Develop Bugs

TCL P600 / Alcatel One Touch Snap 7025D Root and GAPPS

Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.

I tried what you say but no thing happened .
I have alcatel one touch snap

Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?

internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega

Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day

I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk

hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english

weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported

Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:

Hi all.
Is possible to port or create any custom rom for this device?
Thanks

Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.

root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper

angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...

please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.

I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.

Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????

EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards

jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.

EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?

jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.

Error insert sim card sony xperia m cm11

Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]

What CM11 build are you using? The ones from FXP or the official?

I'm currently experiencing a similar problem. I've installed ZnxtEvolution, and it lags a LOT. I tried installing 6 other ROMs, including CM11 (official). All of them worked, but didn't read my SIM. Please help; I'm sick of this ROM.
PS: I'm guessing there's a kind of zip file to flash, or something..? idk :\

niks2014 said:
Please help me i'm new to this forum as well as new to rooting and custom rom for mobiles.
I don't know to use forums but anyone can help me please...
I installed CM11 Rom and Gapps and my phone sony xperia m booted correctly but how to enable sim card.
its said at begining sometime about sim card and when i went to enable data it says insert sim card.
now what top do please tell me>....
Do i need to install builds , any terminal commands or anything pls suggest me with text , videos or photos.
Very Urgent plssssssssssssssssss.
email at - [email protected]
or at
[email protected]
Click to expand...
Click to collapse
Hey there,
I think I understood what you have told and I have few questions to ask,
First were you on stock 4.3 before flashing?
Second did u wipe cache,data,dalvik and format /system before flashing?
After u installed did u check the Sim subscription it asks after 1st bootup .if not go to settings and do it.
See I am no expert , just a beginner like you are.so hope this helps. Thanks

I don't know how to enable sim from settings.
elmkzgirxp said:
What CM11 build are you using? The ones from FXP or the official?
Click to expand...
Click to collapse
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.

niks2014 said:
I flashed cm11 after 4,3 xperia m auto upgrade only.
I don't know which cm11 build i flashed it, but at startup of my mobile i was at wifi setting that time some sim message flash but i went away as i touched the wifi screen option by mistake.
can you or anyone else provide me with working sim cm11 build over here or in pm
and also the way to configure sim from settings if not at startup.
Actually after this my mobile undergone a shot circuit itself so needs a repair so can any one estimate what is the cost of repair of such issue, my estimate was 800rs/ 80EUROS as per some website.
Click to expand...
Click to collapse
I don't really know how much repairs cost, but after the repair, I suggest you do this:
GOING BACK TO STOCK ROM
1. Backup everything you need (messages, contacts).
2. Download a 15.4.A.1.9 firmware (FTF) in here or here, your choice.
3. Download and install Flashtool from here.
4. Place the downloaded firmware to the C:\Flashtool\firmware, or wherever you put your Flashtool installation, as long as it is in "firmware" folder. (Make sure the file you downloaded is in .ftf (file extension), if not and it is in .zip or .rar, then extract it first.)
5. Open Flashtool.
6. Power off your device. (Prepare your USB cord.)
7. Connect your USB cord to your PC FIRST, then hold the volume - down while connecting it to the other end of the cord. (The phone's LED will light up into green (it means it is in flash mode).)
8. Click the lightning button and select Flashmode.
9. Pick the firmware you downloaded earlier, then click Flash. (MAKE SURE there is no option of "TA" in the list on the right side. If you ever find one, uncheck it.)
10. After flashing, remove your phone from your PC, then power it on. (The first boot normally takes longer.)
11. Set-up everything after the boot.
FLASHING CM11
1. Download a custom recovery and flash it. (I'll assume you already know this one.)
2. Download the latest official nightly build from here.
3. After the download, put it in your preferred storage in your phone.
4. Boot into the custom recovery and wipe /data and /cache.
5. Flash the downloaded CM11 ROM.
6. Reboot into system. (Again, the first boot takes longer.)
That's pretty much it. I hope it helps!

i got this too after flashing fxp343, never happen before now back to stock 4.3 again :/

[Q&A] [ROM][5.1] Candy 5 - Hercules [ALPHA]

Q&A for [ROM][5.1] Candy 5 - Hercules [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1] Candy 5 - Hercules [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...

chjcken12 said:
hello there,
Has anyone tried to take a picture with flash on?
i'm using candy 5.0 and anh my phone will reboot immediately when ever i take picture with flash on...
Click to expand...
Click to collapse
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.

OK, I installed the last version (5.1.1 from 20150422) and everything seems to be working, at first boot I had no signal at all so I restarted my phone... and no signal.
Rebooted to recovery and installed Zero Gapps from slim, reboot system, no signal
The I attempted to add my google account and after conecting my phone to the wifi it got signal, went to APN config and my companies APN is there, Data seems to work OK, phone and messages works as well
Connect my phone to wifi seems to solve the problem
Thanks Dan!

NoSpamDan said:
You are the first to report this issue.
The latest is Candy5 v2.1.0 in Post #2 (Android 5.1.1). Try the latest and clean flash. If it still does this, I need logcat logs showing the problem if I'm going to have any chance at fixing it. Paste a log on Pastebin.com and link it back here.
Click to expand...
Click to collapse
thanks for always support your user
i tried a third-party camera app, and that camera app work fine with flash on, while stock camera still has that problem,
now i will try to update to candy 5.1

data not working.
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2

same here dont have wifi
same here dont have wifi

hillinsf said:
I like the rom but data not stable. I did a clean install. If wifi turned off I lose mobile. but am looking forward to this rom i love my s2
Click to expand...
Click to collapse
mickeymichael said:
same here dont have wifi
Click to expand...
Click to collapse
This is an issue affecting many devices on LP5.1. I believe it is upstream and will get fixed in due time...

hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say

USB ?
I did clean install with new build , the data is much better but... when i try to enable usb it wont give me a menu when i enable it in developer then go to storage and press the settings it shows usb connection and i click it and no menu , the rom is great but really need the usb to work for daily driver , almost there

chjcken12 said:
hello NoSpam Dan
i connect my phone to PC and choose Mass storage but only my 2GB SD card showed up in My computer window, neither internal storage!
Can you guide me to make the internal storage connect to my PC?
sorry for my bad english, hope you understand what i say
Click to expand...
Click to collapse
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.

NoSpamDan said:
Can you mount storage in recovery mode?
Check your Device Manager carefully for Nexus or ADB devices (if you're on Windows). If you find something like this, try to change it to a USB Storage Device.
Click to expand...
Click to collapse
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue

chjcken12 said:
i cant find anything like you said, it just an Android CompositeADB Interface i installed recently for android app debugging..
can you tell me more detail about this issue
Click to expand...
Click to collapse
Sometimes you can right click that ADB interface and choose "Update driver". Then select manual and choose USB Mass Storage Device.
Depends on the drivers you are using. I haven't changed the connection methods, but that doesn't mean they haven't changed somewhere in the upstream code...

Nice rom but vibrating and does not turn on after restart
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed

Zubair66 said:
I installed in on cwm 6.0.2 and worked eith bugless and smooth i inserted sim it asked to restart and i restart and then it turn on at samsung and then vibrates every second then reboots every time.I don't think that at time of restart my battery was only 10% at the time of restart.Help me for any answer but tried to enter cwm but failed power on key gets automatically pressed
Click to expand...
Click to collapse
You seem to have a stuck power button. @vincom has a 1-Stop sticky thread that is linked in my signature. Although that's for the Skyrocket, you might find some of it useful for the Hercules as well.

Does not turn on on vibrates and auto restart
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts

Zubair66 said:
Rom successfully installed and eorks later i put sim and restart and phone .It turn on automatically and after samsung logo it starts vibrating continously then restart but when i tries to enter recovery mode it automatically restarts
Click to expand...
Click to collapse
You need to give more details please.
- What recovery are you using?
- What GApps package?
- Did you repartition your device?
Full wipe, and try flashing only the ROM, without restoring any backup data, and see how it goes.
Or as I said, stuck power button.

how to root galaxy s2 t mobile version running on candy 5.1 lollipop
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it

desmond4life said:
i lost my root access after i installed lollipop 5.1 custom rom. pls how do i reroot it
Click to expand...
Click to collapse
This ROM? Root is built in.
Try a full wipe and reflashing.

MY galaxy s2 t mobile version not charging after flashing candy 5 rom
i was running android 4.0.4ics stock and it was charging fine, but recently i flashed candy5 custom rom and my galaxy s2 is now on android 5.1 lollipop, but i noticed that my phone is no longer charging. once i plug in my charger, it will display charging for some few seconds and then it will stop and remain that way. even when i switch off, and then plug the charger, the battery icon will be counting without actualy charging. but if i restore my android 4.0 stock backup, it will be charging fine. pls i need help.

MediaTek S4 Clone: Soft Bricked With Working Buttons

Need desperate help with a MediaTek clone of S4
Hi everyone,
I will try and keep it short but last night I was badly scammed by a wonderful specimen of the human race, who wanted to sell his old Samsung S4. Turns out:
1. Its a mediatek clone
2. It has more issues than anticipated but all buttons work.
3. Seem to be soft bricked
Now I am facing nothing but patience to try and fix it. What works:
1. All buttons seem functional.
2. The phone boots into normal mode where I have only empty screen with a Phone app. The Phone app opens I can enter digits but cannot dial.
3. I can reboot into Factory mode - I performed all the tests of the device and all were a PASS. I heard the sounds, checked the cam, everything seems to be perfectly working. Touch scree, camera, sound etc. Even noticed it had FM.
I tried booting in Download Mode - no success. I get the dead Android image and it just hangs there. I can easy reboot though.
My PC recognizes the device and opens a media (empty) device folder.
I tried thus far to use SP Flash but....I dont know how to. Nothing is happening.
Of course I spent 6 hours waiting on different stock ROMs for S4 before realizing its a MediaTek device.
And now, here I am desperately asking if anyone could help me, if there is a chance to remedy that situation of mine. I dont need the phone to do anything special. The closer it is to a Samsung Android ROM - awesome. If its other, I dont mind at all. So long as it works and has access to Google Play Store.
Thank you geniuses and wonderful people for any hint you might have.

Hi
I had a similar issue couple of yrs ago with an S3 clone.
First thing u need to knw is the mtk version, memory details (RAM & ROM) and screen resolution to find a suitable OS version.
If ur lucky, ull get the stock ROM from the manufacturer on Google or else ull hafta search on xda, needrom, or the Chinese forums. Most of such devices don't have a lot of development so ull hafta port ROMs so a custom recovery will b helpful
Hope these points help
Sent from my YU5510 using Tapatalk

Ok.
So I need:
Device RAM
Device ROM
Mtk Version
I think I can extract these from the Factory Mode. Will check.
Then I need to get the stock ROM (hopefully) or search for a custom ROM. (Manufacturer I suppose we talk about MediaTek and not Samsung?)
Custom Recovery - yeah, usually this is the first thing I install but how do I do this on a cloned mtk? I suppose ODIN wont work. Can you lastly point me to a link or name of software to use instead of ODIN? (or will it work with ODIN?)

LG G4S / Beat / H735, can't find the ROM anywhere.

Hello all.
I've recently bought this LG-H735 and it runs Marshmallow. Only now I've discovered the issues with its internal memory so I'd like to root in order to use my SD card as default space to install apps.
Problem is, after a bit of search I used Kingroot and it seem to do the trick... until I restarted the phone and it soft-bricked into the usual bootloop. Can access the download mode but it gets stuck at 0% for hours.
Next step would be to flash but I've been searching everywhere on the web and I can't find the ROM. All links are either down, lost or just plain broken. I'd need the PRT version if I'm geting this right, thats what my phone box shows at least.
I was wondering if anyone could point me in the right way.
Any tips would be apreciated, still new to all this. Thanks in advance.

Also... a little question update if I may. Anyone recomend a nice custom ROM for this phone? Unfortunatly Cyanogen is not compatible it seems.
Thanks again.

rk56 said:
Hello all.
I've recently bought this LG-H735 and it runs Marshmallow. Only now I've discovered the issues with its internal memory so I'd like to root in order to use my SD card as default space to install apps.
Problem is, after a bit of search I used Kingroot and it seem to do the trick... until I restarted the phone and it soft-bricked into the usual bootloop. Can access the download mode but it gets stuck at 0% for hours.
Next step would be to flash but I've been searching everywhere on the web and I can't find the ROM. All links are either down, lost or just plain broken. I'd need the PRT version if I'm geting this right, thats what my phone box shows at least.
I was wondering if anyone could point me in the right way.
Any tips would be apreciated, still new to all this. Thanks in advance.
Click to expand...
Click to collapse
First off all ****! Look at this : http://forum.xda-developers.com/general/general/kingo-root-steals-imei-t3268525
and for the custom rom there is a just stock rom and how to root.
HOW TO ROOT /W out KINGOROOT (because steals imei) : http://forum.xda-developers.com/g4/general/lg-g4s-world-root-lg-devices-t3231759
HOW TO UNBRICK: : http://guidebelajar.blogspot.com.tr/2015/11/guide-to-flash-bricked-bootloop-lg-g4-beat-g4s.html

if i install twrp no-troot h735 then flash magisk to phone it will be rooted?