Related
Iam nt responsible for dumb or brick of your phones
Finally succedded in porting to our t2 ultra hurray
Actually I have taken permissions from worstenbrood who ported the dolby digital plus but the port he given disables our original sound enhancement.... But I modified the files and ported to our device
REQUIREMENTS-
1.root
For root check this thread
http://forum.xda-developers.com/sh...m.xda-developers.com/showthread.php?t=2823793
Downloads-
https://app.box.com/s/e5iof5lohshjc7l8mcjhtzhqog6d05jk
https://app.box.com/s/mp26qr7rl8chp38cvji5
INSTRUCTIONS-
1.download the both files from above links
2.first flash the sswork.zip thru recovery from first link and reboot
3.second download dsp manager apk from second link and install as normal apk
Tadaa its done
4.if u want dolby effects to work choose dsp manager in music effects (settings/sound/musiceffects)
5.if u want to stock Sony effects to work choose sound enhancement in music effects (setting/sound/musiceffects)
Plzzz hit thanx if u appreciate my work I hope yu enjoy:beer:
Features-
*u vl feel dolby effect
*merged with mixerspath.xml so u could notice a bit louder sound in phne speaker,microphone
Note-
1.This works only for ear phones bcoz increasing our speaker values may damage our speaker so I make it for only ear phones
2.dont mark any options in dsp manager... Dsp manager is only used wen yu want to use dolby effects
3.if dsp manager forcibly closes disconnect ur phones and reconnect it nd c whether the effects r working r nt
C in my mod our original sound enhancement also working
Op updated on feb19
Works as advertised.
first link is broken, can you reupload?
Sent from my Xperia T2 Ultra using XDA Premium 4 mobile app
Miki89
Op updated nd check my new forum
http://forum.xda-developers.com/showthread.php?t=3041842
pvnsai73 said:
Miki89
Op updated nd check my new forum
http://forum.xda-developers.com/showthread.php?t=3041842
Click to expand...
Click to collapse
Thanks buddy I really like i
Distorted sound
i used the same mod on PAC-Man ROM
The sound is getting distorted after a specific level (speaker and Headphones)
can you please fix this?
lostfurby said:
i used the same mod on PAC-Man ROM
The sound is getting distorted after a specific level (speaker and Headphones)
can you please fix this?
Click to expand...
Click to collapse
Hey man ur using my two mods plz fresh install the rom and go and flash the beatsplusdolby mod I recommend
Works on LP 5.1.1 ?
ABOUT
-Build on Xperia XZ_7.1.1_41.2.A.7.53 firmware.
-XLoud, Clear Phase, Clear Stereo, Stereo speaker while incoming notifications & Ringtone + Stereo speaker in call loud speaker
-Viper4Android for Stock Sony Rom
For Xperia XZ 7.1.1
1- Rooted device needed
2- Flash through recovery
3- For both ( Odex & Deodex )
Info
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
Optional - Viper4Android v2.5.0.5 For Sony 7.1.1 Stock based Rom.
Click to expand...
Click to collapse
Instructions & Download
- Do not install or use amplified system sound, as speaker is already loud enough
- Do not use this Mod with other audio mods
- Make a backup in recovery before flashing this, to restore it later if you want to uninstall this mod
Click to expand...
Click to collapse
Download
Here are Two different kinds of sound mods with viper4Android as optional.
1- Stereo Sound Mod Only
https://drive.google.com/open?id=0B2rIgSq3i4H8Z1dXUm9QQVpsVnM
This Mod will provide you;
- Stereo Mod in Call and Speakers
- Stereo sound while incoming call ringtone & notifications.
2- Stereo Sound Mod with Sony Settings
https://drive.google.com/open?id=0B2rIgSq3i4H8aVhFS0RvR3o4VGs
This Mod will provide you;
- Stereo Mod in Call and Speakers
- Stereo sound while incoming call ringtone & notifications.
- All Sony Settings (XLoud, Clear Phase, Clear Stereo)
Optional - Viper4Android v2.5.0.5 For Sony 7.1.1 Stock based Rom
https://drive.google.com/open?id=0B2rIgSq3i4H8ZHZtMkFidmE2bmc
This Mod will provide you Viper 4 Android only for Sony 7.1.1 Stock based Rom.
Credits
Sony For system files
jimRnor For Project DiVA_MM Kitakami series & his Permission to use
Rajeev For his Sound Mod & Permission to use
ViPER's Audio founded by ViPER520 & ZhuHang.
I want to say thanks to arjun.arora for his sound mod, i learn from his sound mod that how we can code for stereo sound.
Reserved...
Let's try @zohaib0001's mod after Sony Ericsson Xperia™ ARC and Xperia™ Z2 with Xperia™ XZ. Thank you...
Great work.
Thank you for the options.
At the moment I still use viper4android 2.4.0.1 on android 6 on my sony xz. Unfortunately I have that problem that the sound drivers from the nothing turn off. If I open the app then everything goes again. (Connected via headphones)
Update available for 7.1.1 - 199 firmware
hello,
can this be used on the latest 41.2.A.7.8 ?
if no, i would like to request an update
@eddieleon7pc
Mod updated
zohaib0001 said:
@eddieleon7pc
Mod updated
Click to expand...
Click to collapse
Hi,
I'm really interested in this.
Can I ask for your invaluable ideas on:
1) viper4Arise, is it any better or worse then viper4android?
2) Dolby atmos, is it any better or worse then viper4android?
3) Failing any advantages from points 1 or 2 above what setup have you chosen to go with of the 3 options you supply? I would assume viper4android, but I would like to go with what's been tried and tested by the yourself.
I'm typically interested in better voice calls both over loudspeaker & in ear, as well as better music playback levels over loudspeaker.
4) Are you aware of the Viper4Android FX module available through Magisk. Would this be the same or would you advise against this version? If it is indeed the same then perhaps this method would allow for me to try and perhaps remove the mod if need be (easier then restoring a TWRP backup as such.)
Thanks in advance for your time
dillalade said:
Hi,
I'm really interested in this.
Can I ask for your invaluable ideas on:
1) viper4Arise, is it any better or worse then viper4android?
2) Dolby atmos, is it any better or worse then viper4android?
3) Failing any advantages from points 1 or 2 above what setup have you chosen to go with of the 3 options you supply? I would assume viper4android, but I would like to go with what's been tried and tested by the yourself.
I'm typically interested in better voice calls both over loudspeaker & in ear, as well as better music playback levels over loudspeaker.
4) Are you aware of the Viper4Android FX module available through Magisk. Would this be the same or would you advise against this version? If it is indeed the same then perhaps this method would allow for me to try and perhaps remove the mod if need be (easier then restoring a TWRP backup as such.)
Thanks in advance for your time
Click to expand...
Click to collapse
Well I did not try viper4Arise but I try Dolby in past, for me viper4android is definitely better and it’s my opinion only may be other people like other mods.
I have two kind of sound mod
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
And Viper for Android is optional mod that you can use with any one of above sound mods.
Magisk version is same, and there is no difference
zohaib0001 said:
Well I did not try viper4Arise but I try Dolby in past, for me viper4android is definitely better and it’s my opinion only may be other people like other mods.
I have two kind of sound mod
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
And Viper for Android is optional mod that you can use with any one of above sound mods.
Magisk version is same, and there is no difference
Click to expand...
Click to collapse
I had flashed your viper4android a few days ago - but didn't flash either of the other mods.
I was under the impression to flash only 1 of the 3 and not a mixture.
So is it ok for me to flash "2- Stereo Sound Mod with Sony Settings" now, even though I have already flashed viper4android?
Thanks in advance
dillalade said:
I had flashed your viper4android a few days ago - but didn't flash either of the other mods.
I was under the impression to flash only 1 of the 3 and not a mixture.
So is it ok for me to flash "2- Stereo Sound Mod with Sony Settings" now, even though I have already flashed viper4android?
Thanks in advance
Click to expand...
Click to collapse
Yes you can flash over viper
Is anyone using this with magisk installed.
I'm getting bootloop. Just wants to find out if anyone else has had bootloops with this viper4android and magisk ?
dillalade said:
Is anyone using this with magisk installed.
I'm getting bootloop. Just wants to find out if anyone else has had bootloops with this viper4android and magisk ?
Click to expand...
Click to collapse
I am using both, I did not enabled the Viper4android mod in Magisk, working fine.
Working XZ 7.1.1 41.2.A.7.35?
anhsmile said:
Working XZ 7.1.1 41.2.A.7.35?
Click to expand...
Click to collapse
Yes, Fully working
Hi, works on MM? 3.30
ivanmasi said:
Hi, works on MM? 3.30
Click to expand...
Click to collapse
Title says clearly 7.1.1 (Nougat) weird yiu ask for MM, so no !
Verstuurd vanaf mijn F8331 met Tapatalk
working new firmware on XZ?
Clearly working with .53 based firmwares.
Envoyé de mon F8332 en utilisant Tapatalk
I'm not responsible or the developer if something goes wrong with your device..
Your warrenty is avoid now..
Click to expand...
Click to collapse
Hay there, so today i wanna share you a compatible and verry best audio/sound for our K4 Note who have a Nougat based Roms for our devices.
this Dolby Atmos idnt know if work on MM based roms.
Credits:
[email protected]
You can locate this on your Pre-Installed Magisk Manager
How to flash
-Open Recovery
-Wipe Cache/dalvik
-Flash LenovoA7000 DA or Lepro Atmos via TWRP recovery
-after a second.. tap reboot
-wait and enjoy!!!
Dont Forget to Hit Like!!!
UPDATED[03-29-17]
Link Lenovo A7000 DA_r6.5
https://www.androidfilehost.com/?w=files&flid=165966
Link Lepro 3 Dolby ATMOS
https://www.androidfilehost.com/?w=files&flid=165971
rv2.3
- AudModLib v1.3 update push which includes the script addition to allow various audio mods working with SELinux Enforcing
- Remove (audmodlib)service.sh and replace with pos-fs-data(.d) audmodlib.sh, which should fix when root may be lost upon installing certain mods
- Remove force SELinux Permissive post-fs-data script "setenforce 0"
- System install will now have the same script updates as the AudModLib v1.3 to allow to work in SELinux Enforcing
Universal Dolby ATMOS Uninstaller v2.1
https://drive.google.com/file/d/0BxlY-VYiFXU7Zk9zZk1lYndGT3M/view
Version: 2.3
Last Update: 03-26-17
New Update: 03-29-17
Screenshot
UPDATED LINK. NEW VERSION V2.3 and Dolby ATMOS Universal Uninstaller!!!
edarick said:
UPDATED LINK. NEW VERSION V2.3 and Dolby ATMOS Universal Uninstaller!!!
Click to expand...
Click to collapse
I installed zip from magisk but no dolby app is showing in the app drawer
[email protected] said:
I installed zip from magisk but no dolby app is showing in the app drawer
Click to expand...
Click to collapse
Try this
Try to flash it via recovery..before that download ahrions universal dolby uninstaller..then flash dolby atmos a7000v2.3..
If your problem is still exist..flash dolby atmos worstenwood version
Audio control is still under default audio fx
Yesterday i flashed dolby atmos on my k4 note( resurrection remix 5.8.5) but the audio control is still under the default audio fx... Please help
edarick said:
Hay there, so today i wanna share you a compatible and verry best audio/sound for our K4 Note who have a Nougat based Roms for our devices.
this Dolby Atmos idnt know if work on MM based roms.
Credits:
[email protected]
You can locate this on your Pre-Installed Magisk Manager
How to flash
-Open Recovery
-Wipe Cache/dalvik
-Flash LenovoA7000 DA or Lepro Atmos via TWRP recovery
-after a second.. tap reboot
-wait and enjoy!!!
Dont Forget to Hit Like!!!
UPDATED[03-29-17]
Link Lenovo A7000 DA_r6.5
https://www.androidfilehost.com/?w=files&flid=165966
Link Lepro 3 Dolby ATMOS
https://www.androidfilehost.com/?w=files&flid=165971
rv2.3
- AudModLib v1.3 update push which includes the script addition to allow various audio mods working with SELinux Enforcing
- Remove (audmodlib)service.sh and replace with pos-fs-data(.d) audmodlib.sh, which should fix when root may be lost upon installing certain mods
- Remove force SELinux Permissive post-fs-data script "setenforce 0"
- System install will now have the same script updates as the AudModLib v1.3 to allow to work in SELinux Enforcing
Universal Dolby ATMOS Uninstaller v2.1
https://drive.google.com/file/d/0BxlY-VYiFXU7Zk9zZk1lYndGT3M/view
Version: 2.3
Last Update: 03-26-17
New Update: 03-29-17
Click to expand...
Click to collapse
i installed resurrection remix rom in my lenovo a7010a8 (k4 note)....now how can i get dolby in this rom....i checked in magisk module but its not provided there....
After installing this it shows in app drawer but not working. Please give me a solution
Mobile- Lenovo K4 note
aosp 4.1 Nougat
edarick said:
Screenshot
Click to expand...
Click to collapse
hi, uninstall dolby universal is not working,,pls provide valid link
Installation :
Just Flash Both Mod & Dolby (Necessary) In Recovery
Note: Ensure That Phone Rooted Properly Because Dolby Required Root (Magisk Best For root Solution)
Uninstallation:
There is no uninstaller may be available in future, so take a backup before doing anything.
Version 3.7 (New)
https://drive.google.com/file/d/1OYxoc7Y74L9-eS0D9E-S8swoBJqeznZE/view?usp=drivesdk
Version 3.6 (Old)
https://drive.google.com/file/d/1-lpgMfQSQ7vpnEE_qGQ9XdP0ePn58NFj/view?usp=drivesdk
Version 3.5 (Old)
https://drive.google.com/file/d/1xlH6J-RQa6tGhoYZtro6G3e3Fk3p5qXi/view?usp=drivesdk
Flash Dolby Over Mod, Its Necessary
https://drive.google.com/file/d/1bGhYcRq0kRU_GYtoENqYzh2X-mBrGQbv/view?usp=drivesdk
Changelog:
V3.7
*HTC10 - This version fixed, Now you can hear sound from earpiece as well as speaker
*Increased and improved sound quality for both speaker and earpiece in htc10 mod (Extreme Version)
*Stereo mod - call sound quality improved and also audio quality when music playing
*Stock mod - same as earlier....
Use Dolby Its Recommended for HTC10 Mod with given dolby settings as below
My Personal Dolby Atmos™ Settings :
Music
Volume leveller - off
Graphic Equalizer - Leave it default
Intelligent equaliser - open
Bass Enhancer - off
Dolby Surround :
Music
And If you have Beast™ kernel then you can increase volume even more in kernel adiutor
Speaker Gain - (+4 to +7) will be safe
Thanks to,
@ScreaMySkrillEX
@amarullz
@guitardedhero
If You like my Work then plz press the like button
PrasadSable said:
Installation :
Just Flash Zip in Recovery
Download Link:
mega.nz/#!6YwkAZjS!UoYEv8eRL1aKF9405LDlE56X7cO8RdQOBfnik0n Bjj0
Click to expand...
Click to collapse
Link is not correct
Thanks! Link Updated
Notworking. No sound from earpiece and in recovery the install screen showed up upside down, so we r not able to use the touch screen .binstall using volume button and poer button.
flash123nani said:
Notworking. No sound from earpiece and in recovery the install screen showed up upside down, so we r not able to use the touch screen .binstall using volume button and poer button.
Click to expand...
Click to collapse
Try now download new updated version and send feedback ,if works then press the like button
https://drive.google.com/file/d/1Zqgikmv7zU5lOW2XMnOr3Jkmx4wGTMvG/view?usp=drivesdk
Still thumbs down. I tried this one also but no sound from ear piece
Good work......
PrasadSable said:
Installation :
Just Flash Zip in Recovery
Google drive link: Updated
https://drive.google.com/file/d/1Zqgikmv7zU5lOW2XMnOr3Jkmx4wGTMvG/view?usp=drivesdk
If you want even more Volume then flash dolby
https://forum.xda-developers.com/attachment.php?attachmentid=4365169&d=1513721346
My Personal Dolby Setting
Music
Volume leveller - off
Dialogue enhancer - off
Intelligent equaliser - open
Thanks to,
@ScreaMySkrillEX
If You like my Work then plz press the like button
Click to expand...
Click to collapse
Great work......thanks...
Dont work
On the newest pixelexperience rom it works nice
Don't work.
Pixel rom feb 2018 ver.
I have to restore system partition.
Better release a uninstall files. 3.4 screwed my rom. Need to re flash again. Not dare to test it again for 3.5
通过我的 Z2 Plus 上的 Tapatalk发言
Working on AEX 5.2. Dirty installed over previous build (3.0, I guess). No aroma installer on this new build, no options to choose from.
EDIT: I have the latest Ainur Sauron audio mod in Magisk and AIMP app as media player.
johnnyjoe said:
Working on AEX 5.2. Dirty installed over previous build (3.0, I guess). No aroma installer on this new build, no options to choose from.
Click to expand...
Click to collapse
For me not working at all, after install no sound.
bordi21 said:
For me not working at all, after install no sound.
Click to expand...
Click to collapse
Me too on AEX 5.2
Working on AEX 5.2. Dirty installed over previous build (3.0, I guess). No aroma installer on this new build, no options to choose from.
I have the latest Ainur Sauron audio mod in Magisk and AIMP app as media player.
both v3.4 and v3.5 working for me on jaguar
but is there any way to edit this file for louder earpiece volume? even though it's dual speaker now the earpiece volume is still too small to leave any impact
3.4 version work perfectly on my device - latest aex 5.2 with latest ARKernel dirty flashed from shox 1.4 version. but i have found a bug, when i receive phone call, loud speaker is automatically activated even though the icon on my screen shows the earpiece mode.
now i want to try 3.5 version. thank's a lot for your mod. Good Job \m/
I m on PE Rom and it worked fine but where can i change thae settings
---------- Post added at 11:44 AM ---------- Previous post was at 11:41 AM ----------
What is the best settings
Cant the ear peice be more loud .
Its not making that much of deference.
Did any one know how to make it loud
How to uninstall this 2 mods?
Salam and hello everyone, ive edited mixer_paths_mtp from oreo 8.1 and made a magisk module for Dual Speaker SoundMod (vince) [AOSP PIE ONLY] .
read carefully, [AOSP PIE ONLY!!!]
check #2 post for latest AOSP Pie , AOSP Q and Miui11 Pie Vince updates
first flash magisk module.
(if dual speaker not working for you after reboot, proceed manual steps below)
then
paste manually the edited mixer_paths_mtp.xml into root/system/vendor/etc - using root explorer/mixplorer or other file manager
(copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere you like, rename the edited mixer_paths_mtpMODI.xml to mixer_paths_mtp.xml
then copy and paste it into root/system/vendor/etc. change permissions to 644 (rw- r-- r--), after that reboot your phone.)
try listen to the dual speaker.........
*its working for me, tried on latest PE and Havoc 2.7
*forgot to mention, i also flashed audio modification library too. (download from magisk) if dualspeaker already working for u guys just ignore.
Please try and give me feedback.
also careful on the volumes for u guys that
already got audio enhancer such as viper/dolby etc. installed.
your phone, your risk
Thank u very much...
Magisk
https://drive.google.com/file/d/1-1C4w0OV8Eyzl1jq1Xj1FH-DgBzKQQfE/view?usp=drivesdkanual
Manual
https://drive.google.com/open?id=1-6fhdJ_V3nNxaiC_MTJrhmspZJaWWfQd
Tutorial Video ( i forgot to"copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere" in the video)
https://drive.google.com/file/d/1J1fb_Z9mBXu6p7-USO464fHLDWg6z3K0/view
VIPER4Android FX v 2.7.1.0
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that or download here
https://drive.google.com/file/d/1-ewer6lRMSOMPzq1issS520rJEr3QCsZ/view?usp=drivesdk
or zackptg5 website https://zackptg5.com/android.php
-after that find viper4android.apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android.apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud (for me). so i edited and create the kustom profile.
-load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Credits :
Allah The Almighty
source code @Dante63
oreo mod @rashidmalyk
Latest
October 30 2019
-sharing my last dualspeaker work for vince, moving to a new phone.
-Miui11 Pie Vince only DualSpeaker Mod
Magisk
https://drive.google.com/file/d/1-9w5X_Z6TybdB8jeMeQHE0ZMvg45BIBo/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-DMiJNzTrjJhUwqbqUx9BAf803TGsKma/view?usp=drivesdk
October 2nd 2019
For Q, u can use the September 3rd 2019 Pie mixer file below for dual speaker mods.. better use manual method for now, and i didnt test any audio enhancer yet. but can confirm that dual speaker is working...
thanks
September 26th 2019
* just a little guide to make sure your dual speaker working...
-the original mixer file size for aosp pie is 62.48kb, the file ive edited is 63.71kb, so if u see your mixer_paths_mtp.xml in root/system/vendor/etc is 62.48kb apply manual method again and reboot. u need to have the 63.71kb mixer_paths_mtp.xml file in root/system/vendor/etc to make your dual speaker working. hope this will solve your "not working dual speaker issue".
September 3rd 2019
Enhanced Version DualSpeaker Stereo Mod For Vince (AOSP Pie) Extra Careful On Volumes, Especially For Audio Enhancer User
*created from latest aosp pie rom mixer file(august security patch rom)
*for this file 1 ive put nearly max setting on all speaker output and edited a few lines for headphone in the mixer file.
*the purpose? to enhanced bass sound, better stereo mod from both earpiece and main speakers.
Magisk
https://drive.google.com/file/d/1-S6CJEhjyNVQzT1KJlYYEW4Z-IlQLmjE/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-YYO30j491GXNtiZ1K22TOOWRiqEQhh9/view?usp=drivesdk
#tried on vince Android Q gsi, working
*as usual need to use both method, i will not create anymore magisk module or fix current magisk module. if anyone willing to help to make working magisk module, please do so and share here.. thank you very much
not working with magisk, tried the manual method.
working :victory:
thanks @ninken84 :good:
got pms and replies..it seems that magisk module not working for some pie custom roms, i dont know how that happened bcoz i use the same file that ive edited. so, if anybody had the same issue then i suggest just use both magisk and the manual method bcoz it will be fine. thanks
Can you make a video for me? And Salam you
SonyThEgAMaer said:
Can you make a video for me? And Salam you
Click to expand...
Click to collapse
pmed.. thanks
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
nice..good to hear bro :good:
thanks for the feedback
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
XxXxXx121212 said:
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
Click to expand...
Click to collapse
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud for me. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
ninken84 said:
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
counter100 said:
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
Click to expand...
Click to collapse
nice bro :good:
ear for earspeaker/earpiece,
but there r a few other lines also need to be edited there too for earspeaker.
i put 90 for ear speaker.max is 95 so becareful bro. cant guarantee
i suggest u watch dante63's tutorial first
https://youtu.be/Su9Af-jrJWQ
not working with ainur sauron or narsil? even after installing aml?
obliviousryuk said:
not working with ainur sauron or narsil? even after installing aml?
Click to expand...
Click to collapse
sorry bro, i dont know bout this. never tried ainur sauron or narsil before.
can u give me the download link,i want to try it too
ok, just tried ainur sauron.
flashed ainur sauron MK III (27.05)
checked root/system/vendor/lib/soundfx and root/system/vendor/lib64/soundfx
the files installed there.
to make it working need a manager, so i download and flashed Ainur JamesDSP v2.2 .
rebooted, open music, open JAMESDSP Manager. tweak it... and yes, its working.
*ive checked that dual speaker already working before i flash the JAMESDSP manager
*flashed without viperfx/dolby
download the manager at magisk Ainur JamesDSP v2.2 or here https://zackptg5.com/android.php
try and give feedback.. thank you
Good
Is it works for pixel caf rom
srinu1997 said:
Is it works for pixel caf rom
Click to expand...
Click to collapse
try it bro. and yes, its for aosp pie android 9 .
Its not working in havoc 2.8 there one deference in file name you say mixer_path_mtp.XML in hovec 2.8 have mixer_path.XML I try to rename like havoc but not sound?