Develop Bugs

[Q] Band Handover/voice network issues

So I have been waiting patiently for the 4.3 update to roll out to me OTA with hopes that it would fix my issues but my phone has been saying download interrupted and so I have gone back to completely stock and triangle away to get my device status back to normal but it still wont let me download. When looking around for other possible causes I saw that my build number is JRO03L.I747UCDLK3 which comes up as a build number for a nexus 7, the correct build number for my att should be JRO03C. I have no idea how it got that way but I am wondering if the person who bricked it might have put the wrong version of the bootloader or some other part of the firmware on and it somehow didn't brick but is detecting a conflict and not letting me OTA. Or that is what is causing my cell network issues as well. Wanting input from a a few devs as I am not 100% sure what the first part of the build number represents.
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for tag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.

Bump
Bump!...not looking good.

madnesshero86 said:
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for Jtag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.
Click to expand...
Click to collapse
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail

Tried
View attachment 2362929
winosxbuntu said:
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail
Click to expand...
Click to collapse
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?

madnesshero86 said:
View attachment 2362929
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?
Click to expand...
Click to collapse
I think I can help, I just need to pull up some files and I might get you the software or program I used to back -up and restore my EFS folder/files
Even fix it, so plz hang in there........will report back later on

Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

madnesshero86 said:
Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
this is the software/programme i used to back-up, recover or even fix my EFS files (if they are corrupt and can be used) NV items reader writer
type it on google and pretty sure you will find something , try different links and again am sure you will find a download
have you tried flashing the new 4.3 stock firmware and modem follow this link for everything http://forum.xda-developers.com/showthread.php?t=2498233 or you can wait for AT&T to release the official 4.3 firmware and that will be 100% satified to be stable and will fix all your EFS/IMEI problems FOR GOOD :laugh:
i have the NV items reader writer software that can fix your problems but i dont know how i can share it with you without breaking any rules
ULTIMATE/final solution send it to MOBILETECHVIDEOS and will fix it like its nothing, take it to samsung and have to play some ball, or BUY A NEW PHONE
tried kernels (idont think it will make any difference) but its good to check

I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

madnesshero86 said:
I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
NV items reader writer
type exactly as it is on google or here on XDA

New Info
See new info in OP Please, and before anyone says anything I have spent half the day searching with various keywords trying to find a fix so be kind if it seems obvious to you, I couldn't find it and I did try.

Bump

[Q] CM11.0, 20140608, M7 Snapshot - Unable to get signal from radio

I started to experiment with different custom ROMs available for the d2att (now, apparently called the d2lte). My phone is using TeamWin 2.6.3.1 for recovery, I have been using it for everything. So far I have only been familiar with two certain ROMs: Cyanogenmod and CarbonROM. I have not flashed anything except for the recovery.
I complete the installation of my new ROM by first wiping cache, dalvik, data and system. My ROMs are stored on an external SD.
CarbonROM was the first one to be installed, but I found it quite buggy and unstable. I have since been using different snapshots of CM to test functionality and stability...since I plan to hang up my LG G2 and start using my SGS3 w/7200mAh battery as my daily phone. So it needs to be very reliable. I also enjoy picking with settings so the more settings the better.
So, question number #1:
When I install CM the normal way, add my APN, and select the proper mobile network mode, how come I cannot get a signal, no matter what I try? I have searched around many forums for the answer to this...many have nothing to do with my problem or are using different phones. I can confirm my SIM card works, as it was used in my LG G2. Carrier is Virgin Mobile Canada. Network mode is GSM/WCDMA Auto. It does not work with any other modes including Global.
Q #2:
If I plan on using custom KK (4.4.2) ROMs, is there anything extra I need to flash to the phone in order for the cell radio to work successfully? When I researched this, I found lots of people talking about flashing a custom bootloader, but I could not find an exact answer to my question. I would rather not brick my phone by attempting this blindly.
Q #3:
Since I am looking for a reliable custom ROM, is CM the best developer to choose? Is there a more reliable ROM out there?
Mike
EDIT: I did more reaseach on bootloaders and modem firmware and found that my bootloader is already at the most recent version. I did find however that my modem firmware was out of date, so I updated from UEMK5 to UEND3. This however did not solve my problem as I still have no service...
I am contemplating now about starting from scratch and wiping my internal storage... will this help or is it unnecessary?

For question # 1, do you have a proper imei after installing CM11? You can check it in the dialer by typing in *#06#.
For question #2, the modem must be compatible with the bootloader. Custom ROMs will only install if the phone has a compatible bootloader.
For question #2, I prefer Validus which is an AOSP-based ROM.

audit13 said:
For question # 1, do you have a proper imei after installing CM11? You can check it in the dialer by typing in *#06#.
For question #2, the modem must be compatible with the bootloader. Custom ROMs will only install if the phone has a compatible bootloader.
For question #2, I prefer Validus which is an AOSP-based ROM.
Click to expand...
Click to collapse
I have an IMEI number. That is what has me kind of confused...everything is there to show signal, it's just that it will not pick up a tower. When I throw a SIM card in it recognizes it. One thing to also mention is it pins the signal at 0, -1, or 258692378... or another outrageous number.

First things first have you followed the method of going back to a stock TW ROM, obtaining a GPS lock, and then flashed your Custom KitKat rom?
Sent from Mission Control

UnknownTroll1 said:
First things first have you followed the method of going back to a stock TW ROM, obtaining a GPS lock, and then flashed your Custom KitKat rom?
Sent from Mission Control
Click to expand...
Click to collapse
I am now on stock 4.3 firmware. I have obtained a GPS lock.
No service at all.
But... I had a funny feeling, so I went into stock android recovery and wiped cache...and voila, service!
Only problem is, I'm losing it almost constantly. The only way to fix it is by wiping the cache, but I can't keep doing that whenever I lose service.
Will I be okay to flash the custom recovery and custom ROM at this point?

Do you have the latest modem installed?

mpelley92 said:
I am now on stock 4.3 firmware. I have obtained a GPS lock.
No service at all.
But... I had a funny feeling, so I went into stock android recovery and wiped cache...and voila, service!
Only problem is, I'm losing it almost constantly. The only way to fix it is by wiping the cache, but I can't keep doing that whenever I lose service.
Will I be okay to flash the custom recovery and custom ROM at this point?
Click to expand...
Click to collapse
If you are still on the Stock TW ROM here is a method to try. It will clear most of your mobile data problems.
1. Enter the Samsung service mode by typing this code into the dial pad *#197328640#
2. Then go to Mainmenu>UMTS>Common>NV REBUILD>NV REBUILD> (Important: don't exit the menu yet!)
3. Wait 30+ sec
4. Long press power button and select "Restart / Reboot"
5. Now check your GPS from any software that may use GPS like "Maps" or "GPS Status"
Credit: S3Rx ROM Development Thread.
EDIT: Afterwards you should be good to go on your custom ROM. This issue seems to have arisen when a d2lte build broke most people's LTE/Mobile data.
Sent from Mission Control

UnknownTroll1 said:
If you are still on the Stock TW ROM here is a method to try. It will clear most of your mobile data problems.
1. Enter the Samsung service mode by typing this code into the dial pad *#197328640#
2. Then go to Mainmenu>UMTS>Common>NV REBUILD>NV REBUILD> (Important: don't exit the menu yet!)
3. Wait 30+ sec
4. Long press power button and select "Restart / Reboot"
5. Now check your GPS from any software that may use GPS like "Maps" or "GPS Status"
Credit: S3Rx ROM Development Thread.
EDIT: Afterwards you should be good to go on your custom ROM. This issue seems to have arisen when a d2lte build broke most people's LTE/Mobile data.
Sent from Mission Control
Click to expand...
Click to collapse
I am still unable to get service. This time it is pinned at -113. I am although, registered on a network. Not able to make calls or text.

mpelley92 said:
I am still unable to get service. This time it is pinned at -113. I am although, registered on a network. Not able to make calls or text.
Click to expand...
Click to collapse
Yea at this point I am stumped. I guess its a hardware issue. But before calling quits what is your baseband and boot loader?
Sent from Mission Control

UnknownTroll1 said:
Yea at this point I am stumped. I guess its a hardware issue. But before calling quits what is your baseband and boot loader?
Sent from Mission Control
Click to expand...
Click to collapse
Bootloader and baseband: I747MVLUEMK5

mpelley92 said:
Bootloader and baseband: I747MVLUEMK5
Click to expand...
Click to collapse
You're running the most recent release so I'm not sure what's causing the issue.

audit13 said:
You're running the most recent release so I'm not sure what's causing the issue.
Click to expand...
Click to collapse
I have found the problem with the service. I live in an area where signal is not too great. My LG G2 has a tendency to pick up the correct tower for my area, but my Galaxy S3 does not choose the same tower... It looks for one in a completely different direction.
Forgive me, this thread is going to take a bit of a turn.
Is there any way to choose which cell tower the phone connects to? In my area there is one directly east and the other is directly west. I need the western tower in order to make/receive calls/text and in order to get any data reception. Right now where my phone sits, it does not connect to the western tower so I cannot use it. I used OpenSignal to observe which tower both phones connect to.
The other issue I found is my extended battery (Anker 7200) also interferes with reception quite a bit. In town, it's not noticeable. But out on my acreage it stops my phone from getting any signal. I compared it to my LG G2 and my Galaxy S3 with the old 2100mAh battery. The G2 hovers around -95, S3 w/OEM battery at -101 and the S3 w/Anker battery at -113 (no service).
Mike

mpelley92 said:
Is there any way to choose which cell tower the phone connects to? In my area there is one directly east and the other is directly west. I need the western tower in order to make/receive calls/text and in order to get any data reception. Right now where my phone sits, it does not connect to the western tower so I cannot use it. I used OpenSignal to observe which tower both phones connect to.
Mike
Click to expand...
Click to collapse
Try changing the mode to LTE only under your settings. This may force the stronger connection.

x0ne215 said:
Try changing the mode to LTE only under your settings. This may force the stronger connection.
Click to expand...
Click to collapse
Unfortunately that won't work either. In my area I can only pick up HSPA....

mpelley92 said:
Unfortunately that won't work either. In my area I can only pick up HSPA....
Click to expand...
Click to collapse
Hmm. Out of curiosity, have you tried a different ROM on 4.4.2? I've had weird issues with ROMs and signal, ie MIUI caused me to have my signal cut in and out at random intervals. Worth a shot at least. I've been using SlimKat if you want one for reference (probably the quickest download due to size).
Unfortunately all I can suggest is trying to play with tasker and seeing if you can get it to skip over the crap tower, but to my knowledge there's no way to prevent connection to said tower.
I guess if you wanna get into a gray area you could modify said tower....but I claim no responsibility for your actions with that

x0ne215 said:
Hmm. Out of curiosity, have you tried a different ROM on 4.4.2? I've had weird issues with ROMs and signal, ie MIUI caused me to have my signal cut in and out at random intervals. Worth a shot at least. I've been using SlimKat if you want one for reference (probably the quickest download due to size).
Unfortunately all I can suggest is trying to play with tasker and seeing if you can get it to skip over the crap tower, but to my knowledge there's no way to prevent connection to said tower.
I guess if you wanna get into a gray area you could modify said tower....but I claim no responsibility for your actions with that
Click to expand...
Click to collapse
I've been using Liquidsmooth the past few nights and am losing signal more than ever.
Would the OS control how the modem is used? I would think that it's hardware only that changes how and when you get service.
I'm going to try the UEND3 modem firmware and see if that makes a difference. Also going to try SlimKat like you suggested.

How to restore d550 software??

So in a moment of stupidity I somehow was able to install a D855 rom on my AT&T D850 phone. Turns out these roms wont let me hear my phone calls and continually drop my data connection and cell service. Turns out I made another stupid mistake and forgot to make a backup of my phone . So I tried to do a factory restore back to D850 using the LGflasher method and I can't because I now have the D855 software on it and so I'm now stuck without the ability to make phone calls or have a reliable data.

bonkieash said:
So in a moment of stupidity I somehow was able to install a D855 rom on my AT&T D850 phone. Turns out these roms wont let me hear my phone calls and continually drop my data connection and cell service. Turns out I made another stupid mistake and forgot to make a backup of my phone . So I tried to do a factory restore back to D850 using the LGflasher method and I can't because I now have the D855 software on it and so I'm now stuck without the ability to make phone calls or have a reliable data.
Click to expand...
Click to collapse
What exactly have you flashed on your phone? Bump, root, KDZ/TOT file?
If you want to go back to stock you could either follow the guides on the forums or flash a .tot/.dll on your device, that way you get stock recovery, boot and rom etc..
I could link you the guides, but they are all in general forum or on Google
Good luck

So I used iOroot to root and then bump to put twrp on my phone. Then I decided it would be smart to flash the AndriodNow rom and then later the SphinX rom. I have tried to go back to stock but the lgflasher thinks my phone is a d855 because of the roms I flashed on it.

[Q] Connection Issue with Mobile Data - Modem Problem

I've run into a bit of a pickle with my root attempt on one of my LG G3s. The first went without a hitch while the 2nd didn't go so well. In order to flash CM12, I followed the LG G3 stock flash guide from hyleton to downgrade from Lollipop to 4.4.2. I then flashed CM12 with TWRP and hit a snag where the mobile data connection would try to establish, and the phone would black screen requiring me to pull the battery. The only way to get passed the CM12 setup would be to boot without the TMO SIM card.
Because I considered this a failed port, I flashed back to stock 4.4.2 but can't connect to the TMO mobile data network, but I am successfully able to get passed initial setup with the SIM Card in. IMEI and mobile number are still registered to the device, so at this point I'm assuming the issue is with a bad modem flash that occurred when I went back to stock 4.4.2. When I check the baseband version, the number/letter combo is quite large and doesn't seem to match with your typical Baseband versions, hence why I think I have a corrupt modem.
I can't find any modem software packages out there for the US TMO LG G3 variant, so was hoping someone could point me in the right direction or otherwise help provide some guidance on how to get my data connection back.

Hey,
I've got the exact same problem. Did you manage to repair it?
Thanks.
C.

You could try asking for a modem package for your variant here on the forums, otherwise you could try a custom ROM and wiping everything even the modem before flashing, most ROMs come with a modem built in.

Network configuration corrupt with Cyanogenmod backup.

Hello, so here is my problem. I have been using Cyanogenmod 13 on my LG G3/ls990 for months now. Recently I needed a static IP address through Sprint. When they applied the static IP to my account, I was stuck on 3G, even though I mostly have LTE. Basically what I did was use an old stock rom backup to update my PRL/Profile. This brought back my LTE service. Then I reloaded my CM13 backup. Unfortunately, at first it didn't recognize my sim card, and then it only recognized 3G. Okay, so no problem, I decided I would just go back to the stock rom and clean install a new custom rom. Unfortunately, when I went back to the stock rom, it was also stuck on 3G and this time when I tried to update the PRL/Profile it didn't work, I am guessing because it already saw these as updated. So after a few chats with Sprint's tech support, I was able to get LTE to work again. She said a particular network configuration file wasn't working right, and she did something which was suppose to fix it. As instructed, I typed in code ##72786# after she did it, and LTE worked perfectly. Stupidly, I thought it would be as simple as reloading my CM13 backup. Yet it did it again when I loaded the backup, and now I am stuck on 3G again. Before this I didn't really connect the two together. Does anyone know what exactly is happening here? Tomorrow I plan to call Sprint again, to get them to fix the file, but is there a way I can do it myself, in case I have this problem again when I install a new custom rom? For example, if I go into ##Data# will I fix things by changing a setting in there or something? I hate having to talk to Sprint every time this messes up, and yeah, I know it was stupid of me to do the same thing twice, but it was a day apart and I forgot what I had done the first time. Hopefully whomever I talk to tomorrow can figure out what the woman I spoke with did, because she definitely knew what she was doing. Thank you for all of your help!

Update: Called Sprint they reset my network and I have LTE again. I am somewhat wary of installing a new rom but would like one for resolving performance issues and wifi tether. I downloaded an unofficial Lineage 15 Rom yesterday while I was on 3g only, but it couldn't find my sim. Is there a way to backup my current network settings?

Update 2: So I just tried a fresh install of Lineage 15 and it didn't work. First it recognized cell but no data. Then I went into data settings chose carrier settings that crashed, "android.com. [something]has stopped working" , the sim was unrecognizable after that and the carrier settings weren't there any longer. I backed up my EFS partition in the stock rom before installing, but then I was stuck on 3g even despite that. I called Sprint again, and got them to reset my network settings. Don't want to keep calling them though.
Anybody here with Sprint and a static IP that can recommend a ROM that will work and not mess up my network settings? I don't care if it is Marshmallow or Nougant, I just want something that doesn't overheat my phone and which I can have native tethering.
EDIT: I was able to install Fullmics and retain my LTE.