I overclocked my BA from 398mhz to 531mhz, I am wondering if when I goto file > exit, it still runs at 531mhz, or it only runs at 531 when the application is opened "minimized", also when I restart my phone its set back to 398mhz unless set to 531 , anyone help?
When you exit PHM, your device goes back to original speed, so does it when you restart (unless you check the 'start automatically' option in settings).
This is very good for calibration battery in your new system
1. Turn on Wifi and connect on your network..
2. Turn on Bluetooth
3. Add Music widget on your desktop and play anything
4. Set volume on highest, and put it deep under feather bed because it will be very loud
5. Download any very very big file with Browser (e.g. files from Rapidshare or Megaupload)
6. Set Screen Timeout on "Never Timeout"
7. Set Max Brightness
8. If you can. Put Camera widget on your HomeScreen
9. Run Google maps and go anywhere in that
Optional (but very effective)
1a. install any FTP server (e.g. SwiFTP below FTPs)
Config it - OK - and hit Start
From your computer connect to your Phone with FTP client.
In your phone show iP on FTPs homescreen
And Download many files from your phone.. you can copy music to phone or to computer..
1b. you can download THIS tiwlan.ini (Its'nt my. So thanks to author)
Run Terminal and write this:
su
rwsystem
cp /"source"/tiwlan.ini /system/etc/wifi/tiwlan.ini
You need restart your wifi.. So Turn off Wifi and Turn on again.. This is for higher consumption.
If you have problem with anything, PM me and i can help you
If you know some more tweaks so write it..
So GL
Reserve for me
Hi. I'm a fun of yours work on Samsung Wave. I come here to ask if is possibile to create a program that automatically delete the gps+ data.
I have the JL2 unofficial fw on my Wave and I checked that, without a manual delete data + gps, they are not downloaded. It 's always necessary, any time, enter the secret menu (*#4097*4097#) and manually delete the data.
It would be possible to build a tool able to do this procedure automatically and, perhaps, start Route66 in the same time. In short, do everything with one click. With this settings the fix of our Wave will be always in the order of time of 20-30 seconds. It's possible in yours opinion?
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
pockobg said:
Why do you need to delete any data? I've installed Sygic and i get a lock after about 10-20 sec ....
Click to expand...
Click to collapse
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Nezmanpro said:
Is difficult to explain the situation. I use Ruote66 and fw JL2. I haven't a flat plan on phone and I use wap configuration. I think isn't a problem of Ruote66 but of the internal settings of gps. In my case, if I don't used the gps from a week, the fix is slow (12 min). I have active gps+ but the download doesn't run automaticaly if I delete gps data.
Click to expand...
Click to collapse
So this is a problem for Route66? Why dont you try Sygic?
pockobg said:
So this is a problem for Route66? Why dont you try Sygic?
Click to expand...
Click to collapse
Becouse I buyed Route66. I want use it and not another software.
Question: Can you give me the fw in your Wave and the setting in secret menù of gps (*#4097*4097#)? My interest is for "gps type" and the value of "time - out" in the "application settings". Thanks
Time out - 60000
GPS Device-Type - HYBRID
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
duxxyuk said:
I found that setting a timeout to 1000 worked a little better but effectively deleting the data gets it going more quickly. That is after setting up the system correctly in the first place.
Sent from my Hero using Tapatalk
Click to expand...
Click to collapse
I use this settings:
gps mode: standalone;
gps option: location+ velocity + altitude;
session type: tracking mode;
gps device - type; build - in;
data receive..: All;
time out: 60000 (change to 1000);
Horizzontal Accuracy: 1000;
Vertical Accuracy: 500;
I tryed to use the hybrid type of gps, but my apn doesn't support traffic of data. So I set built - in and it's ok if I delete gps data. Now, the most rational solution is waiting a new fw that, perhaps, will solve this problem but my idea is easy and can give to all those who use route66 an immediately solution.
So, there is anyone that can realise this application? Is possible?
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
duxxyuk said:
Here's how I got mine working correctly. (effectively I finish with Nezmanpro's settings as well)
1. Dial *#4097*4097#
2. Choose 3-User setting
3. Choose 1-Assist Method Type then select AGPS. System will reboot.
4. When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097#.
2. Choose 3-User setting
3. Choose 2-SUPL Setting and set the options as below
Use AGPS or NOT = On
MT-Auto Configuration = Off
SUPL MT-Response Type = Accept
Server Address Type = IP_ADDRESS
Server FQDN Type = Custom Config (this was originally BMC LIVE TEST )
SUPL Secure Socket = Off
Server IP Address = 74.125.77.192
Server Port = 7276
I then go back up to "Server Address Type" and set that to "HOST_NAME". I can then set Server Custom FQDN = supl.google.com
I think there's a bug here as the port should also be available when using a host name - when choosing host_name the port field is locked, that's the reason behind going back up and changing the "Server Address type".
Save this. then go into 4-Network Profile
4. Set the network to the one you use for your internet access, not the mms.
5. Check that in the PDR Setting all is checked.
6. Go back to the main menu of LBS Application then select 2. Application Setting
7. Set the following options:
GPS Mode = A-GPS CP Based
(See the following post for further info http://forum.xda-developers.com/showthread.php?t=729118)
GPS Option = Location+Velocity + Altitude
Session Type = Tracking Mode
GPS Device-Type = HYBRID
Date Recieve Type = All
Time Out = 1000 (like Nezmanpro)
Horizontal Accuracy = 100
Vertical Accuracy = 500
8. I then go back into User Setting
9. Back into Assist Method
10. Set Assist Method Type = GPS+
System will restart
11.When the phone boots and returns to idle mode (after entering pin and checking the SD Card) dial *#4097*4097# to get back to the LBS Application.
12. Go back into 3-User Setting
You'll see that SUPL settings are no longer present.
13. Go into GPS+ Setting and check that Auto Download = Enabled
14. Go back to the LBS Application menu then 6- DELETE GPS DATA
16. Happy navigation. Phew
Click to expand...
Click to collapse
Ok. But you must always manually delete gps data after this operation? I Knew that this operation was for functionally to have more speed to data download but my problem doesn't solve, becouse you must always delete gps data. Or not?
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
duxxyuk said:
In order to get a fix quickly - ahem - in less than 3 minutes I need to delete the gps data.
Compared to a HTC hero I have the impression that the phone has no A in GPS.
the HTC hero locks in under 30 seconds the wave in under 3 minutes.
Click to expand...
Click to collapse
An application that auto deletes the gps data would fix this problem.
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
bsbharath1987 said:
So the Wave does not use network assisted GPS? Then those Application settings in the GPS menu do not make sense other than the Standalone mode?
Click to expand...
Click to collapse
Having deleted the gps data this morning. I put the phone in 3G mode... gps lock in under a minute... I think YES the phone is capable of being assisted it's just that Samsung appear to have completely misconfigured and have forgotten to implement the gps data timeout :-(
definitely not something that would get past Steve Jobs....
i think we have nothing to do untill now except waiting a new firmware fixing this
Hi,
I use SwiftKey ($) as my standard keyboard on the S3 since the built in keyboard mostly stinks. But the one problem is the input method reverts to the Samsung keyboard when the device reboots. I searched around & couldn't find exactly what I was after, so thought I'd post my solution here to pay it forward. :angel:
Requirements:
Rooted phone (using SuperSU free)
Tasker ($)
Secure Settings (free)
Busybox (free)
Process:
0. before starting, install Secure Settings, go to system+ tab, click to enable. It will help you get busybox if not installed. Once installed, again go to system+ tab and get it Enabled.
1. create a tasker "Event" profile
2. Event type is System>Device Boot. There are no options here, tap to go back
3. New task, give it a name ("Change Input Method" is good)
4. + to create an action, then Task>Wait. I put 40 seconds here. This is the delay after reboot before tasker goes & changes the method. It takes a while for my phone to be ready to roll after a reboot. YMMV. Tap top left to go back.
5. Now + to add another action and select plugin
6. Secure Settings, pencil to modify configuration
7. System+ Actions>Input Method, tap to select the input method (Swiftkey for me but this could be anything you want).
8. Click the save icon.
That's it. Try rebooting and see if the input method is changed to Swiftkey after the reboot. Works for me! Enjoy! :laugh:
nil
zxaryo said:
Device : Redmi 1s Cm11 R19
I was trying to underclock the cpu clock speed using 'CPU Tuner', set values (min :300, max: 1094).
but after some time the MIN values automatically went up and got stuck at 11900,
i've tried fixing using the same app ,at perfomance section in settings, even flashed and installed CM11 again( complete)
no use
currently locked CPU clock speed using trikster MOD,
but i have to keep root permission on and set it again after every reeboot.
is there any way i can change to how it used to be?
plz help
thank you
Click to expand...
Click to collapse
install no frills cpu control from play store ( free ) > grant it super user permissions > then set the required min and max frequencies you would like to assign then go to the settings in the app and mark the option " prevent other app from changing the settings " > then come back to the main app screen mark the option set on boot and then reboot the device ...
if the above procedure works check in the settings> performance > cpu frequency (it should be the one you choosed)
if it didnt work then do a full wipe and reflash the rom and again follow the above steps then it should work for sure
solutions
Just flash another kernel..it works for me..