[HELP ME] Possible BRICK, Need Help BIGTIME - HTC One X

Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only')
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13H
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Apr 11 2012,02:17:11
In fastboot, it will not allow me to flash to boot, system or recovery. Various errors appears like:
- not allowed
- error code 0000008 (or something)
- '...' then 'complete', but its a total lie because its done nothing.
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!

You're on wrong section mate.
You will have better assistance in Q&A section.
Tips: you need 1.28.771.x RUU to revert to stock. 1.26.771.2 won't work as yours is HBOOT-0.94.0000

I tried
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed
and it says there is a customer id error,
Do i need specifically 1.28.771?

Jaso333 said:
I tried
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed
and it says there is a customer id error,
Do i need specifically 1.28.771?
Click to expand...
Click to collapse
Yes as that is the correct one for three UK, that's why you had the I'd error.

ckpv5 said:
You're on wrong section mate.
You will have better assistance in Q&A section.
Tips: you need 1.28.771.x RUU to revert to stock. 1.26.771.2 won't work as yours is HBOOT-0.94.0000
Click to expand...
Click to collapse
Well, he has 'developed' a brick....it's just not the development that's normally discussed here ;-)

ewok666 said:
Well, he has 'developed' a brick....it's just not the development that's normally discussed here ;-)
Click to expand...
Click to collapse
Haha!
Sorry , don't wanna laugh on the brick but what he said was funny.
Sent from my HTC One X using Tapatalk 2

Even though my CLID is coming up at 'NONE'?

It'll say none but you'll have the 3UK CID - you will have to wait for the 1.28.771.9 RUU to surface (if at all) or send it back to 3

Jaso333 said:
Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only')
*** RELOCKED ***
*** Security Warning ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13H
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Apr 11 2012,02:17:11
In fastboot, it will not allow me to flash to boot, system or recovery. Various errors appears like:
- not allowed
- error code 0000008 (or something)
- '...' then 'complete', but its a total lie because its done nothing.
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!
Click to expand...
Click to collapse
Have you tried unlocking the bootloader again to flash anything?
or
In fastboot "fastboot boot new-recoveryver.img"
Then "adb push rom.zip /sdcard/"

fastboot boot says its not allowed

wtfhax said:
Have you tried unlocking the bootloader again to flash anything?
Click to expand...
Click to collapse
Quoting myself

it wont let me unlock the bootloader!
to prove this:
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Android>fastboot oem unlock Unlock_code.bin
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.030s]
finished. total time: 0.030s
completely ruined?

yea this happened to my phone
I had to reboot it a few times and keep trying fastboot oem unlock/lock
it should come good.

Jaso333 said:
Hi All,
I have severely screwed up my One X.
The status of my device is as follows:
Normal boot will go directly to bootloader, no operating system on it. The bootloader appears as follows:
(before this appears, some strange red text flashes saying 'This build is for development purposes only'
My network is Three UK, this is a result of getting halfway through running:
"RUU_ENDEAVOR_U_ICS_40_H3G_UK_1.26.771.2_Radio_1.1204.90.13H_release_251403_signed.exe"
Then it telling me that my bootloader version is incorrect.
Future runs of this tell me that my battery is too low, even though I chareged it till green last night.
If it 'reboot bootloader' the same screen as above loads without the *** Security Warning ***
Nothing Ive found on these forums work, Im in serious need of HELP!!
Click to expand...
Click to collapse
Had you try reflash stock recovery. I had successfully Ruu 1.26.707.2 from cook 1.28.401.09 then OTA to 1.28.707.10 and pass through a lot of pain warnings.
With correct original ruu, it allows you to recover (try mainfixer.bat) to origin factory status.
Sent from my HTC One X using xda premium

Jaso333 said:
it wont let me unlock the bootloader!
to prove this:
C:\Android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.020s]
finished. total time: 0.020s
C:\Android>fastboot oem unlock Unlock_code.bin
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.030s]
finished. total time: 0.030s
completely ruined?
Click to expand...
Click to collapse
Proper unlock command
fastboot flash unlocktoken Unlock_code.bin

EddyOS said:
It'll say none but you'll have the 3UK CID - you will have to wait for the 1.28.771.9 RUU to surface (if at all) or send it back to 3
Click to expand...
Click to collapse
Just seen on twitter @Three_UK have just tweeted that 1.28.771.9 is available.

wtfhax said:
Proper unlock command
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
DUDE [email protected] A F***ING LIFE SAVER!!!!!!!
I WAS USING THE WRONG COMMAND TO UNLOCK IT... FFS. IM SUCH AN IDIOT
ITS ALL WORKING NOW
Now to cancel the HTC Service.....

Related

Locking/relocking bootloader

Hey guys, I'm not very adept at android stuff so please bear with me.
I unlocked my bootloader yesterday via the HTC Dev site with an attempt to convert my ROM to CM10 (the Jellybean one). However, I realized that the process was a little too complex for me, so I decided to relock the bootloader first until I decide whether I want to get CM10/figure the process out.
Hence, I relocked the bootloader using the cmd command fastboot oem lock.
So, what I see on the command prompt is something similar to this.
<Bootloader> Lock successfully
FAILED <status read failed <Too many links>>
finished. total time: 0.142s
On the bootloader window (is that what you guys call it? It's the window you get when booting the phone while pressing power+volume down),
the information (in pink and green text) reads:
*** Relocked ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW Secure boot: disabled
MODEM PATH : OFF
Jun 28 20212, 11:31:28
I apologize for being a little paranoid, but since I didn't "flash" any custom ROMs or anything, but merely unlocked and relocked the bootloader, is there anything which might brick my phone when the next OTA comes in?
Also, should I be worried about the command prompt text (the one with FAILED) although the previous line reads "lock successfully"? After the relock my phone rebooted as normal, and I experience no problems using the phone.
Can anyone help with all this? Thanks in advance guys.
It's fine, you're good to go
All is good. As you haven't modified the ROM or recovery then ota will work fine.
The status read failed is nothing to worry about.
Mine does tat every time when locking or unlocking but none the less the process still completes
Sent from my Nexus 7
Thanks a lot for the replies. It had me worried there for a while. Cheers!
So if you have "relocked" your boot loader and want to unlock it again do you hace to flash the "Unlock_code.bin" again, or is there a faster way?
nuckel82 said:
So if you have "relocked" your boot loader and want to unlock it again do you hace to flash the "Unlock_code.bin" again, or is there a faster way?
Click to expand...
Click to collapse
Use the Unlock_code.bin again
sent from my One X using xda venom premium

[Q] Need RUU help to restore back to Stock

Before I start, , I want to say that I have read other similar posts and not found an answer to my query.
First, I just wanted to thank you for the wonderful stuff you guys do on these forums. I have used your expertise for many previous issues that I have had in the past. I cherish my Androids a lot more now thanks to you guys.Now, onto the problem that I am currently having. I will try to make it short.
SHORT VERSION:
I need help to unroot the phone and I can't get the "correct" RUU to work.
LONG VERSION:
I rooted my phone and installed Android Revolution HD for ICS. After a while, I decided to upgrade to JB via CM10.
At first, the WiFi would start giving me problems, it would get stuck at "on and never going off" or "off and never turning on." So I remedied that by just restarting the One X which was fine. Then the screen started to act up. Whenever I restart my phone the screen would work just fine. I would put it down for a while, but whenever the screen goes off, it responds slower and slower until the display no longer turns on. However, the phone still works as if it was on via the touchscreen. I can still open apps, just as long as I can guess where to go.
This left me with two thoughts:
1.) The screen is not broken because on restarts, or before it blacks out completely, the screen is just fine. No dead pixels, no lines, no light bleeding to anything.
2.) The OS (I think) is not broken because it always responds to what I am doing.
Therefore I think there exists a problem between the hardware trying trying to communicate with the screen. So I want to return the phone back to the manufacturer.
I have looked on other forums and I am here to ask for help. I can't find a way to solve my problem.
When I try to unroot, I get stuck at the RUU portion. And I honestly think I am using the correct RUU. As you guys know, I need to put the phone back to its original everything to get a chance for the manufacturer to help me out.
So please! Help me with the unroot!
On a side note: the phone works perfect when it is charging AND with the screen on. Don't know why.
This is my phones info from the HBOOT screen:
HBOOT-0.94.0000
CPLD-None
MICROP-None
RADIO-1.1204.90.13
eMMC-bootmade: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Apr 11 2012, 02:27:11
CID: HTC___622
For those that are wondering, this is the RUU that I used.
Endeavor/RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.26.708.2_Radio_1.1204.90.13_release_251215_signed.exe
Maybe that was the issue, I don't know. There are 4 HK (Hong Kong) RUUs if I'm not mistaken.
I look forward to your help and response!
Once again, thanks for all the helpful tips/tricks/flashes and roms.
Gratefully,
johnchiu
Oke are you familiar with the fastboot commands ?
Do these 2 commands with the phone in fastboot usb mode !
Fastboot getvar version-main
and
Fastboot oem readcid
To get the right info for the ruu you need !
Try this one:
http://htcruu.com/securekey.php?fil...Radio_2.1204.122.17_release_268338_signed.exe
Although, I thought the 2.17 was available, that one should install on your hboot.
You'll need to do:
fastboot oem lock
Then run the RUU as administrator (right click it).
So when I did the "fastboot oem lock" whenever I go back to the hboot, on top it says that my phone has been "***RELOCKED***"
I remember before I unlocked the phone it said ***LOCKED*** so if it now says ***RELOCKED*** and I want to ship it in for repairs...wouldn't that be a red flag that I tampered with the phone?
Also, I have SuperUser installed on the phone, how do I get rid of it? Because I think that looks awfully suspicious too haha.
I am downloading the RUU right now, hopefully it works, I will let you know how it goes. Thanks @BenPope
Your bootloader will always say that its been relocked after you unlocked it, can't do anything about that ! And the RUU will flash a stock rom, stock recovery and the stock boot.img back. So all traces of previous root is gone !
So what should I do to make my phone as close to it was first coming out of the box.
For example, I really want to get rid of SuperUser but I don't know how to.
How do I check if everything is stock? Etc.
Thanks again for your help!
Just run the ruu and everything is stock !!! Can't get closer to stock than that !
A ruu wipes the phone 100%
I tried it again...and it failed again. I don't know what to do.
Every RUU that I have tried to install so far all say:
ERROR [140]: BOOTLOADER VERSION ERROR
How is it possible that every version fails? Please help!
Hmm do the fastboot commands i posted in the beginning of the thread, the cid and main version commands ..... See whats comes out ?
Sorry forgot to post them. These are the latest ones.
C:\fastboot>fastboot getvar version-main
version-main: 2.18.401.2
finished. total time: 0.007s
C:\fastboot>fastboot oem readcid
...
(bootloader) DEBUG: cid: HTC__622
OKAY [ 0.025s]
finished. total time: 0.025s
There is the bug ! You need at least a 2.17 based RUU ! But i dont where to find it at the moment
Are there no ways around it? I can't be the only person with this problem can I? I purchased this phone back in May 2012. So my phone was one of the original units sent out. Thanks for your rapid response and time.
Maybe there is one at the file factory but i dont have an account there
secretaznmanxxx said:
Sorry forgot to post them. These are the latest ones.
C:\fastboot>fastboot getvar version-main
version-main: 2.18.401.2
finished. total time: 0.007s
C:\fastboot>fastboot oem readcid
...
(bootloader) DEBUG: cid: HTC__622
OKAY [ 0.025s]
finished. total time: 0.025s
Click to expand...
Click to collapse
That's odd.
You have the European version-main and a Hong Kong CID.
You might want to look for a backup of a HK ROM to restore.

[Q] HTC One X Bootloop. Help, please?

Hello,
I am completely new to the android world. I got an HTC One X (International) a while ago, and I tried to boot it and install a custom ROM. I followed some steps on a YouTube video, and I messed the situation so much that I can't find a way to fix it.
My phone is stuck in a bootloop and it won't work at all. When I get into the bootloader it gives me the following info. :
*** RELOCKED ***
ENDEAVOUR PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD- None
MICROP- None
RADIO- 5.1204.162.29
eMMC-bootmode: disabled
CPU- bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF​
I tried to download an RUU but I couldn't find the 3.16.415.4 Arabic version. I am very unfamiliar with the whole boot/roms thing.
Can anyone please help me?
Niklaus11 said:
Hello,
I am completely new to the android world. I got an HTC One X (International) a while ago, and I tried to boot it and install a custom ROM. I followed some steps on a YouTube video, and I messed the situation so much that I can't find a way to fix it.
My phone is stuck in a bootloop and it won't work at all. When I get into the bootloader it gives me the following info. :
*** RELOCKED ***
ENDEAVOUR PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD- None
MICROP- None
RADIO- 5.1204.162.29
eMMC-bootmode: disabled
CPU- bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF​
I tried to download an RUU but I couldn't find the 3.16.415.4 Arabic version. I am very unfamiliar with the whole boot/roms thing.
Can anyone please help me?
Click to expand...
Click to collapse
Unlock your bootloader because you relocked I don't know why then flash Philz 5.15.9 charge the phone inside recovery and when you finish with this we will see other thing
Thant said:
Unlock your bootloader because you relocked I don't know why then flash Philz 5.15.9 charge the phone inside recovery and when you finish with this we will see other thing
Click to expand...
Click to collapse
I tried to unlock the bootloader with "fastboot oem unlock", at first it gave me a <waiting for device> message and nothing ever happened. I tried again and it now gives me the following:
C:\Users\Home>fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.123s]
finished. total time: 0.124s​
I tried different cables and different USB ports and nothing changed.
Niklaus11 said:
I tried to unlock the bootloader with "fastboot oem unlock", at first it gave me a <waiting for device> message and nothing ever happened. I tried again and it now gives me the following:
C:\Users\Home>fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.123s]
finished. total time: 0.124s​
I tried different cables and different USB ports and nothing changed.
Click to expand...
Click to collapse
Go to Settings->Power->Fast boot..untick that box and try to do it again.
Niklaus11 said:
I tried to unlock the bootloader with "fastboot oem unlock", at first it gave me a <waiting for device> message and nothing ever happened. I tried again and it now gives me the following:
C:\Users\Home>fastboot oem unlock
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.123s]
finished. total time: 0.124s​
I tried different cables and different USB ports and nothing changed.
Click to expand...
Click to collapse
the command is not write the right command is fastboot flash unlocktoken Unlock_code.bin second install latest htc drivers or htc sync and then remove only htc sync. Report back

*** LOCKED *** ***SECURITY WARNING *** help ;(

Hello!
I need yours help. I'm stuck into a bootloader and i have ***LOCKED *** and *** SECURITY WARNING*** info. When i'm trying unlock the bootloader with HTCDev script it's work but it doesn't had effect on HOX and i had a ***LOCKED*** status anyway :/ When i go into the hboot menu i get new option "SECURITY RESET" but it's doesn't work too... I dont know how can i do with it :/ i have hboot 1.73. I apologize for my english. please help ;(
Edit: I have got somethink like this:
C:\ADB>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Too many links))
finished. total time: 2.515s
morphi18 said:
Hello!
I need yours help. I'm stuck into a bootloader and i have ***LOCKED *** and *** SECURITY WARNING*** info. When i'm trying unlock the bootloader with HTCDev script it's work but it doesn't had effect on HOX and i had a ***LOCKED*** status anyway :/ When i go into the hboot menu i get new option "SECURITY RESET" but it's doesn't work too... I dont know how can i do with it :/ i have hboot 1.73. I apologize for my english. please help ;(
Edit: I have got somethink like this:
C:\ADB>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Too many links))
finished. total time: 2.515s
Click to expand...
Click to collapse
This is normal and then you must to confirm on your phone you are agree to unlock the bootloader then your phone will reboot and you will see Unlocked=
And the thread will be moved in the right section
Thant said:
This is normal and then you must to confirm on your phone you are agree to unlock the bootloader then your phone will reboot and you will see Unlocked=
And the thread will be moved in the right section
Click to expand...
Click to collapse
This is not a first time when I unlocked a bootloader but this time it's not working. Anyway i've got ***LOCKED*** message and i don't know why :/ i tried to unlock HOX many times but i've got a ***LOCKED*** message. I've a new option i HBOOT too. It's name is SECURITY RESET. I don't have it earlier untill now..
morphi18 said:
This is not a first time when I unlocked a bootloader but this time it's not working. Anyway i've got ***LOCKED*** message and i don't know why :/ i tried to unlock HOX many times but i've got a ***LOCKED*** message. I've a new option i HBOOT too. It's name is SECURITY RESET. I don't have it earlier untill now..
Click to expand...
Click to collapse
I don't know some where I read after hboot 1.39 the unlock option not work every time
Thant said:
I don't know some where I read after hboot 1.39 the unlock option not work every time
Click to expand...
Click to collapse
But i done it successful on this device earlier on hboot 1.73... After few days i lock device because of installing stock from RUU file. After that my HOX has a bootloop to the bootloader and i can't Reunlock it again :/

Security status stuck at S-DBG

Hello everyone,
(was trying to ask this questions to dev thread but my "clearance" is not high enough
I recently played with my HTC10 - unlocked bootloader, did S-OFF, changed CID, etc - well, all that normal usual things
At some point later I decided to go back so I removed root, changed CID back and was trying to put security back to S-OFF when I accidentally used command
fastboot oem writesecureflag 2 (instead of 3).
At the next boot the phone showed me some strange window with some Chinese text, asking me for a password. I put 0000 and the phone told me that the password was Ok, but my data could not be decrypted. It formated everything and that was Ok, but now my security status says "S-DBG".
Now I can't change CID or MID, when I try it tells me:
[email protected]:~/phone# fastboot oem writecid HTC__621
...
FAILED (remote: WRITE CID PERMISSION ERROR)
finished. total time: 0.022s
If I try to change security level to anything, it gives me:
[email protected]:/home/alexr# fastboot oem writesecureflag 0
...
(bootloader) HTC KEY CARD VERSION: 7
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
finished. total time: 0.013s
[email protected]:/home/alexr# fastboot oem writesecureflag 3
...
(bootloader) HTC KEY CARD VERSION: 7
(bootloader) VERIFY_PASS (0)
(bootloader) Partition verify pass
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
finished. total time: 0.974s
[email protected]:/home/alexr#
I tried to use SunShine to reset that but the program told me my phone already had "S-OFF" whereas in fact it does not
Does anybody know what that "S-DBG" mean and more importantly - how to go back to either S-OFF or S-ON??
Thank you!
@beaups
He is one of the Sunshine devs and I'm mentioning him here so that he sees this post. No need to PM him
AlexFlooter said:
Hello everyone,
(was trying to ask this questions to dev thread but my "clearance" is not high enough
I recently played with my HTC10 - unlocked bootloader, did S-OFF, changed CID, etc - well, all that normal usual things
At some point later I decided to go back so I removed root, changed CID back and was trying to put security back to S-OFF when I accidentally used command
fastboot oem writesecureflag 2 (instead of 3).
...
Click to expand...
Click to collapse
I assume you are the same user that opened a support ticket with us. SunShine wasn't written to work with devices in this state. If you want to change your security status you'll need to use another (hardware) solution.
--beaups
beaups said:
I assume you are the same user that opened a support ticket with us. SunShine wasn't written to work with devices in this state. If you want to change your security status you'll need to use another (hardware) solution.
--beaups
Click to expand...
Click to collapse
Yeap, it was me.
Ok, thank you for the answer

Categories

Resources