Develop Bugs

What is the Most Stable JB ROM so far?

I got the flashing & customization itch and want to reflash my nexus with a customize ROM that will allow me to download themes. However, I want a ROM that is stable.
Any ideas?

man, this is what the 4th one so far today guys?
they are all stable and rock, try them all!
(in before close)

stock.

the one im using. stock is good, aosp, rasbean both good. but i suggest that you try out a few and find what you like.
---------- Post added at 07:23 PM ---------- Previous post was at 07:20 PM ----------
Zepius said:
stock.
Click to expand...
Click to collapse
omg!!
while that is your standard answer, its still a good reply. i just cant believe that you didnt answer with "read my signature". hell must be freezing over right now!

Can we port paranoid android ROM to our N2? With working s pen?

Sent from my SGH-T889 using xda premium

im not seeing any aosp action happening for the tmobile variant yet which is kinda disappointing but i do know a at&t version is being worked on and i tried it the other day, it's good and works for the most part. you just have to flash our radio after installing the rom. hopefully we will get some aosp/aokp roms soon enough.

Could you send me the link to that version?
Sent from my SGH-T889 using xda premium

fix-this! said:
im not seeing any aosp action happening for the tmobile variant yet which is kinda disappointing but i do know a at&t version is being worked on and i tried it the other day, it's good and works for the most part. you just have to flash our radio after installing the rom. hopefully we will get some aosp/aokp roms soon enough.
Click to expand...
Click to collapse
been kinda searching around the forums, but haven't come across a recovery flashable modem.. i've got the bin file to flash via odin or heimdall.. but haven't seen a zip anywhere..

pvtjoker42 said:
been kinda searching around the forums, but haven't come across a recovery flashable modem.. i've got the bin file to flash via odin or heimdall.. but haven't seen a zip anywhere..
Click to expand...
Click to collapse
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.

darkierawr said:
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.
Click to expand...
Click to collapse
Thanks Darkie.. been watching the CM10 thread on the AT&T side all day.. Been watching the PA thread as well.
nevermind.. found the modem.zip..

Have u guys seen this yet?
JellyBeer with Multi dpi groups
Wanna try flashing..
---------- Post added at 09:18 PM ---------- Previous post was at 09:16 PM ----------
darkierawr said:
Hey Joker.
And OP, PA is being merged with the latest fixes for CM10 in the ATT forums.
madmack got freaking everything working. What an update.
Click to expand...
Click to collapse
Hmm.. am I crazy? looking on the AT&T section and not seeing it..
EDIT: Unless this is it.. http://forum.xda-developers.com/showthread.php?t=1970335

decalex said:
Have u guys seen this yet?
JellyBeer with Multi dpi groups
Wanna try flashing..
Click to expand...
Click to collapse
Looks amazing, did you try it?

konceptz said:
Looks amazing, did you try it?
Click to expand...
Click to collapse
Going to flash in a few and see
Sent from my SGH-T889 using Tapatalk 2

decalex said:
Going to flash in a few and see
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Can't wait!
I'm assuming you flash in the proper fashion and then flash the t mobile modem?
Or are you going back to stock and then flashing forward?

konceptz said:
Can't wait!
I'm assuming you flash in the proper fashion and then flash the t mobile modem?
Or are you going back to stock and then flashing forward?
Click to expand...
Click to collapse
Yes.. the first one. No go tho without some other modification. Getprop fail in the script since not supported device..
Restoring nandroid now -- was gonna try flashing something else, but can't get my sdcard to mount (or adb to recognize) while in cwr.
---------- Post added at 11:50 PM ---------- Previous post was at 10:55 PM ----------
EDITs (abridged).
Flashed MIUI (just for kicks), odin'd modem (since flashable wasn't working).
Booted fine.. looked great. Everything seemed to be working, including S-Pen, except for Sound and calls (lol). Outgoing calls might have been working, but got no audio. Permissions manager was freaking out too.. tons of related FCs. Anyway.. was nice to see it on the Note 2.
Reading thru the thread now.. and see the permissions and calls are a known issue.

[Q] Galaxy S3 (SGH-T999L) -- assert error when flashing from bootloader

Hello everyone, first off I want to say I have flashed many different phones with CM over the past few years. I have been a fan of android phones since Day 1. I got a G1 the day they came out and was pretty active in the scene up about about 2 years ago. I had a G2 for awhile as well, loved it... had CM on it as well. Anyway, the problem at hand is this Galaxy S III.
I have flashed many phones for friends and co-workers and whomever asks. I have NEVER had such a problem with flashing a phone as this one.
Apparently its a regionally special model (SGH-T999L).
I have downloaded CWM 6.0.3.1 after rooting with motochopper (easiest root experience ever), then I attempted to flash to CM10.1.2. The phone is currently on 4.1.2. When I attempt to flash from CWM, it gives the assert failed error. I have seen a few other threads about this but they were regarding other carriers (AT&T) and honestly I have tried a million and one things in attempt to get this to flash, I have seriously spent over 8 hours today trying to get this flashed to CM10.1.2 and even 10.1, I even tried using the touch version of CWM and tried TWRP to see if I'd get a different result... But no.. same result.
Does anyone know how to resolve this issue? I have tried everything I can think of on all three platforms... Win7, MacOSX 10.6.8 and Ubuntu 10 and 12.... cannot get it to flash to CM no matter what. I am almost positive it is something I am overlooking. If anyone knows how to get past this please let me know, I will gladly send you a present via fedex.
Thanks in advance.
Senor Y.

This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium

Thanks, I figured it was something stupid like that. I will fire up my windows VM and grab Notepad++ and get down to business.
Senor Y.
DocHoliday77 said:
This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse

Posted cm 10.1.2 in the T999L q&a thread. Edited to work on T999L.
Sent from my SGH-T999 using xda premium

Thanks again man, I followed your instructions and removed the assert lines... flashed with 10.1.2 -- then flashed the gapps back on and in business on the first try.
I am going to pass the link along to #Cyanogenmod on freenode because there wasn't anyone on there who could help me last night.
Senor Y.

Doc,
One last question, is there a baseband update I need to apply for CM10.1.2 / 4.2.2 ? -- I got the gapps installed and there doesn't appear to be problems yet, but the know-it-alls in #cyanogenmod seem to think I need to install a baseband update but they cannot provide me with a link... so I was wondering what your take on that is.
Thanks again,
Senor Y.
DocHoliday77 said:
This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse

senory said:
Doc,
One last question, is there a baseband update I need to apply for CM10.1.2 / 4.2.2 ? -- I got the gapps installed and there doesn't appear to be problems yet, but the know-it-alls in #cyanogenmod seem to think I need to install a baseband update but they cannot provide me with a link... so I was wondering what your take on that is.
Thanks again,
Senor Y.
Click to expand...
Click to collapse
It's bad advice. Ignore it.

Very bad advice! !!
Baseband is your modem which should have nothing to do with your rom. They probably meant bootloader. But the T999L only has one version of firmware available right now, so it wouldn't be possible anyway. Theyd probably tell you to use MD5, but that would brick your phone!
Glad you asked!
Sent from my SGH-T999 using xda premium

FYI, (as stated before), the Nightly builds work with the MB7 bootloader

I thought i had an issue w/ the radio this morning, but it turned out to be a fluke... a reboot resolved it...
Thanks,
senor y.

help
what line did you delete exactly. what i mean is exactly from 'what' to 'what' did you take out? please and thank you

[Q] beanstalk 4.3 installation order

I was going to try beanstalk 4.3 and am unsure about the order to do the installation. Do I flash the hercules recovery zip, back up ROM, wipe phone, flash rom , flash gapps, in that order?

Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone

kj2112 said:
Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone
Click to expand...
Click to collapse
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.

sloerthinmost said:
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.
Click to expand...
Click to collapse
Always best to do what the OP says....in most cases....rather than have people who may not even know what they are doing tell you different.
Sent from my cellular telephone
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
Just make sure you understand what you're reading before you do anything...or things can go bad.
Sent from my cellular telephone

[Q] setup wizard has stopped.blame tylor

after rom installation,boot animation was normal but on welcome screen i'm facing forced stoppage of setup wizard
[OFFICIAL] [Nightlies] [Maguro] PAC-Man 4.3
what to do ..???

Do what it says and blame Tyler. lol
What gapps are you using?

gapps 4.3
there is a link given for gapps also along with rom file

Sheraz gehlan said:
there is a link given for gapps also along with rom file
Click to expand...
Click to collapse
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
http://goo.im/gapps
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.

used the same
jsgraphicart said:
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.[/QUOT
what else i can do ..??
Click to expand...
Click to collapse

Sheraz gehlan said:
what else i can do ..??
Click to expand...
Click to collapse
So it didnt work? Same thing happened? Something obviously isnt working right then. Have you tried any other ROMs? Maybe its an issue with the ROM. Again, I havent used that ROM so I dont know.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
Also, are you using the right ROM for your phone. There are 3 different types. Verizon, Sprint and Unlocked GSM versions. I see you used Maguro. So I assume you arent on Sprint or Verizon.

its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/

Sheraz gehlan said:
its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/
Click to expand...
Click to collapse
If you are using all the right stuff, then you should have no issues as long as you are wiping everything before flashing. You say you are so I don't know what is causing your problem.
By the way. I just looked at your screenshot again. I would suggest plugging your phone in while doing all this. You dont want your phone to die in the middle of wiping/flashing. That will cause problems.
---------- Post added at 03:02 PM ---------- Previous post was at 02:05 PM ----------
Just had a thought. If you are not using the latest recovery, it could maybe be causing issues. Whether its TWRP or CWM, make sure you are using the latest.