Related
status: HTC One X, s-off, unlocked, no reliable firmware or ROM
the last things I've done are to follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=2598659
synopsis:
unlocked phone, changed CID to HTC__E11,
relocked phone, flashed firmware 3.14.401.31, ran RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
unlocked phone, flashed CWM recovery 5.8.4.0
problem: ROM will not start up and run reliably. I can't start recovery from bootloader, so I can't install another rom.
current getvar all:
Code:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
serialno: FA2A4W102453
imei: 35399505028163
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__E11
battery-status: low
battery-voltage: 3527mV
devpower: 0
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
further details
further history:
phone was imported into new zealand from unknown origin
when I started working on the phone, I remember is having CID: 11111111, and had HBOOT 0.96
I think Hong Kong zoned firmware and RUU 1.29.708.15 were a combination which allowed me entry to CWM successfully, though low hboot version limited me from flashing cyanogenmod 10.1/ 10.2. Didn't try other ROMs
when I was flashing earlier, the battery charge was above 4000mV, it seems to have lost a lot of charge overnight
any help or advice around finding the right firmware/RUU that might help me install a working ROM would be amazing.
if I'm barking up the wrong tree also happy to explore other leads.
thanks in advance
okey..for working recovery download cwm.img and flash it from FASTBOOT..then you can restore stock backup or flash custom rom..
Sent from my EndeavorU using Tapatalk 2
whimful said:
further history:
phone was imported into new zealand from unknown origin
when I started working on the phone, I remember is having CID: 11111111, and had HBOOT 0.96
I think Hong Kong zoned firmware and RUU 1.29.708.15 were a combination which allowed me entry to CWM successfully, though low hboot version limited me from flashing cyanogenmod 10.1/ 10.2. Didn't try other ROMs
when I was flashing earlier, the battery charge was above 4000mV, it seems to have lost a lot of charge overnight
any help or advice around finding the right firmware/RUU that might help me install a working ROM would be amazing.
if I'm barking up the wrong tree also happy to explore other leads.
thanks in advance
Click to expand...
Click to collapse
first of all flash again the same RUU 3.14.401.31 after this receive all update to latest JB and after this install Philz recovery and custom rom the 3.14 is not the lastest firmware for the HOX it is 4.20.401.3
whimful said:
status: HTC One X, s-off, unlocked, no reliable firmware or ROM
the last things I've done are to follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=2598659
synopsis:
unlocked phone, changed CID to HTC__E11,
relocked phone, flashed firmware 3.14.401.31, ran RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
unlocked phone, flashed CWM recovery 5.8.4.0
problem: ROM will not start up and run reliably. I can't start recovery from bootloader, so I can't install another rom.
current getvar all:
Code:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
serialno: FA2A4W102453
imei: 35399505028163
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__E11
battery-status: low
battery-voltage: 3527mV
devpower: 0
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Click to expand...
Click to collapse
can u guide me how u changed ur cid because i also want to change my cid i am using one x with CID Orange_001
ahmed309 said:
can u guide me how u changed ur cid because i also want to change my cid i am using one x with CID Orange_001
Click to expand...
Click to collapse
fastboot oem writecid 11111111
11111111 - Super CID other CID you can check in nandroid backup thread mine is HTC__032 x.xx.401.x WWE base
phone no longer booting
thanks for everyone's suggestions.
since the first post I haven't been able to try anything, because phone seems unresponsive (will not boot at all).
I've tried leaving it all night plugged into a wall charger (while off).
If it is battery, I'm aware of charging issues this phone has and the batchfile/ cwm 5.8.4.0 workarounds, but I can't get into recovery nor bootloader. If it's charge is there any way to get the phone enough charge?
Is the phone bricked?
phone now has some charge, still being awkward
ok have access to bootloader again. I'm trying rerunning the RUU, but having trouble... RUU tries to restart phone but fails.
I'm wondering if i've misunderstood how the region matters. the only stability i have seen is with old honkkong region firmware and old RUU (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed.exe)
can anyone give me a clear idea of whether using x.xx.401.xx on an s-off phone makes any difference ...
or should i be looking for x.xx.708.xx ruu and 708/hongkong firmware?
Hey there,
i have a strage problem, after rooting a lot of android devices the m8 behaves kind of strange.
I got a brand new M8 (Hbot 3.15xxxx and 4.4.2) for my girl friend and unlocked the device with htc dev. after this i flashed twrp 2.7.0.2, no big deal.
Now i made a backup (thank god....) and downloaded viper rom and arhd roms.
But if i install a rom (does not matter which one, with wipe and so on) the script tells me installtion is finished, but if i hit the next button the m8 vibrates and turns off, at least the screen goes dark.
the only way to wake up the m8 is to push power and volume up button, but the only thing i see is the htc logo with the red text at the buttom.
adb reboot boatloader does not work, but reboot recocery does. Wipen cache and so does not fix the problem, the stock backup can be restored.
do you have any idea what's going on, i really want to run viper or arhd on the m8.
thanks!
Havoc2k said:
Hey there,
i have a strage problem, after rooting a lot of android devices the m8 behaves kind of strange.
I got a brand new M8 (Hbot 3.15xxxx and 4.4.2) for my girl friend and unlocked the device with htc dev. after this i flashed twrp 2.7.0.2, no big deal.
Now i made a backup (thank god....) and downloaded viper rom and arhd roms.
But if i install a rom (does not matter which one, with wipe and so on) the script tells me installtion is finished, but if i hit the next button the m8 vibrates and turns off, at least the screen goes dark.
the only way to wake up the m8 is to push power and volume up button, but the only thing i see is the htc logo with the red text at the buttom.
adb reboot boatloader does not work, but reboot recocery does. Wipen cache and so does not fix the problem, the stock backup can be restored.
do you have any idea what's going on, i really want to run viper or arhd on the m8.
thanks!
Click to expand...
Click to collapse
Just a bug in TWRP, nothing to worry about. Disable from TWRP the screen timeout and you are good to go.
stathis95194 said:
Just a bug in TWRP, nothing to worry about. Disable from TWRP the screen timeout and you are good to go.
Click to expand...
Click to collapse
i don't think thats the problem. if the screen would timeout (like while doing backup or restore) i could wake it up.
but the device is not booting anymore then. Even if i do a adb reboot recovery and make a clean reboot. Just the htc logo with the warning.
could it be the firmware ? i dont see any information for hboot 3.15.....
thanks
Havoc2k said:
i don't think thats the problem. if the screen would timeout (like while doing backup or restore) i could wake it up.
but the device is not booting anymore then. Even if i do a adb reboot recovery and make a clean reboot. Just the htc logo with the warning.
could it be the firmware ? i dont see any information for hboot 3.15.....
thanks
Click to expand...
Click to collapse
Are you flashing a 4.4.3 ROM? which firmware are you on? Can you please do a :
fastboot getvar all
and post the outcome? Don't forget to hide your sensitive info (imei, etc)
stathis95194 said:
Are you flashing a 4.4.3 ROM? which firmware are you on? Can you please do a :
fastboot getvar all
and post the outcome? Don't forget to hide your sensitive info (imei, etc)
Click to expand...
Click to collapse
yes i will flash viper 2.0.0 or arhd 10.2 both are 4.4.3 roms.
device is running at 4.4.2 at the moment (rooted stock vodafone germany)
getvar all:
Code:
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.15.2133156.UA03_2G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT43FWM10422
imei: xxxxxxxxx
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: T-MOB101
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0a41237a
hbootpreupdate: 11
gencheckpt: 0
m8_ul...... what device is it? internation one? should be, there are no at&t or sprint devices in germany, are they?
edit: i think i found the problem:
ckpv5 said:
Right ... your current hboot is 3.16 so it's 1.54.707.7
I suggest that you restore 1.54.707.7 stock Backup, flash back stock recovery and do the OTA (no need to relock bootloader or S-On .. OTA update work on unlocked bootloader and S-Off)
Click to expand...
Click to collapse
so the firmware should be the problem, i am right?
Havoc2k said:
yes i will flash viper 2.0.0 or arhd 10.2 both are 4.4.3 roms.
device is running at 4.4.2 at the moment (rooted stock vodafone germany)
getvar all:
Code:
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.15.2133156.UA03_2G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT43FWM10422
imei: xxxxxxxxx
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: T-MOB101
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 0a41237a
hbootpreupdate: 11
gencheckpt: 0
m8_ul...... what device is it? internation one? should be, there are no at&t or sprint devices in germany, are they?
Click to expand...
Click to collapse
Well nothing strange here. You are on older firmware trying to flash a 4.4.3 ROM. First boot might take up to 15 minutes...But after that you will experience slow boots and/or wifi or bt issues.
You can either try to s-off and upgrade firmware or try a 4.4.2 rom like ARHD 8.1
First of all try the following. Flash the ROM and reboot and let it sit there for around 15 minutes to see if it boots. And we can see your choices from there.
If i want to update with OTA,
which stock recovery i need to flash ? my version.main is empty :/ so i am not sure how to flash the right recovery. there a lots of them: http://forum.xda-developers.com/showthread.php?t=2701376
Havoc2k said:
If i want to update with OTA,
which stock recovery i need to flash ? my version.main is empty :/ so i am not sure how to flash the right recovery. there a lots of them: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
Try here:
http://www.handy-faq.de/forum/htc_o...resammlung_ruus_otas_backups.html#post2832637
it's either 1.12.111.18 or 1.57.111.2
it is 1.12.111.18
at the moment the OTA to 1.57.111.2 is running
some german forums wrote that any 1.12.xxx recovery will work for the ota. let's see if there is another ota after this one.
edit: 1.57 went well, now ota to 1.70
I have HTC ONE m8 double sim card. I opened the boot loader and unlocked it. I added on it a recovery file. After adding the recovery file I deleted the original system.
It seems that the phone crashed. How can I reset it and return the original files? I need the RUU HTC ONE M8 double card for middle east HTC__J15 or I need any room that works on this HTC ONE M8 double sim card, HTC One M8 DUGL (dual sim type) .
plz help
kimoalex said:
I have HTC ONE m8 double sim card. I opened the boot loader and unlocked it. I added on it a recovery file. After adding the recovery file I deleted the original system.
It seems that the phone crashed. How can I reset it and return the original files? I need the RUU HTC ONE M8 double card for middle east HTC__J15 or I need any room that works on this HTC ONE M8 double sim card, HTC One M8 DUGL (dual sim type) .
plz help
Click to expand...
Click to collapse
Hy @kimoalex maybe that help you to solve your problem.
http://d-h.st/P1H Stock Recovery
https://mega.co.nz/#!WR4HHZrA!u7ToYlxDl8hq7Cny8SMwmdR45AZsty4tT83KWlvtukA Stock Backup
http://forum.xda-developers.com/showthread.php?t=2701376
hello,ive got the same phone/problem i need the ruu hboot file i think if anybodys got it .the link is dead
scott3595 said:
hello,ive got the same phone/problem i need the ruu hboot file i think if anybodys got it .the link is dead
Click to expand...
Click to collapse
This is a very old thread....
What's your CID ?
Never mind ... I saw your other post :
scott3595 said:
hi all,ive got my m8 dual sim stuck in bootloader ive deleted recovery and os .it only goes on boot loader screen .do i need to load ruu file with hboot?
M8_DUGL PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
OS-3.33.401.6
its factory unlocked and any help will be very appreciated
Click to expand...
Click to collapse
Download RUU_M8_DUGL_K444_SENSE60_MR_HTC_Europe_3.33.401.10 from here : http://forum.xda-developers.com/showpost.php?p=56140330&postcount=1
This will update your device to the latest KitKat 3.33.401.10
1. put your device in bootloader/fastboot mode and connect to PC
2. Right click the RUU exe that you downloaded, select "run as administrator" .. wait for it to run, later there is a dialog box, accept, next, next, update, blablabla until it finish and your device rebooted... done.
Note : this will wipe everything on your internal storage. Make a backup of important files before you proceed.
cid was HTC__J15 BUT I but i changed it to 11111111
Yeah .. I know .. read my edited post above.
ckpv5 said:
Yeah .. I know .. read my edited post above.
Click to expand...
Click to collapse
thx for your help ive got it sorted now
Stock Recovery
Where can i get the stock recovery for HTC One M8 Dual SIM?
naushu said:
Where can i get the stock recovery for HTC One M8 Dual SIM?
Click to expand...
Click to collapse
3.33.401.6 ??
http://sourceforge.net/projects/htconem8/files/Recovery/3.33.401.6_ds_recovery.img/download
Thank you so much for that link! Every other recovery I found had a wrong build fingerprint.
@ckpv5
@ckpv5
First thanks for the information.
Second:
I have
version-misc: PVT SHIP S-ON
version-bootloader: 3.19.0.0000
version-baseband: 1.22.30306251.27G
OS: 3.33.401.6
CID: HTC__J15
MID: 0P6B64000
Device Name: M8_DUGL
After I formatted everything (without having a backup), i managed to find a STOCK-ROM (Rooted) and install it "m8dugl_3.33.401.6_stock_rooted_deodexed_cptb.zip".
But Now I have the OTA update:
OTA_M8_DUGL_L50_SENSE60_MR_HTC_Europe_4.30.401.15-3.33.401.6_release_428495gkzen6r41ji8to70
But cant install it since I already have TWRP Recovery, and also don't have a backup from the STOCK-Recovery.
I tried your link
http://sourceforge.net/projects/htconem8/files/Recovery/3.33.401.6_ds_recovery.img/download
And after I flashed it it showed me the Broken Exclamation-Red-Mark.
Deleted,
@ckpv5 Appreciate your reply, but this RUU is for One M8, not for Dual SIM.
Thanks
Nader
NaderALDirany said:
@ckpv5
First thanks for the information.
Second:
I have
version-misc: PVT SHIP S-ON
version-bootloader: 3.19.0.0000
version-baseband: 1.22.30306251.27G
OS: 3.33.401.6
CID: HTC__J15
MID: 0P6B64000
Device Name: M8_DUGL
After I formatted everything (without having a backup), i managed to find a STOCK-ROM (Rooted) and install it "m8dugl_3.33.401.6_stock_rooted_deodexed_cptb.zip".
But Now I have the OTA update:
OTA_M8_DUGL_L50_SENSE60_MR_HTC_Europe_4.30.401.15-3.33.401.6_release_428495gkzen6r41ji8to70
But cant install it since I already have TWRP Recovery, and also don't have a backup from the STOCK-Recovery.
I tried your link
http://sourceforge.net/projects/htconem8/files/Recovery/3.33.401.6_ds_recovery.img/download
And after I flashed it it showed me the Broken Exclamation-Red-Mark.
Click to expand...
Click to collapse
1. Are you saying after you install the stock recovery and you tried to enter recovery and you got the exclamation red mark ? That's the stock recovery successfully installed.
2. After install stock recovery, reboot device, check OTA, download and let the system install. If it fails and you get the exclamation mark .. press and hold volume up button and tap/press once the power button. The recovery will show what error that you have. Usually the stock ROM that you have is not fully stock and some files are missing/modified then the OTA fails.
So .. which exclamation mark that you're talking about.
MaximN97 said:
Hy @kimoalex maybe that help you to solve your problem.
http://d-h.st/P1H Stock Recovery
https://mega.co.nz/#!WR4HHZrA!u7ToYlxDl8hq7Cny8SMwmdR45AZsty4tT83KWlvtukA Stock Backup
http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
Hi @MaximN97 the stock Recovery doesn't exist in that link Could you or @ckpv5 give me another one?
Shikaiya said:
Hi @MaximN97 the stock Recovery doesn't exist in that link Could you or @ckpv5 give me another one?
Click to expand...
Click to collapse
Read and click link in my signature
ckpv5 said:
Read and click link in my signature
Click to expand...
Click to collapse
Oh I see this http://forum.xda-developers.com/showpost.php?p=60211779&postcount=4 but what is the version for the dual sim ? the 3.33.401.6 or 4.30.401.15. I have Lollipop 5.0.2 at the moment. I'd like to root and unlock the bootloader, but I don't kow if is it better to wait the new update of Lollipop or do all now and later try to return stock
Edit @ckpv5 could u help me, please? Thak u
Don´t have the M8 more. Have now the M9. sorry
ckpv5 said:
Yeah .. I know .. read my edited post above.
Click to expand...
Click to collapse
Hello i am a new user so i cannot create a new thread.
i really need the ruu for this model
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30336021.13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.16.401.101
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT491WM00355
(bootloader) imei: 352272061100706
(bootloader) imei2: 352272061100714
(bootloader) meid: 00000000000000
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B64000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i got it bricked. Plus i cannot access the bootloader only for a couple of seconds and the phone will restart again.
So i guess the only way i have is to flash the ruu via an SD card. PLease help
elbittar said:
i really need the ruu for this model
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30336021.13G
(bootloader) version-main: 6.16.401.101
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B64000
(bootloader) cidnum: HTC__J15
(bootloader) security: on
Click to expand...
Click to collapse
hi
remove serialno,imei and imei2 from your post ( personal info and don't share it on public forum )
here is the RUU
http://www.mediafire.com/file/80f11..._release_465002_signed+by+HaMdY_GeM_FlAsH.rar
but i'm afraid you won't be able to flash it as you said the
i cannot access the bootloader only for a couple of seconds and the phone will restart again.
Click to expand...
Click to collapse
anyway you should try to flash it
edit:
the RUU in .rar extension extract it by 7z or any similar app and you will have the RUU in .zip extension
Forget this sorted it all out, now running SRom ported lollipop with sense 7 from the M9. Hboot no red text and faux locked/original/son. Super CID.
For the record, it's always a firmware/dalvic cache problem (98%)
Hi Guys so Im rooted running Android Revoluton HD ROMs on an international O2 phone S-on
I thought I would wipe the entire phone, bleach it like a PC and reinstall.
Not a problem except various elements dont work.
I installed Stock ROM (I think KitKat)
I installed ARHD 22. (Kit Kat) everything worked
I installed ARHD 34.(Jellybean Sense 6) no wifi
I installed ARDH 40.(Jellybean Sense 7) no HTC TV
I installed ARHD 41.(Jellybean Sense7) no images in Blinkfeed?
I know its probably because I wiped the misc folder but up until I did a clean wipe I could use all of these roms without a glitch.
So is it firmware?
What do I need to put back on my phone for them all to work
I am S-on at the moment and I know that isnt whats stopping these roms working.
Any suggestions?
eskimosound said:
Hi Guys so Im rooted running Android Revoluton HD ROMs on an international O2 phone S-on
I thought I would wipe the entire phone, bleach it like a PC and reinstall.
Not a problem except various elements dont work.
I installed Stock ROM (I think KitKat)
I installed ARHD 22. (Kit Kat) everything worked
I installed ARHD 34.(Jellybean Sense 6) no wifi
I installed ARDH 40.(Jellybean Sense 7) no HTC TV
I installed ARHD 41.(Jellybean Sense7) no images in Blinkfeed?
I know its probably because I wiped the misc folder but up until I did a clean wipe I could use all of these roms without a glitch.
So is it firmware?
What do I need to put back on my phone for them all to work
I am S-on at the moment and I know that isnt whats stopping these roms working.
Any suggestions?
Click to expand...
Click to collapse
It's firmware. You most probably have kitkat firmware and lolipop based roms will mess up your wifi and stuff. Take an ota or stay on kitkat.
Thanks will try
Do I just flash the zip file?
Im sure I probs do
eskimosound said:
Thanks will try
Do I just flash the zip file?
Im sure I probs do
Click to expand...
Click to collapse
If you are S-ON don't flash firmware. Just don't. You can flash rom zips, recoveries, kernels. You can write on these partitions with s-on: recovery, boot, system and data.
I've just used Sunshine to get S-off, what a joy to use!
So now I can just flash them right?
I've got my cid number matched it up with the ota and bingo?
Right?
eskimosound said:
I've just used Sunshine to get S-off, what a joy to use!
So now I can just flash them right?
I've got my cid number matched it up with the ota and bingo?
Right?
Click to expand...
Click to collapse
well im come from HTC One M7, and as long as the M8 is pretty much the same, you dont need s-off to flash the same firmware which your already on, or the next one step up, after all, this is exactly what an OTA does for you.
However, now your s-off anyway, you canflash any RUU or firmware you like, just make sure cid and mid match first. :good:
EDIT: there ia also no need to lock or re-lock the bootloader to flash anything now that your S-off, leave it unlocked all the time for everything, its a common problem on the M7 forums at the moment, people who are s-off or even s-on, locking bootloaders with custom rom's or recovery's on thier phones.
Thanks, so with the ota there are two for O2 my cid is O2___001 am I right that I can take the 001 OR the 002?
eskimosound said:
Thanks, so with the ota there are two for O2 my cid is O2___001 am I right that I can take the 001 OR the 002?
Click to expand...
Click to collapse
in all honesty, I would of thought the CID 001 and 002 were in the same ota, have you checked the android-info.txt file within the OTA itself, its just a zip file.
possible to post your fastboot getvar all without imei and serial number please, also a link to the OTA's your downloading would be good.
Well I've just tried to flash both....I enter recovery instal zip right?
It's giving me an error.
Will tell you that info in a minute when I get on my pc
eskimosound said:
Well I've just tried to flash both....I enter recovery instal zip right?
It's giving me an error.
Will tell you that info in a minute when I get on my pc
Click to expand...
Click to collapse
personnaly, if your just trying to get to Lollipop, I would change my CID to HTC__001 (thats 2 underscores, CID is always 8 digits)
Change MID if required.
and then flash the WWE International Lollipop full RUU, piece of cake. http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
But if the original isn't flashing what hope have I got with an HTC one. It's interesting to know though that I can change it.
So what next?
Oh hang on I will post my stats
OK Guys,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
eskimosound said:
But if the original isn't flashing what hope have I got with an HTC one. It's interesting to know though that I can change it.
So what next?
Oh hang on I will post my stats
Click to expand...
Click to collapse
Flashing an OTA manually is a different kettle of fish, its just an OTA not a full RUU, and you would still have to be full stock in order for it to succeed.
however, if you just require the firmware in order to use a custom LP rom, then just pull the firmware.zip out of the OTA and flash it.
you would then have to put a custom recovery back on your phone, copy a rom to your sdcard, and flash it from within TWRP recovery.
And im trying to flash O2 OTA
for here
http://forum.xda-developers.com/showthread.php?t=2701376
eskimosound said:
OK Guys,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.206.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.028s
Click to expand...
Click to collapse
you already have the latest firmware on your phone !!!
I installed ARHD 41.( Sense7) no images in Blinkfeed? ------ pulled from your first post, this is a common problem, if you mean its face ache, there is a fix for it on playstore.
OK is tere an RUU for O2 uk?
So im extracting the firmware at the mo, then I will flash it then I will try and install ARHD 41....
Im right that the O2___002 is an upgraded version of the 001 and its what I need right?
Otherwise im just replacing like for like.
eskimosound said:
OK is tere an RUU for O2 uk?
So im extracting the firmware at the mo, then I will flash it then I will try and install ARHD 41....
Im right that the O2___002 is an upgraded version of the 001 and its what I need right?
Otherwise im just replacing like for like.
Click to expand...
Click to collapse
nope O2___002 is a different cid, you need to use the 001 files, however, its the same as you already have on your phone.
CID is just carrier ID, so O2___001 will be something like O2 UK and 002 might be something like O2 france, no difference in files, just different regions.
Seanie280672 said:
nope O2___002 is a different cid, you need to use the 001 files, however, its the same as you already have on your phone.
Click to expand...
Click to collapse
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
eskimosound said:
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
Click to expand...
Click to collapse
nope its not your firmware, just checked a cid list, 002 is O2 DE, 001 is O2 UK http://forum.gsmhosting.com/vbb/f485/archive-htc-cid-list-1604812/
Make sure of a couple of things when flashing a custom ROM, check for problems other are having with it, by reading some of the later posts is what I always do, just a few pages, also and this is a must, read the OP's flashing instructions, so many people bypass this step, the most important step is to make sure your using the dev's recommended custom recovery for flashing.
I always full wipe before flashing anything, so in TWRP first factory reset, and then goto wipe - advanced - select everything except your internal storage and SDcard, and then always reboot back into recovery after the wipes before flashing the rom, it will nag you and say you have no OS installed, ignore it and Do Not Intall to SuperSU, the custom rom flash will do that for you.
During the rom installation, again I always select full wipe when given the option, you then know you have a clean slate to build the rom on.
eskimosound said:
So if its the same and ive got a problem its not the firmware right?
Or is it just an update.
I will tell you this is really easy but telling people how to do it is confusing
Click to expand...
Click to collapse
Your firmware is already current, and should work with latest ARHD. Blinkfeed not showing image is a known issue reported by others.
No need to mess with RUUs or firmware zips.
I have an HTC One M8 (International) and I don't remember how, since this happened long ago, but while flashing some ROM I somehow switched my phone back to S-On while the bootloader stayed 'Unlocked' but it showed the 'Tampered' sign.
After an year, my new phone isn't working and I needed to get my old phone back so I took it out and decided to wipe everything because I didn't care about the data inside it and I just wanted all the storage space. Unwittingly I checked every box in the 'Advanced' section of the factory reset menu, including the 'System' checkbox.
Now my phone has no OS, it has an unlocked bootloader with the latest TWRP installed (not completely sure about the latest part) but it shows 'Tampered' below the unlocked text and I've got 'S-On'. I had the Viper ROM on it before if that matters. It wont boot past the HTC screen which has the red text below it that tells us that the version of HTC is for developers.
I really need some help here, I'd greatly appreciate it.
R3dact said:
I have an HTC One M8 (International) and I don't remember how, since this happened long ago, but while flashing some ROM I somehow switched my phone back to S-On while the bootloader stayed 'Unlocked' but it showed the 'Tampered' sign.
After an year, my new phone isn't working and I needed to get my old phone back so I took it out and decided to wipe everything because I didn't care about the data inside it and I just wanted all the storage space. Unwittingly I checked every box in the 'Advanced' section of the factory reset menu, including the 'System' checkbox.
Now my phone has no OS, it has an unlocked bootloader with the latest TWRP installed (not completely sure about the latest part) but it shows 'Tampered' below the unlocked text and I've got 'S-On'. I had the Viper ROM on it before if that matters. It wont boot past the HTC screen which has the red text below it that tells us that the version of HTC is for developers.
I really need some help here, I'd greatly appreciate it.
Click to expand...
Click to collapse
Download a ROM on your PC and transfer it to an SD card, then flash it in recovery. Wiping everything in recovery doesn't wipe recovery, so you should still have TWRP on your phone.
To get there after you've inserted the SD card with the ROM to flash, power up your phone by holding power+vol down. That will boot you to bootloader. Use the vol keys to navigate to hboot and the power button to select it, and there will be an option to boot to recovery. Navigate to that, then flash the ROM.
xunholyx said:
Download a ROM on your PC and transfer it to an SD card, then flash it in recovery. Wiping everything in recovery doesn't wipe recovery, so you should still have TWRP on your phone.
To get there after you've inserted the SD card with the ROM to flash, power up your phone by holding power+vol down. That will boot you to bootloader. Use the vol keys to navigate to hboot and the power button to select it, and there will be an option to boot to recovery. Navigate to that, then flash the ROM.
Click to expand...
Click to collapse
I tried that, but it doesn't flash the ROM. Instead it starts flashing and then restarts back into TWRP midway. I tried flashing superuser the same way but to no avail.
You may have outdated firmware and outdated TWRP version. Most of current ROM won't get installed on outdated TWRP.
Post fastboot getvar all result without serial & imei no. We'll see what you need.
R3dact said:
I don't remember how, since this happened long ago, but while flashing some ROM I somehow switched my phone back to S-On
Click to expand...
Click to collapse
Are you sure it was ever s-off? S-off isn't need to flash ROMs, root, or a great many other things.
The only way you could have gotten s-off is with the sunshine app ($25); unless you did s-off with firewater before that method was disabled in Dec 2014.
R3dact said:
After an year, my new phone isn't working and I needed to get my old phone back so I took it out and decided to wipe everything because I didn't care about the data inside it and I just wanted all the storage space. Unwittingly I checked every box in the 'Advanced' section of the factory reset menu, including the 'System' checkbox.
Click to expand...
Click to collapse
There is rarely ever a reason to go into the Advanced section. But if you do, its called "Advanced" for a reason. You shouldn't be wiping any partitions on this device without understanding what it means, and what the results will be.
R3dact said:
Now my phone has no OS, it has an unlocked bootloader with the latest TWRP installed (not completely sure about the latest part)
Click to expand...
Click to collapse
If you haven't installed a new TWRP version in a year, there is no way its the "latest".
There is also no reason to guess at this. It says the TWRP version number right on the main screen of TWRP. You're always better of giving the specific number, instead of just saying latest. Folks on here often post they have the "latest" TWRP. But once prompted for the actual version number, I often find its something very old, often 2 years old!
R3dact said:
I have an HTC One M8 (International) and I don't remember how, since this happened long ago, but while flashing some ROM I somehow switched my phone back to S-On while the bootloader stayed 'Unlocked' but it showed the 'Tampered' sign.
After an year, my new phone isn't working and I needed to get my old phone back so I took it out and decided to wipe everything because I didn't care about the data inside it and I just wanted all the storage space. Unwittingly I checked every box in the 'Advanced' section of the factory reset menu, including the 'System' checkbox.
Now my phone has no OS, it has an unlocked bootloader with the latest TWRP installed (not completely sure about the latest part) but it shows 'Tampered' below the unlocked text and I've got 'S-On'. I had the Viper ROM on it before if that matters. It wont boot past the HTC screen which has the red text below it that tells us that the version of HTC is for developers.
I really need some help here, I'd greatly appreciate it.
Click to expand...
Click to collapse
Can you plz post fastboot getvar all here without the imei or serial#. We may be able to find you an RUU that may be able to recover your device.
Sent from my Nook HD using XDA Labs
ckpv5 said:
You may have outdated firmware and outdated TWRP version. Most of current ROM won't get installed on outdated TWRP.
Post fastboot getvar all result without serial & imei no. We'll see what you need.
Click to expand...
Click to collapse
===
my phone HTC ONE M8_WHL is just stuck on either bootloader or htc logo and it doesnot allow to flash anything, what ever i do i get one error "error: not allowed" kind of, plz help me
==============================================================
C:\ADB_new>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.651.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA457SF00649
(bootloader) imei: 990004991183470
(bootloader) imei2: Not Support
(bootloader) meid: 99000499118347
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.238s
==============================================================
smub said:
===
my phone HTC ONE M8_WHL is just stuck on either bootloader or htc logo and it doesnot allow to flash anything, what ever i do i get one error "error: not allowed" kind of, plz help me
==============================================================
C:\ADB_new>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.651.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA457SF00649
(bootloader) imei: 990004991183470
(bootloader) imei2: Not Support
(bootloader) meid: 99000499118347
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.238s
==============================================================
Click to expand...
Click to collapse
Jesus. 1.54.651.8 OS? That phone has never been updated since forever.
Go to this thread for instructions and links to update your device.
You want the ones that aren't "Harman"
EDIT: You are S-Off, so keep that in mind (security: off from your getvar)
Feel free to send me a PM if you need further instructions.