He and a few days the problem and started connecting the phone with charger original and I will show the message that is loading in usb. then loads very slowly. I tell you that I have two original chargers lg g3. but if I connect it with the charger s5 charge well. Then I did the tests on the TV and radio by connecting usb .but mon makes me the chance to choose the mode of connection. will be four days I noticed these problems.
Related
Well suddenly I couldn't charge my device, I switched chargers, switched the cables, tried connecting to the PC (with different cables) my old VOX does fine with all the connections too... so I guess something broke internally.
Don't suppose anyone else has had these problems?
Check out the option..
... under settings... power, there is an option to not charge device when connected to a pc while power is on. I cant begin to imagine why its there, but it is, and it causes the symptoms u describe...
g
Sometimes my phone will not charge when connected to the wall or my computer. The problem usually goes away on it's own, but when I need to charge I generally need to charge.
Sometimes I cannot access my phone via USB on PC either.
Only with data to and from the computer. No charging issues at all.
I've never had issues when plugged in to computer (USB). I frequently have issues when plugging into wall charger, but I think I have a bad cable. Phone will recognize charger connect, sit for a second, and lose the connection. Charging stops while cable is in. I bought a cheap cable on-line for the wall charger. I guess you get what you pay for....!
I have issues with usb connnect to computer since flashing cm6 8/13 nightly. Will not charge or mount usb.
Restoring back to 8/11 seems to fix issue but can't seem to get any newer nightlys to work or rc2.
Sent from my PC36100 using XDA App
michaelvibe said:
Sometimes my phone will not charge when connected to the wall or my computer. The problem usually goes away on it's own, but when I need to charge I generally need to charge.
Sometimes I cannot access my phone via USB on PC either.
Click to expand...
Click to collapse
Kind of sounds like a loose connector. I bought some micro USB cables from monoprice and the size of the connector was just a tad smaller than the plug for the phone. So if the cable wasn't plugged in and propped up in a certain way, the phone wouldn't charge. I just bought some new cables from monoprice (the ferite core ones) and problem solved.
I guess when this happens to you, wiggle the cable a little and then hold it for a few seconds at a certain angle and see if it starts charging... if it does then you know you need a new cable.
I was having similar issues and with my sd card permission issues I simply uninstalled my usb drivers and my removable disc drivers for the phone on the computer I think there was like 3 sets and haven't had an issue since.
I have noticed that the note 2 sometimes considers AC Adapter as USB.
Thus the charging output reduces.
Is someone else also facing the same issue? Is there a solution?
Nope, it won't act as USB. Basically AC only connect to + and -. And the data is left blank.
Out USB port in PC has 3 connected
Accidentally sent from my Samsung Galaxy Note 2
For me it does acts as USB sometimes.
I plugged the phone to USB port and then again to AC adapter.
The phone this time recognised the AC adapter and the charging output increased.
How are you measuring the charging output?
It happened to me once. Fixed it by unplugging then restarting the phone then it showed it as AC when I plugged it again. Don't know how it happens, but it seems a rare occurrence (for me at least).
i also feel that is why sometimes it keep charging slowly...anything to do with usb debugging enabled?
Hey there, two of my micro USB cables just died in a week. I've been using my Samsung cable for like 2 or 3 years without any problem with my Galaxy.
Then I got this Chinaphone and two of my cables died in a week. The Samsung one isn't even charging the phone, it's completely dead. The one that came with the phone is now only charging the phone, but not connecting it to PC. Both cables worked fine for few days, charging and connecting it to a PC.
Not even going to recovery and mounting USB storage is being recognized by the PC.
Is there a possibility that my phone is killing them or what? What should I do?
Edit: Now even the second cable is completely dead.
Hy guys. I am trying to make a dashboard install, and eveything went well ( I did the battery mod, installed the Timur's Kernel). All worked good, the tablet went to sleep when i stopped supplying power to the OTG Y cable (only stopped the power, NOT unpluging the OTG cable from the tablet). When I wanted to clean the setup, I once again powered the tablet and expected to shut down when the power was no longer provided, but surprize, it showed that it was still powered, and it kept showing that until I unpluged the OTG cable.
I started a hardware debug, checked the voltages, checked the cables etc. I tryed with a normal usb cable, that one worked ok (the charging status changed to not charging, the tablet stayed awake because it is not an OTG cable, and Timur's kernel needs a OTG cable for the FI function to be enabled). Then I tryed connecting the powered OTG cable, remove the power (still showing that the battery was charging), and then cut the ground wire that goes to pin 4 (SENSE), which made the tablet think it was not charging anymore.
Have any of you encountered this issue before? Have you found any solutions? I am going crazy here.