Develop Bugs

Can anyone unlock the Huawei E220 HSDPA modem?

Ebuyer are currently selling the Threepay version of the Huawei E220 modem at £69, a total bargain, so I bought one. Being a loyal Orange customer I'd like the option to take up a 3G data plan once they decide to keep up with thir competitors, and ofcourse this means that i'll need a device unlock. Any known hacks for these modems?

www.dc-unlocker.com or www.kulankendi.com
is the best bet i think but not free
Kulankendi is £11/ 15 euros, quick and easy. Ive used these in the past but not for this modem.
Also this is rumoured to work and im gonna give it a got tomorrow.
So i will update post with result
UNLOCKING '3' HUAWEI E220 USB MODEM
Huawei E220 USB modem is supplied by 3, T-Mobile & Vodafone.
Do the below with your laptop running on mains power or from a desktop pc.
READ through all the instructions first before starting. You do this at your own risk. It will void your warranty with your network provider.
Go to: http://www.mobileconnected.co.uk/usb...-vista-take-2/
Do Step one on the above link if you are using Windows VISTA. If you are not go direct to step two.
Do Step two on the link above regardless of the OS you are using. This will update the modem firmware to the latest version.
DO NOT DO STEP 3 on the link above. IT IS FOR VODAFONE MODEMS ONLY AND WILL LOAD THE VODAFONE DASHBOARD ON YOUR MODEM!
Go to: http://www.huawei.com/mobileweb/en/d...type=-1&id=736
Download E220-UTPSB002D03SP04C03 (Normal) (7813 KB) 23-Nov-2007. Extract and run.
Edit: Just seen E220-UTPSB002D03SP16C03 (Normal) (6870 KB) 14-Jan-2008 is now on the site. I personally used the above.
The above program will update your modem dashboard to the latest version and unlock your modem. It replaces the '3' dashboard.
----------------------------------------------
You will need to run the Mobile Partner setup program from your modem to install the new dashboard on your laptop.
Your new dashboard is the Mobile Partner software.
To set up a connection in Mobile Partner go to:
Tools > Options > Profile Management
Click New
Enter a profile name
The Settings for the '3' network are:
APN static
APN: three.co.uk
Access number: *98#
No username or password required leave blank
Click save
If you use a different networks simcard you will have to create a profile for that particular network using the correct settings for that network.

Unlock E220 HSDPA Modem - Free Guide + Softwares
tholmewood said:
Ebuyer are currently selling the Threepay version of the Huawei E220 modem at £69, a total bargain, so I bought one. Being a loyal Orange customer I'd like the option to take up a 3G data plan once they decide to keep up with thir competitors, and ofcourse this means that i'll need a device unlock. Any known hacks for these modems?
Click to expand...
Click to collapse
Software Pack + User Guide = Free of Charge
http://www.unlocke220.blogspot.com

[Q] No 4g LTE?

Hello my fellow XDA'ers
I was going trough my phone and running some benchmarks and i found that AnTuTu said on the tab: Device info..... Network : GSM/WCDMA.
After that i went to the Mobile networks it said the same (screenshot below)
Just to give you some backround info i rooted it and flashed custom recovery and rom but i flashed everything back using Odin.
I never used 4G LTE because it is not available for me here in The Netherlands.
Using T-Mobile for now (going to KPN soon but i want to keep my number so i am still on T-Mobile)
Stock ROM (build JRO03C.N7100XXALJ3)
Baseband: N7100XXALJ2

Nvm i found out than KPN screwed me.....i wanted to be sure that my phone had 4G so it be future proof. I asked the guy if it had 4G LTE and his answer was yes. So guys what i found out (here on xda and google) that the N7100 DOES NOT HAVE LTE! but the N7105 HAS.

Omg this should be front page news!

I want to connect 3GPP LTE modem Huawei E392 via USB host of the SGN2 N7100. The app for the connection - PPP Widget writes that no driver found. Where can I find the driver for this modem on this device?

Vasisualiy said:
I want to connect 3GPP LTE modem Huawei E392 via USB host of the SGN2 N7100. The app for the connection - PPP Widget writes that no driver found. Where can I find the driver for this modem on this device?
Click to expand...
Click to collapse
Did you find the driver? I want to use e392 + N7100 + desktop dock!

3g dongle ?

Hello
In 4.4.2 fail to activate ppp widget. Remains locked and says no drivers found. Kerner have changed? to support 3G with OTG?
Thanks

D855 stock MM: about wifi 2.4GHz channel range

I have an international unbranded D855 just flashed with stock European MM kdz, unrooted.
After flashing I wasn't able to see my wireless router, the G3 didn't even show my 2.4GHz wireless network SSID in the network list!!!
Any other device in my house was connecting flawlessly with the same wireless router, and also the same G3 was previously able to connect.
I was just thinking about a MM wifi problem and preparing to flash back KK, Lollipop, 21C modem... bla bla...
Until I decided to check the router settings and noticed that the router's Auto channel selection option had chosen the channel 12: well... channel 12 is legally and perfectly usable in my country, but I remembered that in USA the last allowed channel is 11..
Just to be sure, I forced the router to use a channel between 1 and 11 and voila'... now the SSID was found and a wireless connection established.
The moral of the story:
the leaked stock European MM version doesn't allow to use 2.4 GHz channels 12 and 13 that are allowed in the European countries....
Any suggestion on how to enable these 2 channels?

Hi, I have Poland V30B ROM and europen version of G3 (D855). And few days ago I changed channel of my wifi router to 13, because I had slow download speed, because in my region are many wifi networks with lower channels. And G3 flawlessly connect to my router. I had hidden SSID, so I had wifi network manually created. I had only one problem with older laptop Lenovo, and that did not see channel 13, I made upgrade of wifi adapter driver and then laptop connect to wifi successfully too

Did you enable 40 MHz channel width on your 2.4 GHz wireless b/g/n/ac router?

I have Channel Width on Auto.. Options are: Auto, 20MHz, 40MHz

wlado93 said:
I have Poland V30B ROM
Click to expand...
Click to collapse
Is your version different from the one I installed:
http://forum.xda-developers.com/lg-g3/general/lg-g3-d855-stock-30b-marshmallow-kdz-t3283187

I think it's the same... I have this one: http://forum.xda-developers.com/lg-g3/development/stock-d855-30b-images-kdz-flashables-t3282012

Then it looks like you have installed the hybrid modem (or 21A), while I have the original 30B... correct?
This might be the difference...

Yes, I have hybrid...
You can try it, maybe your problem will be solved
Then write if it caused modem

wlado93 said:
You can try it, maybe your problem will be solved
Click to expand...
Click to collapse
Unfortunately I can't root to install the hybrid modem zip (no TWRP available)
Waiting for an official update or a way to change the channel range (maybe using a secret code?)

Android auto not working on redmi note 8 pro

Hello,
I have a Renault Twingo 2017 with R-Link updated to the last firmware version available that supports Android auto via usb cable (11.344 renault firmware) and I am on the last EU miui firmware 11.0.3 stable PGGEUXM with android 9 (01-11-2019 patch).
When I connect the phone to the usb port with the original phone's usb cable the car's system will tell 'usb device not supported'. I tried to dowgrade the android auto version by downloading it from apk mirror but it will automatically apdate the first time I open the app. Any suggestion to make it work?

hello it works well for me and what I did was remove the usb debugging. try

I found out it was not an issue with the phone but it's the car.. Renault enabled smartphone mirroring in the ECU only after a certain date so my car don't have it available (with the same firmware as mine later cars have it enabled by factory) . I ordered an obd adapter and I will check after enabling it with a guide I found on gps-rlink website and some related youtube videos about ddt4all program (I can't link external sites).
Probably this is not an issue with the phone itself.
This thread may be useful for people trying to use it on various renault models from 2017 and early 2018 advertised as compatible with android auto but without the mirroring icon available.

I confirm it is working fine after enabling it in the ECU of my car.
Bought a Ford Elm-327 bluetooth adapter with CAN switch, soldered pin 3 to 13 and pin 11 to 12, and with DDT4ALL wrote the "android auto enabled" flag into the ECU. Everything fine on note 8 pro, just updated yesterday to android 10.