my sms app as I have tried multiple apps. I have tried re flashing Rom and wiping and trying new roms. So I'm thinking it could be my apn. I'm having no other issues, Internet is fine, calls are fine, just texts. I changed my settings to:
Name: T-mobile US LTE
APN: fast.t-mobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: not set
MMS port: not set
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms,hipri,dun
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4
APN enable/disable: APN enabled
Bearer: unspecified
MVNO type: none
MVNO value: not set
I'm going to try this out and see if this works. I looked up apn setting, however every link I clicked were different apn settings. There were tons of different variations, so idk which I should go with. Any help would be appreciated!

Related

[FIX] Cricket mms fix

Open voice dialer and say open apn's. change apn to match the following.
name: cricket
APN: wap.mycricket.com
proxy: not set
port: not set
username: [email protected]
password: cricket
server: not set
MMSC: http://mms.mycricket.com/servlets/mms
mms proxy: not set
mms port: 8080
mcc: 310
mnc: 120
authentication type: pap or chap
apn type: mms
apn protocol: ipv4
apn roaming protocol: ipv4
bearer: unspecified
Download the mms.apk from below and use es file explorer to replace the one located in /system/app.
reboot phone and your good to go.
http://dl.dropbox.com/u/60307432/Mms.apk
notification not working?
Hey there,
I appreciate the instructions and link! However, after I installed the alternative mms app, I am no longer receiving notifications for new incoming messages. In addition, mms appears to work intermittently.
I am on ICS 4.0.4 (CM9 ROM) if that helps. Any thoughts? Appreciate it!
hi
will this work for metropcs ??? im on ics 4.0.4 ?
it takes a while to send sometimes but it will go through. As far as recieving make sure your apn is correct

Request: AT&T APN

Recently, as of today, I have not been able to send any MMS messages.
Restored multiple nandroids, checked IME and everything else I can think of. However, I have not been able to find a listed stock AT&T APN on this site.
Currently, this is what I am using:
APN: PTA
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,mms,supl
APR ptotocol: IPv4
Can someone with working MMS please paste their APN settings in here?
System Settings> More Settings> Mobile Networks > Access Point names> Select apn
gaveup said:
Recently, as of today, I have not been able to send any MMS messages.
Restored multiple nandroids, checked IME and everything else I can think of. However, I have not been able to find a listed stock AT&T APN on this site.
Currently, this is what I am using:
APN: PTA
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,mms,supl
APR ptotocol: IPv4
Can someone with working MMS please paste their APN settings in here?
System Settings> More Settings> Mobile Networks > Access Point names> Select apn
Click to expand...
Click to collapse
looks correct to me, u need a smartphone data plan for this to work i believe. My sim is non-smartphone data plan and it wont work for me, but when i stick in someone elses smartphone sim, these settings work.
Yeah. No idea how, but MMS now works. Didn't change a thing...
Add ",hipri" after supl.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Lte support thread

To keep the development threads clean, you can post your APN data and steps taken to remedy any LTE data related issues.
Thanks,
Trem
TELUS originally posted by: yeahitsgotahemii
NAME : TELUS SP
APN : SP.TELUS.COM
PROXY : NOT SET
PORT : NOT SET
USERNAME: NOT SET
PASSWORD : NOT SET
SERVER : NOT SET
MMSC : HTTP://ALIASREDIRECT.NET/PROXY/MMSC
MMS PROXY: 74.49.0.18
MMS PORT: 80
MCC: 302
MNC: 220
AUTHENTICATION TYPE: NONE
APN TYPE : INTERNET + MMS
APN PROTOCOL : IPV4
ENABLE/DISABLE APN: APN ENABLED (CHECKED)
BEARER: UNSPECIFIED
NAME: TELUS ISP
APN: ISP.TELUS.COM
PROXY NOT SET
PORT NOT SET
USERNAME NOT SET
PASSWORD NTO SET
SERVER NOT SET
MMSC NOT SET
MMS PROXY NOT SET
MMS PORT NOT SET
MCC 302
MNC 220
AUTHENTICATION TYPE NONE
APN TYPE DUN
APN PROTOCOL IPV4
ENABLE/DISABLE APN APN ENABLED (CHECKED)
BEARER UNSPECIFIED
If you encounter issues with this apn, try (posted by MaverickHHH):
"APN TYPE : INTERNET + MMS" should be "APN TYPE : DEFAULT,MMS".
Also that thread set the following proxy, port:
Proxy: 74.49.0.18
Port: 80
BELL/VIRGIN
NAME: BELL INTERNET
APN: PDA.BELL.CA
PROXY: NOT SET
PORT: NOT SET
USERNAME: NOT SET
PASSWORD: NOT SET
SERVER: NOT SET
MMSC: HTTP://MMS.BELL.CA/MMS/WAPENC
MMS PROXY: WEB.WIRELESS.BELL.CA
MMS PORT: 80
MCC: 322
MNC: 610
AUTHENTICATION TYPE: NOT SET
APN TYPE: INTERNET + MMS
APN PROTOCOL: IPV4
BEARER: UNSPECIFIED
I am on Bell and I found repeating the MMS proxy setting in the main proxy window allowed me get LTE back.
Sent from my SGH-I317M using xda premium
Edit..after multiple test with different apn types am getting the same speed around 10-12 mpbs
Mine is Rogers LTE works on and off aftet flashing custom rom and fixed it by deleting all apn settings and just reset it to default. It pick up my networks apn settings automatically.
Sent from my SGH-I317M using xda premium
jon3sh said:
Mine is Rogers LTE works on and off aftet flashing custom rom and fixed it by deleting all apn settings and just reset it to default. It pick up my networks apn settings automatically.
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
Can I get the APN for Rogers and I'll add it to the op?!
TREMER said:
Can I get the APN for Rogers and I'll add it to the op?!
Click to expand...
Click to collapse
Name: Rogers LTE
APN: ltemobile.apn
MMSC:*http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
Mns port: 80
Mcc: 302
Mcc: 720
Authentication Type: none
Apn type: internet + mms
Bearer: unspecified
Name: LTE Tethering
Apn: ltedata.apn
Mcc: 302
Mnc: 720
Authentication type: none
Apn type: dun
Bearer: unspecified
jon3sh said:
Name: Rogers LTE
APN: ltemobile.apn
MMSC:*http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
Mns port: 80
Mcc: 302
Mcc: 720
Authentication Type: none
Apn type: internet + mms
Bearer: unspecified
Name: LTE Tethering
Apn: ltedata.apn
Mcc: 302
Mnc: 720
Authentication type: none
Apn type: dun
Bearer: unspecified
Click to expand...
Click to collapse
For the longest time while on Fido (Fido is a Rogers Sub-brand), I could not get the Tethering to work. It seems that (at least for Fido guys) the the APN for LTE Tethering should be 'ltemobile.apn' just like the regular data one.
Telus APN update
Thanks OP for starting this thread.
I finally got my LTE working. You can remove the following:
"Also that thread set the following proxy, port:
Proxy: 74.49.0.18
Port: 80"
I left that as <NOT SET> and it was fine.

[Q] build.prop unlock, need mms settings for att gophone

I unlocked my sprint g2 with the build.prop method and then flashed justin's rom. then I changed the apn to this one:
apn: phone
proxy: not set
port: not set
username: not set
password: not set
mmsc: mmsc.cingular.com (with http in front)
mms proxy: wireless.cingular.com
mms port:80 (ive tried 8080 too)
mcc:310
mnc:410
authentication type: none
apn type: default
apn protocol: IPv4
Everything works, but MMS. data works, normal text works but I cannot send or receive MMS. Can anyone share their MMS settings for att gophone? or do I have to change something else? Thank you

{How to} hotspot/tether stock 183.46.15.XT907 on GSM Straighttalk

I got the native Hotspot working on gsm-unlocked RAZR M with Straighttalk/ATT sim!
(Not sure if this has already been posted, but I struggled with this for awhile, so I wanted to share).
It would always fail, and tell me to activate this feature call ATT.
All I had to do was edit the APN settings to include "dun"...and boom, it worked!
My APN settings:
Name: straight talk
APN: tfdata
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mms-tf.net
MMS proxy: mm3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,admin,fota,mms,hipri,dun (and no spaces after commas)
APN protocal: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: none

Categories

Resources