Develop Bugs

how to s off htc desire

how to s off htc desire...........................................

mak1983 said:
how to s off htc desire...........................................
Click to expand...
Click to collapse
use this ...http://revolutionary.io/ ....works fine....and then to flash hboot http://alpharev.nl/
simple....
good luck
---------- Post added at 01:56 PM ---------- Previous post was at 01:55 PM ----------
http://forum.xda-developers.com/showthread.php?t=1275632

torrice said:
use this ...http://revolutionary.io/ ....works fine....and then to flash hboot http://alpharev.nl/
simple....
good luck
---------- Post added at 01:56 PM ---------- Previous post was at 01:55 PM ----------
http://forum.xda-developers.com/showthread.php?t=1275632
Click to expand...
Click to collapse
not really. how do u know what hboot he has? revolutionary only works with hboot 0.93 and1.02.
and then flash hboot? why? it depends on what rom he wants to use. theres more to learn before that anyway.
at OP, turn off ur phone then press & hold volume down + power and then post what it says in bootloader. click the desire all things root guide in my sig, everything u need is there for setting up ur computer with hboot drivers, ul need these IF u have to use revolutionary and also theres simple guides to gain s-off + root, whatever ur hboot.

Hey,
(Sorry for my bad english I hope you can read it!)
Yesterday my aunt gives me her old htc Desire. I unlocked the bootloader with the tools from htcdev.com and install CWM over fastboot. I´ve tried to install some Roms, but they don´t run really. So I restore the backup from the stock Rom that I made with CWM. But now my phone is running very bad. Sometimes it boots, sometimes it crashed by the htc picture. Freeze there and after 10 - 20 Secound it reboot and freeze again.
What are my mistake? Do I need S-Off or is Bootloader Unlocked the same? What must I do that I can install Roms so that they run?
Thank you,
timia2109
Edit (some more Information):
hBoot : 1.03.003
Radio: 5.11.05.27
htc Desire LCD

Timia2109 said:
Hey,
(Sorry for my bad english I hope you can read it!)
Yesterday my aunt gives me her old htc Desire. I unlocked the bootloader with the tools from htcdev.com and install CWM over fastboot. I´ve tried to install some Roms, but they don´t run really. So I restore the backup from the stock Rom that I made with CWM. But now my phone is running very bad. Sometimes it boots, sometimes it crashed by the htc picture. Freeze there and after 10 - 20 Secound it reboot and freeze again.
What are my mistake? Do I need S-Off or is Bootloader Unlocked the same? What must I do that I can install Roms so that they run?
Thank you,
timia2109
Edit (some more Information):
hBoot : 1.03.003
Radio: 5.11.05.27
htc Desire LCD
Click to expand...
Click to collapse
You probably tried to install roms that need an ext partition, or you did not wipe before flashing a rom.

abaaaabbbb63 said:
You probably tried to install roms that need an ext partition, or you did not wipe before flashing a rom.
Click to expand...
Click to collapse
I want to install this (http://forum.xda-developers.com/showthread.php?t=1223996) Rom, I have a ext3 partition, and I've made a full wipe. I think the problem is in every Rom, I must do something wrong :/

What size is your partition, and how did you make it?

abaaaabbbb63 said:
What size is your partition, and how did you make it?
Click to expand...
Click to collapse
The ext3 partition is 1 GB big and I've done it with GParted as logical partition and it's the second partition.

I´ve successfull downgraded the hboot from 1.03 to 1.02 and now my phone dosn´t stay on. I see the lockscreen about 3 second than it crashed and turns off and try to boot again. The bottom of the phone get hot, but the battery is cold.
hope you can help me, thanks in advanced
Device Information:
S-On
2.3 Update by htc
hBoot : 1.02.003
Radio: 5.17.05.23
CID: VODAP102
htc Desire LCD
Click to expand...
Click to collapse

I'm on hboot 1.02.0001 and Revolutionary gives me error after "Zerging Root". :\

quimbexa said:
I'm on hboot 1.02.0001 and Revolutionary gives me error after "Zerging Root". :\
Click to expand...
Click to collapse
Is Zerging Root not a workstep?

Timia2109 said:
Is Zerging Root not a workstep?
Click to expand...
Click to collapse
It's the first thing Revolutionary does..

prblems with RUU
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.03.0003
(bootloader) version-baseband: 5.11.05.27
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: 2.35.0.0
(bootloader) serialno: SH0BLPL08243
(bootloader) imei:
(bootloader) product: bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3806mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 229eea55
(bootloader) hbootpreupdate: 11
all: Done!
No way dowgrade to 1.02- signature error. 5 diferent RUU, dosen't work. Unlock with htcdev.

Htc one x customer try to update now stuck on recovery menu

Hi guys I have htc one x stuck recovery menu here is the pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can some one tell me what rom I flash so I can make this phone working ?
Thanks
Sent from my iPhone using Tapatalk

You should give some more info:
- Do you always enter this menu, cause your volume down button could be pressed all time.
- The device shows relocked, did you install custom ROMs before?
- Before you want to flash custom ROMs you have to unlock and flash a custom recovery.

Unlock the bootloader first
Sent from my HTC One X using xda app-developers app

webpatrick said:
You should give some more info:
- Do you always enter this menu, cause your volume down button could be pressed all time.
- The device shows relocked, did you install custom ROMs before?
- Before you want to flash custom ROMs you have to unlock and flash a custom recovery.
Click to expand...
Click to collapse
Hi thanks for the reply no volume button on every time when i turn on i can see this menu
i did not flash with custom rom customer try to update the phone.
i just want to fix the problem i dont want to custom rom to put in side phone can i just flash with original rom? if yes what flash file i use
and how do i flash?
thanks for ur time

webpatrick said:
You should give some more info:
- Do you always enter this menu, cause your volume down button could be pressed all time.
- The device shows relocked, did you install custom ROMs before?
- Before you want to flash custom ROMs you have to unlock and flash a custom recovery.
Click to expand...
Click to collapse
Stefan0vic said:
Unlock the bootloader first
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
i just want to get correct rom ruu file. can u tell me what rom i flash so i can fix this phone?

Ok when I try to unlock the relics it giving me error saying unlock bootloader failed
When I do command on cmd
I can only bootloader info I can not see 2 info like show here
But my window show only bootloader info
What to do?
Can I just flash original firmware or do I have to u lock this first?
Sent from my iPhone using Tapatalk

Have you downloaded and installed the proper drivers for the PC?
Then on your PC open a command prompt in your fastboot folder connect the phone to the PC.
On your device you should see USB next to the red fastboot (in the first image you posted)
Now what does the command "fastboot getvar all" return (you enter that in the command prompt of your PC)?
You can copy paste it here, but mask your IMEI and Serial no.
IMPORTANT! Make sure your device has enouth battery. Your device is not charging in Fastboot, but you can use a script that does that, only takes a minimal half a day to charge (maybe more)
I added a zip with fastboot and a command file with the script (run it in fastboot, your device will be rebooting all the time, but in the time it reboots it will be charging a bit).

webpatrick said:
What does the command "fastboot getvar all" return?
You can copy paste it here, but mask your IMEI and Serial no.
Click to expand...
Click to collapse
what do u mean? u mean when i put the phone in to the fastboot mode? what is the fastboot getvar?
sorry i m new on this thats why i m asking

mps5566 said:
what do u mean? u mean when i put the phone in to the fastboot mode? what is the fastboot getvar?
sorry i m new on this thats why i m asking
Click to expand...
Click to collapse
Note: I edited my previous post
Fastboot mode is the mode you posted in the first image.
---------- Post added at 09:49 AM ---------- Previous post was at 09:43 AM ----------
If you are pretty new to this, read the sticky threads of this forums (about flashing) before doing anything, cause it's better to understand what you are doing before doing something stupid
You also said you don't want to install a custom ROM, but the device has been relocked, so probably you or someone already tried to install a custom ROM and thats where it went wrong.

webpatrick said:
Note: I edited my previous post
Fastboot mode is the mode you posted in the first image.
---------- Post added at 09:49 AM ---------- Previous post was at 09:43 AM ----------
If you are pretty new to this, read the sticky threads of this forums (about flashing) before doing anything, cause it's better to understand what you are doing before doing something stupid
You also said you don't want to install a custom ROM, but the device has been relocked, so probably you or someone already tried to install a custom ROM and thats where it went wrong.
Click to expand...
Click to collapse
Thanks for reply yes customer already try to update the phone n he lock the bootlader my question is
if i need to flash custom rom then i need to unlock bootlader? i need to flash with original file so do i still need to unlock it?
also i dont know what version flash file this phone had before how do i find that? cuz when i put in fast boot u can see i can not see the detail
and as i mention i m trying to unlock boot loader but i m keep getting same error.

mps5566 said:
Thanks for reply yes customer already try to update the phone n he lock the bootlader my question is
if i need to flash custom rom then i need to unlock bootlader? i need to flash with original file so do i still need to unlock it?
also i dont know what version flash file this phone had before how do i find that? cuz when i put in fast boot u can see i can not see the detail
and as i mention i m trying to unlock boot loader but i m keep getting same error.
Click to expand...
Click to collapse
If you want to flash it with an original RUU, your bootloader needs to be locked, and you need an original (stock) recovery.
For some devices it's hard to find a RUU so first we need to figure out which (region) the device is from and what is the base version. That can we do with the fastboot command:
Code:
fastboot getvar all
If we exucute this command we get all kind of system-info like CID, version-main, below you see my outut:
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.2
(bootloader) serialno: HT23TW***
(bootloader) imei: ***
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4134mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I will sent you a PM

Already solved - http://forum.xda-developers.com/showthread.php?t=2459969
Sent from my HTC One X using xda premium
---------- Post added at 12:36 PM ---------- Previous post was at 12:34 PM ----------
webpatrick said:
If you want to flash it with an original RUU, your bootloader needs to be locked, and you need an original (stock) recovery.
For some devices it's hard to find a RUU so first we need to figure out which (region) the device is from and what is the base version. That can we do with the fastboot command:
Code:
fastboot getvar all
If we exucute this command we get all kind of system-info like CID, version-main, below you see my outut:
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.401.2
(bootloader) serialno: HT23TW***
(bootloader) imei: ***
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4134mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I will sent you a PM
Click to expand...
Click to collapse
No need of relocking bootloader and cid and any other thing see this - http://forum.xda-developers.com/showthread.php?t=2459969
Sent from my HTC One X using xda premium
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
mps5566 said:
Hi guys I have htc one x stuck recovery menu here is the pic
View attachment 2281410
Can some one tell me what rom I flash so I can make this phone working ?
Thanks
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yesterday I got this problem but I fixed it see this- http://forum.xda-developers.com/showthread.php?t=2459969 and reply me if you are succesfull in reatoring your phone and unlock your bootloader first. Before doing the steps mentioned by me
Sent from my HTC One X using xda premium

kartik.kayz said:
Already solved - http://forum.xda-developers.com/showthread.php?t=2459969
Sent from my HTC One X using xda premium
---------- Post added at 12:36 PM ---------- Previous post was at 12:34 PM ----------
No need of relocking bootloader and cid and any other thing see this - http://forum.xda-developers.com/showthread.php?t=2459969
Sent from my HTC One X using xda premium
---------- Post added at 12:38 PM ---------- Previous post was at 12:36 PM ----------
Yesterday I got this problem but I fixed it see this- http://forum.xda-developers.com/showthread.php?t=2459969 and reply me if you are succesfull in reatoring your phone and unlock your bootloader first. Before doing the steps mentioned by me
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
If it is possible to go back via RUU then I would recommend it, but yes if it is not possible, you can choose a nandroid backup way (if you can find a nandroid for your CID and version-main).

He doesn't need a nandroid backup specifically for his CID. All wwe 4.18.401 nandroids work on his phone !!!
Only thing he must NOT do is relock the bootloader !
So basically it's down to this :
1: download any 4.18.401 nandroid backup
2: flash the recovery.img and boot.img from the nandroid backup folder
3: boot in the recovery and perform a good full wipe
4: restore the nandroid backup
5: flash back the stock recovery to be able to install official htc ota in the future
Here more info and back ups
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using XDA Premium 4 mobile app

webpatrick said:
If it is possible to go back via RUU then I would recommend it, but yes if it is not possible, you can choose a nandroid backup way (if you can find a nandroid for your CID and version-main).
Click to expand...
Click to collapse
thanks man u solve my problem thanks a lot for ur all help my htc one x working now

[Q] What is the safest way to gain S-off on HTC DHD?

Friends
I have a HTC Desire HD, with the following specs:
CyanogenMod 11-20140804-unofficial/M9-ace
Android 4.4.4
It has TWRP as recovery
SHIP S-ON RL
HBOOT-2-00-0029
RADIO-026.14.04.28_M
I want to install a new port from Mustaavalkoista, but before that I want to make my phone s-off.
But I am struggling doing that, so wanted to ask for some ideas how I can best proceed. I do not want my phone bricked.
Thanks for good suggestions,
Calle

Visit ace think tank thread.

marknoll said:
Visit ace think tank thread.
Click to expand...
Click to collapse
Thanks, marknoll. I looked at that thread and at the various options for getting s-off and it seems that it is not easily done.
I know how to install a updated ROM without having s-off so I just have to stick to that method then.
Thanks
Calle

S off is feasible.
---------- Post added at 01:06 PM ---------- Previous post was at 01:02 PM ----------
Run fastboot getvar all plz. Wanna see your specs

marknoll said:
S off is feasible.
---------- Post added at 01:06 PM ---------- Previous post was at 01:02 PM ----------
Run fastboot getvar all plz. Wanna see your specs
Click to expand...
Click to collapse
Here they are:
C:\android-sdk-windows\platform-tools>fastboot devices
HT226RX01480 fastboot
C:\android-sdk-windows\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: HT226RX01480
(bootloader) imei: 356357040337036
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4194mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.091s
C:\android-sdk-windows\platform-tools>
Hope it helps.
Thanks
Calle

Yes. Your bootloader needs to be downgraded to .0027
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Visit this thread. http://forum.xda-developers.com/showthread.php?t=2367322

I saw your convo with Scotty. Didn't that ever work out?

marknoll said:
I saw your convo with Scotty. Didn't that ever work out?
Click to expand...
Click to collapse
Sorry, I have forgotten what happened and it is a while ago.
Anyay here is my latest to your suggestion on that thread
:
Do you want me to run the script mentioned and forget about the latter part, the flashing of the current Phiber 2000?
It says I have to have:
- original ROM
Original boot image ( this is not the HBOOT)
original Recovery
Not sure if I have those?
It says I need a formatted card. I do, with data and a functioning Cyanogen installed. Will that script wipe it?
Sorry about all the questions.
Calle

Idk to be honest. I used the original aahk which ran the script for me. All I did was hit buttons.lol. try aahk2 again..or maybe search for the users glevitan ,bannagranola or gizmoe. They can help

marknoll said:
Idk to be honest. I used the original aahk which ran the script for me. All I did was hit buttons.lol. try aahk2 again..or maybe search for the users glevitan ,bannagranola or gizmoe. They can help
Click to expand...
Click to collapse
Thanks, friend
I do think I do not dear to try it as I do not have much spare time to fix things in case it goes wrong. I can live with the s-on for now.
Thanks anyway for your good suggestions.
Have a blessed Spring
Calle

I'm serious. Pm one of those guys. They won't mind . they have been very helpful to me over the years

What did u figure out?

marknoll said:
What did u figure out?
Click to expand...
Click to collapse
Hi Marknoll and thanks for your follow up. I appreciate that.
I wrote one of the guys you mentioned but have not heard back. I am not pursuing this actively but if someone gives me some good ideas I might still try them.
Thanks
Calle

Did you ever scope out the aahk2 thread yet?

Thanks
Yes, I did but I found it to be too risky to try, so I did not want to pursue it.
Calle

It isnt
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
I think your issue is making a gold card
---------- Post added at 01:55 PM ---------- Previous post was at 01:53 PM ----------
Check this out too. http://forum.xda-developers.com/showthread.php?t=2436481
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
Another user to contact would be cedarctic

Thanks for the suggestion.
I had already downloaded the Windroid Universal Android Toolkit but am not sure how to use it. I have wondered what the gold card is all about. They say on those pages that it can get s-off on HTC HD's but no-one really explains how to do it.
Anyway, I will not be able to do anything until later next week as I do not have the computer handy on which I have tried to get the HTC to have s-off.
Thanks
Calle

The tool kit works

Please help for my HTC One M8 update

I write here because i can't write to he's thread.
I installed the 6.0 rom for my HTC One M8 from graffixnyc, but has not sound and it write's driver error, unknown problem. What's the problem?
I have S-on, custom recovery (twrp) and unlock bootloader. Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Thanks for the help!
Sorry for my bad English, I'm Hungarian!

Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general

timbohobbs said:
Old firmware probably, you likely need to go back to stock and wait for all ota updates . BTW, this should be in q and a not general
Click to expand...
Click to collapse
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly, but i can use it from Hungary with my Hungary sim card.
I wanna try to upgrade once and the phone bricked and i install twrp and a stock rooted rom from android revolution hd.

You'll probably run into problems if your firmware is out of date. S off may get you out of a hole

peti439 said:
I can't back to stock because, not have original rom, firmware and ruu for this M8. It's a DE phone supposedly
Click to expand...
Click to collapse
By DE you mean Developer's Edition? But your top post says T-MOB101.
If you don't know what your version is, you'll never get an RUU to work.
You can restore to stock nandroid from the collection posted on these threads, but again you need to know your correct CID version.
Do fastboot getvar all, and post the output (be sure to delete IMEI and serial numbers, as these are personal info) and we may be able to determine your actual CID version.
---------- Post added at 02:31 PM ---------- Previous post was at 02:31 PM ----------
peti439 said:
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
You need s-off to change CID.

redpoint73 said:
By DE you mean Developer's Edition? But your top post says T-MOB101.
Click to expand...
Click to collapse
T-Mobile DE (Germany) - T-MOB101 - software version no. x.xx.111.x

ckpv5 said:
T-Mobile DE (Germany) - T-MOB001 - software version no. x.xx.111.x
Click to expand...
Click to collapse
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.

redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
Agreed ... a typo is corrected - should read T-MOB101

redpoint73 said:
Thanks! I thought that might be the case, but it was ambiguous. That's why its best for folks to be specific and detailed when asking for help!
To OP, still need getvar output to properly identify the right stock nandroid.
Click to expand...
Click to collapse
I go to my computer and make a picture for the cidnum number. Wait a little

Here's what i got. My Hboot is 3.19.0.0000 and the Radio is 1.25.214500021.06G ( I don't know this are need )
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.111.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxx
(bootloader) imei: xxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

peti439 said:
Here's what i got.
Click to expand...
Click to collapse
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
peti439 said:
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021
(bootloader) version-main: 4.19.111.2
Click to expand...
Click to collapse
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
peti439 said:
Plus the Hboot write's wrong image error.
I can't convert the cid to GOOGL_001, i have T-MOB101. That's the problem?
Click to expand...
Click to collapse
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.

redpoint73 said:
I clearly posted previously (Post #5 above) to delete your IMEI and serial numbers from getvar output. These are personal data what should never be posted online. Please delete these numbers for your own protection.
---------- Post added at 09:37 AM ---------- Previous post was at 09:33 AM ----------
The above info indicates that firmware shouldn't be an issue.
Did you do a full wipe (data, cache, Dalvik) when installing the GPE ROM?
Click to expand...
Click to collapse
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.

peti439 said:
I make a full wipe before install the rom ( i make a full wipe before install any rom ). I installed the rom, make the setup steps ( login, etc ) and I can't hear any sound. I make a reboot and I looked the driver error.
Click to expand...
Click to collapse
Try to flash again.
Did you read the ROM thread to see if others had this issue?

redpoint73 said:
Try to flash again.
Did you read the ROM thread to see if others had this issue?
Click to expand...
Click to collapse
I flashed the rom three times and doesn't work. I not see others have any issues.

---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
redpoint73 said:
It sounds like you are trying to do 2 different things:
- Flash the ROM zip in TWRP
- Flash the RUU (s-off required)
Which is it? You need to make up your mind, and understand the difference between the 2.
Click to expand...
Click to collapse
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?

peti439 said:
I try to flash the ruu with 0p6bdiag.zip in HBoot and try to flash the rom with twrp. That was the problem to writes the error in Hboot?
Click to expand...
Click to collapse
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
peti439 said:
I flashed the rom three times and doesn't work. I not see others have any issues.
Click to expand...
Click to collapse
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?

redpoint73 said:
"Wrong image" means you are trying to run an RUU that doesn't match your CID. You need s-off to change CID.
---------- Post added at 10:16 AM ---------- Previous post was at 10:15 AM ----------
Try downloading the ROM zip to eliminate the possibility that it was corrupted during download.
Did you cancel the option in TWRP to root the ROM, as directed in the ROM thread?
Click to expand...
Click to collapse
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.

peti439 said:
I canceled to root the rom because I tried to root the rom, i got bootloop everytime.
Click to expand...
Click to collapse
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?

redpoint73 said:
Which is expected, and clearly indicated in the ROM instructions.
But it sounds like at least on the latest flash attempts, you properly cancelled the root option.
I don't seen much reason for the bugs you are experiencing. Did you try to download the ROM again as previously suggested?
Click to expand...
Click to collapse
I downloaded two times. Once my computer and second time to my girlfriend laptop ( that was three days ago ) and doesn't work, the zip was not corrupted.

Htc One M8S stuck on Htc Logo.

My Htc stuck on HTC LOGO.. what can i do??
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1d456ef7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
all: Done!

@NAAS1,
have you now tested a Factory Reset in the Bootloader?
You know how you start into the bootloader?!
Best regards,
leather.face ...

leather.face said:
@NAAS1,
have you now tested a Factory Reset in the Bootloader?
You know how you start into the bootloader?!
Best regards,
leather.face ...
Click to expand...
Click to collapse
Yes i did but still this same. When customer came with this phone, was working(almost) it showed error every 15s, some application stopped working, and after few grs just hang on on HTC logo. I trying to find correct RUU for this phone but i dont know what is correct.I know how to boot to fast mode and i have skills to use prompt command in ADB console. Regards

NAAS1 said:
Yes i did but still this same. When customer came with this phone, was working(almost) it showed error every 15s, some application stopped working, and after few grs just hang on on HTC logo. I trying to find correct RUU for this phone but i dont know what is correct.I know how to boot to fast mode and i have skills to use prompt command in ADB console. Regards
Click to expand...
Click to collapse
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Sent from my htc_m8qlul using XDA Labs
---------- Post added at 08:39 PM ---------- Previous post was at 08:31 PM ----------
leather.face said:
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Click to expand...
Click to collapse
Edit: Sorry I was wrong with the RUU as .exe File. What for a RUU found you???
Sent from my htc_m8 using XDA Labs

leather.face said:
Have you found the RUU as signed Zip or .exe File?
When as .exe you must activate the USB-Debugging on your Phone.
You find this in Settings/Developer/ options.
Regards ...
Sent from my htc_m8qlul using XDA Labs
---------- Post added at 08:39 PM ---------- Previous post was at 08:31 PM ----------
Edit: Sorry I was wrong with the RUU as .exe File. What for a RUU found you???
Sent from my htc_m8 using XDA Labs
Click to expand...
Click to collapse
I found zip.file, but i dont know is correct or no.

NAAS1 said:
I found zip.file, but i dont know is correct or no.
Click to expand...
Click to collapse
Can you please share this RUU Link with me here?
THX! :good:
Kind regards,
leather.face ...
PS: You can a signed RUU.zip flash in the Bootloader but you must this Zip copy on your external microSD Card.

Don't forget to rename from:
rom.zip
to
0PKVIMG.zip
0 is zero!
Sent from my HTC One M8s using XDA-Developers mobile app

leather.face said:
Can you please share this RUU Link with me here?
THX! :good:
Kind regards,
leather.face ...
PS: You can a signed RUU.zip flash in the Bootloader but you must this Zip copy on your external microSD Card.
Click to expand...
Click to collapse
https://ruu.lalleman.net/HTC_M8S(QL...8_15.00_016_F_release_450409_combined_signed/

Chiko-HH said:
Don't forget to rename from:
rom.zip
to
0PKVIMG.zip
0 is zero!
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Should i do this from TWRP???

No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
Chiko-HH said:
No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Or read this carefully,this should be working
http://forum.xda-developers.com/showthread.php?t=3190238
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:43 PM ---------- Previous post was at 06:40 PM ----------
Chiko-HH said:
No,how so write Naas1. Form your SD Card
Sent from my HTC One M8s using XDA-Developers mobile app
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
Or read this carefully,this should be working
http://forum.xda-developers.com/showthread.php?t=3190238
Sent from my HTC One M8s using XDA-Developers mobile app
Click to expand...
Click to collapse
Begin from 1st Thread [emoji106]
Sent from my HTC One M8s using XDA-Developers mobile app

NAAS1 said:
https://ruu.lalleman.net/HTC_M8S(QL...8_15.00_016_F_release_450409_combined_signed/
Click to expand...
Click to collapse
Why you do not try to update via the bootloader?!
Rename the RUU.zip to 0PKVIMG.zip and when you have copy this Zip on your external microSD, you can Flash.
Okay I hope also that it is the correct RUU for your device but it does not work then contact the HTC Support.
I've done it in the past often and I was helped.
Sure NAAS1, when you have again questions then write here.
Best regards,
leather.face ...
Edit: @NAAS1, have you also on your device the correctly Stock recovery or the TWRP??? You need the Stock recovery for a Factory Reset in the Bootloader !

Thanx for help, i solved my problem flashing rom.zip in fastboot. I have to used Htc Fastboot.