Q&A for [N7105] Stock ROM for N7105, Guide for installation & Root.
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [N7105] Stock ROM for N7105, Guide for installation & Root.. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Root don't works
I flash the last stock rom for my note 2 t0lte : N7105XXUFNE3_N7105OXXFNE1_N7105XXUFND (kitkat 4.4.2) , it runs ok
I flash the advance philz recovery , it runs ok
i flash the Root_SuperSU.0.98-Busybox.1.20.2-signed.zip , it seems to run ok
But my phone is still not root. Super su says there is no su binary , all the apk whitch needs root don't work.
What did i did wrong ?
On my older rom ( jelly bean ) i was root whith no problem.... but i wanted to upgrade.
Any ideas to help me ?
root method n°3 doesn't work for my device
Root still don't works
I have the last stock rom for my note 2 t0lte find in sammobile site : N7105XXUFNE3_N7105OXXFNE1_N7105XXUFND (kitkat 4.4.2) , it runs ok but there are lots of bloatware.
I flash the advance philz recovery , it runs ok,
i flash the Root_SuperSU.0.98-Busybox.1.20.2-signed.zip , it seems to run ok, i mean when i flash the zip file, it says done , no error .
But when i reboot my phone is still not root. Super su says there is no su binary , all the apk whitch needs root don't work.
I did it three times, whithout success.
On my older rom ( jelly bean ) i was root whith no problem.
I hope some body can help me. ?
Related
Q&A for S3Rx 3.0 TouchWiz 4.3 NC2 (4-5-14) Full AROMA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for S3Rx 3.0 TouchWiz 4.3 NC2 (4-5-14) Full AROMA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
S3Rx ROM on T999LUVUBNF4
Good day.
I have recently update my Samsung Galaxy S3 SGH-T999L using kies.
Baseband version: T999LUVUBNF4
I wanted to install your ROM to my device but it says that the latest supported version is at T999UVUENC2. Is it possible to install it on UVUBNF4? Or if not, is it possible to revert back to NC2?
Your reply would be much appreciated. Thank you.
Phone unlocked
Hello there, I have my stock T999 4.3 rooted and unlocked (not factory unlocked) to use with other network. I would like to know if i flash and use this ROM will lock my S3 again? Thanks.
GoldenboyXD said:
Hello there, I have my stock T999 4.3 rooted and unlocked (not factory unlocked) to use with other network. I would like to know if i flash and use this ROM will lock my S3 again? Thanks.
Click to expand...
Click to collapse
should be fine
Best TMO S3 rom
I have to say ... this is the best TMO S3 rom without a doubt .. I've tried many KK, Lollipop , Cyaogenmod etc but not oTne comes close to the stability and battery life..
Thank you
Soft bricked my device
So I followed your instructions to the best of my ability.
1. Make sure you are on your most current modem... T999 = MJC || T999L = MK4 DocHoliday77 modem thread http://forum.xda-developers.com/show....php?t=1880987
(My rom is the latest which is UVUENC2)
2. Full Wipe
(Did that)
3. Install ROM.
(Did that) - then afterwards it prompted me to a white page install/menu section. Since I already installed the ROM through CWM I proceeded to select "Install Kernel Only" which is apparently step #4.
4.Make sure you choose KT747, DKP or MJ2 kernel during install.
(I chose DKP to install)
5. Profit... enjoy!
(I did not enjoy since my phone never booted, it was stuck on S3 logo, had to go back into recovery!)
Soooo what did I do wrong??
I love how xda encourages new users to ask questions in the Q&A tab and even suggest that their questions are more likely to be answered that way.
Few months later, still no answer on my Q above. Btw the way roms are organized on these forums are horrible. Please fix.
I wonder if anyone knows the answer to musnyk and lazy monster Q....I would like to know also....thanks?
If I could add on to the other questions posted. I have T999L with NF4. When I install this rom, end up with Baseband of NF4, Build of NC2 and seem to lose LTE capability. Would love to get the proper steps when dealing with an NF4 phone.
EDIT: Seems to be missing: persist.radio.lteon - do you know how I can add/create this?
To update the bootloader modem
The baseband version I currently have is T999UVUEMJC
I got the new NC2 bootloader modem package downloaded.
Complete NC2 bootloader and modem *Added 3-22-14* Thanks to @Synthetic.Nightmare
http://www.mediafire.com/download/fc..._modem_4.3.zip
Click to expand...
Click to collapse
Which option in odin is used to flash this package? PDA or Phone(CP)?
Error when flashing!!!! Help !!!!!!!
ok i have the 4.3 stock from tmobile i used a couple of cwn version but none of them are letting me flash it i keep getting an error that says (bad) Operation aboarded and it has the little android in a coma with no new room, i rooted the phone but still no luck any advice????
[Q&A] [MOD][T210/210R] Galaxy Tab 3 7.0 SM-T210x Performance Upgrade Pack [2014/04/0
Q&A for [MOD][T210/210R] Galaxy Tab 3 7.0 SM-T210x Performance Upgrade Pack [2014/04/05]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][T210/210R] Galaxy Tab 3 7.0 SM-T210x Performance Upgrade Pack [2014/04/05]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Galaxy Tab 3 7.0 SM-T210
Can someone link me to the correct post for rooting this tablet on stock KitKat rom? I would like t be able to use external SD card...
Also i am wondering if the performance upgrade pack will work on Stock KitKat rom.
Spidy1000 said:
Can someone link me to the correct post for rooting this tablet on stock KitKat rom? I would like t be able to use external SD card...
Also i am wondering if the performance upgrade pack will work on Stock KitKat rom.
Click to expand...
Click to collapse
To rooten yourTab you need to download Odin , supersu.zip and Recovery file ( CwM or Philztouch or TWRP ) flash it with Odin , Boot to The recovery and flash The lässt supersu.ZIP.
All other you will find at The dev Sektion thread for The Recovery what you want to flash.
I got both my tab 3 rooted, but still i would like to know if this performance "upgrade" will work on kitkat 4.4.2
Spidy1000 said:
I got both my tab 3 rooted, but still i would like to know if this performance "upgrade" will work on kitkat 4.4.2
Click to expand...
Click to collapse
Is there no one who can answer my question about kitkat?
Spidy1000 said:
Is there no one who can answer my question about kitkat?
Click to expand...
Click to collapse
So far this mod only works on 4.1.2
Andromeda 90 said:
So far this mod only works on 4.1.2
Click to expand...
Click to collapse
Thanks for your answer
Q&A for Official lollipop for t700
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Official lollipop for t700. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hopefully Indonesia soon
if i upgrade to the LP bootloader (then flash a LP TW-based, no-knox rom) and later decide to go back to KK, can i simply flash a KK bootloader then restore a KK backup/nandroid? or would odin prevent me from doing so?
maxq1 said:
if i upgrade to the LP bootloader (then flash a LP TW-based, no-knox rom) and later decide to go back to KK, can i simply flash a KK bootloader then restore a KK backup/nandroid? or would odin prevent me from doing so?
Click to expand...
Click to collapse
You don't need to flash a kk boot loader, lp bootloader is backwards compatible with kk.
Just flash your nandroid.
I recently flashed the Swiss Lollipop Rom and I want to downgrade to KK because the wifi is very unstable.
I'm very new to Samsung world (including Kies, odin) so I would like to have a little clarification.
My tablet was a UK rom with CSC BTU, then I flashed swiss lollipop (CSC BOC).
Is it ok if I flash this file http://www.sammobile.com/firmwares/download/43720/T700XXU1ANL1_T700BTU1ANL1_BTU/ with odin?
Do i need to flash something else? (bootloader?)
That will be fine. No need to mess with bootloader, though the Rom will already contain the bootloader.
I
Galaxy Tab S 8.4 Lollipop update demonstration: https://youtu.be/8Hw9QLOEgOM
[Q&A] F460K How to ROOT and Install RECOVERY on F460K stock Lollipop to install cust
Q&A for F460K How to ROOT and Install RECOVERY on F460K stock Lollipop to install custom ROMS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for F460K How to ROOT and Install RECOVERY on F460K stock Lollipop to install custom ROMS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
What if i have F460S ?
I hav 4.4.2 on my f460k n i hav rooted it.. Do i have to unroot to intall dis update or sud i jst go wid it.
How to go back to stock rom from cloudycat6 2.0?
hey thanks for this thread. i followed your instructions and thankfully it was successful.
I installed cloudycat6 2.0 instead of lamhoang and i wondered if i can still go back to stock. i've searched the cloudycat6 thread but i cant find answers. Can i install the recovery apk file in your instructions then wipe and flash lamhoang?
edit:
can i use lg flash tool to install the stock rom F460K20C_00.kdz directly while im running on cloudycat6 so that i can root it and install lamhaong afterwards ?
Better rom?
Hi guys! which is better for f460? cloudyfa or lamhoang one?
Q&A for [HOWTO][V500] Easily change between 4.2 and 4.4 Bootloaders
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOWTO][V500] Easily change between 4.2 and 4.4 Bootloaders. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloader for Lollipop 5.x question.
Hello, I have a V500 and I'm still on stock factory Jellybean 4.2.2 ROM but am rooted. If I want to upgrade to the stock Lollipop 30A international ROM or one of the Lollipop 5.1.1 ROMs floating around which bootloader should I use? Thanks in advance!
G-Rock13 said:
Hello, I have a V500 and I'm still on stock factory Jellybean 4.2.2 ROM but am rooted. If I want to upgrade to the stock Lollipop 30A international ROM or one of the Lollipop 5.1.1 ROMs floating around which bootloader should I use? Thanks in advance!
Click to expand...
Click to collapse
Nevermind. I got bored and got the courage to flash the 30A Korean ROM. This is what I did.
- First I upgraded TWRP to 2.8.7.1 via Flashify.
- Then I rebooted into the new TWRP recovery and made a Nandroid backup of my 4.2.2 setup.
- Then from TWRP I flashed Skin1980's 30A Lollipop zip file and made sure I cleared cache and Dalvik after install.
- When prompted to install SuperSU, I installed it. Then it will reboot.
- Upon reboot the tablet will update ~141 Lollipop files and all my data was intact!
Basically, I followed the post here.
Hopefully LG will release a US version of the Lollipop ROM. Good luck!