Related
Hi all,
Just day ago baught TP2 and it's great. but today got in problem.
there are invisible glide protectors on side of keyboard, and from one side this protector came off - and now every time I open it, it's more and more coming off.
so what you think? is it possible to get new them somewhere? or it's sefe just to remove them? all of you have the same at their phones?
test157 said:
Hi all,
Just day ago baught TP2 and it's great. but today got in problem.
there are invisible glide protectors on side of keyboard, and from one side this protector came off - and now every time I open it, it's more and more coming off.
so what you think? is it possible to get new them somewhere? or it's sefe just to remove them? all of you have the same at their phones?
Click to expand...
Click to collapse
That is the normal protectors installed from factory, during manufacturing for product quality reasons. I admit that they really protect the plastic from getting scratched. But as mentioned in the manual, you should remove it from the phone itself (both glide stickers, the upper sticker in the keyboard, near the hidges, the back screen cover sticker and the front sticker protecting the screen). To substitute, I must say that problably you should cut some plastic clear sticker (same used to protect book covers) with the size and format of the sticker removed and attached in the glide sections to protect it from scratches of opening and closing the keyboard.
thank you very much for your info.
but can you say me where exactly did you find info about removing this protectors? I just looked in manual what was on CD with my phone for word "protect" and not found any info about that.
and yes, I saw that those protectors had scratches, they were noticeable - but with time they will become more and more visible (more scratches, dirt around them e.t.c) + I don't think I can cut them so accurate as they were...
so all owners of T2? did you remove these protectors? did you got there scratches after removing them?
P.S.: Black Phoenix you leaved your protectors also? just on keyboard?
test157 said:
thank you very much for your info.
but can you say me where exactly did you find info about removing this protectors? I just looked in manual what was on CD with my phone for word "protect" and not found any info about that.
and yes, I saw that those protectors had scratches, they were noticeable - but with time they will become more and more visible (more scratches, dirt around them e.t.c) + I don't think I can cut them so accurate as they were...
so all owners of T2? did you remove these protectors? did you got there scratches after removing them?
P.S.: Black Phoenix you leaved your protectors also? just on keyboard?
Click to expand...
Click to collapse
At the moment I have all the protectors, because I'm waiting for my Screen Protector from Proporta. The others in the keyboard I will keep, mainly because I bought a phone with the keyboard but I only use the screen one, not the physical one (so If I had open the keyboard 10 times since I had the phone was too much).
If it is a clear sticker than obviously you remove it once it wears out and live with it....
yep, I got it. but hope to hear from other owners who already removed them, what experince they got - any scratches or nope?
Mine is sliding off on the left side only. I was just going to slice off the part that is crinkling up and keep the rest of it on. I don't want to find out if it will get scratched or not.
I removed the ones on the sides as i knew they were merely their from the factory and not actually their to protect during use. I dont have any scratches on the keyboard.
The back one, under the middle of the screen i havent removed because it looks like it would be too much of a pain to try. So im just waiting till it starts to come off on its own.
if you're concerned about being able to cut them as precise as the originals just use an exacto knife. Just put the plastic piece over the plastic you will use to replace it and trace it with the knife.
i just cut off the tips on both sides as it was crinkling up, kept the rest of it
Lyian said:
I removed the ones on the sides as i knew they were merely their from the factory and not actually their to protect during use. I dont have any scratches on the keyboard.
The back one, under the middle of the screen i havent removed because it looks like it would be too much of a pain to try. So im just waiting till it starts to come off on its own.
Click to expand...
Click to collapse
how long you are useing it without stickers? and how offten do you open hw keyboard?
test157 said:
how long you are useing it without stickers? and how offten do you open hw keyboard?
Click to expand...
Click to collapse
just rip it off and live with it dude... I took the film cover off of my Xperia and nothing happened to my keys. If you are worried about the glossy back scratching than you obviously have too little things to worry about.
And if you are that person than obviously you can afford a second one because taking it off won't damage any phone.
poetryrocksalot said:
just rip it off and live with it dude... I took the film cover off of my Xperia and nothing happened to my keys. If you are worried about the glossy back scratching than you obviously have too little things to worry about.
And if you are that person than obviously you can afford a second one because taking it off won't damage any phone.
Click to expand...
Click to collapse
well if really, I don't worry about back side scratches and about other minor things all I see now it's two stickers what are located on the left and right sides from the keyboard (i don't see so space in xperia), this space is used for gliding - so every time you are opening keyboard, two small stands from the back of the screen sliding in this area, where these stickers are - and after two days of using this device - this stickers are pretty scratched. so I decided to ask, if it's safely to remove or it's they needed to be replaced and seems like I'll finish by removing them both.
but anyway other owners experience is welcome
test157 said:
well if really, I don't worry about back side scratches and about other minor things all I see now it's two stickers what are located on the left and right sides from the keyboard (i don't see so space in xperia), this space is used for gliding - so every time you are opening keyboard, two small stands from the back of the screen sliding in this area, where these stickers are - and after two days of using this device - this stickers are pretty scratched. so I decided to ask, if it's safely to remove or it's they needed to be replaced and seems like I'll finish by removing them both.
but anyway other owners experience is welcome
Click to expand...
Click to collapse
Just like I said........ the back side get's scratched....
unless you are talking about the sticker that is most likely found on the bottom half (the half that is on the same plane as the keyboard).
If so, then I hope it only scratches everything but the qwerty keys.
test157 said:
how long you are useing it without stickers? and how offten do you open hw keyboard?
Click to expand...
Click to collapse
I took it off within a couple days, cause thats when i noticed they were even there lol. Its hard to say how often i open it. I generally text with the keyboard all the time (vs using the on screen one). Some days ill send 4 or 5 text messages, some i wont send any.
I dont think any of us has really had it long enough to even accumulate scratches from simple wear and tear. What you have to realize is that plastic film, is the same kind they wrap EVERYTHING up with. It was on my 46" LCD (the frame i mean) as well as both of my 19" monitors (also the frames). They wrap electronics up in that crap to keep it from getting scratched during manufacturing and shipping, but it rarly ever looks good left on.
My point? it isnt meant for long term protection. Just rip it off and run with it. The plastic housing is the same material/texture as what they use on laptops (least on mine) so it will take the wear and tear. I suspect over time it will develop 'slide' marks on it, but it wont take anything away from the device itself.
Lyian said:
-
Click to expand...
Click to collapse
yep thank you, now i c that it's the one right decision, just to remove them
poetryrocksalot said:
-
Click to expand...
Click to collapse
I'am sure that we are talking about the same things but anyway I attached photo to this post, with marked RED scratches on the sticker, and marked in BLUE came off part of this sticker.
all my previous HTC phones herlad and wizard had special sliders - where the display glides, here it glides on the viewable area and it don't seems really very scratch resistance, so it's confused me.
the protector at the middle top of the keyboard, and the one behind the screen
i wonder whether sliding is affected by the 2 protectors?
I had 4 protectors: screen protector, behind screen one, and two at keyboard - on it's sides (on of them you can see on my photo), so while gliding only these 2 protectors are affected.
i removed the small one at the middle top of the keyboard
now the sliding is smoother!
i am left with the one behind the screen... should i remove..?
ok... i removed the one at the back
and now the sliding action is super smooth
Ok, So I really wanted the new Samsung Galaxy S2 (Euro) because it has the white with that iphone look but much cool-er.
But forking out that money is a no no.
So after looking I found a white glass for the vibrant along with the white bezel you will get a 1 of a kinda white vibrant!!!!
http://www.ebay.com/itm/White-Outer...985?pt=LH_DefaultDomain_0&hash=item3cbeda8621
I just purchased it last night. I will purchase the white housing when I get back home and will see how it goes.
If anyone has this already please let me see some pictures
Ooh, update us on how that works for you. I know how to replace bezel/housing, but I don't know how to do JUST the glass since I think the digitizer is literally glued on. Pictures too! (My reaction to the EBAY listing: Holy ****ing ****! GAAAAAASP!)
If yours works out, I'm so getting one! I really wanted to updated to the S2 as well purely for aesthetic reasons but I heard it doesn't work well with Tmo 3g ):
I am interested in this too. Please get back to us and let us know how it went. I have broken glass and this would be the cheapest fix.
Glad that you're trying this as I kinda want to also. I've heard that the OLED and Digitizer are glued on so you can't just try to pry it off.
If I were trying it, I would try to take an exacto knife blade and cut carefully (oh so carefully) through the glue instead of trying to peel up the screen, which is really fragile. Do you have any kind of plan?
Unfortunately, there isn't much information out there on taking the screen glass off without replacing the whole screen so any info you can give will help out a lot of people who are interested in replacing cracked/scratched glass as well.
Best of luck and please let us know how it turns out!
i will be interested too please someone make a video
Well, One of my co-workers is going to do the job for me. I saw him tackle an IPhone 4 screen replacement too. I have in the past did replace some phone screens on a mytouch and mytouch 4g.
I will see about getting detailed pictures when he does the job. I'm going to be researching it here on out too. Downside is the time it takes to get here!!!!!
Do what you can about tutorial, video or pictures, what ever it may be. I saw this a bought one immediately. I already have a nice back cover in white that has Samsung and Powered by Google on it, so thought this would be an excellent pair.
Let us know
Is it even possible to just replace the glass without the digitizer? I thought it was almost a single unit and you would have to replace both.
I would really like to know.
Just to let you guys know, the listing looks like it has a hole for the FFC. It would be a problem for those with it, but it might irk those without it.
anthonys2r said:
Just to let you guys know, the listing looks like it has a hole for the FFC. It would be a problem for those with it, but it might irk those without it.
Click to expand...
Click to collapse
That's nothing a little dab of white paint couldn't fix.
...also, why would it be a problem for people WITH the front facing camera? Seems ideal to me.
Seeing as the glass/digitizer-lcd is nearly impossible to separate with both intact, I was just thinking of gluing the glass to a screen protector, then applying that on the phone. Finish off with a hard case or silicone that covers the bezel (and a little of the phone so it also covers the edge of the glass (which I'm sure will be raised higher due to just putting it on top), and voila!
Having this succeeded would seriously help. I'm this close to just getting the Intl SGS2, but ahh, it wont work with Tmo past Edge .. ;_;
Anyone ever tried/seen a white bezel? Sand it down, paint it? I've seen a gold bezel, but that's about it. Wow, white and gold
JunkoIIX said:
Seeing as the glass/digitizer-lcd is nearly impossible to separate with both intact, I was just thinking of gluing the glass to a screen protector, then applying that on the phone. Finish off with a hard case or silicone that covers the bezel (and a little of the phone so it also covers the edge of the glass (which I'm sure will be raised higher due to just putting it on top), and voila!
Having this succeeded would seriously help. I'm this close to just getting the Intl SGS2, but ahh, it wont work with Tmo past Edge .. ;_;
Anyone ever tried/seen a white bezel? Sand it down, paint it? I've seen a gold bezel, but that's about it. Wow, white and gold
Click to expand...
Click to collapse
You are saying that you'd have a screen protector on top of a stack of two screens? I'd say that's an idea you shouldn't pursue, one because you're going to ruin the quality of the image you see, and two, you won't be able to touch your digitizer on the lower screen. Screen no workie!
If you've got to have a white border and you're not willing to get the whole shebang replaced, I'd say go with some cut vinyl. That's the cheapest route (time and money investment) that you could take. It would be interesting to see a white bezel. (the white Samsung Fascinate was so nice!) It seems like it would be paintable once you scuff up the surface. I just decided to find a solid white tpu case and it looks great in it. Covers the bezel perfectly.
ficklecycler said:
That's nothing a little dab of white paint couldn't fix.
...also, why would it be a problem for people WITH the front facing camera? Seems ideal to me.
Click to expand...
Click to collapse
whoops, my mistake!
ficklecycler said:
You are saying that you'd have a screen protector on top of a stack of two screens? I'd say that's an idea you shouldn't pursue, one because you're going to ruin the quality of the image you see, and two, you won't be able to touch your digitizer on the lower screen. Screen no workie!
If you've got to have a white border and you're not willing to get the whole shebang replaced, I'd say go with some cut vinyl. That's the cheapest route (time and money investment) that you could take. It would be interesting to see a white bezel. (the white Samsung Fascinate was so nice!) It seems like it would be paintable once you scuff up the surface. I just decided to find a solid white tpu case and it looks great in it. Covers the bezel perfectly.
Click to expand...
Click to collapse
Hm, you're right. Didn't think about the screen quality after two glasses/protectors ;_; I've tried the vinyl cut-out but after a while, I started to really notice/feel the edge of the vinyl when I'm swiping things around. So I really want to try the glass lens.
I'm going to look up that solid white tpu! I've only ever seen transparent TPUs
So is there anyway to really use this?
UPDATE!!!!!!!!!!!!!!!!
I recieved the glass.
Now, I want to try this so bad but Im need to be smart about this or I won't have a working phone.
I need to try this on a non working phone. If anyone still has or knows anyone with a screen with glass that is broken. Please let me know.
I will try and remove the OLED screen from it and see if it can be done.
Ooh, can you post pictures? I want to see how thick the glass is
Ha, this sounds like quite the project. I'll be anxious to see photos.
And it would probably look something like this to get it done:
http://www.youtube.com/watch?v=sT7wRXeYsyg
Too much work.
This mod wouldn't work unless you know how to attach a digitizer onto a glass screen, also check the listing again - the glass comes without a flex cable soldered on.
Hey guys
Just got the phone today after a long two years with the galaxy s3 and im very impressed over the improvement over the S3 and im glad that I picked this device.
I've noticed that if you look at the light senser on the front that there appears to be what looks like a a screen protecter. Is this correct?
Thank you
I think that is just part of the screen that extends over the speaker, sensor, and camera. Plus the screen responds like it is unprotected. I hate screen protectors so you had me scratching on my trying to see if anything would peel off.
I think that's just the way the phone is - I also hate screen protectors and you had me worried.. made me triple-check my phone lol.
xShin said:
I think that's just the way the phone is - I also hate screen protectors and you had me worried.. made me triple-check my phone lol.
Click to expand...
Click to collapse
Haha sorry looking into it, seems to be a small protecter over the light sensor.
The GPEL screen protector is fantastic! No dot matrix, full adhesive, comes with 2, affordable, case friendly & no Halo affect.
The black border is just a tad too big, so you lose a row of pixels..
https://www.amazon.com/dp/B07D1CG8QY/ref=cm_sw_r_cp_apa_MQYCBbYM79AP7
Thanks for sharing the review!
Hello,
Does the black line cut from the sides of the screen ? Or the bottom ?
Thank you !
Al3xxxinho said:
Hello,
Does the black line cut from the sides of the screen ? Or the bottom ?
Thank you !
Click to expand...
Click to collapse
I currently have this protector, as stated in the OP it cuts off a little on all sides and is it a bit crooked. I have plans to review another screen protector (might be the one) in a new thread soon
So, anyone that sells this internationally for less than 15usd for shipping?
8bitbang said:
I currently have this protector, as stated in the OP it cuts off a little on all sides and is it a bit crooked. I have plans to review another screen protector (might be the one) in a new thread soon
Click to expand...
Click to collapse
Care to share which one? I just picked up a g7 yesterday, have a SUPCASE UB Pro on order, want to pull the included plastic shield, put on glass.
The gpel sounds good, but I'm interested in seeing what else looks solid. (Not interested in going to the $50 dome glass.)
Sent from my LM-G710VM using Tapatalk
markfm said:
Care to share which one? I just picked up a g7 yesterday, have a SUPCASE UB Pro on order, want to pull the included plastic shield, put on glass.
The gpel sounds good, but I'm interested in seeing what else looks solid. (Not interested in going to the $50 dome glass.)
Click to expand...
Click to collapse
I have 2 g7s one with gpel and dome glass. Do you want a side by side comparsion picture. Either is perfect and has flaws
8bitbang said:
I have 2 g7s one with gpel and dome glass. Do you want a side by side comparsion picture. Either is perfect and has flaws
Click to expand...
Click to collapse
Sure, thanks!
Sent from my LM-G710VM using Tapatalk
Dome is on the left and GPEL is on the right
Dome - doesn't affect the sensors but it's smaller than the actual display. It's a bit too short on the left and right sides. This causes light bleed on the edge of the screen protector. Dust magnet but less likely to have bubbles
GPEL - affects sensors and black borders cut off display and is especially noticeable when watching YouTube videos in full screen pinch. Bubbles can happen
8bitbang said:
Dome is on the left and GPEL is on the right
Dome - doesn't affect the sensors but it's smaller than the actual display. It's a bit too short on the left and right sides. This causes light bleed on the edge of the screen protector. Dust magnet but less likely to have bubbles
GPEL - affects sensors and black borders cut off display and is especially noticeable when watching YouTube videos in full screen pinch. Bubbles can happen
Click to expand...
Click to collapse
What are the sensor impacts from using the gpel?
Sent from my LM-G710VM using Tapatalk
markfm said:
What are the sensor impacts from using the gpel?
Click to expand...
Click to collapse
It can cause the display to dim and sometimes turn off like when you raise your phone to answer a call. To be fair all full cover screen protectors are suffering for this flaw. Even OtterBox is getting massive hate for their version and is temporary unavailable.
Just to let you guys know,
You will NOT have the "notch" border pixel line problem if you perfectly align the holes at the top with the sensors, but with a catch: you have to align it with the sensor being more towards the bottom than dead center. My very first screen protector had it more towards the top (basically, the entire protector aligned downwards 1mm, which made the notch very prominent). Then I wasted two more trying to make it bottom aligned. (edit). That fixes the sensor problem and the pixel problem at the top with the notch, unless you are looking down at the phone from above the phone (and who the hell does that?). Unfortunately, perfect alignment is expensive and will cost you several screen protectors since you have to deal with lifting and replanting as well as small nudging WHILE you are in a steamy bathroom hoping for no dust hairs to drop on something. Took me three of them to get it perfect. But I got perfect and I'm pleased.
The left and right sides black bars aren't a problem; the missing pixel line can always be seen by looking to the side of the phone. Just remember to focus on aligning the TOP first (edit) align the ridged sensor so it's almost touching the bottom cutout) and then pressing the top down, then the middle. That's the hard part. This will also cause a few air bubbles on the sides, which means you will have to carefully lift the edges and press outwards to reapply again, and make very sure your fingernails are spotless. That is going to be the risk of dust getting in there, so be careful. Get it perfect then everything will make you happy.
The results are worth it.
Falkentyne said:
Just to let you guys know,
You will NOT have the "notch" border pixel line problem if you perfectly align the holes at the top with the sensors. That fixes the sensor problem and the pixel problem at the top with the notch, unless you are looking down at the phone from above the phone (and who the hell does that?). Unfortunately, perfect alignment is expensive and will cost you several screen protectors since you have to deal with lifting and replanting as well as small nudging WHILE you are in a steamy bathroom hoping for no dust hairs to drop on something. Took me three of them to get it perfect. But I got perfect and I'm pleased.
The left and right sides black bars aren't a problem; the missing pixel line can always be seen by looking to the side of the phone. Just remember to focus on aligning the TOP first and then pressing the top down, then the middle. That's the hard part. This will also cause a few air bubbles on the sides, which means you will have to carefully lift the edges and press outwards to reapply again, and make very sure your fingernails are spotless. That is going to be the risk of dust getting in there, so be careful. Get it perfect then everything will make you happy.
The results are worth it.
Click to expand...
Click to collapse
Where's your proof? Both the OP and me have reported information (with evidence mind you) that contradicts your statements.
8bitbang said:
Where's your proof? Both the OP and me have reported information (with evidence mind you) that contradicts your statements.
Click to expand...
Click to collapse
My proof is me owning the phone and going through 4 GPEL screen protectors before I got it perfect. I paid my dues. And as someone disabled and on SSI and with a fixed income, I don't have money to go through infinite screen protectors, unlike some of you people here.
The trick is to align the "ridged" sensor so that it's (edit: just looked at my phone: the hole aligned at the -bottom- of the ridged sensor, rather than dead center! but not blocked by the edge of the screen protector), sensor bottom aligned and then after that, making sure all the sides are perfectly straight when applying (a LOT harder than you think, even in a steamy shower, because I'm in an old apartment). Took me 4 protectors and cost me over $30 dollars. (air bubbles and dust from me constantly having to re-lift to get the orientation perfect and eventually dust getting under the edges, and I have OCD so I want nothing less than perfection). Might even give GPEL an email and see if they'll send me an extra sample for my troubles. And no, I have no way to take a picture of the phone screen for you.
I forgot that I had it 'bottom' side sensor aligned rather than mid sensor aligned because I spent over 30 minutes in the shower sweating and uncomfortable wasting screen protectors trying to get rid of the notch line and getting it on with air bubbles. I was extremely stressed out, and it's difficult for someone with a metal bar in their spine to have to work that hard. Needless to say the fourth protector (thank god) I got absolutely perfect.
If it's dead center yes you will have a pixel row of the notch visible. So you have to 'raise' the protector upwards by that same pixel space. There's enough cutout to work with to make that work.
This is no problem because the very *BOTTOM* of the phone isn't used by the display (since this is an IPS display; someone mentioned this in a review, compared to OLED), unlike the top, so you have like 1mm of extra room to work with for the cutout (as long as the top sensor isn't blocked by the bottom edge of the protector). The black border at the bottom won't interfere with anything (checked with a screen test in the service menu).
I'll -try- to upload a picture of the phone with my laptop's built in camera if I can later on, but please don't be upset if you don't like the quality. My laptop isn't high definition and isn't made for such precise pictures. 720p isn't going to work very well.
@Falkentyne - thanks for the explanation.
It sounds like the critical part is where the protector is relative to the front mounted speaker (towards the right edge of the notch) front mounted camera (center of the notch), mystery circle to the left of the camera, and tiny notification led circle furthest to the left side of the notch?
If a photo of your own screen is hard to get, I've attached a photo, the top part of the g7 screen. Maybe draw a line showing where the gpel edge needs to be (outside edge of the line = outside edge of the gpel).
This is the best I could do.
markfm said:
@Falkentyne - thanks for the explanation.
It sounds like the critical part is where the protector is relative to the front mounted speaker (towards the right edge of the notch) front mounted camera (center of the notch), mystery circle to the left of the camera, and tiny notification led circle furthest to the left side of the notch?
If a photo of your own screen is hard to get, I've attached a photo, the top part of the g7 screen. Maybe draw a line showing where the gpel edge needs to be (outside edge of the line = outside edge of the gpel).
Click to expand...
Click to collapse
In your picture, move the screen protector UP about 1mm upwards so the bottom is where the red line is.
This will leave about 1mm of 'extra' space above the sensor area (whatever that thing is, sensor, microphone, I don't know). But it will still fit fully into the enclosure.
Took me 4 screen protectors to do this AND have no spare dust hairs from all the relifting !
Perfect thanks!
Just over the bottom edge of the front speaker (the oval on the right with the grid pattern).
I just got my gpel protectors in today, will give it a try tomorrow.
I installed it following your suggestion, it seems to be working fine. Thanks for the info!
markfm said:
I installed it following your suggestion, it seems to be working fine. Thanks for the info!
Click to expand...
Click to collapse
Glad you got it working and got the results you wanted.
It's good that the cutout is slightly larger than the speaker(and sensor/camera) itself, but bad that people won't know about this without experimentation (or somehow coming across the posts here).
Couple months ago air got between the inner screen protector and the screen along the crease like we've all seen before by other Fold 3 owners.
When I opened the Fold today I noticed a few dead pixels right in the middle of the inner screen. Closing and opening it again apparently killed the whole screen along the crease. The left side is still working, right side is completely dead.
I think the screen suffered a lot when opening the Fold. The screen protector probably moved a little bit every time I opened it and created some kind of pressure to the screen because of the air underneath. At least that's my explanation for it.
So if you've got air beneath your screen protector, replace it before your Fold ends like mine..
When mine started to peel out, I've just taken it out completely. I've assumed it's safer that way, so e.g. sand does not get between the protector and the screen.
It's ca month I'm using it without protector and all works great so far (also there are videos on YT saying that screen presents better without it, but nonetheless I would not remove it unless it peels out)
medikoo said:
When mine started to peel out, I've just taken it out completely. I've assumed it's safer that way, so e.g. sand does not get between the protector and the screen.
It's ca month I'm using it without protector and all works great so far (also there are videos on YT saying that screen presents better without it, but nonetheless I would not remove it unless it peels out)
Click to expand...
Click to collapse
I read that you loose warranty if you remove it, that's why I didnt do it. Now that I have to send it in I don't want to risk Samsung rejecting it because I peeled it off, you know.
There's also no official store close to where I live where I could have replaced the screen protector.
Taking mine in on Monday as I started to get an air gap at the bottom of the hinge... Hope it holds out until then
I got mine in mint condition from Swappa and it had the inner screen protector with no issues but after about a month of heavy use it started coming up at the bottom in the crease so I just removed it because it was getting hair and pocket lint under it and making the screen look bad. So far months later I've had zero issues.
Considering I got this second hand, I never expected a warranty anyway so if anything were to happen I plan on either trading it in for something else or paying for a repair at a local shop or do it myself (I own my computer repair business and I could probably figure it out)
HeyHooBanana said:
Couple months ago air got between the inner screen protector and the screen along the crease like we've all seen before by other Fold 3 owners.
When I opened the Fold today I noticed a few dead pixels right in the middle of the inner screen. Closing and opening it again apparently killed the whole screen along the crease. The left side is still working, right side is completely dead.
I think the screen suffered a lot when opening the Fold. The screen protector probably moved a little bit every time I opened it and created some kind of pressure to the screen because of the air underneath. At least that's my explanation for it.
So if you've got air beneath your screen protector, replace it before your Fold ends like mine..
Click to expand...
Click to collapse
wow! same exact thing happened to mine! looks identical! Had to tell samsung it happened out of nowhere im waiting on the RMA to return now> Thank you i was using a skinomi and yup air under the screen. you saved me future headache my friend thanks!