Related
Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only')
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13H
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Apr 11 2012,02:17:11
In fastboot, it will not allow me to flash to boot, system or recovery. Various errors appears like:
- not allowed
- error code 0000008 (or something)
- '...' then 'complete', but its a total lie because its done nothing.
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!
You're on wrong section mate.
You will have better assistance in Q&A section.
Tips: you need 1.28.771.x RUU to revert to stock. 1.26.771.2 won't work as yours is HBOOT-0.94.0000
I tried
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed
and it says there is a customer id error,
Do i need specifically 1.28.771?
Jaso333 said:
I tried
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed
and it says there is a customer id error,
Do i need specifically 1.28.771?
Click to expand...
Click to collapse
Yes as that is the correct one for three UK, that's why you had the I'd error.
ckpv5 said:
You're on wrong section mate.
You will have better assistance in Q&A section.
Tips: you need 1.28.771.x RUU to revert to stock. 1.26.771.2 won't work as yours is HBOOT-0.94.0000
Click to expand...
Click to collapse
Well, he has 'developed' a brick....it's just not the development that's normally discussed here ;-)
ewok666 said:
Well, he has 'developed' a brick....it's just not the development that's normally discussed here ;-)
Click to expand...
Click to collapse
Haha!
Sorry , don't wanna laugh on the brick but what he said was funny.
Sent from my HTC One X using Tapatalk 2
Even though my CLID is coming up at 'NONE'?
It'll say none but you'll have the 3UK CID - you will have to wait for the 1.28.771.9 RUU to surface (if at all) or send it back to 3
Jaso333 said:
Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only')
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13H
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Apr 11 2012,02:17:11
In fastboot, it will not allow me to flash to boot, system or recovery. Various errors appears like:
- not allowed
- error code 0000008 (or something)
- '...' then 'complete', but its a total lie because its done nothing.
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!
Click to expand...
Click to collapse
Have you tried unlocking the bootloader again to flash anything?
or
In fastboot "fastboot boot new-recoveryver.img"
Then "adb push rom.zip /sdcard/"
fastboot boot says its not allowed
wtfhax said:
Have you tried unlocking the bootloader again to flash anything?
Click to expand...
Click to collapse
Quoting myself
it wont let me unlock the bootloader!
to prove this:
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Android>fastboot oem unlock Unlock_code.bin
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.030s]
finished. total time: 0.030s
completely ruined?
yea this happened to my phone
I had to reboot it a few times and keep trying fastboot oem unlock/lock
it should come good.
Jaso333 said:
Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only'
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!
Click to expand...
Click to collapse
Had you try reflash stock recovery. I had successfully Ruu 1.26.707.2 from cook 1.28.401.09 then OTA to 1.28.707.10 and pass through a lot of pain warnings.
With correct original ruu, it allows you to recover (try mainfixer.bat) to origin factory status.
Sent from my HTC One X using xda premium
Jaso333 said:
it wont let me unlock the bootloader!
to prove this:
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Android>fastboot oem unlock Unlock_code.bin
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.030s]
finished. total time: 0.030s
completely ruined?
Click to expand...
Click to collapse
Proper unlock command
fastboot flash unlocktoken Unlock_code.bin
EddyOS said:
It'll say none but you'll have the 3UK CID - you will have to wait for the 1.28.771.9 RUU to surface (if at all) or send it back to 3
Click to expand...
Click to collapse
Just seen on twitter @Three_UK have just tweeted that 1.28.771.9 is available.
wtfhax said:
Proper unlock command
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
DUDE [email protected] A F***ING LIFE SAVER!!!!!!!
I WAS USING THE WRONG COMMAND TO UNLOCK IT... FFS. IM SUCH AN IDIOT
ITS ALL WORKING NOW
Now to cancel the HTC Service.....
Hello,
I try to Unlock the Bootloader of my HTC Desire HD.
I do the method of HTCDev, but, when I do this command:
fastboot flash unlocktoken Unlock_code.bin
I have this message:
sending 'unlocktocken' (0 KB)... OKAY [ 0.013s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.017s
I try to re-dowload a Unlock_code.bin, but it doesn't change my probleme...
I put a PD99IMG for test if it do sth but my version is older, so the zip is unseless...
Can you help me?
***LOCKED (OOW)***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011
MaloZ said:
Hello,
I try to Unlock the Bootloader of my HTC Desire HD.
I do the method of HTCDev, but, when I do this command:
fastboot flash unlocktoken Unlock_code.bin
I have this message:
sending 'unlocktocken' (0 KB)... OKAY [ 0.013s]
writing 'unlocktocken'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.017s
I try to re-dowload a Unlock_code.bin, but it doesn't change my probleme...
I put a PD99IMG for test if it do sth but my version is older, so the zip is unseless...
Can you help me?
***LOCKED (OOW)***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011
Click to expand...
Click to collapse
Why are You trying to unlock the bootloader? It Is useless. Anyway, the bootloader Is PD98IMG not PD99
glevitan said:
Why are You trying to unlock the bootloader? It Is useless. Anyway, the bootloader Is PD98IMG not PD99
Click to expand...
Click to collapse
I want unlock the bootloader for S-OFF and root my phone, and install a Rom Costum.
In the Advanced Ace Hack Kit manuel, it is write: Unlock the bootloader using the HTC DEV bootloader unlock process.
Do you know an other average to do that?
MaloZ said:
I want unlock the bootloader for S-OFF and root my phone, and install a Rom Costum.
In the Advanced Ace Hack Kit manuel, it is write: Unlock the bootloader using the HTC DEV bootloader unlock process.
Do you know an other average to do that?
Click to expand...
Click to collapse
No. but that only applies if you have the last 2.3.5 update in your inspire. Then, you are in the right way, if not there's no need to unlock it. Regarding the fail message, seems that the file unlock token is not ok. Do you have a md5sum to check?
dont know if this is relevant, but my dhd was on 2.3.5 when i ran the hack kit and i didnt use htc dev, yet im rooted and s-off
willstanners said:
dont know if this is relevant, but my dhd was on 2.3.5 when i ran the hack kit and i didnt use htc dev, yet im rooted and s-off
Click to expand...
Click to collapse
No it is not relevant. You are not supposed to unlock the bootloader. That is just for Inspire's running the lastest at&t build. All other builds are mainly supported.
glevitan said:
No it is not relevant. You are not supposed to unlock the bootloader. That is just for Inspire's running the lastest at&t build. All other builds are mainly supported.
Click to expand...
Click to collapse
Well, I'm going to test put S-OFF and root my HDH With Advanced Ace Hack Kit without unlock
Edit:!
I try, but it Fail: AAHK say to me: Read the Effen Manuel! Don't Watch the TV!
Have I to unlock the bootloader or not?
I am on Android 2.3.5, Sense 3.0.
So, now, I can run the AAHK, but he says to me: You have to Dowgroad.
When I put the PD98IMG on my SdCard and run into the bootloader, my HDH says: Update fail! Main Version is older!
What can I do >< ?
MaloZ said:
So, now, I can run the AAHK, but he says to me: You have to Dowgroad.
When I put the PD98IMG on my SdCard and run into the bootloader, my HDH says: Update fail! Main Version is older!
What can I do >< ?
Click to expand...
Click to collapse
Did you say that you were rooted and S-OFF earlier? If so why are you running AAHK?
All it's work, now it's good ^^!
Just be the Downgroad with AAHC and it works!
Thank you all!
Hello,
Before yesterday I wanted rooter my HTC Desire HD, it took me so the downgrade (I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1424023)
When flash PD98IMG.zip 1.32, the phone is put out and since there is more time to boot (HBOOT or normal). Only after waiting 12 minutes on the phone the HTC boot logo. and vibrates without stop.
It is no longer recognized by USB.
What to do? Thank you in advance, Valentin
Sorry for the text, but I use Google Translation
Valounours said:
Hello,
Before yesterday I wanted rooter my HTC Desire HD, it took me so the downgrade (I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1424023)
When flash PD98IMG.zip 1.32, the phone is put out and since there is more time to boot (HBOOT or normal). Only after waiting 12 minutes on the phone the HTC boot logo. and vibrates without stop.
It is no longer recognized by USB.
What to do? Thank you in advance, Valentin
Sorry for the text, but I use Google Translation
Click to expand...
Click to collapse
Cool...you missed this:
This guide is for phones shipped with froyo and updated to the 3.x firmware! For phones shipped with gingerbread (even the lower versions) please read attn1's posts in this thread!
Click to expand...
Click to collapse
You messed your bootloader and now is in superslow motion. Use this and no other stuff or you will probably end up with a bricked device:
http://tau.shadowchild.nl/attn1/?p=188
glevitan said:
Cool...you missed this:
You messed your bootloader and now is in superslow motion. Use this and no other stuff or you will probably end up with a bricked device:
http://tau.shadowchild.nl/attn1/?p=188
Click to expand...
Click to collapse
I followed the tutorial, I manage to get to HBOOT but I can not navigate...
Are your volume keys broken?
bananagranola said:
Are your volume keys broken?
Click to expand...
Click to collapse
No because i can boot in Bootloader and the power key don't also works
Valounours said:
No because i can boot in Bootloader and the power key don't also works
Click to expand...
Click to collapse
Huh??
bananagranola said:
Huh??
Click to expand...
Click to collapse
No they are not broken because I can get to HBOOT
Valounours said:
No they are not broken because I can get to HBOOT
Click to expand...
Click to collapse
this is painful, but do this: power off the device, take sdcard out and then reboot in hboot and see if you are able to navigate.
Then follow what I posted you earlier
I followed your advice but it did not work, impossible to navigate
Valounours said:
I followed your advice but it did not work, impossible to navigate
Click to expand...
Click to collapse
You need to wait ages for that to happen. Your hboot is in super slow motion.....wait about 20 to 30 minutes
Ok, I Wait
I followed the method but getting at:
"fastboot flash zip-PD98IMG HBFX.zip"
I get:
"C: \ IAMADUMBASS> fastboot flash zip-PD98IMG HBFX.zip
sending 'zip' (262 KB) ... OKAY [0.068s]
writing 'zip' ... INFOadopting the signatures contained in this image ...
INFOsignature checking ...
FAILED (remote: not allowed)
finished. total time: 3.241s "
Any idea?
Valounours said:
I followed the method but getting at:
"fastboot flash zip-PD98IMG HBFX.zip"
I get:
"C: \ IAMADUMBASS> fastboot flash zip-PD98IMG HBFX.zip
sending 'zip' (262 KB) ... OKAY [0.068s]
writing 'zip' ... INFOadopting the signatures contained in this image ...
INFOsignature checking ...
FAILED (remote: not allowed)
finished. total time: 3.241s "
Any idea?
Click to expand...
Click to collapse
Phone must be in fastboot USB And not hboot USB plug
It was in Fastboot USB
Valounours said:
It was in Fastboot USB
Click to expand...
Click to collapse
Is your bootloader unlocked?
Non, it S-On
Valounours said:
Non, it S-On
Click to expand...
Click to collapse
S-ON and unlocked are different stuff. If your bootloader is not unlocked and fastboot is not working, that sounds bad...
I can't Unlock.
When i unlock with : "fastboot oem get_identifier_token"
The cmd said :
" ... INFO[ERR] Command error !!!
OKAY [ 0.020s]
finished. total time: 0.020s"
My Bootloader :
ACE PVT SHIP S-ON
HBOOT-0.85.0007
MICROP-0438
RADIO-26.03.02.26_M
eMMC-BOOT
Oct 11 2012,12:47:02
Valounours said:
My Bootloader :
ACE PVT SHIP S-ON
HBOOT-0.85.0007
MICROP-0438
RADIO-26.03.02.26_M
eMMC-BOOT
Oct 11 2012,12:47:02
Click to expand...
Click to collapse
ok, then you are not in a good situation. Maybe your last resort is to flash a RUU...but that can definitely brick your device.
hello,
I own a 32 GB HOX and I need to completly stocked my phone using the RUU
I just dont know which one I have to choose
my CID is : HTC_044
Thank you !
Stop making threads with different stories. Its confusing.
Who wins a hox that does not work. Return it and get a new one !!!
http://forum.xda-developers.com/showthread.php?t=2374320
Mr Hofs said:
Stop making threads with different stories. Its confusing.
Who wins a hox that does not work. Return it and get a new one !!!
http://forum.xda-developers.com/showthread.php?t=2374320
Click to expand...
Click to collapse
I meant 'own'
I just noticed it .
That clears things up !
Fastboot getvar version-main
That will tell you the number of the ruu you need
Mr Hofs said:
That clears things up !
Fastboot getvar version-main
That will tell you the number of the ruu you need
Click to expand...
Click to collapse
Ok than
I already used the right RUU and Run it
Now after using in the RUU the HOX immediately boots into bootloader
I tried to flash a new boot with no success
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash boot boot.
img
sending 'boot' (5200 KB)...
OKAY [ 0.651s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.854s
Click to expand...
Click to collapse
But what is now exactly your goal, i see so many different things everywhere....
But to answer this question :
A boot.img (the kernel) can't be flashed with a locked/relocked bootloader, after you ran the ruu your bootloader is either locked or relocked and you need to unlock it first to be able to flash anything !
Mr Hofs said:
But what is now exactly your goal, i see so many different things everywhere....
But to answer this question :
A boot.img (the kernel) can't be flashed with a locked/relocked bootloader, after you ran the ruu your bootloader is either locked or relocked and you need to unlock it first to be able to flash anything !
Click to expand...
Click to collapse
First of all thank you !
my goal is just to be able to use the DAM PHONE
Currently my bootloader is LOCKED and I can't manage to unlock it
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash unlocktoke
n Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.130s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Unknown error))
finished. total time: 4.747s
Click to expand...
Click to collapse
THis happens after choosing the 'YES' option in the HOX
And it stays relocked after a reboot ?
Then get a new code at the HTC dev site ....maybe that helps
Mr Hofs said:
And it stays relocked after a reboot ?
Then get a new code at the HTC dev site ....maybe that helps
Click to expand...
Click to collapse
Even after a reboot it stays ***LOCKED***
I tried to get a new code
A different error this time
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash unlocktoke
n Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.011s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Too many links))
finished. total time: 3.501s
Click to expand...
Click to collapse
I tried agagin with another Unlock_Code.bin and I get a different every time
FAILED (status read failed (Unknown error))
FAILED (status read failed (Too many links))
every time a different one
Any help with that ?
Well actually no ! If the token get flashed to the phone and you see the unlock screen its all correct. If it stays unlocked like yours do then i can't do anything unfortunately
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Mr Hofs said:
Get a brand new one via the HTC dev site and try again. But why on earth did you relock it to begin with ?
Click to expand...
Click to collapse
I followed some "back to stock" guide (from h t t p s://w w w.youtube.com/watch?v=SZuAjz4PIjU) for HOX that included installing a stock recovery and relocking the phone. However, I couldn't find the correct RUU. I tried using a new unlock token from HTCdev but obviously it didn't work as it's identical. Thanks for the help though!
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Mr Hofs said:
Lesson learned....never do something before you gathered all the files needed !
Are you flashing the token correctly, is the phone connected to the pc on a usb 2.0 port (not a usb hub or other in between connection) ?
You were unlocked, what does the bootloader say now ?
Locked or relocked ?
Click to expand...
Click to collapse
The phone is connected directly to the USB and it is Relocked, occassionally showing the "security warning" under it. I downloaded the correct nandroid backup for the phone, but as I don't have a custom recovery I'm not able to use it. I tried to flash a stock recovery (again) but I keep getting the same "FAILED (remote: not allowed)" whenever I try to do any changes to the phone.
Why it is btw that we can't have a RUU for a certain version? No way to downgrade ?
S-on devices cant downgrade,only s-off devices can. But you need to find a shop that can offer that specific service, can't do it in anyway at home.
But i see you flash the unlock code from a specific folder. Try it like this :
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Mr Hofs said:
Open the command prompt directly from the fastboot.exe folder and place the unlock code.bin file in that specific directory too ! Then perform the unlock fastboot command again
Click to expand...
Click to collapse
Unfortunately that didn't work. It seems there's not much I can do now.
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
man all credits goes to @vastloper and next time it will be good to copy the command from the HTCdev site not to write it manually use the right command
@vastloper it will be good to quote him to see your comment. when you quote him he will receive the notification and will see his mistake with sure:good:
vastloper said:
you did fastboot flash unlocktocken instead of fastboot flash unlocktoken.
trying to flash to a non existing partition gives this error.
I had same problem when I did fastboot flash unlock instead of unlocktoken
so unlock with ck and token without ck
Click to expand...
Click to collapse
Thanks a lot! :victory: I did indeed make a typo on that, and used the same command over and over again without rewriting it.
I was able unlock and recover back to stock. However, I'm not still able to use my phone due to the blank/black screen issue, and will be further investigating that.
Does anyone have a O2__001 CID Stock Rom??
jjgittes said:
Hi,
I've relocked my HOX (1.72 HBOOT, 4.18.401.4 mainver, and HTC__Y13 CID) but now I'm not able to unlock it to install cwm. When I try to unlock via fastboot I get the following error:
C:\Users\XXX>fastboot flash unlocktocken c:\Unlock_code.bin
sending 'unlocktocken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktocken'...
FAILED (remote: not allowed)
finished. total time: 0.354s
How should I proceed? Thanks guys
Click to expand...
Click to collapse
Are you have battery take new unlocktoken and try again