hello ,
i installed in my phone some zip called ( imei_repair )
my imei was like this imei/01
but after this zip became NULL/NULL
and my phone Quickly became heated and the battery became so bad
also the phone became slow and and apps automatically close by itself
i tried to install another rom but the issue still.
please how to fix !
Sent from my GT_I9500 using XDA Free mobile app
You should probably go ask in your device forum for a couple of reasons.
1. Your device isn't supported by paranoid android.
2. It is a device specific problem.
3. It has nothing to do with our ROM.
4. You won't find many people in this forum section with that device because of reason 1.
#stayparanoid
Related
Hi all, many users have this issue and no solution was found up till now.
When you replace your Galaxy Grand Duos I9082 screen, most of replacement screens will cause a problem, making the phone enter SAFE MODE every time you start it. There is no possible way to fix it using button combinations, battery out/in again, power off/on, etc etc etc.
The problem of having the phone into SAFE MODE is that it only shows system apps, not downloaded ones.
That is really annoying !!
I am requesting help with two possible solutions:
Solution Request 1:
I assume SAFE MODE functionality could be disabled by someone with ROM programming knowledge. This would be of much help for all the users having the same issue than me.
Solution Request 2:
I have rooted my phone and as part of the process, the SuperSU app was installed and is now showing on my device.
Is there a way to set other apps as SYSTEM APPS? (remember I can't install any apk from market or any other place.
I am trying to install apk's directly from RECOVERY MODE (like SuperSU) but couldn't find a way up till now.
I tried to rename Whatsapp.apk to .zip and tried to install it from SD card in RECOVERY MODE but I get a Signature error.
Any help on this?
Thanks all for the help !!!!
Gerardo
31-03-2014 UPDATE: Finally, I flashed a new ROM and this FIXED the issue of the SAFE MODE !!
I used @k2wl firmware: http://forum.xda-developers.com/showthread.php?t=2279005
Even though, I am now having issue to enable 3G but it works fine in 2G (when enabling 3G, the operator signal comes in and out continuously).
glovagnini said:
Hi all, many users have this issue and no solution was found up till now.
When you replace your Galaxy Grand Duos I9082 screen, most of replacement screens will cause a problem, making the phone enter SAFE MODE every time you start it. There is no possible way to fix it using button combinations, battery out/in again, power off/on, etc etc etc.
The problem of having the phone into SAFE MODE is that it only shows system apps, not downloaded ones.
That is really annoying !!
I am requesting help with two possible solutions:
Solution Request 1:
I assume SAFE MODE functionality could be disabled by someone with ROM programming knowledge. This would be of much help for all the users having the same issue than me.
Solution Request 2:
I have rooted my phone and as part of the process, the SuperSU app was installed and is now showing on my device.
Is there a way to set other apps as SYSTEM APPS? (remember I can't install any apk from market or any other place.
I am trying to install apk's directly from RECOVERY MODE (like SuperSU) but couldn't find a way up till now.
I tried to rename Whatsapp.apk to .zip and tried to install it from SD card in RECOVERY MODE but I get a Signature error.
Any help on this?
Thanks all for the help !!!!
Gerardo
Click to expand...
Click to collapse
Its happening coz something is causing problem in u r mobile in normal mode so for safety its booting in SAFE MODE...Uninstall some apps which is not working properly or causing a conflict with normal operation and see if it works format u r external SD card...
If that doesnt work try to flash a ROM and see.. U can't just change the extension and make it a flashable zip..There are procedured to make a app has CWM flashable directly if u do it u will get signature error has u r getting..
Try pushing apps apk into system through ADB. But this is only a temporary measure and you will soon run out of space
Sent from my GT-I9082 using xda app-developers app
Solution found at last
Solution is here
So don't worry guys anymore
It's not a big deal as some of you guys say
I had my touch replaced n had the same trouble
I simply switched it off n interchange both sims with each other (means put sim 1 into the slot of sim 2 n vice versa.)
It became OK
U can also try removing Sim 1 n letting the slot empty n using only sim2 in its slot
hi friends
--- i have htc 816w. After unlocking and rooting two months, my touch started not work well. it sometimes doest work, sometimes writes by itself, and sometimes open windows by itself. Because of this problem;
---- i installed some custom roms like "cm-12-20150505-NIGHTLY-a5.zip" and "mokee" and on my mobile. i didnt like them. there were some problems. i want to restore old rom but, i tried reset and everything but i couldnt go back to android 4.4.4.
*my mobile is now "cm-12-20150505-NIGHTLY-a5"
*and android is 5.0.2 .
----????my question: how can i install roms in page
"http://www.htcdev.com/devcenter/downloads"
i want to install this rom. it is 4.4.4
a51dtul-3.10.28-g090104e.zip
can i do it with fastboot or flashing commands on pc ???????
please step bye step
osmanoca said:
hi friends
--- i have htc 816w. After unlocking and rooting two months, my touch started not work well. it sometimes doest work, sometimes writes by itself, and sometimes open windows by itself. Because of this problem;
---- i installed some custom roms like "cm-12-20150505-NIGHTLY-a5.zip" and "mokee" and on my mobile. i didnt like them. there were some problems. i want to restore old rom but, i tried reset and everything but i couldnt go back to android 4.4.4.
*my mobile is now "cm-12-20150505-NIGHTLY-a5"
*and android is 5.0.2 .
----????my question: how can i install roms in page
"http://www.htcdev.com/devcenter/downloads"
i want to install this rom. it is 4.4.4
a51dtul-3.10.28-g090104e.zip
can i do it with fastboot or flashing commands on pc ???????
please step bye step
Click to expand...
Click to collapse
That is not rom but source code and You can't install that. Also watch out for models as You was represent that Your model is 816 (A5) and You was anyway look at sources of A51DTUL!
Need desperate help with a MediaTek clone of S4
Hi everyone,
I will try and keep it short but last night I was badly scammed by a wonderful specimen of the human race, who wanted to sell his old Samsung S4. Turns out:
1. Its a mediatek clone
2. It has more issues than anticipated but all buttons work.
3. Seem to be soft bricked
Now I am facing nothing but patience to try and fix it. What works:
1. All buttons seem functional.
2. The phone boots into normal mode where I have only empty screen with a Phone app. The Phone app opens I can enter digits but cannot dial.
3. I can reboot into Factory mode - I performed all the tests of the device and all were a PASS. I heard the sounds, checked the cam, everything seems to be perfectly working. Touch scree, camera, sound etc. Even noticed it had FM.
I tried booting in Download Mode - no success. I get the dead Android image and it just hangs there. I can easy reboot though.
My PC recognizes the device and opens a media (empty) device folder.
I tried thus far to use SP Flash but....I dont know how to. Nothing is happening.
Of course I spent 6 hours waiting on different stock ROMs for S4 before realizing its a MediaTek device.
And now, here I am desperately asking if anyone could help me, if there is a chance to remedy that situation of mine. I dont need the phone to do anything special. The closer it is to a Samsung Android ROM - awesome. If its other, I dont mind at all. So long as it works and has access to Google Play Store.
Thank you geniuses and wonderful people for any hint you might have.
Hi
I had a similar issue couple of yrs ago with an S3 clone.
First thing u need to knw is the mtk version, memory details (RAM & ROM) and screen resolution to find a suitable OS version.
If ur lucky, ull get the stock ROM from the manufacturer on Google or else ull hafta search on xda, needrom, or the Chinese forums. Most of such devices don't have a lot of development so ull hafta port ROMs so a custom recovery will b helpful
Hope these points help
Sent from my YU5510 using Tapatalk
Ok.
So I need:
Device RAM
Device ROM
Mtk Version
I think I can extract these from the Factory Mode. Will check.
Then I need to get the stock ROM (hopefully) or search for a custom ROM. (Manufacturer I suppose we talk about MediaTek and not Samsung?)
Custom Recovery - yeah, usually this is the first thing I install but how do I do this on a cloned mtk? I suppose ODIN wont work. Can you lastly point me to a link or name of software to use instead of ODIN? (or will it work with ODIN?)
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Kryspus said:
Hello,
I haven't found in this big repository which is XDA any good ROM for HTC desire 620 (single sim), but i found it in other place in internet and i decide to share with you guys. This forum is missing special section for phone HTC desire 620 and i have to write it here in general "desire" section and becouse of "To prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!" I'm force to write this thread in General Secion. I hope there is not big deal with this and moderator will not delete it rather moving it to right section and let the others desire 620 users take benefits of such good ROM from CM.
The source of the rom is taken from: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
and i add some my coments to it.
cm-12.1-20160106-UNOFFICIAL-a31ul.zip
GAPPS
ARM -> 5.1 -> "choose"
Personaly recomend "pico" you can always install other google apps from google play store
TWRP
twrp 3.2.0-0 newest version work for meRoot SuperSUDownloand Zip file. Latest(V2.82) version work for me.
STEPS:
1. Unlock your Bootloader.
Register on site https://www.htcdev.com/bootloader/and simply follow the steps
2. Install TWRP.
https://www.xda-developers.com/how-to-install-twrp/
3. Do backup of your current system via TWRP.
4. Do wipe/factory reset
5. Install ROM.
6. Install gapps.
7. Install SuperSU.
8. Restart phone and enjoy! :highfive:
Bugs foud so far by me, to confirm:
- display percent of battery in battery icon on bar is not working
display percent of battery next to icon or hide percent is work fine.
Edit: Now it's working. I think it's after install Theme for CM12 from Play Store.
- Flash light and Torch dont work when battery is low and there is no information about it.
Click to expand...
Click to collapse
i am trying to find a rom for the HTC desire 620 right now as i have just got one to keep me going till i get an upgrade in a few months.... Is there any others you know of?
Problem with CM 12.1 for HTC Desire 620
Please guys I just successfully flashed CM 12.1 on my HTC Desire 620 it worked well at first but after i downloaded some apps from play store, my device just blacked out and started showing CM boot animation for several minutes, then it showed android is starting optimising apps after optimising, I thought the device will boot but it went back to the CM boot animation and that is how it has been doing. I have used TWRP to do a wipe now everything is normal but if I download or install an app the problem starts again. Please I need your help
I have a htc desire 620g dual sim, whats this custom rom support this phone ?
Lost IMEI after factory resetting and flashing a ROM (rooted) ! HTC DESIRE 620g dual
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Where did you find CM 13
Solution for invalid imei on Htc desire 620
If your device is custom rom and showing invalid imei ,then firstly flash stock rom on your htc desire 620 with flash tool in PC. Then note down your imei no.(printed on back of your phone). Root your mobile with kingroot.apk. Install chamlephon on your device. Then type your imei manually on that application.then restart.your imei will be repaired.
If you want to install custom roms then firstly install Mobile uncle tool and select backup and restore IMEI then backup the imei to extsdcard. Then flash your custom rom. And if its showing imei error then root with kingroot.apk and install mobileuncle tool.apk,then select restore imei from extsdcard then reboot.IMEI will surely get soluted. Hit helpfull if you like this thread.
Hi,GPS is working ?
subinsunil said:
Can someone help me with this problem?
I have tried all the methods to repair the IMEI, but none of them worked. Even I tried flashing a new ROM (CM13) and now I cant even enter the ENGINEERING MODE , says that engineeringmode.apk is not installed. But even though I have accessed engineering mode in a different rom, the CDS info option was not highlighted to be clicked on and I couldn't fix it.
Please someone help me with this problem
Click to expand...
Click to collapse
Try fix from attachment. Found it here: https://forum.xda-developers.com/showpost.php?p=74842530&postcount=464
is there some newer android version ? lineage port ?
can you guys share the link of this rom? It asks for access from this link. but I can't reach the producer
Hello, I need the rom file. Can you grant access? Or can you upload it to a different link?
@Kryspus
Greetings
I got a notification that there is an update to one ui 5 _ android 13 available. i connected the phone to the charger, started update and went to sleep (since the internet speed is slow here and takes a long time to download the data). after i woke up, i faced a bootloop on my phone.
i cleared the cache and repaired apps in recovery menu (based on a guide on some website), but it didn't help. what should i do?
* my phone doesn't have a warranty anymore.
First wait for an hour if it boots up if not wipe all the data
Oh my, I just faced the exact same problem WITH the exact same phone! :')
Don't bother with technicians, tried with two and they both said wiping data was the only way. I was thinking of trying with the Samsung Support Center but eh, they're closed tomorrow (italian holiday lmao)
Anyways, I believe doing a hard reset would resolve everything, but I'm assuming you don't want to..
I got a whole lot of help in here, if you want to check!
https://forum.xda-developers.com/t/...p-after-device-is-stuck-on-boot-loop.4536965/
Let me know if you're able to do something!
Alslamalikom (Peace be upon you) .. I hope you are well.... I had the same problem, in samsung a22 4g after updating Android 13, it only turned on the Samsung logo, then it restart.. Bootloop
I just subscribed.. to warn you so that no one will make same mistake .. My storage size is 128 GB and it is full of family personal and for me, and it was not possible to format it so as not to lose it.. Also, the mobile was under warranty, and I did not want to go to the agency, because they would say format or they would be able to open it, and it contains special family things
So I used Odin and the ROM version a225fxxu3cvk3 and another object such as bootloader and others, and the download began, and all my hope is to open The device does not delete anything
Thank Allah , in any case, the device was opened, but an automatic format was made for the device and everything was lost as if it was new... So I liked that no one did and lost his data as me🥹
And as kind member here called (nanawa) said, try when an update comes out, not the same ROM or Older than on the mobile phone
But everyone who installs the ROM is at her/his own risk
I will put it here and 2 another topics related to the problem and i will leave
Best wishes,, alslamalikom
Muslim for Allah said:
Alslamalikom (Peace be upon you) .. I hope you are well.... I had the same problem, in samsung a22 4g after updating Android 13, it only turned on the Samsung logo, then it restart.. Bootloop
I just subscribed.. to warn you so that no one will make same mistake .. My storage size is 128 GB and it is full of family personal and for me, and it was not possible to format it so as not to lose it.. Also, the mobile was under warranty, and I did not want to go to the agency, because they would say format or they would be able to open it, and it contains special family things
So I used Odin and the ROM version a225fxxu3cvk3 and another object such as bootloader and others, and the download began, and all my hope is to open The device does not delete anything
Thank Allah , in any case, the device was opened, but an automatic format was made for the device and everything was lost as if it was new... So I liked that no one did and lost his data as me🥹
And as kind member here called (nanawa) said, try when an update comes out, not the same ROM or Older than on the mobile phone
But everyone who installs the ROM is at her/his own risk
I will put it here and 2 another topics related to the problem and i will leave
Best wishes,, alslamalikom
Click to expand...
Click to collapse
Wa ʿalaykumu s-salam, i want to ask a question, was the device bootloader unlocked with the important data or was it locked?