Related
Hi all.
before anything :
- this tool is for especialy for dualbooters because i havent tested in 1rst rom. but updater-script manage kernel flashed. prepare odin in case of bad flash, you're advised.
- always make nandroid before use and flash with my tool.
I saw that ppl have many trouble to install 4.4.2 kitkat roms on their device.
it seems that we have manu such "error status 7" , and these were about setting persmissions during flash.
so i decide to make an aroma to avoid this error.
if you flash an original 4.4.2 Kitkat rom and have the error, no need to flash another compatible recovery kernel to re-try, just use my aroma flasher with the steps i descride below. In the aroma advanced MENU, you will choose set_perm commands compatible flash instead of set_metadata commands persmission to see if flask process will work in fine
Sure, at end of process, a kernel will be flashed, dorimanx branch 8 i have put in pach you went to donwload, or another you have put instead like i describe in extra step 6 below too.
so, AROMA structure details is like this :
pach/AROMA
---------backupEFS <------- useful script, no need to touch.
---------KERNEL <------- place here your boot.img file. (original rom or other)
---------maliv2
-------------system/lib/egl/ <-------- maliv2 .so libs contents, no need to touch.
pach/data/app <--------- you can put som apks here, moved from /system/app/ (i often move in latinIME.apk from /system/app/ and then i free 40Mo on /system/ partition, its good for GAPPS)
pach/META-INF/....../ <--------- no need to touch.
the available download pach i use for some months now , is here :
UniversalAROMAinstallerFOR-4.4.2-ROMs-DefinitivePach.rar - 8.53 MB
how to use it
1 - download any kitkat 4.4.2 ROM your want to install I9100.
2 - try it normaly, and see if you have error on flash.
3 - when you got it, on PC, make a safe copy ot it somewhere, and open it with WINRAR. Then delete META-INF and other boot.img file. just let system folder in ZIP.
4 - uncompree my AROMA somewhere.
5 - drag and drop the 3 "bolded" folders (in aroma structured details) in ZIP rom you still have opened.
extra step 6 : in AROMA/KERNEL/ folder, you will find dorimanx branch 8 version (new @StanTRC recovery inside) i have put. You can replace it with any boot.img you want , even those from original rom zip you have safely somewhere on your PC. just extract boot.img from it and replace with in you new aroma installer rom zip you went to manage in steps 3, 4 and 5 .
aroma choice you will have :
"Compatibility of your Recovery Kernel",
"Your Kernel is compatible for set_metadata commands"
"Your Kernel ONLY understand set_perm commands"
"choose your based KK similar rom",
"AOSB BEANSTALK C-ROM EHNDROIX"
"CARBON"
"CM11 JELLYBAM"
"SABER PAC"
"PA"
"Resurrection Remix"
"SLIM SPIRIT"
"NEATROM AICP"
"SOKP"
"Backup EFS",
"Backup your EFS folder before flash"
"Skip"
"Kernel to flash at end of process",
"DorimanX 8 and MaliV2"<---------- option that serve to flash MALIV2 for dorimanX branch 8 users, dualbooters.
"any other kernel"
EXTRA TOOL : .db qulite bases "wiper" , it delete some .db files in some /data/data/com.android........../databases/ folders, usefull when we flash from <> based 4.4.2 roms, CM11 , RR , PAC , SLIM, PA....sometimes worked fines for me.
"Delete some SQlite .db files in ROM",
"YES ","Delete some SQlite .db from you installed rom to avoid com.android.phone FC or other FCs"
"NO thanks we can FLASH the ROM"
again, this is just for test and fun , dualbooters will like more that "normal" users. no risk to flash kernel in 2nd rom, but remember need maliv2 during AROMA....and i always afraid someone that try my work on 1rst rom will brick its device.....so i advertise everyone that before upload my "daily" works, i'm not always flashing them on my 1rst rom.
thanks.
How to use the pach
Hope image tuto are good readable .
1 - open ROM.zip with winrar
2 - delete some folders in ROM.zip
3,4 - what to copy from my pach to the ROM.zip
5 - explain about structure and tweak .
no image 6 - just flash new ROM.zip with my aroma.
thanks.
Ultimate Aroma Addons for KitKat 4.4.2 and JB 4.1.2 DualBoot Roms.
extracted Aroma Managment
Code:
"ROM TYPE",
"which type of rom do you use",
"JB 4.1.2
"KK ROM 4.4.2"
Code:
"4.1.2 rom runing",
"its on Normal install
"its on DualBoot install
Code:
"4.4.2 Options",
"apply or remove APKs",
"Addons apks
"Remove them
Code:
"Addons APKS",
"tick to add",
"Google Camera with Sphere"
"Google Keyboard"
"TW Launcher from PhenomRom TW Accuweather"
"S4 settings for KitKat
"S4 TW Launcher BY ANMOL7IFY need 25Mo on system
"Htc BlinkFeed v11 need 31Mo on system
"Htc BlinkFeed v11 on data partition
"Themes in data (2 cobalts themes added)
Code:
"Remove some added apks",
"tick to remove",
"Remove Google Keyboard
"Remove TW Launcher stuffs
"Remove S4 settings
"Remove S4 TW Launcher BY ANMOL7IFY
"Htc BlinkFeed v11 from all partitions
"remove Themes from data
Code:
"Google Play Sore 4.6.17",
"Install it or Not",
"Inverted Multi DPI Play Store
"Multi DPI Play Store
"Skip to Google Play Services 4.3.23
Code:
"Google Play Services 4.3.23",
"Install it or Not",
"Install it
"Skip
The Ultimate tool is here :
I9100Utimate-Aroma-AddonsFor-4.4.2or4.1.2ROMs-TouchWiz-GgSphere-GgKB-Themes-GgPLAY-GgServices.zip - 168.22 MB
thanks.
Troubadour666 said:
maybe another tool soon
Click to expand...
Click to collapse
hi
working perfectly, tested with crdroid built7
Flash session added in post 3
@nik60 , yes i think is good too
Troubadour666 said:
@nik60 , yes i think is good too
Click to expand...
Click to collapse
hi,
maybe you can added in aroma "pa micro gapps" that work in any rom
so people flash rom and gapps in one time
nik60 said:
hi,
maybe you can added in aroma "pa micro gapps" that work in any rom
so people flash rom and gapps in one time
Click to expand...
Click to collapse
i have made one pach with onle play store and google services , with others goodies, but i can re-script it with gapps. give me a way to follow what you think ppl need the most .
i mean this one, but i'm on some research about better way to use it, tomorrow i will post good version.
I9100-Aroma-addonsFor-KitKat-4.4.2-ROMS.zip - 180.81 MB
this one is that one i use in video review, you see i NEVER have trouble with space /system/ partition because initial ZIP ROM is modify with some apk in /data/app/ during flash, so i can add more goodies in /system/app/ using this aroma with play store, google sphere and touchwizz i use....see tuto how to move apks from /system/app/ to data/app/ before flash the rom and then gain space on /system/ to flash more files without disturbing /data/app/ we never want to full wipe to.
AND REMEBER external .sh script dont work well with dorimanx new recovery, i mean move choice in aroma so its better to have space in system before use and not use these options during aroma (i mean options to gain space)
thanks.
Troubadour666 said:
i have made one pach with onle play store and google services , with others goodies, but i can re-script it with gapps. give me a way to follow what you think ppl need the most .
i mean this one, but i'm on some research about better way to use it, tomorrow i will post good version.
I9100-Aroma-addonsFor-KitKat-4.4.2-ROMS.zip - 180.81 MB
this one is that one i use in video review, you see i NEVER have trouble with space /system/ partition because initial ZIP ROM is modify with some apk in /data/app/ during flash, so i can add more goodies in /system/app/ using this aroma with play store, google sphere and touchwizz i use....see tuto how to move apks from /system/app/ to data/app/ before flash the rom and then gain space on /system/ to flash more files without disturbing /data/app/ we never want to full wipe to.
AND REMEBER external .sh script dont work well with dorimanx new recovery, i mean move choice in aroma so its better to have space in system before use and not use these options during aroma (i mean options to gain space)
thanks.
Click to expand...
Click to collapse
hi,
i tink there is't problem with micro gapps and free space in system
i have crdroid , 461mb/495mb in system--crdroid is 208mb and was bigger rom (ONLY sokp is 228,but need your gapps)
is possible delete Google home in micro gapps for example(12mb)-any rom have launcher
Amazing.
Keep up the good work my friend.
Vivek_Neel said:
Amazing.
Keep up the good work my friend.
Click to expand...
Click to collapse
i think so too
Hi Troubadour666,
it is weekend and I'm testing on again.
Have just your "Ultimate Aroma Addons for KitKat 4.4.2 and JB 4.1.2 DualBoot Roms" installed and it works just fine.
"S4 settings for KitKat
"S4 TW Launcher BY ANMOL7IFY need 25Mo on system
Can you tell me what is the difference between TW ANMOL7IFY and TW PhenomRom ??
Am still looking for transparent accuweather ??
Regards Klaus
Hello guys,
Today i present you SolarisTrend V6 for the Galaxy Trend Plus S7580
Features:
Prerooted with SuperSu
Added BusyBox
init.d support
Fully Deodexed
Zipaligned
Removed Bloatware
Custom Framework
Performance scripts
Added Viper4android sound
Added stock Google keyboard
Added Apollo music player
Added custom wallpapers
Added custom bootanimation
Custom sounds
Build.prop mods and tweaks
Instructions:
1. Reboot into recovery
2. Wipe data/factory reset
3. flash zip
4. wipe cache and dalvik cache
5. reboot
FULL CREDITS TO @pollog09
http://www.htcmania.com/showthread.php?t=871964
Thanks
FULL CREDITS TO POLLOG09
Thanks to my friend for the traduction and for thread, Im the developer so if someone have any questions here I am :good:
Is it confirmed to work on S7580? I'm asking because on the screenshots it says S7580L and i don't wanna get bootloop on my phone.
It is fully working on s7580. I tried it and no problem.
Download. Please
pella5 said:
Download. Please
Click to expand...
Click to collapse
go to the link of the dev and download from there
Let's try this again, Thread Cleaned and Addressed.
Temp Closed and OP when ready just report your thread for reopening....
HEY REDMENS
TODAY I Proudly present the sound mod of dolby digital for lollipop that is 5.0.x this sound mod generally consits of:
DOLBY DIGITAL MOD
WALKMAN APP
Steps for installing are as follows:
> Reboot to recovery
>click on install
>sELect the zipped file named as: dolby digital+Walkman for 5.0.x
>flash it and reboot to system
>ENJOYYYY
NOTE:AFTER FLASHING YOU HAVE TO DOWNLOAD AN APP FROM GOOGLE PLAY STORE NAMD AS: Selinux Mode Changer and in that app change the selinux mode from enforcing to premissive then only the dolby digital app would be working
ONE MORE THING THIS MOD ONLY WORKS FOR HEADSET AS WE ARE NOT ABLE TO PORT DOLBY MOD WHICH WORKS WITH SPEAKER ALSO TO LOLLIPOP THE DEVELOPMENT IS STILL UNDER PROCESS AND WHEN IT IS OVER I WILL SURELY POST IT HERE
CREDITS
@rohit jaiswal( for testing the mod) @ me :laugh:
THIS MOD HAS BEEN COMPLETELY CHECKED BY ME AS WELL AS BY THE TESTERS
THANK YOU GUYS :cyclops:
There is no walkman app after flashing the zip and the mod doesnt work
Now even the inbuilt Audiofx stopped working.
What's wrong with the mod.
aftabfabs said:
There is no walkman app after flashing the zip and the mod doesnt work
Now even the inbuilt Audiofx stopped working.
What's wrong with the mod.
Click to expand...
Click to collapse
which rom ??
amazing
My friend i m a audio maniac and ur mod just made my night after installing it on my lg g3 32gb via twrp restarted the dolby app started straight away and then i just unzipped the file and installed the walkman app manually and it s fantastic.thank you ever so much
Im using moto g4 plus with stock 7.0
I wanted to install viper but it needs busy box...
I tried installing it using version 54,53,50 but it doesn't work please help me.. please help me to installing busy box in my XT1643..
Or u can help me by providing me with steps for installing dolby atmos for nougat moto g4 plus xt1643...
Waiting for your reply...
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
tywinlannister said:
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. Install the flar2 permissive zip. https://www.androidfilehost.com/?fid=23991606952602503
3. Install Arise Sound Systems zip. https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
Click to expand...
Click to collapse
Flair 2 should be installed from twrp??
Adarsh balu said:
Flair 2 should be installed from twrp??
Click to expand...
Click to collapse
Yes, a flashable zip is to be installed in twrp.
tywinlannister said:
Yes, a flashable zip is to be installed in twrp.
Click to expand...
Click to collapse
Is it working..cuz i tried all the viperfx and dolby atmos available in xda...it was not working for me:crying:
The forum link u have given is very messy and conatins roughly 2000 pages... Do u have a link to the file directly
Adarsh balu said:
Is it working..cuz i tried all the viperfx and dolby atmos available in xda
Click to expand...
Click to collapse
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too. The links are in the OP. Please read the OP of the post before commenting. We can't directly share file links, XDA Rules mate.
tywinlannister said:
Arise Sound Systems, Divine Beats Gaana Edition, Biohazard... all work but need SE Linux to be permissive and Busy Box too.
Click to expand...
Click to collapse
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
@1chrome dude can you look into this, bro? ?
tywinlannister said:
@1chrome dude can you look into this, bro? ?
Click to expand...
Click to collapse
Yes... What to do on that
Adarsh balu said:
I have busy box installed and se linux to permissive...
Let me tell u something about my device...Moto g4 plus...7.0 nougat rooted with latest twrp and elemental X kernel... Xt1643 is model using stock rom
Click to expand...
Click to collapse
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
No my busy box is working perfectly now...I have driver install failed I/O error...
echo92 said:
Which Busybox did you download, and did you open the app to install Busybox as tywinlannister suggested?
Also, what error are you getting, you didn't mention if the error was with Viper or with Busybox?
Click to expand...
Click to collapse
This is screenshot
Adarsh balu said:
No my busy box is working perfectly now...I have driver install failed I/O error...
Click to expand...
Click to collapse
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
echo92 said:
Try downloading/flashing the Viper4Arise Swansong build from the ARISE thread linked by tywinlannister. It's a big clickable SwanSong™ under the 'Meet the Arise team' section on the opening post. You may also find the main ARISE Google+ page a useful resource (e.g. here's someone else with the same error. https://plus.google.com/111150029808118208419/posts/VP2NjJ6hEYc Have a look through the 20 or so comments and see if there's anything helpful in that - ignore the off topic comments towards the end).
Also, check you've got audio_effects.conf and vendor_audio_effects.conf in /system/etc using a root browser. See this post by the ARISE team on their Google+ page. https://plus.google.com/+JasonPasch5/posts/AYUSSo5mG9t
Click to expand...
Click to collapse
I will check it and get back to u..anyway thnq for sharing... Appreciate it :good:
Adarsh balu said:
This is screenshot
Click to expand...
Click to collapse
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
1chrome said:
@Adarsh balu
The issue is probably with Viper not getting Storage permissions. I/O is to do with input and output of data transfer on a peripheral device, which is what makes me think it's that.
See if it has it under Apps > Vioer4Android > Permissions > Storage
It's a wild guess based on logic - could be wrong. Let us know if it works. See if you need to flash another zip. Sometimes that uses to fix issues for me. I always used Viper4Arise not Viper4Android...
Click to expand...
Click to collapse
Yes it was logic...but i have already given permission to storage
Adarsh balu said:
Yes it was logic...but i have already given permission to storage
Click to expand...
Click to collapse
Oh all the best fixing it.
1chrome said:
Oh all the best fixing it.
Click to expand...
Click to collapse
:laugh:
Swansong (Viper4Arise)
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
nazim7 said:
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Same as provided by @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Flash Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip)
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero)
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens, just dirty flash your rom (only wipe cache and dalvik) and everything will be good. :good:
NB: There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
Click to expand...
Click to collapse
Thnq bro let me check it...Can u give me a screenshot of it..
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.