Hello everyone this is Shawiee. Lately I've been working on my HTC DHD and I've tried to root it with Kingo Root after I unlocked my bootloader. After doing that automatically a new recovery (CWM 5.0.4...) was installed so I thought I had permanent root and I was ready to install a custom rom. So I downloaded one called Jellytime 4.1.2 and after I wiped the factory data, cache and dalvik cache I installed the ROM. My phone is T-Mobile branded so whenever I try to turn it on it just vibrates once then freezes on the T-Mobile logo. I've tried many RUU's and many PD98IMG's to revert it to stock but none of them helped so I'm looking for a way to make it boot again, no matter what version of android or HTC Sense gets installed. I can lock/relock the bootloader because I have access to bootloader whenver I press volume down+power button so basically I just need a way to make it work again, so please if anyone can help me show me a way, completely if possible to make my HTC work again. It's S-ON, ACE V SHIP but you can look the photo down here to check the detalis:
Check the bootloader at the bottom of the page at the attachments, relocked for the moment but I can unlock it if it's needed. I never created a goldcard so if it's needed, please show me how to!
I also have a photo of how the screen shows up when I try to power on, that T-Mobile logo so there are three photos.
Finally, I repeat I just want a way back to make my HTC Desire HD work again, no matter if rooted or unrooted, no matter the version of android I just want a working RUU, PD98IMG or whatever. Peace, Shawiee. :laugh:
Your prob is that your device is branded. T-Mobile. Find the thread pertaining to your device. U might have to flash a t mobile branded ruu
---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------
Since you can access boot loader. Do that and in a cmd prompt run fastboot getvar all. That will help us see your specs
marknoll said:
Your prob is that your device is branded. T-Mobile. Find the thread pertaining to your device. U might have to flash a t mobile branded ruu
---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------
Since you can access boot loader. Do that and in a cmd prompt run fastboot getvar all. That will help us see your specs
Click to expand...
Click to collapse
Of course, check the detalis down there.
There is a problem about the RUU, I can't find a T-Mobile RUU, that's why I started this thread.
Here are the results after fastboot getvar all:
----------------------------------------------------------------
C:\Win32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.111.3
(bootloader) serialno: HT0C6RX01162
(bootloader) imei: 352668048832354
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3821mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
--------------------------------------------------------------------------------
Are you from the u.k? There are ruus for your T-Mobile device
marknoll said:
Are you from the u.k? There are ruus for your T-Mobile device
Click to expand...
Click to collapse
No, I'm not actually. I'm from Kosovo, a place in Balkan but do you really know anyway to fix my phone?
http://htcpedia.com/forum/htc-desir...pping-ruus-radios-update-zips-[13-06-10].html
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------
[/COLOR. Um... Yea you are. Kosovo is a u.k entity
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------
[/COLOR. Um... Yea you are. Kosovo is a u.k entity[/QUOTE]
I'd really appreciate you a lot for this but can you be more specific with which RUU should I choose in that page and is there anything to do except following the instructions for the RUU? And are you sure this is for HTC DESIRE HD?
Look at your cidnum..also look at your baseband version. Put those two things in Google search engine. Ie: tmob101 cidnum HTC desire
---------- Post added at 09:02 PM ---------- Previous post was at 09:01 PM ----------
http://forum.xda-developers.com/showthread.php?t=2278900
marknoll said:
Look at your cidnum..also look at your baseband version. Put those two things in Google search engine. Ie: tmob101 cidnum HTC desire
---------- Post added at 09:02 PM ---------- Previous post was at 09:01 PM ----------
What should I excatly do after I download all the parts? I never used to work with a Nandroid backup.
Click to expand...
Click to collapse
No no. Not that. I was just showing u an example
---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------
Your best bet is to post in ace think tank thread here on xda
---------- Post added at 09:16 PM ---------- Previous post was at 09:08 PM ----------
http://forum.xda-developers.com/showthread.php?t=1824379
marknoll said:
No no. Not that. I was just showing u an example
---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------
Your best bet is to post in ace think tank thread here on xda
---------- Post added at 09:16 PM ---------- Previous post was at 09:08 PM ----------
Alright, I started downloading a RUU.exe that's for Desire HD, it's the correct CID and the correct T-MOB. One last question. To run the RUU in the right way with .exe do I need to have S-OFF or Goldcard?
Click to expand...
Click to collapse
Shawiee said:
marknoll said:
No no. Not that. I was just showing u an example
---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------
Your best bet is to post in ace think tank thread here on xda
---------- Post added at 09:16 PM ---------- Previous post was at 09:08 PM ----------
Alright, I started downloading a RUU.exe that's for Desire HD, it's the correct CID and the correct T-MOB. One last question. To run the RUU in the right way with .exe do I need to have S-OFF or Goldcard?
Click to expand...
Click to collapse
Ruus require a locked bootloader
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
Related
Having Htc one x s720e ,Vendor: O2 UK, Last Version Was:1.29.206.11
Unlocked boot-loader Via HTC-Dev
flashed clockwork-touch-5.8.4.0-endeavoru.img
than From the recovery menu, performed a full wipe, as follows:
Selected Wipe Data or Factory Reset, and click Yes to confirm.
Selected Wipe Dalvik Cache
Selected Mounts and Storage, then selected Format /system and confirmed.
Than
Downloaded the following files:
HOX_4.2.zip (md5sum: 263be5dd54791b7c9d896505f094bc8d)
Slim_Common.zip (md5sum: a113d2d7bf326e64e79f427089154b33)
Flashed with Zip..
everything goes fine...
but cant boot the phone...
its in blinking mode.....HTC quality brilliant....
than .......
tried official RUU method..but getting error :cant update
any help....
crazy_kamal said:
Having Htc one x s720e ,Vendor: O2 UK, Last Version Was:1.29.206.11
Unlocked boot-loader Via HTC-Dev
flashed clockwork-touch-5.8.4.0-endeavoru.img
than From the recovery menu, performed a full wipe, as follows:
Selected Wipe Data or Factory Reset, and click Yes to confirm.
Selected Wipe Dalvik Cache
Selected Mounts and Storage, then selected Format /system and confirmed.
Than
Downloaded the following files:
HOX_4.2.zip (md5sum: 263be5dd54791b7c9d896505f094bc8d)
Slim_Common.zip (md5sum: a113d2d7bf326e64e79f427089154b33)
Flashed with Zip..
everything goes fine...
but cant boot the phone...
its in blinking mode.....HTC quality brilliant....
than .......
tried official RUU method..but getting error :cant update
any help....
Click to expand...
Click to collapse
You can relock the phone and flash the ruu. it wont work with an unlocked bootloader. The easiest method is to download the right RUU file for you phone. Check that by-
Enter fastboot on phone.
Open cmd on PC
-fastboot oem readcid
then you need to flash stock boot.img Search the forum, stock boot.img are all over here and place it in the fastboot directory.
-fastboot flash boot boot.img
and then relock bootloader.
-fastboot oem lock
make sure you download the right RUU for your CID.
Once you have it flash it.
hope this helps
Drew071
thanks a lot bro.....
solved phone with minor changes.....
1. fullwiped from recovery
2. erase cache in fastboot
3. flashed boot.img found in rom zip file
4. installed rom from recovery
no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071
Help please
drew071 said:
no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071
Click to expand...
Click to collapse
I know I'm a bit late to this, but I'm having a similar problem. Trouble is I can't find the right RUU version. Only found the 1.26 version, I need the 1.29.206.11. Can anyone help me in finding this, or alternatively if there is a stock restore I can have?
Currently running RD MIUI, Rooted, with CWM recovery. Microphone has stopped working and I need to send it back to O2 but want to get back to vanilla before I do.
Only part i'm stuck at is getting the stock ROM back, starting to get a little desperate!
drew071 said:
no probs. If you face any problems in the future follow this thread for a comprehensive guide on what to do next.
http://forum.xda-developers.com/showthread.php?t=1660807
drew071
---------- Post added at 03:49 PM ---------- Previous post was at 03:27 PM ----------
just a heads up put [solved] in the header.
drew071
Click to expand...
Click to collapse
Bro need little help from u........:angel:.
i tried to go back to stock rom...
everything u desribed, i follow n ok...
but getting this error: Error [140]: Bootloader version error
My CID : O2___001
Tried RUU :RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed
FULL INFO OF MY PHONE:
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: 1.1204.90.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: HTXXXXXXXX
INFOimei: 35XXXXXXXXXXX
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3841mV
INFOdevpower: 57
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Hey there,
Lately i have been trying to flash a Cyanogenmod 11.1 (unofficial rom), but as you read this on XDA you already now it failed.
I have an HTC Desire HD, and have CWM installed, But am not rooted since it was unrooted when CWM was installed. When i tried to flash the rom i first did the usual stuff (wiping data, dalvik and battery stats). and after that i tried to flash it, but the installation aborted because of error 1(not sure if it was 1 or 7).
From that point i cant do anything with my phone except going into the HBoot menu, and going into recovery.
When i just power up the phone i shows the HTC booting logo, and after that it automatically goes to CWM.
In the Hboot menu it shows me:
**** UNLOCKED ****
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Dec 22 2011, 14:28:19
And i can select Fastboot, recovery, factory reset, simlock or image crc.
I tried flashing some other roms, but all of them failed. I also tried a few different RUU's but these also failed..
Hope someone can help
Can you access bootloader? If so, you're not bricked.
Sent from my ATRIX HD using Tapatalk
marknoll said:
Can you access bootloader? If so, you're not bricked.
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
Yes, i can.
Plug in pc while in fb and type fastboot getvar all
done
marknoll said:
Plug in pc while in fb and type fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.52.27
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: SH0CFRX00052
(bootloader) imei: 352668046479398
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4165mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
What recovery are u currently using? Remember to flash boot.img in fastboot after flashing rom
---------- Post added at 07:03 PM ---------- Previous post was at 07:02 PM ----------
I see that u are not supercid..if u want full root, u need to make a goldcard
marknoll said:
What recovery are u currently using? Remember to flash boot.img in fastboot after flashing rom
---------- Post added at 07:03 PM ---------- Previous post was at 07:02 PM ----------
I see that u are not supercid..if u want full root, u need to make a goldcard
Click to expand...
Click to collapse
I am currently using CWM Touch (i dont now the version number, i guess its the newest)
How can i flash boot.img
I tried to make a goldcard, but for some reason it cant find my phone when i press GetCid
It's cuz ur s on
---------- Post added at 07:10 PM ---------- Previous post was at 07:08 PM ----------
http://m.youtube.com/watch?v=5xVl2dBTnmI
installation aborted status 1
whenever i install cyanogenmod 7.2.0 it gives me an status 1 error, i now download a rom called cm-jellytime
Status 1 and 7 are meaning incompatible hboot
Sent from my Desire HD using Tapatalk
---------- Post added at 07:42 PM ---------- Previous post was at 07:42 PM ----------
I mean recovery
Sent from my Desire HD using Tapatalk
it worked
marknoll said:
Status 1 and 7 are meaning incompatible hboot
Sent from my Desire HD using Tapatalk
---------- Post added at 07:42 PM ---------- Previous post was at 07:42 PM ----------
I mean recovery
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Thank you very very much. it's starting the boot from the jelly rom!
Your best bet is to flash an old recovery..cwm 2.3- then flash cm 7. Getting to cm 7 can help pc see the phone
Sent from my Desire HD using Tapatalk
---------- Post added at 07:44 PM ---------- Previous post was at 07:44 PM ----------
Ok. Ignore previous post. Good job
Sent from my Desire HD using Tapatalk
gapps?
can i just flash gapps over all the other installations
Fastboot Flash
jakob4613 said:
Hey there,
Lately i have been trying to flash a Cyanogenmod 11.1 (unofficial rom), but as you read this on XDA you already now it failed.
I have an HTC Desire HD, and have CWM installed, But am not rooted since it was unrooted when CWM was installed. When i tried to flash the rom i first did the usual stuff (wiping data, dalvik and battery stats). and after that i tried to flash it, but the installation aborted because of error 1(not sure if it was 1 or 7).
From that point i cant do anything with my phone except going into the HBoot menu, and going into recovery.
When i just power up the phone i shows the HTC booting logo, and after that it automatically goes to CWM.
In the Hboot menu it shows me:
**** UNLOCKED ****
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Dec 22 2011, 14:28:19
And i can select Fastboot, recovery, factory reset, simlock or image crc.
I tried flashing some other roms, but all of them failed. I also tried a few different RUU's but these also failed..
Hope someone can help
Click to expand...
Click to collapse
If you are still having this problem, i recommend installing a rom from cwm and then (since you're s-on) going to your computer, opening the rom zip, taking out the boot .img, then going into bootloader on your phone going down to fastboot then plug it in to your computer and fastboot flash the boot.img. fastboot tutorials are all over youtube.
K3V1N1990 said:
If you are still having this problem, i recommend installing a rom from cwm and then (since you're s-on) going to your computer, opening the rom zip, taking out the boot .img, then going into bootloader on your phone going down to fastboot then plug it in to your computer and fastboot flash the boot.img. fastboot tutorials are all over youtube.
Click to expand...
Click to collapse
Already linked. Lol
Sent from my Desire HD using Tapatalk
jakob4613 said:
can i just flash gapps over all the other installations
Click to expand...
Click to collapse
Yes you can..but it's a good idea that u wipe dalvik and cache before flashing gapps
Sent from my Desire HD using Tapatalk
Friends
I have a HTC Desire HD, with the following specs:
CyanogenMod 11-20140804-unofficial/M9-ace
Android 4.4.4
It has TWRP as recovery
SHIP S-ON RL
HBOOT-2-00-0029
RADIO-026.14.04.28_M
I want to install a new port from Mustaavalkoista, but before that I want to make my phone s-off.
But I am struggling doing that, so wanted to ask for some ideas how I can best proceed. I do not want my phone bricked.
Thanks for good suggestions,
Calle
Visit ace think tank thread.
marknoll said:
Visit ace think tank thread.
Click to expand...
Click to collapse
Thanks, marknoll. I looked at that thread and at the various options for getting s-off and it seems that it is not easily done.
I know how to install a updated ROM without having s-off so I just have to stick to that method then.
Thanks
Calle
S off is feasible.
---------- Post added at 01:06 PM ---------- Previous post was at 01:02 PM ----------
Run fastboot getvar all plz. Wanna see your specs
marknoll said:
S off is feasible.
---------- Post added at 01:06 PM ---------- Previous post was at 01:02 PM ----------
Run fastboot getvar all plz. Wanna see your specs
Click to expand...
Click to collapse
Here they are:
C:\android-sdk-windows\platform-tools>fastboot devices
HT226RX01480 fastboot
C:\android-sdk-windows\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: HT226RX01480
(bootloader) imei: 356357040337036
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4194mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.091s
C:\android-sdk-windows\platform-tools>
Hope it helps.
Thanks
Calle
Yes. Your bootloader needs to be downgraded to .0027
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Visit this thread. http://forum.xda-developers.com/showthread.php?t=2367322
I saw your convo with Scotty. Didn't that ever work out?
marknoll said:
I saw your convo with Scotty. Didn't that ever work out?
Click to expand...
Click to collapse
Sorry, I have forgotten what happened and it is a while ago.
Anyay here is my latest to your suggestion on that thread
:
Do you want me to run the script mentioned and forget about the latter part, the flashing of the current Phiber 2000?
It says I have to have:
- original ROM
Original boot image ( this is not the HBOOT)
original Recovery
Not sure if I have those?
It says I need a formatted card. I do, with data and a functioning Cyanogen installed. Will that script wipe it?
Sorry about all the questions.
Calle
Idk to be honest. I used the original aahk which ran the script for me. All I did was hit buttons.lol. try aahk2 again..or maybe search for the users glevitan ,bannagranola or gizmoe. They can help
marknoll said:
Idk to be honest. I used the original aahk which ran the script for me. All I did was hit buttons.lol. try aahk2 again..or maybe search for the users glevitan ,bannagranola or gizmoe. They can help
Click to expand...
Click to collapse
Thanks, friend
I do think I do not dear to try it as I do not have much spare time to fix things in case it goes wrong. I can live with the s-on for now.
Thanks anyway for your good suggestions.
Have a blessed Spring
Calle
I'm serious. Pm one of those guys. They won't mind . they have been very helpful to me over the years
What did u figure out?
marknoll said:
What did u figure out?
Click to expand...
Click to collapse
Hi Marknoll and thanks for your follow up. I appreciate that.
I wrote one of the guys you mentioned but have not heard back. I am not pursuing this actively but if someone gives me some good ideas I might still try them.
Thanks
Calle
Did you ever scope out the aahk2 thread yet?
Thanks
Yes, I did but I found it to be too risky to try, so I did not want to pursue it.
Calle
It isnt
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
I think your issue is making a gold card
---------- Post added at 01:55 PM ---------- Previous post was at 01:53 PM ----------
Check this out too. http://forum.xda-developers.com/showthread.php?t=2436481
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
Another user to contact would be cedarctic
Thanks for the suggestion.
I had already downloaded the Windroid Universal Android Toolkit but am not sure how to use it. I have wondered what the gold card is all about. They say on those pages that it can get s-off on HTC HD's but no-one really explains how to do it.
Anyway, I will not be able to do anything until later next week as I do not have the computer handy on which I have tried to get the HTC to have s-off.
Thanks
Calle
The tool kit works
I write here because i can't write to he's thread.
I installed the 6.0 rom for my HTC One M8 from graffixnyc, but has not sound and it write's driver error, unknown problem. What's the problem?
I have S-on, custom recovery (twrp) and unlock bootloader. Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Thanks for the help!
Sorry for my bad English, I'm Hungarian!
Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general
timbohobbs said:
Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general
Click to expand...
Click to collapse
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly, but i can use it from Hungary with my Hungary sim card.
I wanna try to upgrade once and the phone bricked and i install twrp and a stock rooted rom from android revolution hd.
You'll probably run into problems if your firmware is out of date. S off may get you out of a hole
peti439 said:
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly
Click to expand...
Click to collapse
By DE you mean Developer's Edition? But your top post says T-MOB101.
If you don't know what your version is, you'll never get an RUU to work.
You can restore to stock nandroid from the collection posted on these threads, but again you need to know your correct CID version.
Do fastboot getvar all, and post the output (be sure to delete IMEI and serial numbers, as these are personal info) and we may be able to determine your actual CID version.
---------- Post added at 02:31 PM ---------- Previous post was at 02:31 PM ----------
peti439 said:
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
You need s-off to change CID.
redpoint73 said:
By DE you mean Developer's Edition? But your top post says T-MOB101.
Click to expand...
Click to collapse
T-Mobile DE (Germany) - T-MOB101 - software version no. x.xx.111.x
ckpv5 said:
T-Mobile DE (Germany) - T-MOB001 - software version no. x.xx.111.x
Click to expand...
Click to collapse
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
Agreed ... a typo is corrected - should read T-MOB101
redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
I go to my computer and make a picture for the cidnum number. Wait a little
Here's what i got. My Hboot is 3.19.0.0000 and the Radio is 1.25.214500021.06G ( I don't know this are need )
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.111.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxx
(bootloader) imei: xxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
peti439 said:
Here's what i got.
Click to expand...
Click to collapse
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
peti439 said:
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-main: 4.19.111.2
Click to expand...
Click to collapse
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
peti439 said:
Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.
redpoint73 said:
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
Click to expand...
Click to collapse
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.
peti439 said:
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.
Click to expand...
Click to collapse
Try to flash again.
Did you read the ROM thread to see if others had this issue?
redpoint73 said:
Try to flash again.
Did you read the ROM thread to see if others had this issue?
Click to expand...
Click to collapse
I flashed the rom three times and doesn't work. I not see others have any issues.
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
redpoint73 said:
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.
Click to expand...
Click to collapse
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?
peti439 said:
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?
Click to expand...
Click to collapse
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
peti439 said:
I flashed the rom three times and doesn't work. I not see others have any issues.
Click to expand...
Click to collapse
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?
redpoint73 said:
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?
Click to expand...
Click to collapse
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.
peti439 said:
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.
Click to expand...
Click to collapse
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?
redpoint73 said:
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?
Click to expand...
Click to collapse
I downloaded two times. Once my computer and second time to my girlfriend laptop ( that was three days ago ) and doesn't work, the zip was not corrupted.
My Htc stuck on HTC LOGO.. what can i do??
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1d456ef7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
all: Done!
@NAAS1,
have you now tested a Factory Reset in the Bootloader?
You know how you start into the bootloader?!
Best regards,
leather.face ...
leather.face said:
@NAAS1,
have you now tested a Factory Reset in the Bootloader?
You know how you start into the bootloader?!
Best regards,
leather.face ...
Click to expand...
Click to collapse
Yes i did but still this same. When customer came with this phone, was working(almost) it showed error every 15s, some application stopped working, and after few grs just hang on on HTC logo. I trying to find correct RUU for this phone but i dont know what is correct.I know how to boot to fast mode and i have skills to use prompt command in ADB console. Regards
NAAS1 said:
Yes i did but still this same. When customer came with this phone, was working(almost) it showed error every 15s, some application stopped working, and after few grs just hang on on HTC logo. I trying to find correct RUU for this phone but i dont know what is correct.I know how to boot to fast mode and i have skills to use prompt command in ADB console. Regards
Click to expand...
Click to collapse
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Sent from my htc_m8qlul using XDA Labs
---------- Post added at 08:39 PM ---------- Previous post was at 08:31 PM ----------
leather.face said:
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Click to expand...
Click to collapse
Edit: Sorry I was wrong with the RUU as .exe File. What for a RUU found you???
Sent from my htc_m8 using XDA Labs
leather.face said:
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Sent from my htc_m8qlul using XDA Labs
---------- Post added at 08:39 PM ---------- Previous post was at 08:31 PM ----------
Edit: Sorry I was wrong with the RUU as .exe File. What for a RUU found you???
Sent from my htc_m8 using XDA Labs
Click to expand...
Click to collapse
I found zip.file, but i dont know is correct or no.
NAAS1 said:
I found zip.file, but i dont know is correct or no.
Click to expand...
Click to collapse
Can you please share this RUU Link with me here?
THX! :good:
Kind regards,
leather.face ...
PS: You can a signed RUU.zip flash in the Bootloader but you must this Zip copy on your external microSD Card.
Don't forget to rename from:
rom.zip
to
0PKVIMG.zip
0 is zero!
Sent from my HTC One M8s using XDA-Developers mobile app
leather.face said:
Can you please share this RUU Link with me here?
THX! :good:
Kind regards,
leather.face ...
PS: You can a signed RUU.zip flash in the Bootloader but you must this Zip copy on your external microSD Card.
Click to expand...
Click to collapse
https://ruu.lalleman.net/HTC_M8S(QL...8_15.00_016_F_release_450409_combined_signed/
Chiko-HH said:
Don't forget to rename from:
rom.zip
to
0PKVIMG.zip
0 is zero!
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Should i do this from TWRP???
No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
Chiko-HH said:
No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Or read this carefully,this should be working
http://forum.xda-developers.com/showthread.php?t=3190238
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:43 PM ---------- Previous post was at 06:40 PM ----------
Chiko-HH said:
No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
Or read this carefully,this should be working
http://forum.xda-developers.com/showthread.php?t=3190238
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Begin from 1st Thread [emoji106]
Sent from my HTC One M8s using XDA-Developers mobile app
NAAS1 said:
https://ruu.lalleman.net/HTC_M8S(QL...8_15.00_016_F_release_450409_combined_signed/
Click to expand...
Click to collapse
Why you do not try to update via the bootloader?!
Rename the RUU.zip to 0PKVIMG.zip and when you have copy this Zip on your external microSD, you can Flash.
Okay I hope also that it is the correct RUU for your device but it does not work then contact the HTC Support.
I've done it in the past often and I was helped.
Sure NAAS1, when you have again questions then write here.
Best regards,
leather.face ...
Edit: @NAAS1, have you also on your device the correctly Stock recovery or the TWRP??? You need the Stock recovery for a Factory Reset in the Bootloader !
Thanx for help, i solved my problem flashing rom.zip in fastboot. I have to used Htc Fastboot.