I was going to try beanstalk 4.3 and am unsure about the order to do the installation. Do I flash the hercules recovery zip, back up ROM, wipe phone, flash rom , flash gapps, in that order?
Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone
kj2112 said:
Did you read the OP in the Beanstalk thread?? Might help.
Sent from my cellular telephone
Click to expand...
Click to collapse
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.
sloerthinmost said:
Yes I did and it say to do it in that order. I thought that seemed odd, so I would ask.
Click to expand...
Click to collapse
Always best to do what the OP says....in most cases....rather than have people who may not even know what they are doing tell you different.
Sent from my cellular telephone
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
Just make sure you understand what you're reading before you do anything...or things can go bad.
Sent from my cellular telephone
Related
http://forum.xda-developers.com/showthread.php?t=1948034&page=35
I can't post to the thread because I haven't posted enough on XDA to post in developer threads yet apparently. Needless to say the latest PAC MAN release, wifi is broken.
There is one person who asks "Why is wifi still broken?" but it seems to have been glanced over. I have fully wiped and installed, and Wifi is in a permanent state of starting, scanning, turning off, turning back on, scanning, turning off, turning back on, scanning, ... in an infinite loop. It did this when I upgraded from 20.0, and did it after I did a full wipe as well.
I'm trying to find a 4.2.x rom that has preferably all the hardware working (wifi, camera, and bluetooth being the most important short of the phone functionality) that doesn't suffer from the random lockscreen reboot. If someone has a suggestion on which PrimoC Rom fits that bill please let me know.
I apologize for not posting this in the appropriate place, but I'm not allowed to post it in an the appropriate place until I post more.
... It would be nice if someone could mention this to inyourface to let him know, since you know, I can't.
http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)
lilrob1213 said:
http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)
Click to expand...
Click to collapse
I thought all CDMA development was in the CDMA development forum, I didn't know PrimoC builds were in the "Original Android Development" that makes things a little more confusing.
superdug said:
I thought all CDMA development was in the CDMA development forum, I didn't know PrimoC builds were in the "Original Android Development" that makes things a little more confusing.
Click to expand...
Click to collapse
Sorry 'bout that. Bluetooth works to an extent. Audio from calls isn't being routed correctly so you don't hear anything through a Bluetooth headset when someone calls you and visa versa.
Sent from my One V using Tapatalk 2
superdug said:
... It would be nice if someone could mention this to inyourface to let him know, since you know, I can't.
Click to expand...
Click to collapse
superdug said:
http://forum.xda-developers.com/showthread.php?t=1948034&page=35
I can't post to the thread because I haven't posted enough on XDA to post in developer threads yet apparently. Needless to say the latest PAC MAN release, wifi is broken.
There is one person who asks "Why is wifi still broken?" but it seems to have been glanced over. I have fully wiped and installed, and Wifi is in a permanent state of starting, scanning, turning off, turning back on, scanning, turning off, turning back on, scanning, ... in an infinite loop. It did this when I upgraded from 20.0, and did it after I did a full wipe as well.
I'm trying to find a 4.2.x rom that has preferably all the hardware working (wifi, camera, and bluetooth being the most important short of the phone functionality) that doesn't suffer from the random lockscreen reboot. If someone has a suggestion on which PrimoC Rom fits that bill please let me know.
I apologize for not posting this in the appropriate place, but I'm not allowed to post it in an the appropriate place until I post more.
Click to expand...
Click to collapse
He knows, it's not working on either version of the ROM. PrimoU or PrimoC. He's working on other things too, just be patient guys! Try v19.3 in the meantime. It's fully stable, and my daily driver. I love it!
---------- Post added at 01:14 PM ---------- Previous post was at 01:10 PM ----------
lilrob1213 said:
http://forum.xda-developers.com/showthread.php?t=2173524
it's 4.2 and camera (3MP) works but I'm not sure about bluetooth although I doubt it cuz I haven't even found a 4.1 rom that it works with I actually prefer Provision http://forum.xda-developers.com/showthread.php?t=2098618 though or even Pacman 19.3... be sure whatever rom you use to flash the boot.img that it says to flash and if you need a kernel that is a zip file flash that too (it will have the modules for wifi)
Click to expand...
Click to collapse
Bluetooth works in 19.3. As for the kernel, it's the 'boot.img' thats in the zip file. It's usually in the .zip with the ROM
Same Problem...
I have the same problem... But I come from Cyanogen 10.1 and it was working fine. The thing is that it does conect to some free wifi connections like mcdonald's one but not to my home wifi... I will try to install back CM 10.1 and see what happens.
---------- Post added at 12:44 PM ---------- Previous post was at 11:54 AM ----------
Ok everything is ok with CM 10.1 restored... I'm going to try installing Pac rom without doing a format system before and see what happens...
PS: I'm on sony xperia SP c5303 if some cares...
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
" I'm going to try installing Pac rom without doing a format system before and see what happens..."
This didn't work... Wifi isn't working so I think i'm just going to ask some PACrom staff some help...:crying:
If someone have a solution...
robbyus1111 said:
I have the same problem... But I come from Cyanogen 10.1 and it was working fine. The thing is that it does conect to some free wifi connections like mcdonald's one but not to my home wifi... I will try to install back CM 10.1 and see what happens.
---------- Post added at 12:44 PM ---------- Previous post was at 11:54 AM ----------
Ok everything is ok with CM 10.1 restored... I'm going to try installing Pac rom without doing a format system before and see what happens...
PS: I'm on sony xperia SP c5303 if some cares...
---------- Post added at 12:58 PM ---------- Previous post was at 12:44 PM ----------
" I'm going to try installing Pac rom without doing a format system before and see what happens..."
This didn't work... Wifi isn't working so I think i'm just going to ask some PACrom staff some help...:crying:
If someone have a solution...
Click to expand...
Click to collapse
Ooookkkaayyy.....
1. Please try to avoid reviving dead threads unless you truly have a reason
2. Please post problems in THAT devices forum as I imagine very few HTC One V users are aware of Sony Xperia SP development
3. Sometimes ROMs have bugs. Accept that.
Gloups! Sorry!
I thought I was in the xperia sp forum when I wrote that...
Sorry :-[
Sent from my C5303 using XDA Premium 4 mobile app
Hello everyone, first off I want to say I have flashed many different phones with CM over the past few years. I have been a fan of android phones since Day 1. I got a G1 the day they came out and was pretty active in the scene up about about 2 years ago. I had a G2 for awhile as well, loved it... had CM on it as well. Anyway, the problem at hand is this Galaxy S III.
I have flashed many phones for friends and co-workers and whomever asks. I have NEVER had such a problem with flashing a phone as this one.
Apparently its a regionally special model (SGH-T999L).
I have downloaded CWM 6.0.3.1 after rooting with motochopper (easiest root experience ever), then I attempted to flash to CM10.1.2. The phone is currently on 4.1.2. When I attempt to flash from CWM, it gives the assert failed error. I have seen a few other threads about this but they were regarding other carriers (AT&T) and honestly I have tried a million and one things in attempt to get this to flash, I have seriously spent over 8 hours today trying to get this flashed to CM10.1.2 and even 10.1, I even tried using the touch version of CWM and tried TWRP to see if I'd get a different result... But no.. same result.
Does anyone know how to resolve this issue? I have tried everything I can think of on all three platforms... Win7, MacOSX 10.6.8 and Ubuntu 10 and 12.... cannot get it to flash to CM no matter what. I am almost positive it is something I am overlooking. If anyone knows how to get past this please let me know, I will gladly send you a present via fedex.
Thanks in advance.
Senor Y.
This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium
Thanks, I figured it was something stupid like that. I will fire up my windows VM and grab Notepad++ and get down to business.
Senor Y.
DocHoliday77 said:
This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Posted cm 10.1.2 in the T999L q&a thread. Edited to work on T999L.
Sent from my SGH-T999 using xda premium
Thanks again man, I followed your instructions and removed the assert lines... flashed with 10.1.2 -- then flashed the gapps back on and in business on the first try.
I am going to pass the link along to #Cyanogenmod on freenode because there wasn't anyone on there who could help me last night.
Senor Y.
Doc,
One last question, is there a baseband update I need to apply for CM10.1.2 / 4.2.2 ? -- I got the gapps installed and there doesn't appear to be problems yet, but the know-it-alls in #cyanogenmod seem to think I need to install a baseband update but they cannot provide me with a link... so I was wondering what your take on that is.
Thanks again,
Senor Y.
DocHoliday77 said:
This is covered in my T999L q&a thread.
Sent from my SGH-T999 using xda premium
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
http://forum.xda-developers.com/showthread.php?t=2370981
Basically in some roms, particularly cm and aosp roms they check the bootloader to make sure its up to date. The T999L is just so new that many devs have not yet added its bootloader to the updater-script. Read the info I have in the thread I linked and if you need help editing the script, let me know.
Ill try to fix and upload the rom shortly, just to make it easy for everyone.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
senory said:
Doc,
One last question, is there a baseband update I need to apply for CM10.1.2 / 4.2.2 ? -- I got the gapps installed and there doesn't appear to be problems yet, but the know-it-alls in #cyanogenmod seem to think I need to install a baseband update but they cannot provide me with a link... so I was wondering what your take on that is.
Thanks again,
Senor Y.
Click to expand...
Click to collapse
It's bad advice. Ignore it.
Very bad advice! !!
Baseband is your modem which should have nothing to do with your rom. They probably meant bootloader. But the T999L only has one version of firmware available right now, so it wouldn't be possible anyway. Theyd probably tell you to use MD5, but that would brick your phone!
Glad you asked!
Sent from my SGH-T999 using xda premium
FYI, (as stated before), the Nightly builds work with the MB7 bootloader
I thought i had an issue w/ the radio this morning, but it turned out to be a fluke... a reboot resolved it...
Thanks,
senor y.
help
what line did you delete exactly. what i mean is exactly from 'what' to 'what' did you take out? please and thank you
after rom installation,boot animation was normal but on welcome screen i'm facing forced stoppage of setup wizard
[OFFICIAL] [Nightlies] [Maguro] PAC-Man 4.3
what to do ..???
Do what it says and blame Tyler. lol
What gapps are you using?
gapps 4.3
there is a link given for gapps also along with rom file
Sheraz gehlan said:
there is a link given for gapps also along with rom file
Click to expand...
Click to collapse
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
http://goo.im/gapps
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.
used the same
jsgraphicart said:
Well I havent used that ROM and dont know what Gapps they supply you with. But maybe try these, if the ones you have are different:
Download the 4.3 ones right at the top and wipe data, cache and dalvik and flash everything again.[/QUOT
what else i can do ..??
Click to expand...
Click to collapse
Sheraz gehlan said:
what else i can do ..??
Click to expand...
Click to collapse
So it didnt work? Same thing happened? Something obviously isnt working right then. Have you tried any other ROMs? Maybe its an issue with the ROM. Again, I havent used that ROM so I dont know.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
Also, are you using the right ROM for your phone. There are 3 different types. Verizon, Sprint and Unlocked GSM versions. I see you used Maguro. So I assume you arent on Sprint or Verizon.
its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/
Sheraz gehlan said:
its GSM samsung galaxy nexus ...i tried the right one
now i'm using paranoid 3+
But facing many bugs :/
Click to expand...
Click to collapse
If you are using all the right stuff, then you should have no issues as long as you are wiping everything before flashing. You say you are so I don't know what is causing your problem.
By the way. I just looked at your screenshot again. I would suggest plugging your phone in while doing all this. You dont want your phone to die in the middle of wiping/flashing. That will cause problems.
---------- Post added at 03:02 PM ---------- Previous post was at 02:05 PM ----------
Just had a thought. If you are not using the latest recovery, it could maybe be causing issues. Whether its TWRP or CWM, make sure you are using the latest.
Well for some reason the thread vanished, I have no idea what happened. But to continue where we left off...
Quote:
Originally Posted by Neroga View Post
Look for banks unofficial 4.3 gapps through Google. Less bloat and a smaller file size (~17mb). Most stable gapps package I've used across all of my past devices and the OG Pro.
Sent from my Carbon 4.3 LG-E980
Is it this?
http://nexus4.longren.org/banks/4.3-testing/
---------- Post added at 09:41 PM ---------- Previous post was at 09:40 PM ----------
Quote:
Originally Posted by bmoench51 View Post
*insert explitive here*
I flashed Carbon and now it won't load past the boot screen. Please tell me that there's a fix for this.
Would a hard factory reset fix it?
____________________________________________
Please disregard. Had to wipe everything and clear caches. Carbon is up and running!
Have you checked to see if you have audio in calls? That's something of a topic lately.
bmoench51 said:
Well for some reason the thread vanished, I have no idea what happened. But to continue where we left off...
Quote:
Originally Posted by Neroga View Post
Look for banks unofficial 4.3 gapps through Google. Less bloat and a smaller file size (~17mb). Most stable gapps package I've used across all of my past devices and the OG Pro.
Sent from my Carbon 4.3 LG-E980
Is it this?
http://nexus4.longren.org/banks/4.3-testing/
---------- Post added at 09:41 PM ---------- Previous post was at 09:40 PM ----------
Quote:
Originally Posted by bmoench51 View Post
*insert explitive here*
I flashed Carbon and now it won't load past the boot screen. Please tell me that there's a fix for this.
Would a hard factory reset fix it?
____________________________________________
Please disregard. Had to wipe everything and clear caches. Carbon is up and running!
Have you checked to see if you have audio in calls? That's something of a topic lately.
Click to expand...
Click to collapse
I have a suspicion that it might have vanished by design, because "Best ROM?" threads are one of the XDA Cardinal Sins.
donalgodon said:
I have a suspicion that it might have vanished by design, because "Best ROM?" threads are one of the XDA Cardinal Sins.
Click to expand...
Click to collapse
Mehh...that's annoying. I'll change the title xD
Is there any way to regain use of the Q button with carbon?
Banks 4.3 gapps can be found, here: http://www.androidfilehost.com/?fid=23189362627839747
No to the Q button but it can be used with Secure Settings Pro.
Sent from my Carbon 4.3 LG-E980
I have read that it is possible to boot 2 roms at once? have searched around but the only thing i see if for the i9300 i believe and just curious if i can get it to work on my i747m so i can try another rom without having to get rid of mine and re-flash.... :S
Currently running Dirty Unicorns 8.1 and wanting to try slimkat and just figure it would be neat to be able to boot into either one without having to flash every time....
Any help would be appreciated!
I haven't tried it yet, but here's the thread: http://forum.xda-developers.com/showthread.php?t=2684052
Im running it right now. Just search XDA for TWRP multiboot, it will be version 2.8.3.0 I believe and flash it in recovery
---------- Post added at 12:08 AM ---------- Previous post was at 12:02 AM ----------
jason2678 said:
I haven't tried it yet, but here's the thread: http://forum.xda-developers.com/showthread.php?t=2684052
Click to expand...
Click to collapse
wow, don't know how I missed this, its exactly what I was referring to