Tablet bricked after update (picassowifi) [SM-T520] - Galaxy Tab Pro 12.2, 10.1, 8.4 Q&A, Help & Trouble

I'm running CyanogenMod 11.0 Official Nightlies for the Tab Pro 10.1 Wifi (picassowifi) [SM-T520] for over 2 months now, very happy with it.
Today I woke op and saw my tablet powered off, yesterday everything worked fine. I booted the tablet and I get a popup message updating and after a few seconds it reboots. After it being turned off again it never powered up again. I tried to plug it in the charger and it also doesn't boot in charge mode.
Did my tablet trash it selves? Anyway to fix this?

freva said:
I'm running CyanogenMod 11.0 Official Nightlies for the Tab Pro 10.1 Wifi (picassowifi) [SM-T520] for over 2 months now, very happy with it.
Today I woke op and saw my tablet powered off, yesterday everything worked fine. I booted the tablet and I get a popup message updating and after a few seconds it reboots. After it being turned off again it never powered up again. I tried to plug it in the charger and it also doesn't boot in charge mode.
Did my tablet trash it selves? Anyway to fix this?
Click to expand...
Click to collapse
Do a full wipe in Recovery.

Related

[help][CM11] Charging problem.. need help

Hi, I've installed latest cm nighly over modified 4.3, wiped everything. But every time i connect my phone to charger and turn of the screen after few minutes the led turn off and phone is discharging until i turn it on again. Is there a fix or somebody with a same problem?
Here is screenshot a took this morning, phone was on charger all night with screen off.
MSGR said:
Hi, I've installed latest cm nighly over modified 4.3, wiped everything. But every time i connect my phone to charger and turn of the screen after few minutes the led turn off and phone is discharging until i turn it on again. Is there a fix or somebody with a same problem?
Here is screenshot a took this morning, phone was on charger all night with screen off.
Click to expand...
Click to collapse
Flash the latest cm11,with updated Kernel/
Farsiris said:
Flash the latest cm11,with updated Kernel/
Click to expand...
Click to collapse
I said that i flashed the latest cm11.. I tried three latest nightlies but still the same

[Q] Galaxy Tab 3 Update Problem

I have been prompted to update a Samsung Tab 3 10.1 so pressed update and now it restarts says it updates as far as 100 percent and then switches off. If I then switch it back on then it says updating again. I also can not get to the recovery. Can anyone help?
Details - When you switch it on it says updating again, could you describe the screen you speak of/post pictures if possible?
Have you tried removing the battery?
Can you get into recovery mode? Download mode??
At least it still turns on :fingers-crossed:
Many Thanks for the response. I have solved it not. The reason it was happening was the battery had to be fully charged. It was charged enough to boot but not to update. Left it for a while on charge and restarted and everything was great

Note 2 charging issue(Charger/charging port is fine)

I have a T-Mobile Galaxy Note 2. I have been using ResurrectionRemix 5.5.4 for the past month but last night my phone stopped charging suddenly(the charger was perfectly fine). I thought of giving it a restart but then it automatically booted itself into Odin Mode. This happened 5-6 times.
I ejected the SD card and I was able to boot into recovery mode so I flashed a new ROM assuming the problem occurred due to the ROM. It worked fine after that but now again, it stops charging for a few minutes. It doesnt even detect the charger but it charges perfectly fine through my laptop.

Dead ZenFone 2 or something else?

Hello everyone
I got a ZE551 ML Z3580, 4 GB and 64 GB. It runs on Resurrection Remix 5.7.3 (MM) and it was a great phone til I had to change the screen two months ago.
Then it worked fine until this morning. I was using "Asus Pixel Camera" and the phone just shut down and vibrate 2 times (the same vibration as when the phone starts).
I tried to start the phone again but it never went over the boot animation. It shuts down 2 seconds after the beginning of the boot animation.
I tried to reinstall the ROM but the phone shut down before the end of the flash. I tried to flash with the ROM on a USB OTG and it wasn't better. I tried to put the file on the internal storage (sdcard in TWRP) but the copying of the file never ended and the phone shuts down/restarts. I don't know what's my problem, it never happened before. Just hope it isn't a hardware problem.
Can you help me?
Thanks
Outpapa said:
Hello everyone
I got a ZE551 ML Z3580, 4 GB and 64 GB. It runs on Resurrection Remix 5.7.3 (MM) and it was a great phone til I had to change the screen two months ago.
Then it worked fine until this morning. I was using "Asus Pixel Camera" and the phone just shut down and vibrate 2 times (the same vibration as when the phone starts).
I tried to start the phone again but it never went over the boot animation. It shuts down 2 seconds after the beginning of the boot animation.
I tried to reinstall the ROM but the phone shut down before the end of the flash. I tried to flash with the ROM on a USB OTG and it wasn't better. I tried to put the file on the internal storage (sdcard in TWRP) but the copying of the file never ended and the phone shuts down/restarts. I don't know what's my problem, it never happened before. Just hope it isn't a hardware problem.
Can you help me?
Thanks
Click to expand...
Click to collapse
Can you boot to twrp still ?
If you can
Connect wall charger , boot to twrp . select reboot and power off.
See what battery is doing after.
Sounds like a battery issue to me. Let it charge for a long time (like 24 hours) then try again
Thank you, I'll try it tonight. I just ordered a Xperia X Compact to replace it.
So, I did it with the phone plugged to the wall. And now it's okay. It seems to work fine but I don't understand how this all thing happened.
Thank you

S4 Mini stuck on Samsung Logo

Hello,
I installed LineageOS 14.1 on my S4 Mini about 2 weeks ago and it was working normally, but today when I went turn on it, after it started normal, it caught and shutdown, now when I try turn on again it does not leave the Samsung Logo and if it starts in Recovery Mode it does not leave the TWRP Logo.
neo39 said:
Hello,
I installed LineageOS 14.1 on my S4 Mini about 2 weeks ago and it was working normally, but today when I went turn on it, after it started normal, it caught and shutdown, now when I try turn on again it does not leave the Samsung Logo and if it starts in Recovery Mode it does not leave the TWRP Logo.
Click to expand...
Click to collapse
I have the same problem. While charging over night I realized that somehow my phone turns off. This morning I saw it got stuck at the Samsung Galaxy S4 mini logo. After trying several times to turn it off and on I tried it with the recovery mode. It worked in the beginning. I tried to avoid wiping out the data. It didnt work at all. Even not wiping out somehow. It showed me some error messages.
Now it itsnt even going into recovery mode and it stays in this TWRP logo (version 3.0.2-1).
I also tried to flash different TWRP ROMs with Odin without success. It always showed the same logo again and again.
My LineageOS 14.1 was always stable

Categories

Resources