Related
Here are simple guides for root, unroot, clockwork mod and cyanogen. I am not responsible for damaged or bricked phones. I used this to fix my bricked Ace. It saved it.
Root:
1. download the root.zip file attatchment.
2. boot recovery, click install zip from sd card, find root.zip
3. install and reboot.
4. congrats! you have now got root!
Unroot:
1. download the unroot.zip file attatchment.
2. place file on sd card
3. boot recovery, click install zip from sd card, find unroot.zip
4. install and reboot.
5. you have unrooted!
Clockwork Mod Recovery:
1. download the ClockWorkModAce.zip http://www.4shared.com/zip/0kBAQmX5/ClockWorkModAce.html
2. make sure you have used the root.zip.
3. place file on sd card
4. boot recovery, click install zip from sd card, find ClockWorkModAce.zip
5. reboot recovery and you will have Cwm recovery!
Cyanogen Mod:
MAKE A BACKUP!!!
1. do above
2. download cyanogenace.zip http://www.multiupload.com/MZLA2ECCQ0
3. put on sd card
4. boot recovery, click install zip from sd card, find cyanogenace.zip
5. install. this may take a while.
6. you now have cyanogen mod for ace!
already made thread
check sticky
mv_style said:
already made thread
check sticky
Click to expand...
Click to collapse
But that uses odin and that..... this is more simple for the less experienced users
On sticky dude...i use that without odin...averytime
regards,
•ƒγяύs ργяσ™• Line id: pyronia
read thread again
this is more simple IMO ...the sticky one is so confusing ..the first time i read it i don't even understand ..even now i am still little confused since i dunno whats odin
my phone does't boot up after clockwork mod ... stuk at samsung galaxy ace logo... how do i do...
and it doesn't enter download mode..
flash the custom rom cyanogenace but in the link it may be different name. i used this to fix my mobile
windcanning said:
my phone does't boot up after clockwork mod ... stuk at samsung galaxy ace logo... how do i do...
and it doesn't enter download mode..
Click to expand...
Click to collapse
This guy uses a GT-S5830i , which uses the MSM7227A chip
Herpderp Defy.
GT-S5830 ONLY
Sent from my GT-S5830 using XDA App
This might be a stupid question for some of you but what is "cyanogen mod" ?
Never heard. Thanks
Can someone give a link for cwm for s5830L. Or is there a need for specific one, can I go on with the link here? Please help. Searched all over but no luck.
Sent from my U20i using XDA App
gengi said:
This might be a stupid question for some of you but what is "cyanogen mod" ?
Never heard. Thanks
Click to expand...
Click to collapse
ddz334 said:
Can someone give a link for cwm for s5830L. Or is there a need for specific one, can I go on with the link here? Please help. Searched all over but no luck.
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Cyanogen is a 3rd party, modified OS for your phone. It replaces your current Operating System and gives you tons of benefits. I found it hard to use stock after using CM because of what it offers
Here's a link to the features http://www.cyanogenmod.com/about/features
but it does offer more than what's mentioned on that page.
--
And Link to ClockworkMod... http://forum.xda-developers.com/attachment.php?attachmentid=743333&d=1318051346
Thank you ryant22. I have a doubt Can I flash any rom from cwm? Is there any process of changing the kernel or unlocking the bootloader or must use of odin? for sony ericsson x10 mini pro I had to do all that, so just to confirm.... please help
flashed with custom rom. successful and happy. thanks to all once again
Just picked up a S5830 in the UK.
Out of the box the device came with:
Android 2.3.6 build XWKT5
Baseband S5830NEKT2
SuperOneClick 2.3.3 does not work on this build, and I need root to remove simlock.
Is the root method in the OP working on all S5830 versions, or specific baseband/rom?
*update* Tried it and confirmed working on above phone.
Also please include instructions for n00bs on how to get into recovery mode on a stock S5830.
"Hold home button and Power on"
In stock recovery select "apply update from sdcard"
I can't download the cyanogenmod zip file. It seems that the link is dead or something. Could anyone give me this file?
"cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip"
Enviado desde mi GT-S5830L usando Tapatalk
rjosa said:
I can't download the cyanogenmod zip file. It seems that the link is dead or something. Could anyone give me this file?
"cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip"
Click to expand...
Click to collapse
That's an old build you would be better using a more up to date KANG
e.g.
[ROM] The End 3.0 (Updated 18/02/2012) (CM 7.2 RC0 KANG)
Download: http://www.mediafire.com/?ogtfzzo1polq72o
ddz334 said:
Thank you ryant22. I have a doubt Can I flash any rom from cwm? Is there any process of changing the kernel or unlocking the bootloader or must use of odin? for sony ericsson x10 mini pro I had to do all that, so just to confirm.... please help
flashed with custom rom. successful and happy. thanks to all once again
Click to expand...
Click to collapse
Oh, i did the same switch. From the mini pro to the galaxy ace. i was suprised that the phone came with a recovery built in. From what i've lernt, the kernals are flashed during the process of flashing a rom
ryant22 said:
Oh, i did the same switch. From the mini pro to the galaxy ace. i was suprised that the phone came with a recovery built in. From what i've lernt, the kernals are flashed during the process of flashing a rom
Click to expand...
Click to collapse
Yeaah..kernels are flashed in while. Noted it.
Sent from my U20i using XDA App
How to unroot ???
Suppose if the phone in rooted (By the same method specified here ) & if I modify/delete a few system apps, how am I supposed to unroot it ? Will it work (Of course, by the method specified here ) ? How are the system apps restored, do I have to check & install each & every one of it manually ?
Hi friends Finlay after hard work i find how to unlock Karbonn Smart A10
Required Files are:
1. Driver For karbonn A10 (I used Karbonn-A6-usb-driver-x86)
2. SRRoot
3. Mobile Uncle Apk
This are the steps:
1. Install Driver from below link
http://d-h.st/KNK
after install driver connect your mobile with pc and enable "Usb debugging" mode from "Developer Option" from Setting.
Now open SRRoot, and follow the step wriiten.
for me its not root my mobile in first try. but i try its second time and is Root success fully. 100%.
You can download from here
http://www.srsroot.com/supported
2. Unlock Boot loader or CWM Recovery mod
install Mobile Uncle APK from below link
http://d-h.st/oEj
Install APK file and close it.
download recovery file from below link and put it on your sdcard (not in any folder).
http://www.4shared.com/file/fes2PV-8/Karbonn-A10_130531__recovery_1.html
now open Mobile Uncle Tool and select "Flash Recovery From SD card" then mobile is restarted and its done
Thats its now your phone is unlocked and you can now update Custom Rom.
Enjoy :laugh:
Also thank for below user thats how i unlock CWM Recovery. from that you can manually unlock your device. Link is below...
http://forum.xda-developers.com/showthread.php?t=2379412
rooting works superbly...cwm didnt tried as i didnt need it..
boot loader not work
frinds is not work my boot loader not unlock please halp please solve this problam:crying:
Jasvinder singh dangi said:
frinds is not work my boot loader not unlock please halp please solve this problam:crying:
Click to expand...
Click to collapse
Did u root ur mobile if yes then follow the step no 2 in my post.:good:
Hello hemantparmarc!
I tried your method but the recovery image you linked was not working for me! It even over rode my stock recovery, so I was damn scared but then I tried the manual CWM recovery link and it helped.
But i must say that there are no custom roms available for Karbonn Smart A10.
You should check the linked recovery because it made my stock recovery bad. ( Now its CWM) and i even tried to rename them to boot.img, and recovery.img
If you do know about a rom, please post it.
adityadesai327 said:
Hello hemantparmarc!
I tried your method but the recovery image you linked was not working for me! It even over rode my stock recovery, so I was damn scared but then I tried the manual CWM recovery link and it helped.
But i must say that there are no custom roms available for Karbonn Smart A10.
You should check the linked recovery because it made my stock recovery bad. ( Now its CWM) and i even tried to rename them to boot.img, and recovery.img
If you do know about a rom, please post it.
Click to expand...
Click to collapse
---------------------------------------
sorry for currpeted ur Rom.
when i unlock my recovery, i backup my original boot.img, and i'm aware that my boot.img work on other Karbonn A10 smart device.
Use this link for more detail http://forum.xda-developers.com/showthread.php?t=2379412 . its work for me.
U should read that it and try above link .. may be its work for u also.
There is alos stock rom for Karbonn A10 link below
http://androidxda.com/download-karbonn-stock-rom-models
still u have any problem reply.. dont forget to flow the step in link http://forum.xda-developers.com/showthread.php?t=2379412 it 100% work for me and my CWM mode work properly
i could not have backed up my boot.img because i did not CWM installed, anyways now i do and now am hunting for a custom rom.
i can just port any mtk6577 rom but it could be risky and there is a battery prob with my phone, so a custom rom with 4.2.2 would worsen it further.
So i am staying put for this year and then gonna buy a moto g, x or e! depending on my score in the exams!!
cheers
my karbonn a10 are dead ........what to do..
pl'z post how to do after dead karbonn a10.....
hemrajdhoble said:
pl'z post how to do after dead karbonn a10.....
Click to expand...
Click to collapse
I never try it but you can use this link for restore
http://forum.xda-developers.com/showthread.php?t=2379412
from MTK Tools may be you can able to restore it.
for karbonn a10 rom use this link
http://androidxda.com/download-karbonn-stock-rom-models
**** I Soft-Bricked my phone!!!
Hey can you please give me a link for Karbonn-A10 rom that can be flashed from CWM....the one that you gave link for requires Flash Tool and my phone keeps disconnecting when i try to flash that ROM from Flash tool...So please can you give me a rom that i can flash directly from CWM recovery....please any help is highly appreciated:crying:
recovery mode not working
sir i had install mobile uncle tool in my device few days ago , after some period my recovery mode fastboot mode stop working please suggest me what can i do ???? mobile also not reseting frm settings plss help me
karbonn a10 backup rom size
Dear hemanth,
I rooted the karbonn a10 and installed cmw recovery also. But after back up,the backup file is only 49 mb. Please tell me is it OK or is there a problem with that.I want to try custom ROMs and xposed frameworks with this. So I might need proper back up. Please help with this.
Thanks
good work !
rajkumsr said:
Dear hemanth,
I rooted the karbonn a10 and installed cmw recovery also. But after back up,the backup file is only 49 mb. Please tell me is it OK or is there a problem with that.I want to try custom ROMs and xposed frameworks with this. So I might need proper back up. Please help with this.
Thanks
Click to expand...
Click to collapse
no the actual backup of rom is around 300MB it also created folder name "clockwork mode"
if any one who break karbonn A10 dont worry the solution is here.
download custom rom from below link:
http://androidxda.com/download-karbonn-stock-rom-models
and update the rom with step by step from below link:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
its working 100%. i breaked my phone and now its working as before.
Sir
I have rooted my karbonn A10 with framaroot. now i want to install custom rom. can i use any karboon stock rom, to this mobile. please help i am new to this
Q&A for [recovery] CWM RECOVERY for Micromax BOLT A67 [Fully Stable]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [recovery] CWM RECOVERY for Micromax BOLT A67 [Fully Stable]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP!
Axenrot52 said:
can you please provide the drivers ...........tried with sci, universal android drivers but with no luck...........
Click to expand...
Click to collapse
i have a phone micromax a67 with pattern lock i want to unlock it with pattern lock can u please tell me hoe to get into fast boot mode without accessing the phone as it is locked with pattern lock , i forgot the pattern code....
ankushjain0711 said:
i have a phone micromax a67 with pattern lock i want to unlock it with pattern lock can u please tell me hoe to get into fast boot mode without accessing the phone as it is locked with pattern lock , i forgot the pattern code....
Click to expand...
Click to collapse
Press volume down+ power button it will take u to fast boot
please help, when i extract the boot.img file in cwm.rar it says disk image file is corrupted
First root your mobile using baidu root.And the flash recovery.img using flshify app.No need of pc itz fully working.
Required Clockwork mod flashable stock ROM.zip for micromax a67 bolt
People,
On the very onset I would like to thank the developers for whatever bit of awesomeness we have got for this odd device, you guys \m/
Now, done with the prelude, now that we have a fully working clockwork mod recovery for the device, can anyone help me with getting the CWM flashable stock ROM (even a backup would do).
Well, now I am not a full time techie (a slightly glorified salesman instead,even though theoretically a Techie) and I could have pretty much done the backup from my current ROM but there are 2 glitches
1. I have fiddled a bit too much with the current loaded ROM (without even taking a backup,foolish careless me!!) with stuffs likeLCD density in the build.prop editor and what not and now all I have got is an unstable system
2. Tried downloading the full firmware and flashing it via research download tool but in vain (99% of tool versions fail to load the .pac file (factory stock rom) with the bin packet load fail error. Only one seems to load the ROM ( i have downloaded multiple ones from various sources like android xda, micromax fttp srvers etc, both for builds v 1.1.7 and 1.1.,mine is 1..1.8) but neither seems to work except on which loads up in spreadtrum upgrade tool (research download) but gos to an eternal waiting whilst flashing
3. I have got all the system files extracted though (from the downloaded .pac file), so if anybody can guide me on building a flashable zip with system.img , boot.img and user data.
any pointers/directions/help will be gladly appreciated and if you guys can help with a CWM flashable stock ROM zip file,then nothing like it,
Eagerly waiting for a ray of hope. Cheerio.
Thanks buddy..... (Y)
PhilZTouch 6 based on CWM v6.0.5.1 for A210
All the credit for this goes to @Phil3759 for his PhilZ Touch Recovery -->http://forum.xda-developers.com/showthread.php?t=2201860
@yuweng for Compiling it for mt65xx devices and instructions for porting it:http://forum.xda-developers.com/showthread.php?t=2748169
So go to their respective threads and Thank them , because this won't be possible without them!!!!!!!!!!!!
I've tested this recovery on my phone , it mounts both the sdcards (internal and external)!!
the backup and restore options are also tested and working perfectly!!!!!!And If You Like MY Work PLEASE Press Thanks!
XDA:DevDB Information
PhilzTouch Recovery 6, Tool/Utility for the Micromax Canvas 4 A210
Contributors
Prometheus
Version Information
Status: Testing
Created 2015-03-18
Last Updated 2015-03-18
Reserved
Downloads:
http://d-h.st/7wJn
How To Flash/Instructions:
By Flashify;
1.Download Flashify from Playstore.
2.Open it and grant it root access.
3.Select recovery option.
4.Select Choose a file and navigate to the location where you saved the recovery image and select it.
5.Confirm the flashing and it will be flashed to your phone.
6.When done select reboot to recovery.Done.
By MobileUncle Tools:
1.Download Mobileuncle Tools from Playstore.
2.Rename the recovery file to 'recovery.img' and place it in root of your SDcard.
3.Open MobileUncle Tools and grant root access.
4.Select recovery update from the menu.
5.Select recovery.img and confirm the flashing.
6.Done.
Enjoy Folks.
Reserved
This Recovery flashes KitKat Roms Perfectly.
But Before Flashing There a few Steps/Cautions To be taken:
1.After downloading the rom replace the update binary in
\META-INF\com\google\android with the one I am providing.
2.Open updater script in exact same location as above and search for line that starts with 'assert', and delete those lines from updater script.
Doing the above steps is necessary or the recovery wont flash KitKat Roms.
Above Procedure is only for KK roms. JB roms do not reqiure this or any other procedure other than flashing
After Doing Above Procedure I myself flashed and checked CM,PAC & AOSB. They flashed perfectly and worked flawlessly.
Prometheus said:
This Recovery flashes KitKat Roms Perfectly.
But Before Flashing There a few Steps/Cautions To be taken:
1.After downloading the rom replace the update binary in
\META-INF\com\google\android with the one I am providing.
2.Open updater script in exact same location as above and search for line that starts with 'assert', and delete those lines from updater script.
Doing the above steps is necessary or the recovery wont flash KitKat Roms.
Above Procedure is only for KK roms. JB roms do not reqiure this or any other procedure other than flashing
After Doing Above Procedure I myself flashed and checked CM,PAC & AOSB. They flashed perfectly and worked flawlessly.
Click to expand...
Click to collapse
Can you suggest stable functional KitKat ROM for Canvas 4
satsmagic said:
Can you suggest stable functional KitKat ROM for Canvas 4
Click to expand...
Click to collapse
On personal experience, I would say cm v0.17 is the most stable kitkat rom for canvas 4.
Can be flashed via SP Tools too!! :good:
Loving the recovery lock feature!!
Awesome port bro!! :good: :good:
Prometheus said:
On personal experience, I would say cm v0.17 is the most stable kitkat rom for canvas 4.
Click to expand...
Click to collapse
Thanks, i checked tht ROM has subsequent verisons CM11 ver 0.9 and CM11 NextGen ver 0.1
Shouldnt the subsequent versions be better ???
Below is the link
http://forum.xda-developers.com/showthread.php?t=2676086
satsmagic said:
Thanks, i checked tht ROM has subsequent verisons CM11 ver 0.9 and CM11 NextGen ver 0.1
Shouldnt the subsequent versions be better ???
Below is the link
http://forum.xda-developers.com/showthread.php?t=2676086
Click to expand...
Click to collapse
You can see the changelog.. 0.19 does not hv wifi hotspot..n nxtgen has some ram management issues..both of which are not the in cyanogen 0.17
Its working and probably bug less... Thanks nice work:thumbup::thumbup:
Sent from my A210 using XDA Free mobile app
Sparkenstein said:
Its working and probably bug less... Thanks nice work:thumbup::thumbup:
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
I am pretty sure it's bugless.. I've been using it for four to give days now.. Tried everything..
Anyhow, if u find any bugs let me know..I'll try to solve them
Nice work.. You can even restore nandroid backup taken by CWM recovery too.
Can you give details what advance and new functions do? Am pretty newbie to some functions!
Sent from my a210 using XDA Free mobile app
@Prometheus there is no "FIX PERMISSION" option in this recovery. or is it there by some other name
and also i am unable to go back to CWM recovery, by flashing the same with Mobile uncle MTK tools
satsmagic said:
@Prometheus there is no "FIX PERMISSION" option in this recovery. or is it there by some other name
and also i am unable to go back to CWM recovery, by flashing the same with Mobile uncle MTK tools
Click to expand...
Click to collapse
Try Rashr or flashify
Prometheus said:
Try Rashr or flashify
Click to expand...
Click to collapse
Can you please elaborate the installation of the updater script I mean the path file . [emoji3]
and the touch isnt working help pls
Hi,
I own a Canvas 4 (A210).
I downloaded Philz recovery from the link http://d-h.st/dw3.
But instead of downloading from the DOWNLOAD NOW BUTTON, i did it from the DOWNLOAD BUTTON.
The file size was only 206 KB. I didn't observe this and this was my mistake.
i flashed the same through Mobile Uncle Tool and after flashing the screen started flickering, and got struck in the logo screen.
i rebooted the same, but no change.
I flashed custom Rom through SP tools and booted, but the touch screen was flipped and the touch Erratic. and was unable to go ahead the setup screen.
I tried flashing the Recovery from the link you have posted and was successful, but the main problem remained.
I tried flashing different ROM's , but the touch screen problem remained.
The handset was sent to service center and they said that the touch screen needs to be replaced and would cost 3000 + 1 month warranty.
I am now on stock ROM with setup screen.
I read at the link posted below that there is a manual mode available to set the resolution.
http://forum.xda-developers.com/showthread.php?t=2748169.
Is is possible for me to do it ( i am no software engineer)
Or my only option is get the screen replaced.
Please help me out
superna
thanks
Can u please provide me link for twrp
patil4541 said:
Can u please provide me link for twrp
Click to expand...
Click to collapse
TWRP is not yet developed for our device
Hello there,
i have rooted my canvas a1 lollipop 5.1, so i came here to help you to root your lollipop 5.1 if you dont know how to.
-> download the UPDATE-SuperSU-v2.45
-> place the file in the sdcard
-> Reboot into your custom recovery
-> choose install zip, choose the downloaded zip file and install it
-> [if CWM recovery ask to fix anything like [fix system/xbin/su...] then select No
-> Reboot your phone and your phone will be rooted
//This method may be working for other android one devices, if working please comment here
//DONT POINT AT ME FOR YOUR BAD LUCK/MISTAKE
DOWNLOAD THE GIVEN ATTACHMENT
bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help
Cant help
jaspalsingh said:
bro can you make a recovery for xolo one lollipop 5.0
this is link for stock recovery based on lollipop https://drive.google.com/file/d/0B77YgBXvZB2kc3UybzRtTXRCaUk/view
if you want boot image i will upload pls help
Click to expand...
Click to collapse
Sorry i cant help you in this matter.
help
I'm new bro kindly help me I tried all ways to root my phone but can't hope this works
I have à1 with lollipop how to reboot to custom recovery.?
visit this page
http://forum.xda-developers.com/canvas-a1/help/guide-root-android-5-1-lollipop-t3064642
redirected to current page
I have downloaded the zip file what next .?? I placed it in SD card what shud I do now reply fast plzz
http://forum.xda-developers.com/canvas-a1/help/root-everything-scratch-extreme-t3066260
Read again the rooting process from the given link
Signature verification failed
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.
abuvbu said:
Hi,
I followed all steps correctly but when i tried to install the super SU zip file i encountered an error saying "Signature Verification failed" and installation aborted . What may be the issue, any advices please.
Click to expand...
Click to collapse
Toggle signature verification in cwm and then install
Cant toggle signature verification
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need a custom recovery to flash SuperSU and you have the stock recovery.
i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??
abuvbu said:
i used the recovery provided in the rooting procedure above.... also i cannot find cwm recovery on the internet for Mmx a1.... should i try looking for twrp ??
Click to expand...
Click to collapse
Flash Philz recovery from here http://forum.xda-developers.com/cro.../tut-how-to-root-android-one-devices-t2928240 . follow this guide worked for me on android L
Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....
Custom Recovery Required
abuvbu said:
Hi,
When i go into recovery, i see an android laying with exclamation mark and it says no command beneath, then i have to press power and volume up button to open menu, i am attaching the screens can please take a look at it.
I did some R&D over the internet and i got to know the there is an option called install from zip under one can toggle signature verification but i cant find that option in my recovery module.
Also the recovery menu dosent look like any cwm recovery interface.
Click to expand...
Click to collapse
You need to flash the file using a custom recovery.
abuvbu said:
Hi,
Thank you philz was a success. I have another phone MMX canvas 4plus A315. Will this philz work on the phone too....
Click to expand...
Click to collapse
No.this recovery only works on Android one phone.
Can you upload your "build.prop file " which is inside the system folder.
I need it. Actually my phone has been bricked, so i want android one default build.prop file.
Thanks for your help.
How to root
Can I use this file to root Micromax canvas spark 2 without unlocking the bootloader. Plz help me to root it...I tried kingroot many times with the latest and the old versions. .But all of them failed.
Help
my canvas a1 is running on 5.1.1
bro plz tell me how to boot into custom recovery mode.
because have read that to install custom recovery your device should be rooted?
Hi I have micromax e 471 , I want to root my cell, but don't know how to do it